You focus to run your business, we care the rest what you need

Public Pricelist

test

Sort by

New Arrivals
Price
Price
Name
Name

All Brands
Radio Energie
Comar
Autobahnhof
Escha
Genebre
Goudsmit Magnetics
Fantini Cosmi
Karl Klein
Meisei Hotweezers
Bene Inox
Haag + Zeissler
Beta Sensorik
Bailey Mackey
Stoerk Tronic
Captron
Riegler
Maedler
Elmeko
Airmar

All Products
Sensors
- Inductive Sensors
- Miniature Opto Sensors
- Universal Opto Sensors
- Diffuse Sensors
- Digital Pressure Sensors
Hoses
Thermostat
- Thermostat Controller
Industrial Magnetic Systems
- Magnets & Assemblies
- Accessories
- Demagnetization
- Magnetic Filtering
- Magnetic Handling
- Promotional & Office Magnets
- Recycling & Sorting
Bearings
- Flange Bearings
- Linear Bearings
Industrial Chains
- Roller Chains And Accessories
Precision Couplings & Friction Clutches
- Couplings, Friction Clutches, Safety Couplings
Industrial Gears & Worms
- Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels
Machine Mounts, Rubber-Buffers, Dampers
- Rubber-Metal Buffers
Joints
- Rotary Joints
- Swivel Joints
Industrial Products
- Connectors
- Gauges
- Level Controls
- Fans
- Fastening Elements
- Power supply & Reflectors
- Stainless Steel Products
- Straight Tooth System
- Switches
- Taper Bushes
- Thermoregulation And Gas Safety
- Timing Belts And Pulleys
- Trapezoidal Thread Spindles, Nuts And Ball Screw Drives
- V-Belts, Pulleys, Accessories, 3 Grooves
- Heat Metering Systems
- Ventilation And Air Conditioning
Cable
- Cable Sockets
Valve
Contactless transformers
Light Guide
- Safety Light Curtains
- Measuring Light Grids
- Safeasy + Slim Light Curtains
Vibration Monitoring
Smart Home
Sprockets
Motor Film Capacitors
Gps/Heading
Legacy Products
Software/App
Transducers
- Air Ranging
- Marine
- Nmea
- Survey/Scientific

65365381

Lockwasher DIN 5406 MB7 zinc plated inner diameter 35mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65365381

$ 4.92 4.92 USD

Add to Cart More Details

Maedler 65365381

Get Quote

61599424

Locking assembly BAR stainless steel 1.4401 bore 24mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.

$ 157.54 157.54 USD

Add to Cart More Details

Maedler 61599424

Get Quote

15091412

High performance V-belt XPZ EPDM datum length 1412 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091412

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091412

Get Quote

15091187

High performance V-belt XPZ EPDM datum length 1187 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091187

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091187

Get Quote

DMVL 345-1-18

Frequency:50 Hz
Speed:2810 1/min
Shaft Output:280 W
Volume Flow:463 m³/h
Pressure:Δp s1610 Pa
Pressure:Δp t1708 Pa
Density:43862 kg/m³
Sound Pressure:76 dB(A

$ 0.00 0.0 USD

Add to Cart More Details

Karl Klein DMVL 345-1-18

Get Quote

40 P03 57H

Pk 30 Hk, 30W, 24V Dc Weight:1,96

$ 736.03 736.03 USD

Add to Cart More Details

Elmeko 40 P03 57H

Get Quote

HRA-F-102x44-AB-0500-R-B

Ferrite - reinforced Weakening outfeed
HRA-F-102x44-AB-0500-R-B
SKU: TBAB050014
Stock *: 0
Width: 102 mm
Height: 44 mm
Length: 500 mm
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.

Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning

Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller

Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

$ 522.72 522.72 USD

Add to Cart More Details

Goudsmit Magnetics HRA-F-102x44-AB-0500-R-B

Get Quote

MKA 450-90 / 8175620

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 90 Dimension D x H (mm) 60 x 120

$ 11.68 11.68 USD

Add to Cart More Details

Comar MKA 450-90 / 8175620

Get Quote

L02CI2B

L02A.. – L02C.. – L02D.. General features
Code LT312U: power supply transformer 230/12V 50/60Hz 3VA;
Code LS130: NTC10k probe;
Code LS120: PTC1000 probe;
Code LS140: PT100 probe;
Code LS150: thermocouple J probe.
Electric features
Power supply: 12Vac/dc ± 10%, 2W (L02AI-/L02CI-/L02DI-)
Power supply: 110 – 230Va c±10%, 50/60Hz, 3W (L02AM-/L02CM-/L02DM-)

$ 74.90 74.9 USD

Add to Cart More Details

Fantini Cosmi L02CI2B

Get Quote

17713200

Neoprene timing belt HTD 14M width 40mm Lw 2590mm 185 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17713200

$ 254.68 254.68 USD

Add to Cart More Details

Maedler 17713200

Get Quote

16881400

Polyurethane timing belt AT10 width 32mm Lw 980mm 98 teeth 32 AT10/980
Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths.
Article ID: 16881400

$ 116.81 116.81 USD

Add to Cart More Details

Maedler 16881400

Get Quote

GACL 12 A

Service unit 2-part »GA«, PC container, Protective cage, 5 µm, Size 300, G3/8, Input pressure max. 10 bar, Control range 1.5-9 bar
Two-piece service units consisting of a diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.

$ 517.36 517.36 USD

Add to Cart More Details

Riegler GACL 12 A

Get Quote

253.66-ES

Cross-distributor, 4 x interior, Rp 1, Operating pressure max. 20 bar, Operating temp. max. 175 °C, Stainless steel 1.4408

$ 180.60 180.6 USD

Add to Cart More Details

Riegler 253.66-ES

Get Quote

15.DMA.63050

Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ63, Stroke50, G1/8, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

$ 301.78 301.78 USD

Add to Cart More Details

Riegler 15.DMA.63050

Get Quote

61.018-4 ES

L-ring piece, G 1/8, for hose exterior Ø 4 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.

$ 249.42 249.42 USD

Add to Cart More Details

Riegler 61.018-4 ES

Get Quote

212.005-4

Y- angled piece fitting »Blue Series«, rotating, M5 i./o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

$ 146.75 146.75 USD

Add to Cart More Details

Riegler 212.005-4

Get Quote

14.800-8-E

T-connection »value line«, for hose 8/6 mm, AF 10, Operating pressure max. 18 bar, nickel-plated brass
Union tees
Nickel-plated brass, »value line« Series

$ 135.26 135.26 USD

Add to Cart More Details

Riegler 14.800-8-E

Get Quote

TFR241-212112

Reducing piece 241, ET/IT, R 2 1/2 o., Rp 1 1/2 i., Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

$ 164.75 164.75 USD

Add to Cart More Details

Riegler TFR241-212112

Get Quote

MS290SK18

Locking screw, Exterior hexagonal, G 1/8, AF 14, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

$ 125.39 125.39 USD

Add to Cart More Details

Riegler MS290SK18

Get Quote

65365881

Lockwasher DIN 5406 MB8 zinc plated inner diameter 40mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65365881

$ 4.92 4.92 USD

Add to Cart More Details

Maedler 65365881

Get Quote

15091420

High performance V-belt XPZ EPDM datum length 1420 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091420

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091420

Get Quote

15091202

High performance V-belt XPZ EPDM datum length 1202 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091202

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091202

Get Quote

DMVL 345-1-18 Ex

Frequency:50 Hz
Speed:2820 1/min
Shaft Output:281 W
Volume Flow:457 m³/h
Pressure:Δp s1637 Pa
Pressure:Δp t1732 Pa
Density:43862 kg/m³
Sound Pressure:76 dB(A)

$ 0.00 0.0 USD

Add to Cart More Details

Karl Klein DMVL 345-1-18 Ex

Get Quote

14 400 751

Colour: Ral 7035 Light Grey Weight:2

$ 351.66 351.66 USD

Add to Cart More Details

Elmeko 14 400 751

Get Quote

HRA-F-102x44-AC-0500-R-B

Ferrite - reinforced Weakening infeed
HRA-F-102x44-AC-0500-R-B
SKU: TBAC050014
Stock *: 0
Width: 102 mm
Height: 44 mm
Length: 500 mm
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.

Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning

Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller

Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

$ 522.72 522.72 USD

Add to Cart More Details

Goudsmit Magnetics HRA-F-102x44-AC-0500-R-B

Get Quote

MKA 450-100 / 8175732

$ 12.76 12.76 USD

Add to Cart More Details

Comar MKA 450-100 / 8175732

Get Quote

CH173D

CH173D General features
Storage and transport ambient temperature: -25 ÷ 60°C.
Receiver: OOK 868,350 MHz.
Sensibility: -104 dBm.
Pollution degree 2.
Software class A.
Double insulation.
Type of action: 1B (micro disconnection)
Pulse voltage 4000V.
Electric features
Power supply: 230V 50 Hz.
Absorbed power: 2VA.
Contacts rating: 5(3)A 250Vac.
Voltage-free switching contacts.
Type of action: 1B (micro disconnection)
Pulse voltage: 4000V.

$ 75.26 75.26 USD

Add to Cart More Details

Fantini Cosmi CH173D

Get Quote

28102401

Spur gear made of polyketone die-cast with hub module 0.5 24 teeth tooth width 3mm outside diameter 13mm
Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load.
Article ID: 28102401

$ 4.92 4.92 USD

Add to Cart More Details

Maedler 28102401

Get Quote

17713600

Neoprene timing belt HTD 14M width 40mm Lw 2800mm 200 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17713600

$ 269.60 269.6 USD

Add to Cart More Details

Maedler 17713600

Get Quote

16881500

Polyurethane timing belt AT10 width 32mm Lw 1010mm 101 teeth 32 AT10/1010
Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths.
Article ID: 16881500

$ 120.58 120.58 USD

Add to Cart More Details

Maedler 16881500

Get Quote

GCL 32

Service unit 2-part »G«, PC container, Protective cage, 5 µm, Size 400, G 3/8, Input pressure max. 10 bar, Control range 1.5-9 bar
Two-piece service units consisting of a diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.

$ 517.36 517.36 USD

Add to Cart More Details

Riegler GCL 32

Get Quote

2401.6652

Storz coupling, Hose supports, rotating, Aluminium, Storz size 52-C, I.D. 52, Operating pressure max. 16 bar, Temp. -40°C to 110°C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

$ 180.60 180.6 USD

Add to Cart More Details

Riegler 2401.6652

Get Quote

SP 8-250DSD

Spiral hose coupling set, Safety coupling I.D. 7.4, Nylon 11 PA, Hose ø 7.9x6.3, PN at 23 °C max. 13 bar, Length 2.5 m
These hoses allow gaseous and liquid media to flow safely and efficiently (Air, gases, oils, greases, fuels, organic and inorganic substances).

Thanks to their small coil diameter, they are compact, easy to handle and lightweight.
Very good recoil force owing to the use of nylon 11 (PA).

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

$ 301.98 301.98 USD

Add to Cart More Details

Riegler SP 8-250DSD

Get Quote

2223.14

Hose rupture valve »Hose Guard« Aluminium, Polyacetate piston, Temp. -20 °C to 80 °C, G 1/4 IT/IT, Input pressure max. 18 bar
Efficient protection for ruptured hoses or pipes in pneumatic systems. Preset to permit normal air consumption by pneumatic tools.
Hose Guard detects a rupture in a hose or pipe and interrupts the supply of compressed air in a fraction of a second apart from a minimal residual flow. Unaffected parts of the compressed air system remain fully pressurised, so that the damaged hose or segment can be replaced without difficulty. Once the ruptured hose or pipe has been repaired, the replaced segment gradually fills to its working pressure level. As soon as this occurs, Hose Guard opens the line again for normal operation.

Installation: Upstream of a coupling (connector between hard piping and junction box/coupling) and downstream of a service unit.

»Hose Guard«
- Protects personnel, machinery and plant against damage if a pneumatic system or hose ruptures
- Complies with the EU standard DIN EN ISO 4414: 2010, 2011-04 - § 5.4.5.11
- Is reliable and tamper-proof
- Can be installed in any pneumatic system

$ 249.42 249.42 USD

Add to Cart More Details

Riegler 2223.14

Get Quote

75/1

Mounting bracket with nut and washer, for pressure regulator »Standard«

$ 146.75 146.75 USD

Add to Cart More Details

Riegler 75/1

Get Quote

SFR 23-112120

Pipe double nipple 23, ET/ET, galvanised steel ST 37-2, R 1 1/2, Length 120 mm, Working pressure max. 50 bar
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

$ 135.26 135.26 USD

Add to Cart More Details

Riegler SFR 23-112120

Get Quote

371.07

Mini ball valve, Rotating handle, nickel-plated brass, Medium/ambient temp. -10 °C to 80 °C, R/Rp 3/8 ET/IT, DN 8, PN max. 10 bar

$ 164.80 164.8 USD

Add to Cart More Details

Riegler 371.07

Get Quote

32344

Angled screw-in supports, R 1/4 o., for hose I.D. 10 mm, AF 14, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

$ 125.44 125.44 USD

Add to Cart More Details

Riegler 32344

Get Quote

15091437

High performance V-belt XPZ EPDM datum length 1437 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091437

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091437

Get Quote

15091212

High performance V-belt XPZ EPDM datum length 1212 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091212

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091212

Get Quote

DMVL 355-1-25

Frequency:50 Hz
Speed:2800 1/min
Shaft Output:406 W
Volume Flow:628 m³/h
Pressure:Δp s1742 Pa
Pressure:Δp t1842 Pa
Density:43862 kg/m³
Sound Pressure:80 dB(A)

$ 0.00 0.0 USD

Add to Cart More Details

Karl Klein DMVL 355-1-25

Get Quote

40 PE3 57LP

Pse 30 Lp, 24V Dc Weight:2,04

$ 886.93 886.93 USD

Add to Cart More Details

Elmeko 40 PE3 57LP

Get Quote

HRA-F-102x44-AA-0750-R-B

Ferrite - reinforced 750 mm
HRA-F-102x44-AA-0750-R-B
SKU: TBAA075014
Stock *: 0
Width: 102 mm
Height: 44 mm
Water-resistant: no
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.

Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning

Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller

Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

$ 531.36 531.36 USD

Add to Cart More Details

Goudsmit Magnetics HRA-F-102x44-AA-0750-R-B

Get Quote

O81RF

O81RF General features
O81RF wireless radiator thermostat is equipped with:
Electric features
Back lit LCD display for easy temperature reading, set point and mode function reading
Battery life: approx. 2 years (with 2 comfort cycles / day)
Protection degree: IP20
Connection: standard M30x1,5.
Accessories included: adaptors for Danfoss valves RA/RAV/RAVL
LCD dimensions 40 x 28 mm
Thermostat dimensions and weight: 90 x 64 x 70 mm. – 170 g.

$ 75.53 75.53 USD

Add to Cart More Details

Fantini Cosmi O81RF

Get Quote

62410606

Flanged bush slotted version 6 x 8,0 / 12 x 7 mm
Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer.

Article ID: 62410606

$ 4.92 4.92 USD

Add to Cart More Details

Maedler 62410606

Get Quote

17713900

Neoprene timing belt HTD 14M width 40mm Lw 3150mm 225 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17713900

$ 286.85 286.85 USD

Add to Cart More Details

Maedler 17713900

Get Quote

16881600

Polyurethane timing belt AT10 width 32mm Lw 1050mm 105 teeth 32 AT10/1050
Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths.
Article ID: 16881600

$ 122.48 122.48 USD

Add to Cart More Details

Maedler 16881600

Get Quote

34014

Handheld tyre gauge, quick connector, Pressure gauge Ø 80 mm, uncalibrated, 0-12 bar/170 psi, with plug-in nipple I.D. 7.2
These pressure gauges are effectively protected against shock and impact by means of a free-standing plastic cap. They can be loaded against gauge pressure and up to the maximum scale value.
With push-in plug for DN 7.2 coupling.

$ 517.42 517.42 USD

Add to Cart More Details

Riegler 34014

Get Quote

9227.34

Check valve, Full passage, Brass, Operating temperature -20 °C to 100 °C, G 1, PN max. 25 bar, Opening pressure 0.01 - 0.03 bar

$ 180.60 180.6 USD

Add to Cart More Details

Riegler 9227.34

Get Quote

350506

Safety ball valve not lockable with venting hole, nickel-plated brass, Operating temp. max. 60°C, Rp 1 1/4, DN 32, PN max. 12 bar
Brass safety ball valves.
Specially designed for pneumatic applications.
The ball valve shuts off the supply side and relieves the application into the atmosphere.

$ 302.04 302.04 USD

Add to Cart More Details

Riegler 350506

Get Quote

EWVM1810SST

Adjustable union elbow, with cone seal, 360° swivel range, female nut M18x1.5 i., Pipe ext.Ø 10, PN max. 630 bar, galvanised steel

$ 249.55 249.55 USD

Add to Cart More Details

Riegler EWVM1810SST

Get Quote

766.014-8

T-ring piece, for hollow screw G 1/4, for hose exterior Ø 8 mm, Working pressure max. 16 bar, Operating temp. -20 °C to 70 °C
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

$ 146.75 146.75 USD

Add to Cart More Details

Riegler 766.014-8

Get Quote

72.018-6

Angled screw-in fitting POM, G 1/8 o., for hose exterior Ø 6 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

$ 135.31 135.31 USD

Add to Cart More Details

Riegler 72.018-6

Get Quote

377.03

Mini safety ball valve, not lockable, Venting hole 3.5, Operating temperature -20°C to 80°C, G 3/8 IT, DN 8, PN 0.99 - 20 bar

$ 164.80 164.8 USD

Add to Cart More Details

Riegler 377.03

Get Quote

32352

Angled screw-in supports, R 3/8 o., for hose I.D. 8 mm, AF 10, Over-pressure max. 17 bar, Temperature range -40 °C to 90 °C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

$ 125.44 125.44 USD

Add to Cart More Details

Riegler 32352

Get Quote

15091450

High performance V-belt XPZ EPDM datum length 1450 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPZ are a good substitute for SPZ and 10.
Width b = 9.7 mm.

Height h = 8 mm.

Smallest medium pulley diametre = 56 mm.

Weight per Metre 0.065 kg.

Article ID: 15091450

$ 1.20 1.2 USD

Add to Cart More Details

Maedler 15091450

Get Quote

DMVL 355-1-25 Ex

Frequency:50 Hz
Speed:2820 1/min
Shaft Output:408 W
Volume Flow:616 m³/h
Pressure:Δp s1787 Pa
Pressure:Δp t1883 Pa
Density:43862 kg/m³
Sound Pressure:80 dB(A)

$ 0.00 0.0 USD

Add to Cart More Details

Karl Klein DMVL 355-1-25 Ex

Get Quote

71 ST3 850

Dın A3 Across, Sheet Steel, Ral 7035 Weight:2,12

$ 234.67 234.67 USD

Add to Cart More Details

Elmeko 71 ST3 850

Get Quote

HRA-F-102x44-AA-0300-R-W

Ferrite - reinforced 300 mm
HRA-F-102x44-AA-0300-R-W
SKU: TBAA030054
Stock *: 0
Width: 102 mm
Height: 44 mm
Water-resistant: yes
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.

Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning

Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller

Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

$ 531.36 531.36 USD

Add to Cart More Details

Goudsmit Magnetics HRA-F-102x44-AA-0300-R-W

Get Quote

C68

Intellitherm C68 General features
Front cover for batteries extraction.
Display flashing in case of low batteries charge.
Maintenance of all data during batteries replacement.
Microprocessor and CMOS circuits.
Double insulation.
Protection degree IP20.
Unit weight 0,22 Kg.
Electric features
Contacts rating: 5(3)A 250Vac.
Type of action: 1BU (micro disconnection)
Voltage-free switching contact.
Power supply with two 1,5 V AA alkaline long life batteries without connection to the electric circuit.

$ 75.53 75.53 USD

Add to Cart More Details

Fantini Cosmi C68

Get Quote