Screw-in hose connector, G 1/2 o., for hose I.D. 9 mm, AF 24, brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Captive plug-in connector I.D. 7.8, Bright brass, Sleeve I.D.6, brown, Operating pr. 0-35 bar, Medium/ambient temp. -20°C to 100°C

Single ring supports, for G 1/8, for hose 8/6 mm, Operating pressure 0 - 10 bar, Temperature -10 °C to 60 °C, POM

Suitable for belt width : 1000 mm
RBE-EP8-090x092-100-A-NA
SKU: SZBE052001
Stock: 0
Advised max. installation height: 225-360 mm
Height: 670 mm
Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

Max. installation height 400 mm
Manual quick cleaning
Switchable (electromagnet)
Electrical power supply required
Max. temp. 80 °C

Application

Application

Electromagnetic suspended magnets have a very deeply penetrating holding field. This makes them very suitable for larger capacities. Electromagnetic suspended magnets can be switched on and off. This simplifies cleaning (when the magnet is switched off the Fe particles fall off the block), and they are more flexible as they can be activated whenever the process requires their use. However, electromagnetic suspended magnets do consume power, and they require a control box. They are also less compact than permanent suspended magnets: a sizeable electric coil is needed in order to generate a powerful magnetic field. This makes them less suitable for mobile installations and somewhat more expensive than permanent suspended magnets.

Cleaning

Cleaning

Cleaning of the block magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away, from the magnet; the Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field.

Placement

Placement

A block magnet is hung above a conveyor belt, by means of chains or cables. The addition of these magnets can considerably boost separation yield:
 
Placement over pulley: In this configuration the magnet hangs at an angle over the end of the conveyor belt, where discharge of the material occurs. This is the ideal situation, because the bulk flow is 'broken open' at this point. When this happens, the iron particles are exposed within the surrounding material. This allows them to be more easily drawn to the magnet. Keep in mind, however, that it is important for the construction directly beneath the magnet to be made of non-magnetic material; otherwise it, too, will become magnetized.
 
Placement over band: This position is used for small layer thickness (or mono-layers). Or when there is no other option due to the potential for magnetization of underlying steel components (such as motors or guide rollers).

Working principle

Working principle

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts. The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).
 
They are used to check incoming product flows and for the protection of machines, such as shredders and sieves. When heavy metal contamination is present, it is better to use an overbelt magnet; This type continuously carries away the iron particles.

S84 – S85 – S86 General features
Sensor type: catalytic, standard.
Measurement range 0…100% LEL.
Sensor precision ± 5% of the probe scale, ± 10% of reading.
Precision (semiconductor) ± 10% of full scale (the calibration point).
Repeatability ± 5% of full scale, ± 10% of reading.
Measurement resolution 1% LEL.
Digital processing of Kalman filter measurement.
Preheating time < 2m.
Stabilization time < 2m.
Maximum response time < 20s (T50), < 60s (T90).
Average life time of the sensor in air 255 weeks.
Environment temperatures:– operating -20 ÷ 50 °C;– storage -20 ÷ 70 °C.
Environment humidity without condensation:– operating 15 ÷ 90 %UR;– storage 45 ÷ 75 %UR.
Operating pressure (KPa) 80 ÷ 110.
Air speed (m/s): ± 6.
Optical signals – red LED visible on the powered probe.
Dimensions: 164 x 100 x 82 mm.
Unit weight 0.8 Kg.
Electric features
Power supply: 11 ÷ 28 Vdc.
Absorption: maximum 3.2 W.

Star knob similar to DIN 6335 made from plastic type K diameter 25mm
Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass.

Article ID: 66052500

2/2 solenoid valve DN 20 port G3/4, 24V DC
Material: Housing: Brass. Seat seal: NBR (Perbunan). Internal parts: Stainless steel, PVDF, Brass. - For neutral gaseous and liquid fluids. - Electromagnetically actuated valve, with forced valve lifting. - Diaphragm valves. - Connection internal thread G3/4 and G1. - Operating pressure 0 to 10 bar (up to 25 mm²/s cSt). For contaminated fluids insertion of a strainer is recommended. Description (standard unit) Solenoid valve for, e.g., air , water, oil. Switching function: Normally closed. Flow direction: determined. Fluid temperature: -10°C to max. +90°C. Ambient temperature: -10°C to max. +50°C. Mounting position: optional, preferably solenoid vertical on top. Features - High flow rate. - For rugged applications. - Damped operation. - Suitable for vacuum. - For systems with low or changing pressure difference. - Valve works without minimum pressure difference (Zero Delta P). - Solenoid can be replaced without tools.

Article ID: 85123411

Storz adapter, Stainless steel V4A, Storz size 75-B, Tappet distance 89 mm, G 2 1/2 IT, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Safety jaw coupling with hose connection, I.D. 19 (3/4"), DN 15, Malleable cast iron, Operating pressure max. 16 bar
Universal standard coupling in safety design according to DIN 3238 for absolutely secure compressed air lines on construction sites or in industry.

Easy to couple, secured against accidental opening: just screw the ring tight after coupling!

- Robust couplings with malleable iron head, steel stem with special profile,
zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- Large bore for increased flow rate

Wear part set, consisting of: Diaphragm, Valve cone and O-ring 68x3, for filter regulator »Standard«, Size 4, G 3/4 and G 1

3/2-way valve, Mechanically actuated, »M3«, Tappet, NC, G 1/8, Operating pressure 0 - 10 bar, Temperature range -20 °C to 70 °C
3/2-way valves
- Mechanically operated -

1/3 Tube fitting, G 1 x 25 mm, taper seat, with collar, heavy-duty type, Brass with a bare metal surface

Plug connection Mach 11 for lineonline solenoid valves

Captive plug-in connector I.D. 7.8, Bright brass, Sleeve I.D.6 blue, Operating pr. 0-35 bar, Medium / ambient temp. -20°C to 100°C

Locking screw Hexagonal socket without flange M12x1.5nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Round trapezoidal nut nylatron Tr.50 x 8 single-start right length 100mm outer diameter 90mm
Material: Plastic (PA6.6 with MoS2), black.

Tolerance zone 7H.

Height = 2 x diameter.

Article ID: 64345000

S84 – S85 – S86 General features
Sensor type: catalytic, standard.
Measurement range 0…100% LEL.
Sensor precision ± 5% of the probe scale, ± 10% of reading.
Precision (semiconductor) ± 10% of full scale (the calibration point).
Repeatability ± 5% of full scale, ± 10% of reading.
Measurement resolution 1% LEL.
Digital processing of Kalman filter measurement.
Preheating time < 2m.
Stabilization time < 2m.
Maximum response time < 20s (T50), < 60s (T90).
Average life time of the sensor in air 255 weeks.
Environment temperatures:– operating -20 ÷ 50 °C;– storage -20 ÷ 70 °C.
Environment humidity without condensation:– operating 15 ÷ 90 %UR;– storage 45 ÷ 75 %UR.
Operating pressure (KPa) 80 ÷ 110.
Air speed (m/s): ± 6.
Optical signals – red LED visible on the powered probe.
Dimensions: 164 x 100 x 82 mm.
Unit weight 0.8 Kg.
Electric features
Power supply: 11 ÷ 28 Vdc.
Absorption: maximum 3.2 W.

2/2 solenoid valve DN 20 port G3/4 230V 50/60Hz
Material: Housing: Brass. Seat seal: NBR (Perbunan). Internal parts: Stainless steel, PVDF, Brass. - For neutral gaseous and liquid fluids. - Electromagnetically actuated valve, with forced valve lifting. - Diaphragm valves. - Connection internal thread G3/4 and G1. - Operating pressure 0 to 10 bar (up to 25 mm²/s cSt). For contaminated fluids insertion of a strainer is recommended. Description (standard unit) Solenoid valve for, e.g., air , water, oil. Switching function: Normally closed. Flow direction: determined. Fluid temperature: -10°C to max. +90°C. Ambient temperature: -10°C to max. +50°C. Mounting position: optional, preferably solenoid vertical on top. Features - High flow rate. - For rugged applications. - Damped operation. - Suitable for vacuum. - For systems with low or changing pressure difference. - Valve works without minimum pressure difference (Zero Delta P). - Solenoid can be replaced without tools.

Article ID: 85123412

Rod end GT-R DIN 12240-4 series K internal thread M22x1,5 right maintenance-free stainless steel
Material: Outer part: Stainless steel 1.4057, forged. Inner ring:
Stainless steel 1.4034, hardened, ground and polished. Bearing race:
Stainless steel 1.4571 with PTFE-Lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread
either right-handed or left-handed.
Heavy-duty rod ends for high radial loads in corrosive areas.

Stainless steel on PTFE-lining.

Maintenance-free.

Article ID: 63299622

Active charcoal filter »multifix« with metal container, 0.005 mg/m³, Size 3, G 1/2, Input pressure max. 16 bar, Temp. max. 60 °C
For filtering odours out of compressed air.

The activated carbon absorbs the oil vapour molecules contained in the compressed air.
A separate filter route prevents activated carbon particles from entering the air flow.

Safety jaw coupling with hose connection, I.D. 25 (1"), DN 19, Malleable cast iron, Operating pressure max. 16 bar
Universal standard coupling in safety design according to DIN 3238 for absolutely secure compressed air lines on construction sites or in industry.

Easy to couple, secured against accidental opening: just screw the ring tight after coupling!

- Robust couplings with malleable iron head, steel stem with special profile,
zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- Large bore for increased flow rate

Mounting bracket made of stainless steel 1.4401 with nut M50x1.5

5/2-way valve, Push button actuation, »3L« Control panel integration, G 1/4, Operating pressure 0-8 bar, Temp. range -20°C to 70°C
The hand lever latches when pushed or pulled.

1/3 Tube fitting, G 1 1/4 x 32 mm, with NBR O-ring, with collar, Brass with a bare metal surface

Screw-on hose connector, G 3/8 i., for hose I.D. 8 mm, AF 19, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Captive plug-in connector I.D. 7.8, Bright brass, Sleeve I.D.6, green, Operating pr. 0-35 bar, Medium/ambient temp. -20°C to 100°C

1/3 Tube fitting, G 1/2 x 10 mm, taper seat, without collar, lightweight type, Brass with a bare metal surface

ZD..NC General features
Voltage tolerance: -15% / +10%.
Environment temperature: -15°C / +60°C.
Working pressure: 500 mbar Max.
Closing time < 1 second.
Protection degree: IP65.
Cable gland: PG 9.
Pressure inlets: G1/4” on two sides (except models with brass body).
Limit switch: by request from 3/4” to 4”.
Gas type: Air and non-aggressive gases (EN 437).
Filter: 600 μm (except models with brass body).
Electric features
Rated voltage: 230Vac – 50/60Hz or 24Vac/dc
Upon request valves are available with coils for the following voltages: 110V AC 50/60Hz or 12V AC/DC

Linear bearing unit KG-3 ISO series 3 Economy-Line with self-aligning linear ball bearing with seals for shaft Ø 30mm
Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Article ID: 64673002

Rod end GT-R DIN 12240-4 series K internal thread M22x1,5 left maintenance-free stainless steel
Material: Outer part: Stainless steel 1.4057, forged. Inner ring:
Stainless steel 1.4034, hardened, ground and polished. Bearing race:
Stainless steel 1.4571 with PTFE-Lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread
either right-handed or left-handed.
Heavy-duty rod ends for high radial loads in corrosive areas.

Stainless steel on PTFE-lining.

Maintenance-free.

Article ID: 63299722

Microfilter »multifix« with metal container, 0.01 µm, Size 3, G 1/2, Input pressure max. 16 bar, Med. / ambient temp. max. 60 °C
For filtering out solid impurities larger than 0.01 µm.

Dirt strainer, bright brass, Sieve insert mesh width 0.2 mm, Operating temp. -20 °C to 110 °C, G 1, DN 25, PN max. 20 bar
Suitable for domestic water services, heating and air conditioning plants or compressed air systems. Not suitable for steam.

Mounting bracket made of stainless steel 1.4401 with nut M45x1.5

5/2-way valve, Push button actuation, »3L« Control panel integration, G 1/8, Operating pressure 0-8 bar, Temp. range -20°C to 70°C
The hand lever latches when pushed or pulled.

2/3 Tube fitting, G 1 x 19 mm, swivel nut, lightweight CH type, Brass with a bare metal surface

Mounting bracket incl. 2 screws 3x16, 2 hexagonal nuts, 2 spring washers, 4 washers, suitable for all components

Captive plug-in connector I.D. 7.8, Bright brass, Sleeve I.D.9 blue, Operating pr. 0-35 bar, Medium / ambient temp. -20°C to 100°C

Straight screw-in fitting, »value line«, G 1/8 o., for hose 6/4 mm, AF 13, Operating pressure max. 18 bar, nickel-plated brass
Straight connectors
Nickel-plated brass, »value line« Series

Feather key DIN 6885 version A 8 x 7 x 50 mm material C45
Material: C45K.Version A.
Article ID: 61815400

Thermostatic valve series 158 General features
Available with chrome frame finish
Double micrometric adjustment
Operating temperature: -10° C to +110° C
Lockshield valve calibration by Allen key (6 mm)
ABS cap
Screw sealing by EPDM O Ring
Tailpiece sealing by O Ring
Threads according to UNI ISO 228
Brass body

Shaft collar DIN 705 A with set screw with slot bore 4 mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 62399004

Precision double universal joint WDN with needle bearing DIN808 double bore 20H7
material steel total length 156mm outer diameter 40mm
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63164000

Neoprene timing belt HTD 8M width 85mm Lw 1280mm 160 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17573000

Pre-filter »multifix« with metal container, 0.3 µm, Size 3, G 1/2, Input pressure max. 16 bar, Medium / ambient temp. max. 60 °C
For filtering out solid impurities larger than 0.3 µm.

Quick-connect coupling I.D. 7.8, Steel, G 1/2 IT, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C
Single-sided blocking, high quality and robust quick connect coupling for high flow values.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

These quick disconnect couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, workshops, automotive, mining.

Compressed air / liquid gun, infinitely variable, POM, Temp. max. 60 °C, PN max. 16 bar, Nipple with water coupling plug
This multifunctional blow gun effectively cleans surfaces with compressed air, water or cooling lubricant. Meets OSHA safety standards when dead-ended. Precise flow is achieved by adjustable flow settings. Nozzle adjusts from narrow jet to wide beam. Ergonomic, non-slip grip with built-in anti-whip function.

Straight screw-in fitting, Soft seal, G 3/4, Pipe exterior Ø 18 mm, PN max. 315 bar, Stainless steel 1.4571
Version with parallel thread and soft seal made of NBR.

2/3 Tube fitting, G 1 x 25 mm, swivel nut, lightweight CH type, Brass with a bare metal surface

Flange fastening, for round cylinder ISO 6432, Piston Ø 8-10, 1 piece
Flange model

Captive plug-in connector I.D. 7.8, Bright brass, Sleeve I.D. 6, red, Operating pr. 0-35 bar, Medium/ambient temp. -20°C to 100°C

Head nut for cover / floor, for round cylinder ISO 6432, Piston Ø 12-16, M16x1.5, Cylinder is delivered without nut
Head nut for cover / base

Suitable for belt width : 1300 mm
RBE-EP9-100x128-130-A-NA
SKU: SEBM070001
Stock: 0
Advised max. installation height: 275-400 mm
Height: 650 mm
Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

Max. installation height 400 mm
Manual quick cleaning
Switchable (electromagnet)
Electrical power supply required
Max. temp. 80 °C

Application

Application

Electromagnetic suspended magnets have a very deeply penetrating holding field. This makes them very suitable for larger capacities. Electromagnetic suspended magnets can be switched on and off. This simplifies cleaning (when the magnet is switched off the Fe particles fall off the block), and they are more flexible as they can be activated whenever the process requires their use. However, electromagnetic suspended magnets do consume power, and they require a control box. They are also less compact than permanent suspended magnets: a sizeable electric coil is needed in order to generate a powerful magnetic field. This makes them less suitable for mobile installations and somewhat more expensive than permanent suspended magnets.

Cleaning

Cleaning

Cleaning of the block magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away, from the magnet; the Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field.

Placement

Placement

A block magnet is hung above a conveyor belt, by means of chains or cables. The addition of these magnets can considerably boost separation yield:
 
Placement over pulley: In this configuration the magnet hangs at an angle over the end of the conveyor belt, where discharge of the material occurs. This is the ideal situation, because the bulk flow is 'broken open' at this point. When this happens, the iron particles are exposed within the surrounding material. This allows them to be more easily drawn to the magnet. Keep in mind, however, that it is important for the construction directly beneath the magnet to be made of non-magnetic material; otherwise it, too, will become magnetized.
 
Placement over band: This position is used for small layer thickness (or mono-layers). Or when there is no other option due to the potential for magnetization of underlying steel components (such as motors or guide rollers).

Working principle

Working principle

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts. The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).
 
They are used to check incoming product flows and for the protection of machines, such as shredders and sieves. When heavy metal contamination is present, it is better to use an overbelt magnet; This type continuously carries away the iron particles.

S84 – S85 – S86 General features
Sensor type: catalytic, standard.
Measurement range 0…100% LEL.
Sensor precision ± 5% of the probe scale, ± 10% of reading.
Precision (semiconductor) ± 10% of full scale (the calibration point).
Repeatability ± 5% of full scale, ± 10% of reading.
Measurement resolution 1% LEL.
Digital processing of Kalman filter measurement.
Preheating time < 2m.
Stabilization time < 2m.
Maximum response time < 20s (T50), < 60s (T90).
Average life time of the sensor in air 255 weeks.
Environment temperatures:– operating -20 ÷ 50 °C;– storage -20 ÷ 70 °C.
Environment humidity without condensation:– operating 15 ÷ 90 %UR;– storage 45 ÷ 75 %UR.
Operating pressure (KPa) 80 ÷ 110.
Air speed (m/s): ± 6.
Optical signals – red LED visible on the powered probe.
Dimensions: 164 x 100 x 82 mm.
Unit weight 0.8 Kg.
Electric features
Power supply: 11 ÷ 28 Vdc.
Absorption: maximum 3.2 W.

Precision double universal joint WDN with needle bearing DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63164000N

Neoprene timing belt HTD 8M width 85mm Lw 1360mm 170 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17573200

Push-in T-fitting, L-shape, rotating, G 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Quick-connect coupling I.D. 7.8, Steel, Sleeve I.D. 13, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C
Single-sided blocking, high quality and robust quick connect coupling for high flow values.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

These quick disconnect couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, workshops, automotive, mining.

Active charcoal filter element, for active charcoal filter »variobloc«, Size 1, G 1/4 and G 3/8

Straight screw-in fitting, Soft seal, G 3/4, Pipe exterior Ø 22 mm, PN max. 160 bar, Stainless steel 1.4571
Version with parallel thread and soft seal made of NBR.

3/3 Tube fitting, G 3/4 x 13 mm, swivel nut, taper seat with NBR O-ring, Brass with a bare metal surface