Replacement seal for Storz coupling, made of NBR, Storz size 100, Tappet distance 115 mm

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range -1 / 0 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight screw-in fitting, with O-ring, G 1/8 o., for hose 6/4 mm, AF 13, Working pressure max. 18 bar, nickel-plated brass

Internal gear made of 1.4305 (AISI303) module 1,0 60 teeth teeth width 10mm
Material: Stainless steel 1.4305.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.
Article ID: 22499460

Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 13 teeth material steel teeth induction hardened
Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored.
General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other
dimensions: See the table.

Article ID: 12188113

Product inlet/outlet size : #180 mm
SBP-1818-F-F1B-B-B
SKU: SBPF180001
Stock *: 0
Max. capacity: 50 m³/h
No of magnets: 2
Weight: 85 kg
For filtering ferrous contaminants from coarse, free-falling, high-capacity pipelines.The magnet plates are placed outside the product channel to secure an unobstructed product flow.Cleaning is quick and easy, by means of a hinged extractor plate (quick-cleaning).

Quick cleaning through use of extractor plates
Capacity up to 200 m³/h
With neodymium or ferrite plate magnets
Installation height 400 to 760 mm
Capture Fe particles from 0.5 mm

Application

Free-fall pipes for powders & granulates

External pole magnets filter ferromagnetic (Fe) impurities – such as iron and steel – from 0.5 to 50 mm out of powders and granulates in free-fall lines. They are used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.
 
External pole magnets are very robust and are able to process high capacities. The magnets are located outside the product channel, so the product can fall through freely.
 
If fine ferrous particles must be separated from powder flows, we recommend our Cleanflow magnets.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Two magnetic plates are located opposite each other, outside the product chute. They have a deeply reaching, powerful holding field, which is strengthened through clever construction of the magnets. This enables them to 'capture' Fe particles from the product stream.
 
The magnets are fitted with hinged extractor plates for quick and easy cleaning. The magnets attract the ferrous contaminants, and clamp them against the extractor plate. Ridges on the extractor plate provide extra 'shelter' and extra clamping force for the captured ferrous parts. As a result, the product flow cannot "drag them along" again.
 
Summary of important specifications

Magnet quality ferrite or neodymium
Materials housing and materials in contact with product: stainless steel
Finishing: grit blasted / magnets painted
Material gaskets neodymium version: Silicone acc. EC1935 / FDA
Material gaskets ferrite version: sponge rubber / silicone


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.
 
Options

Magnet quality: ferrite or neodymium
Basic type: standard execution, grit blasted

Round or square in-/outlet
Food/pharma type: hygienic execution, polished

Only square in-/outlet


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The 2 magnetic plates are placed on the outside of the product channel. Therefore a guide profile is placed in the center of the inlet flange, to force the product flow towards the magnets. The product contaminated with ferrous particles passes the magnets while flowing through the separator.
The magnets attract the ferrous particles, which are then held against the extractor plate. Ridges on the extractor plates provide extra 'shelter' and extra clamping force for the captured ferrous particles, so that the product flow cannot 'drag' them along again.
 
How does the cleaning / iron discharging work?
For these quick-cleaning type external pole magnets, you need to interrupt the product flow in order to be able to clean the magnets.
 
Swing the magnets with extractor plates completely outwards. Then turn the hinged extractor plates away from the magnets. As soon as the captured ferrous particles are out of the magnetic field reach, they will automatically fall off.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the quick-release clamps
Swing the complete magnet unit as far away from the housing as possible
Swing the extractor plate away from the magnet
The ferrous particles now fall from the extractor plates; collect and dispose of them
Clean all parts with a soft, clean cloth and - if necessary - a suitable cleaning liquid
Swing the extractor plate back against the magnet
Swing the complete magnet unit back against the housing
Retighten the quick-release clamps
Restart the product flow

Conical seat DIN 6319 diameter 36mm for bolt diameter 20mm steel hardened
Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. * max. statical load. ** total height, together with spherical washer DIN 6319.
Article ID: 65552000

Precision worm wheel centre distance 65mm i=12.66 38 teeth
Material: Special brass CuZn40Al2/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency.

Article ID: 32331200

Precision single universal joint WER DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301
Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199240N

Filter regulator »variobloc«, Metal container incl. viewing tube and pressure gauge, Size 2, G 1, Input pressure max. 20 bar
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design, combined
with a centrifugal separator.
The pressure setting can be locked by pushing the knob down.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Male elbow, NPT 1/4 o., Pipe exterior Ø 6 mm, PN max. 630 bar, a/f1 17, a/f2 12, galvanised steel
Male elbow, NPT thread, heavy type

Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ63, Stroke90, G1/8, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Pressure regulator, continuous pressure supply »FUTURA-mini«, incl. compact press. gauge, Size 0, G 1/4, PE max. 12 bar, 0.5-8 bar
Diaphragm pressure regulators with self-relieving design and excellent flow rates
in modern design for mounting side by side.
By assembling two or more controllers together, it is possible to supply several working air circuits with different output pressures via a single supply line. The regulator button can be latched.

Kamlok quick-connect socket with interior thread, D type, Aluminium, G 3/4, for plug Ø 32 mm, Pressure max. 16 bar, max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Hollow screw, Single, G 3/8, Working pressure max. 16 bar, Operating temperature -20 °C to 70 °C, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0 - 6 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Double threaded nipple 280, ET/ET, R 1/4, Operating temperature -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Internal gear made of 1.4305 (AISI303) module 1,0 70 teeth teeth width 10mm
Material: Stainless steel 1.4305.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.
Article ID: 22499470

Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 14 teeth material steel teeth induction hardened
Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored.
General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other
dimensions: See the table.

Article ID: 12188114

Product inlet/outlet size : #260 mm
SBP-2626-F-F1B-B-B
SKU: SBPF260001
Stock *: 0
Max. capacity: 100 m³/h
No of magnets: 2
Weight: 225 kg
For filtering ferrous contaminants from coarse, free-falling, high-capacity pipelines.The magnet plates are placed outside the product channel to secure an unobstructed product flow.Cleaning is quick and easy, by means of a hinged extractor plate (quick-cleaning).

Quick cleaning through use of extractor plates
Capacity up to 200 m³/h
With neodymium or ferrite plate magnets
Installation height 400 to 760 mm
Capture Fe particles from 0.5 mm

Application

Free-fall pipes for powders & granulates

External pole magnets filter ferromagnetic (Fe) impurities – such as iron and steel – from 0.5 to 50 mm out of powders and granulates in free-fall lines. They are used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.
 
External pole magnets are very robust and are able to process high capacities. The magnets are located outside the product channel, so the product can fall through freely.
 
If fine ferrous particles must be separated from powder flows, we recommend our Cleanflow magnets.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Two magnetic plates are located opposite each other, outside the product chute. They have a deeply reaching, powerful holding field, which is strengthened through clever construction of the magnets. This enables them to 'capture' Fe particles from the product stream.
 
The magnets are fitted with hinged extractor plates for quick and easy cleaning. The magnets attract the ferrous contaminants, and clamp them against the extractor plate. Ridges on the extractor plate provide extra 'shelter' and extra clamping force for the captured ferrous parts. As a result, the product flow cannot "drag them along" again.
 
Summary of important specifications

Magnet quality ferrite or neodymium
Materials housing and materials in contact with product: stainless steel
Finishing: grit blasted / magnets painted
Material gaskets neodymium version: Silicone acc. EC1935 / FDA
Material gaskets ferrite version: sponge rubber / silicone


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.
 
Options

Magnet quality: ferrite or neodymium
Basic type: standard execution, grit blasted

Round or square in-/outlet
Food/pharma type: hygienic execution, polished

Only square in-/outlet


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The 2 magnetic plates are placed on the outside of the product channel. Therefore a guide profile is placed in the center of the inlet flange, to force the product flow towards the magnets. The product contaminated with ferrous particles passes the magnets while flowing through the separator.
The magnets attract the ferrous particles, which are then held against the extractor plate. Ridges on the extractor plates provide extra 'shelter' and extra clamping force for the captured ferrous particles, so that the product flow cannot 'drag' them along again.
 
How does the cleaning / iron discharging work?
For these quick-cleaning type external pole magnets, you need to interrupt the product flow in order to be able to clean the magnets.
 
Swing the magnets with extractor plates completely outwards. Then turn the hinged extractor plates away from the magnets. As soon as the captured ferrous particles are out of the magnetic field reach, they will automatically fall off.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the quick-release clamps
Swing the complete magnet unit as far away from the housing as possible
Swing the extractor plate away from the magnet
The ferrous particles now fall from the extractor plates; collect and dispose of them
Clean all parts with a soft, clean cloth and - if necessary - a suitable cleaning liquid
Swing the extractor plate back against the magnet
Swing the complete magnet unit back against the housing
Retighten the quick-release clamps
Restart the product flow

Worm wheel made of bronze, module 1.5 100 teeth single-thread right hand
Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking.

Article ID: 30103200

Key steel DIN 6880 12 x 8 x 1000 mm material stainless steel 1.4571
Material: Stainless steel 1.4571. Standard length about 1000 mm.

Article ID: 61991208

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 80, Stroke 75, G 3/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Reducer, Pipe exterior Ø Female connector 25/16 mm, PN max. 400 bar, a/f1 27, a/f2 30, a/f3 46, galvanised steel
Reducer, heavy type

Spiral hose, Fitting and kink protection spring, Polyamide, R 1/4, Hose Ø 8x6, PN at 23 °C max. 19 bar, Length 10 m
For safe and effective flow.
Thanks to their small coil diameter, they are compact, easy to handle and lightweight.

Pressure regulator continuous pressure supply »FUTURA-mini«, incl. compact press. gauge, Size 0, G 1/4, PE max. 12 bar, 0.5-10 bar
Diaphragm pressure regulators with self-relieving design and excellent flow rates
in modern design for mounting side by side.
By assembling two or more controllers together, it is possible to supply several working air circuits with different output pressures via a single supply line. The regulator button can be latched.

Push-in X-connector »Blue Series«, for hose exterior Ø 8 mm, Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

T screw-in fitting, ET conical, R 3/8, for hose 8/6 mm, AF 11, Working pressure max. 18 bar, nickel-plated brass

Pipe double nipple, R 1/4, Length 120 mm, Working pressure max. 40 bar, Stainless steel 1.4571

Bracket 90, 90°, IT/IT, Rp 1/4, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Feather key DIN 6885 version A 10 x 8 x 45 mm material C45
Material: C45K.Version A.
Article ID: 61817600

Internal gear made of 1.4305 (AISI303) module 1,0 72 teeth teeth width 10mm
Material: Stainless steel 1.4305.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.
Article ID: 22499472

Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 15 teeth material steel teeth induction hardened
Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored.
General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other
dimensions: See the table.

Article ID: 12188115

Product inlet/outlet size : #360 mm
SBP-3636-F-F1B-B-B
SKU: SBPF360001
Stock: 1
Max. capacity: 200 m³/h
No of magnets: 2
Weight: 305 kg
For filtering ferrous contaminants from coarse, free-falling, high-capacity pipelines.The magnet plates are placed outside the product channel to secure an unobstructed product flow.Cleaning is quick and easy, by means of a hinged extractor plate (quick-cleaning).

Quick cleaning through use of extractor plates
Capacity up to 200 m³/h
With neodymium or ferrite plate magnets
Installation height 400 to 760 mm
Capture Fe particles from 0.5 mm

Application

Free-fall pipes for powders & granulates

External pole magnets filter ferromagnetic (Fe) impurities – such as iron and steel – from 0.5 to 50 mm out of powders and granulates in free-fall lines. They are used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.
 
External pole magnets are very robust and are able to process high capacities. The magnets are located outside the product channel, so the product can fall through freely.
 
If fine ferrous particles must be separated from powder flows, we recommend our Cleanflow magnets.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Two magnetic plates are located opposite each other, outside the product chute. They have a deeply reaching, powerful holding field, which is strengthened through clever construction of the magnets. This enables them to 'capture' Fe particles from the product stream.
 
The magnets are fitted with hinged extractor plates for quick and easy cleaning. The magnets attract the ferrous contaminants, and clamp them against the extractor plate. Ridges on the extractor plate provide extra 'shelter' and extra clamping force for the captured ferrous parts. As a result, the product flow cannot "drag them along" again.
 
Summary of important specifications

Magnet quality ferrite or neodymium
Materials housing and materials in contact with product: stainless steel
Finishing: grit blasted / magnets painted
Material gaskets neodymium version: Silicone acc. EC1935 / FDA
Material gaskets ferrite version: sponge rubber / silicone


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.
 
Options

Magnet quality: ferrite or neodymium
Basic type: standard execution, grit blasted

Round or square in-/outlet
Food/pharma type: hygienic execution, polished

Only square in-/outlet


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The 2 magnetic plates are placed on the outside of the product channel. Therefore a guide profile is placed in the center of the inlet flange, to force the product flow towards the magnets. The product contaminated with ferrous particles passes the magnets while flowing through the separator.
The magnets attract the ferrous particles, which are then held against the extractor plate. Ridges on the extractor plates provide extra 'shelter' and extra clamping force for the captured ferrous particles, so that the product flow cannot 'drag' them along again.
 
How does the cleaning / iron discharging work?
For these quick-cleaning type external pole magnets, you need to interrupt the product flow in order to be able to clean the magnets.
 
Swing the magnets with extractor plates completely outwards. Then turn the hinged extractor plates away from the magnets. As soon as the captured ferrous particles are out of the magnetic field reach, they will automatically fall off.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the quick-release clamps
Swing the complete magnet unit as far away from the housing as possible
Swing the extractor plate away from the magnet
The ferrous particles now fall from the extractor plates; collect and dispose of them
Clean all parts with a soft, clean cloth and - if necessary - a suitable cleaning liquid
Swing the extractor plate back against the magnet
Swing the complete magnet unit back against the housing
Retighten the quick-release clamps
Restart the product flow

Neoprene timing belt 64 MXL 012 80 teeth Lw 162.56mm belt width 3.2mm
Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC.
Article ID: 18163000

Worm wheel made of bronze module 1.5 100 teeth double-thread right hand
Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking.

Article ID: 30123200

Bevel gear made of stainless steel 1.4305 module 3 30 teeth i=2:1
Material: Stainless steel 1.4305. Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Article ID: 36199457

Mist oiler »multifix«, Metal container, Viewing tube, Size 4, G 3/4, Input pressure max. 20 bar, Medium / ambient temp. max. 60 °C
Proportional lubricators, oil can be filled under pressure.

Angled mini ball valve, Control panel integration, Brass chrome plated, Operating temp. -20°C to 80°C, G 1/4 IT, PN -0.99 - 20 bar

Spiral hose, Fitting and kink protection spring, Polyamide, R 1/4, Hose Ø 10x8, PN at 23 °C max. 15 bar, Length 5 m
For safe and effective flow.
Thanks to their small coil diameter, they are compact, easy to handle and lightweight.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 10, Stroke 50, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Flat suction cup, oval, Silicone material, »SGO«, Ø7x3,5 suitable connection nipple ET M3
Robust and hard-wearing suction pad with a single, oval-shaped sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to handle long or flat workpieces. Due to its oval shape, it has a considerably higher suction force than round, flat suction pads when handling narrow or long workpieces.
It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Higher suction force for narrow workpiecesSupports on the bottomHigh suction force in spite of small dimensions

Applications:
Handling narrow workpieces and stripsHandling workpieces with only a small, narrow gripping surface

Extension piece, short, G 1/2 o., G 1/2 i., AF 25, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Pipe double nipple, R 1/2, Length 100 mm, Working pressure max. 40 bar, Stainless steel 1.4571

Double threaded nipple 280, ET/ET, R 3/8, Operating temperature -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Internal gear made of 1.4305 (AISI303) module 1,0 80 teeth teeth width 10mm
Material: Stainless steel 1.4305.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.
Article ID: 22499480

Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 16 teeth material steel teeth induction hardened
Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored.
General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other
dimensions: See the table.

Article ID: 12188116

Description : External pole magnets - continuous automatic cleaning
SBP-Automatic
SKU: SBP_dummy
Product inlet size: 400 -1200 mm
External pole magnets are a good solution for applications with large amounts of ferrous contamination and where operator access is hard.Automatic cleaning during production, no production stop required.

Automatic cleaning (continuous)
Capacity up to 150 m³/h
With neodymium plate magnets

Cylindrical bush slotted version 20 x 23 x 20 mm
Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8

Article ID: 62402020

Spur gear made of POM with hub module 2,5 90 teeth tooth width 20mm outside diameter 230mm
Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws.
Article ID: 29709000

Precision housing KG ISO series 3 bore 75mm closed for linear bearing for shaft Ø 50mm
Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple.

Article ID: 64655000

Mist oiler »multifix«, Metal container, Viewing tube, Size 4, G 1, Input pressure max. 20 bar, Medium / ambient temp. max. 60 °C
Proportional lubricators, oil can be filled under pressure.

Locking screw, Exterior hexagonal and flange, G 1 1/4, AF 30, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

3/2-way valve, manual, Rotating lever, NC, monostable, Connection G 1/8, Operating pre. 2.5-10 bar, Operating temp. -10°C to 60°C
3 valve positions only in conjunction with a second 3/2-way valve. Corresponds to a 5/3-way valve.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 10, Stroke 60, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Straight screw-in fitting, G 3/8 o., for hose 8/10 mm, AF 22, Working pressure max. 10 bar (20°C)/max. 1 bar (60°C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Elbow 3, Long, 90°, ET/ET, R 3/8, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Interior thread pipe DN 9, Brass 2.0401, M16x1.5 IT, Pipe exterior Ø 14 mm, Operating pressure max. 15 bar, Temp. -20 °C to 160 °C

Bushing 240, reducing, IT/IT, Rp 3/8, Rp 1/4, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Internal gear made of 1.4305 (AISI303) module 1,0 90 teeth teeth width 10mm
Material: Stainless steel 1.4305.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.
Article ID: 22499490