Compact cyl.ISO 21287, single-acting, male piston rod ext.,magnet,PistonØ25,Stroke10,M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Straight screw-in fitting, G 3/8 o., Pipe exterior Ø 14 mm, PN max. 630 bar, A/F1 27, A/F2 24, galvanised steel, soft seal
Male connector, parallel male thread and soft seal, heavy type

Push-in L-fitting »Blue Series« long, rotating, G 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0 - 10 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Single ring supports, for G 1/4, for hose 8/6 mm, Operating pressure 0 - 10 bar, Temperature -10 °C to 60 °C, POM

Feather key DIN 6885 version A 4 x 4 x 16 mm material stainless steel 1.4571
Material: Stainless steel 1.4571.

Version A.

Article ID: 61899067

Product inlet/outlet size : Ø500 / #500 mm
SPA-6-B-FI-OS-ST-Ex-D-B
SKU: SPAE000066
Stock *: 0
Max. capacity: 350 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Slide set DS 0305 slide length 305mm stainless steel 1.4301
Material: Stainless steel 1.4301. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings.

Article ID: 64922412

Spiral hose 6,5x10 length 0,8 - 8 mtr
Material: Polyurethane, flexible and extremely rugged. Fitting made from nickel-plated brass. The hose retracts to its original shape: the coils will not loose their original shape even under most adverse operating conditions. Data of fixed fitting on the supply side: PTFE pre-coated thread PVC coating to protect hose Data of the swivel connection on the side of the compressed-air tool: Swivelling joint with ball bearing Easy swivelling, even under pressure, no overstressing of hose coil. Max. temperature: 70ºC. Operating pressure at 20°C: Ø 5 x 8 : 9 bar Ø 6.5 x 10 : 9 bar Ø 8 x 12 : 8 bar
Article ID: 87010608

Filling unit »FUTURA«, electr. actuated with solenoid 24 V DC, 2.5 watt, Size 2, G 1/2, Exhaust G 1/2, Input pressure 2.5 - 10 bar
The filling unit protects devices connected downstream by ensuring a gradual build-up of pressure.
The unit consists of a 3/2-way valve including silencer and a filling valve (start-up valve).
It is connected and disconnected by means of the 3/2-way valve.
The filling time can be altered by turning the adjusting screw.

Straight screw-in fitting, G 1/4 o., for hose 9/12 mm, AF 22, Working pressure max. 10 bar (20 °C)/max. 2.5 bar (90 °C), PP
Chemically resistant to almost all inorganic acids and bases, even in high concentrations and at temperatures greater than 90 °C.

Soft PVC workshop hose set, Quick-connect coupling I.D. 7.2, Hose Ø 11x6.3, PN at 20 °C max. 15 bar, Length 25 m
Highly flexible hose for compressed air applications in workshop areas. Assembled with brass stem and brass quick disconnect coupling DN 7.2 optional with pushbutton safety coupling DN 7.4 and galvanised steel stem.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Screw-in hose connector, G 1 1/2 o., for hose I.D. 38 mm, AF 55, brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Straight screw-on fitting G 1/2 i., for hose 6/8 mm, AF 27, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Nipple for couplings I.D. 2.7, nickel-plated brass, for hose 5x3, AF 7, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0 - 1 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Sintered bronze silencer »value line«, Hexagonal, G 1/8, Operating pressure max. 10 bar, Operating temperature -10 °C to 200 °C
For reducing the exhaust noise generated by pneumatic equipment.

Feather key DIN 6885 version A 10 x 8 x 40 mm material C45
Material: C45K.Version A.
Article ID: 61817500

Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 2000mm
Material: Stainless steel 1.4305. Milled teeth. Precisely
Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25
modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm
= Module 3.18. The teeth on the gear racks are manufactured using an
overhead milling cutter. This leads to negative tolerances for dimension
a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2,
except for nominal length 500 mm, cut for continuous linking. * Length =
Nominal length. The real length is roughly one multiple of the pitch.

Article ID: 20599609

Product inlet/outlet size : Ø600 / #550 mm
SPA-7-B-FI-OS-ST-NA-D-B
SKU: SPEE000067
Stock *: 0
Max. capacity: 500 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Slide set DZ 0305 slide length 305mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings.

Article ID: 64902412

Ball head precision levelling adjuster with locknut MN 686.7 40-26.0
Material: 42CrMo4V, Nr. 1.7225, zinc plated and blue passivated. For non-parall surfaces up to 4° slope. Lower overall height with short adjustment travel. With lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (steel bolt strength class 8.8, stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68675000

Service unit 2-part »variobloc« with PC container, Size 2, G 1/2, Input pressure max. 16 bar, Medium / ambient temp. max. 50 °C
Two-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Pipe double nipple, R 1 1/2, Length 60 mm, Working pressure max. 40 bar, Stainless steel 1.4571

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 40, Stroke 40, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

T-connection, for hose 6/4 mm, AF1 12, AF2 10, Pressure range max. 25 bar, Temperature -40 °C to 200 °C, Stainless steel 1.4404
Supplied without seals. For use with corrosive media and at high temperatures.

Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential.
The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.

Angled piece, exterior / exterior, R 1/2, AF 21, Operating pressure max. 60 bar, Operating temperature max. 150 °C, Bright brass

Fork head, »Y« type for cylinder series »MI« and »MSI«, for piston Ø 8-10, Piston rod thread M4x0.7
Fork model, »Y« type

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range -1 / 0 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight screw-in supports, R 1/2 o., for hose I.D. 16 mm, AF 10, Over-pressure max. 22 bar, Temperature range -40°C to 90°C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 3mm outer diameter 6mm length 6mm
Self lubricating, oil coated, pressed ready-to-install and 1)
kalibrated. After press-fitting them into a rigid bearing housing with a
mounting hole H7, these bearings have a bore of H7. Edges chamfered at
45°, at choice of the manufacturer. The concentricity tolerance refers
to d2. 1) no statement regarding the surface roughness according to DIN
3141 (prenorm) can be given due to the porous structure of the sintered
metal. Technical Data: Surface pressure: max. 35 N/mm², depending
on speed and diameter. Temperature range: -20°C to +120°C.Tolerances:
Inner diameter F7 / G7. Outer diameter s7. Length +/-0.1mm.

Article ID: 62330300

Loctite 270, High Strength Thread Locking, Content 10 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads =================================================
Specifications
Thread size: To M20.

Strength: High.

Functional strength (Typical value at 22°C): 3 hours.

Breakaway torque tested according to ISO 10964: 33 Nm.

Long-term temperature resistance: -55°C to +180°C.
Approvals
P1 NSF Reg. No.: 123006.

High-strength threadlocker for maximum efficacy in securing and sealing of
bolts, nuts and studs to prevent loosening due to vibration. The product
serves to permanently lock assemblies which must not come loose. It works
on all metals, including passive substrates such as stainless steel,
aluminium and plated surfaces. It is proven to be tolerant of minor
contamination due to industrial oils, e.g. engine oils, corrosion
prevention oils and cutting fluids. Can be disassembled by heating to
300°C. All threaded connections which require high durability against
strong vibrations and shocks or extreme environmental or chemical
influences.



Article ID: 14073109

Magnet dimensions : 230x204x55 mm
SCH-M-N-204x55-0250-B-B-B
SKU: E0015853
Stock *: 0
Width: 388 mm
Height: 520 mm
Weight: 36 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Precision levelling adjuster with locknut MN 686.2 40-26.0 stainless steel
Material: X10CrNiS18.9, Nr. 1.4305. For parall surfaces. Larger overall height with more adjustment travel. With lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68699250

Service unit 2-part »variobloc« with PC container, Size 2, G 3/4, Input pressure max. 16 bar, Medium / ambient temp. max. 50 °C
Two-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Pipe double nipple, R 1/2, Length 180 mm, Working pressure max. 40 bar, Stainless steel 1.4571

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 40, Stroke 40, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way blocking valve »G«, Mounting bracket, Padlock and silencer, Manually actuated, Size 300, G 1/2, Input pressure 0 - 9 bar
Rotary switch can be turned 90°, lockable.
The valve is used to switch off the air supply and is normally installed upstream of a pressure regulator, filter regulator or service unit.
When the valve is closed, the residual air on the P2 side is discharged into the atmosphere through the relief port on the bottom.

Push-in L-fitting »Blue Series«, rotating, Rc/R 3/8 i./o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series« mini, rotating, G 1/8, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Closing cap (hexagonal design), G 1 1/2, AF 53, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Straight hose connection supports, for hose I.D. 19 mm, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Retaining ring DIN 472 40mm
Material: Feather steel, phosphated, oiled. Internal rings for
axial fixing a machine part inside a bore.

Article ID: 61764000

Loctite 270, High Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads =================================================
Specifications
Thread size: To M20.

Strength: High.

Functional strength (Typical value at 22°C): 3 hours.

Breakaway torque tested according to ISO 10964: 33 Nm.

Long-term temperature resistance: -55°C to +180°C.
Approvals
P1 NSF Reg. No.: 123006.

High-strength threadlocker for maximum efficacy in securing and sealing of
bolts, nuts and studs to prevent loosening due to vibration. The product
serves to permanently lock assemblies which must not come loose. It works
on all metals, including passive substrates such as stainless steel,
aluminium and plated surfaces. It is proven to be tolerant of minor
contamination due to industrial oils, e.g. engine oils, corrosion
prevention oils and cutting fluids. Can be disassembled by heating to
300°C. All threaded connections which require high durability against
strong vibrations and shocks or extreme environmental or chemical
influences.



Article ID: 14073110

Magnet dimensions : 280x204x55 mm
SCH-M-N-204x55-0300-B-B-B
SKU: E0013100
Stock *: 0
Width: 438 mm
Height: 520 mm
Weight: 41 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x G + C. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges.
Article ID: 61202000

Compact cyl.ISO 21287, double-acting, female piston rod,magnet,PistonØ125, Stroke50,G1/4, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Adjustable L-fitting, Sealing cone, 360° rotating, Nut M22x1.5 i., Pipe exterior Ø 15 mm, PN max. 315 bar, galvanised steel

Standard cylinder, ISO 15552, double-acting, Piston Ø 32, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches can be mounted in two T-slots on the same side as the compressed air supply.
The version with a 125 mm bore is provided with fixing accessories on three sides as standard.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way blocking valve »G«, Mounting bracket, Padlock and silencer, Manually actuated, Size 300, G 3/8, Input pressure 0 - 9 bar
Rotary switch can be turned 90°, lockable.
The valve is used to switch off the air supply and is normally installed upstream of a pressure regulator, filter regulator or service unit.
When the valve is closed, the residual air on the P2 side is discharged into the atmosphere through the relief port on the bottom.

Y-connection POM, for hose exterior Ø 10 mm, Working pressure max. 10 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Straight screw-in fitting, M16x1,5 o., Pipe exterior Ø 10 mm, PN max. 630 bar, A/F1 22, A/F2 22, galvanised steel, soft seal
Male connector, metric thread and soft seal, heavy type

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0 - 2.5 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Screw-in hose connector, O-ring »value line«, G 3/8, for hose I.D. 9, Operating pressure max. 60 bar, Operating temp. max. 80 °C
For air, water, steam, oil, etc.

Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 1000mm
Material: Stainless steel 1.4305. Milled teeth. Precisely
Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25
modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm
= Module 3.18. The teeth on the gear racks are manufactured using an
overhead milling cutter. This leads to negative tolerances for dimension
a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2,
except for nominal length 500 mm, cut for continuous linking. * Length =
Nominal length. The real length is roughly one multiple of the pitch.

Article ID: 21099605

Loctite 2400, Middle Strength Thread Locking, Content 5 ml ================================================= Actual safety data sheet from 01.06.2015 on the internet in the section Downloads =================================================
Specifications
“White” material safety data sheet without hazard symbols.

Thread size: to M36.

Strength: Medium.

High chemical resistance.

Functional strength (Typical value at 22°C): 2 hours.

Breakaway torque tested according to ISO 10964: 20 Nm.

Long-term temperature resistance: -55°C to +150°C.
Approvals
WRAS (BS 6920): 1104507.

Medium threadlocker formulated to secure and seal bolts, nuts and studs
to prevent loosening due to vibration. It works on all metals and
passive substrates. Slight contamination by industrial oils, corrosion
prevention oils and cutting fluids is tolerated. Its key differentiator
is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no
hazard symbols, risk or safety phrases and does not contain any
declarable carcinogens, mutagens or reproductive toxins. ApplicationsAll threaded connections which require
high durability against strong vibrations and shocks.

Article ID: 14073114

Locking assembly COM-B stainless steel 1.4401 bore 50mm size 50-65
Material: Stainless steel 1.4401 (SS316).

Self-centering clamping bush for small hub diametres. For low torques.
Self-locking. No axial movement during mounting.
Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping
set before mounting, do not use molibdenum disulphide or grease. Tighten
the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange, until the flange is
released.

Article ID: 61599650

Magnet dimensions : 330x204x55 mm
SCH-M-N-204x55-0350-B-B-B
SKU: E0015814
Stock *: 0
Width: 490 mm
Height: 520 mm
Weight: 45 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Flanged bush BBP bore 12mm polyamide 6.6 outer diameter 14mm length 10mm flange diameter 20mm
Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7
Article ID: 62381500

Spur gear made of plastic PA12G with steel core module 2.5 45 teeth tooth width 25mm outside diameter 117,5mm
Material: Outer part: Plastic PA 12 G with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties.
Article ID: 23255045