High performance V-belt XPZ EPDM datum length 1550 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091550

Frequency:50 Hz
Speed:2860 1/min
Shaft Output:969 W
Volume Flow:907 m³/h
Pressure:Δp s2560 Pa
Pressure:Δp t2702 Pa
Density:43862 kg/m³
Sound Pressure:81 dB(A

With Filter Mat Weight:2,38

Length : 300 mm
BAR-ES-23-300-25-2M6-NW-B
SKU: SBAQA100020-300
Magnet quality: GSN-52
Interface/connection dim's: Threaded hole M6 (2x)
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

L02A.. – L02C.. – L02D.. General features
Code LT312U: power supply transformer 230/12V 50/60Hz 3VA;
Code LS130: NTC10k probe;
Code LS120: PTC1000 probe;
Code LS140: PT100 probe;
Code LS150: thermocouple J probe.
Electric features
Power supply: 12Vac/dc ± 10%, 2W (L02AI-/L02CI-/L02DI-)
Power supply: 110 – 230Va c±10%, 50/60Hz, 3W (L02AM-/L02CM-/L02DM-)

Linear ball bearing KB-3 ISO series 3 with shields for shaft Ø 50mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Other, self-aligning versions on request. Stainless version on request.

Article ID: 64605000

Handheld tyre gauge, car tyre valve connector, Pressure gauge Ø80, uncalibrated, 0-12 bar/170 psi, Plug-in nipple I.D. 7.2
These pressure gauges are effectively protected against shock and impact by means of a free-standing plastic cap. They can be loaded against gauge pressure and up to the maximum scale value.
With push-in plug for DN 7.2 coupling.

Adjustable T screw fitting, cone seal, 360° swivel range, female nut M20x1.5 i., Pipe ext. Ø 12, PN max. 630 bar, galvanised steel

Soft PVC workshop hose set, Quick-connect coupling I.D. 7.2, Hose Ø 14.5x9, PN at 20 °C max. 15 bar, Length 20 m
Highly flexible hose for compressed air applications in workshop areas. Assembled with brass stem and brass quick disconnect coupling DN 7.2 optional with pushbutton safety coupling DN 7.4 and galvanised steel stem.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Compact cyl.ISO 21287, double-acting, female piston rod, magnet, PistonØ20, Stroke50, M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Nipple for couplings I.D. 7.2 - I.D. 7.8, Steel, for hose 8x6, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Jaw coupling with hose connection, I.D. 10 (3/8"), Malleable cast iron, galv. / yellow passivated, Operating pressure max. 10 bar
Universal standard coupling for compressed air lines on construction sites or in industry; standard type according to DIN 3489, used worldwide in a very wide range of applications.

- Robust couplings made of malleable iron, zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- 100% couple test and secure connection

Pressure gauge- screw connection, G 1/4 i., Pipe exterior Ø 8 mm, PN max. 315 bar, AF1 17, AF2 19, galvanised steel
Pressure gauge fitting, parallel female thread, light type

Sintered bronze silencer »value line« flat, Hexagonal, G 1/4, Operating pressure max. 10 bar, Operating temp. -10 °C to 200 °C
For reducing the exhaust noise generated by pneumatic equipment.

Shrink disc ST-R stainless steel 1.4057 inner diameter 24mm
Material: Stainless steel 1.4057.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk.
Article ID: 61599824

Spur gear made of polyacetal resin die-cast with hub module 0.7 14 teeth tooth width 6mm outside diameter 11.2mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28201400

High performance V-belt XPZ EPDM datum length 1562 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091562

Frequency:50 Hz
Speed:2860 1/min
Shaft Output:1418 W
Volume Flow:1165 m³/h
Pressure:Δp s2729 Pa
Pressure:Δp t2901 Pa
Density:43862 kg/m³
Sound Pressure:84 dB(A

2 Fans, Single Row, 1 Height Unit Weight:2,4

Length : 300 mm
BAR-ES-23-300-25-2M8-NW-B
SKU: SBAQA100040-300
Magnet quality: GSN-52
Interface/connection dim's: Threaded hole M8 (2x)
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

CH120 General features
Wide display with graphic icons combined with frontal keys for choosing the operation mode
Display lock function for cleaning.
Possibility to visualize Celsius or Fahrenheit temperature values.
Battery operation life over 1 year.
Low battery charge indication.
Maximum ambient temperature 45°C.
Protection degree IP40.
Pollution degree 2.
Dimensions 127 x 82 x 24 mm
Electric features
Power supply with two 1,5V AA alkaline long life batteries.
SPDT free voltage contacts;
Type of action: 1BU (micro disconnection)
Auxiliary input: 2 pole terminal block, suitable for ON/OFF free voltage contacts.
Double insulation
Impulse voltage 4000V
Class A Software

Spherical washer DIN 6319 diameter 12mm for bolt diameter 6mm steel hardened
Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. * max. statical load. ** total height, together with conical seat DIN 6319.
Article ID: 65540600

Linear ball bearing KB-3 ISO series 3 with Dichtung for shaft Ø 50mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64615000

Round cylinder, double-acting, with magnet, Piston Ø 40, Stroke 500, G 1/4, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
Version with magnetic piston.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Adjustable T screw fitting, cone seal, 360° swivel range, female nut M30x2.0 i., Pipe ext. Ø 20, PN max. 400 bar, galvanised steel

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 32, Stroke 25, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ16, Stroke70, M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Straight screw-in fitting, M16x1,5 o., Pipe exterior Ø 10 mm, PN max. 630 bar, A/F1 22, A/F2 22, galvanised steel
Male connector, metric thread, heavy type

Jaw coupling with ET, G 3/4, DN 17, Malleable cast iron, galvanised and yellow passivated, Operating pressure max. 10 bar
Universal standard coupling for compressed air lines on construction sites or in industry; standard type according to DIN 3489, used worldwide in a very wide range of applications.

- Robust couplings made of malleable iron, zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- 100% couple test and secure connection

Angled screw-in fitting, R 1/2 o., Pipe exterior Ø 15 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

Closing cap (hexagonal design), G 1/2, AF 23, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C
As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

High performance V-belt XPZ EPDM datum length 1587 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091587

Frequency:50 Hz
Speed:2860 1/min
Shaft Output:1412 W
Volume Flow:1155 m³/h
Pressure:Δp s2744 Pa
Pressure:Δp t2911 Pa
Density:43862 kg/m³
Sound Pressure:84 dB(A)

24V Dc, 19W, Ip67, Glass Tube, Clear, L=836 Mm Weight:2,48

Size : 100 mm
HGR-SQ-100-FL-R-G-S
SKU: TPGC100078
Stock: 30
Max. tear off force: 1500 N
Advised working load: 500 N
With magnetic grippers, you automatically pick up flat steel products or sheets up to 10 mm thick. They are quick and easy to switch, and specially designed for transferring, placing or positioning using a robotic arm.Magnetic grippers serve as end of arm tooling for sheets. They even hold perforated sheets effortlessly.

For sheets up to 10 mm thick
Switching: pneumatic
For robot End-of-arm tooling
Lifting power: up to 45 kg
Permanent magnet

Application

End of arm tooling

Magnetic grippers are ideal when you want to pick up, place or position flat, steel products with a robot. The applications are very diverse, such as:

pick-and-place of steel parts
handling perforated sheets with a robot arm
unstacking workpieces from crates (bin picking)
positioning sheets in presses
stacking or unstacking hot baking tins

The high temperature gripper is suitable for this last example. For example, you can also use it to load and unload high-grade steel in a press; it is formed at high temperatures.


Operation

Switching and control of the magnet gripper

The magnet gripper switches pneumatically. This moves the magnetic field and switches it on and off.
Control can be with a 5/3 or possibly a 5/2 valve.
An activated magnet gripper does not release its load, even if the air pressure or power supply is lost. This makes it a safe and reliable end-of-arm solution.

Practical tips

Things to look out for when using magnetic grippers:
When working with thin sheets (≤1 mm) you must consider the ‘peeling off effect’. This reduces the maximum breakaway force. In this situation, it is better to create a construction with multiple smaller grippers (e.g. 40 x 40 mm) than one or two large grippers.
A sheet can be damaged when the gripper contacts the sheet. If this is a problem, choose the version with a protective polyurethane cap (friction type).
When working with oiled sheets or with high acceleration of the robotic arm, a sheet can shift position. This, too, can be prevented through use of the type with a polyurethane friction pad.
Sometimes the surface of a sheet is not flat, so the vacuum does not work. In this case, magnetic grippers are an ideal solution. The more contact surface area the better, but a magnet gripper always works on ferromagnetic steel. Thus on round shapes too.
The vacuum does not work when there are holes in the sheet; the magnet gripper does. In this case, choose a gripper with larger dimensions than the hole, and test the chosen solution thoroughly.
For small workpieces, Goudsmit has very small grippers in the assortment. They have a low overall height and give extra strength to hold the workpiece in place. For example, choose type HGR-RO-020.
For thin sheets (≤4 mm) and oily sheets that stick together, the robot sometimes picks up several sheets together. Sheet separators prevent this. They are available both in permanent and pneumatically switchable versions.

CH120-230V General features
Wide display with graphic icons combined with frontal keys for choosing the operation mode;
Display lock function for cleaning;
Possibility to visualize Celsius or Fahrenheit temperature values;
Maximum ambient temperature 50°C;
Protection degree IP40;
Pollution degree 2;
Dimensions 127 x 82 x 24 mm.
Electric features
230Vac power supply;
SPDT free voltage contacts;
Type of action: 1BU (micro disconnection);
Double insulation;
Impulse voltage 4000V;
Class A Software.

Spherical washer DIN 6319 diameter 17mm for bolt diameter 8mm steel hardened
Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. * max. statical load. ** total height, together with conical seat DIN 6319.
Article ID: 65540800

Internal gear made of steel C45 module 1.5 48 teeth tooth width 15mm outside diameter 100mm
Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.

Article ID: 22844800

Storz adapter, Stainless steel V4A, Storz size 52-C, Tappet distance 66 mm, G 1 1/2 IT, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Cross-piece, 4 x interior, G 1/2, AF 21, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass

Kamlok quick-connect plug, Hose sleeve, E type, Stainless steel 1.4401, for hose I.D. 75, Plug Ø 92 mm, Pressure max. 16 bar
High-quality, robust, universal coupling system with a safety clamp for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok stainless steel couplings are designed for use with corrosive media in the chemical and petrochemical industries, steelmaking, shipbuilding, agriculture, etc.

All female threaded couplings and connectors are with female thread sealing ring made of PTFE.

Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ20, Stroke50, M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Straight screw-in fitting, G 1/4 o., Pipe exterior Ø 12 mm, PN bar 315, A/F1 22, A/F2 19, galvanised steel
Male connector, parallel male thread, light type

Male branch elbow »universal short«, long, rot. 1/8, hose-Ø 6, taper seat, Working pressure -0,99 to 20 bar, nickel-plated brass
The quick-connect fittings of the »universal short« series are true to their name and are used for the quick and simple connection of hoses. The conical sealing threads off a high degree of flexibility, as it is compatible with both conical and cylindrical threads. Thus the quick-connect fitting can be combined with a wide variety of thread types (BSPP, BSPT, NPT, NPTF, PT, PF) of standards ISO 7.1 and ISO 228. Shorter assembly ties result from the reduced thread length. The smaller hole spacing, resulting from the reduction of the width across flats, enables installation in very tight spaces. This saves time and space.

The complete sealing is also guaranteed on uneven, for example inclined, concave or convex surfaces, and with differing radii and chamfers. The special geometry of the seal enables vacuum applications.

Suitable plastic pipes: PA11, PA12, polyethylene, polyurethane (for polyurethane a hardness of 98 shore is recommended), PTFE.

Areas of application: Pneumatic automation, automotive industry, textile and packaging industry, compressed air circuits, vacuum applications.

Kamlok quick-connect socket with exterior thread, B type, Aluminium, R 1 1/4, for plug Ø 45 mm, Pressure max. 16 bar, max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Extension piece short »value line«, G 1/4 o., G 1/4 i., AF 17, Operating pressure max. 60 bar, Operating temperature max. 150 °C
For air, water, steam, oil, etc.

Locking assembly COM-A stainless steel 1.4401 bore 20mm size 20-47
Material: Stainless steel 1.4401 (SS316).

Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps. Demounting: Due to the cone angle,
the clamping set is usually released once all screws have been fully
unfastened. There a three large threads cut into the front ring, which
serve to remove this ring.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61599520

High performance V-belt XPZ EPDM datum length 1600 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091600

Frequency:50 Hz
Speed:2865 1/min
Shaft Output:1529 W
Volume Flow:1095 m³/h
Pressure:Δp s3288 Pa
Pressure:Δp t3357 Pa
Density:43862 kg/m³
Sound Pressure:91 dB(A)

24V Dc, 19W, Ip67, Glass Tube, Clear, L=836 Mm Weight:2,58

Z52 – Z53 – Z53PT General features
2/3 way / by-pass.
Nominal pressure 16 bar.
Differential pressure 16 bar.
Maximum pressure +100°C.

Conical seat DIN 6319 diameter 12mm for bolt diameter 6mm steel hardened
Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. * max. statical load. ** total height, together with spherical washer DIN 6319.
Article ID: 65550600

Flexible coupling EL nominal torque 10Nm double-length version with pilot bore overall length 70mm outer diameter 30mm
Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge.
Article ID: 60201500

Cross-piece, 3 x interior, 1x exterior, G/R 1/2, Operating pressure max. 60 bar, Operating temp. max. 150 °C, nickel-plated brass

GEKA spray nozzle with coupling connector, bright brass, DN 25, Operating pressure max. 40 bar, Med./ambient temp. -10 °C to 90 °C
Claw couplings (claw distance: 40 mm) made of brass for water, industrial, mortar, suction and discharge hoses. Suitable for a wide range of applications, e.g. industrial plant engineering, civil and structural engineering, environmental engineering, manual trades, domestic water engineering, horticulture and landscaping, agriculture and forestry, etc.
Available in a rigid or 360° swivelling version. The two systems can also be easily coupled to one another!

GEKA threaded piece, rigid, Stainless steel, G 1 interior, Operating pressure max. 40 bar, Medium / ambient temp. -10 °C to 150 °C
Claw couplings (claw distance: 40 mm) made of stainless steel (similar to 1.4581).
Suitable for a wide range of applications, e.g. in the chemical, food processing, water management,
vehicle construction, shipbuilding and aerospace industries, agriculture, environmental engineering, etc.
The stainless steel series can be easily coupled to the standard brass series!

Straight screw-in fitting, NPT 1/4 o., Pipe exterior Ø 12 mm, PN max. 315 bar, A/F1 22, A/F2 19, galvanised steel, NPT threat
Male connector, male thread NPT, light type

Bulkhead fitting, Exterior thread G 3/4, Interior thread G 1/2, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Reducer, Pipe exterior Ø Female connector 22/15 mm, PN max. 160 bar, a/f1 24, a/f2 27, a/f3 36, galvanised steel
Reducer, light type

Knurled nut, M18x1.5, for hose 9/12 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PP
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.