Double threaded nipple, M5 o., M5 o., AF 7, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Rubber buffer GH ø 20mm height 25mm with through hole 8,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572025

Suitable for belt width : 700 mm
RBE-EP5-062x070-070-A-NA
SKU: SEBM020001
Stock: 0
Advised max. installation height: 170-240 mm
Height: 562 mm
Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

Max. installation height 400 mm
Manual quick cleaning
Switchable (electromagnet)
Electrical power supply required
Max. temp. 80 °C

Application

Application

Electromagnetic suspended magnets have a very deeply penetrating holding field. This makes them very suitable for larger capacities. Electromagnetic suspended magnets can be switched on and off. This simplifies cleaning (when the magnet is switched off the Fe particles fall off the block), and they are more flexible as they can be activated whenever the process requires their use. However, electromagnetic suspended magnets do consume power, and they require a control box. They are also less compact than permanent suspended magnets: a sizeable electric coil is needed in order to generate a powerful magnetic field. This makes them less suitable for mobile installations and somewhat more expensive than permanent suspended magnets.

Cleaning

Cleaning

Cleaning of the block magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away, from the magnet; the Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field.

Placement

Placement

A block magnet is hung above a conveyor belt, by means of chains or cables. The addition of these magnets can considerably boost separation yield:
 
Placement over pulley: In this configuration the magnet hangs at an angle over the end of the conveyor belt, where discharge of the material occurs. This is the ideal situation, because the bulk flow is 'broken open' at this point. When this happens, the iron particles are exposed within the surrounding material. This allows them to be more easily drawn to the magnet. Keep in mind, however, that it is important for the construction directly beneath the magnet to be made of non-magnetic material; otherwise it, too, will become magnetized.
 
Placement over band: This position is used for small layer thickness (or mono-layers). Or when there is no other option due to the potential for magnetization of underlying steel components (such as motors or guide rollers).

Working principle

Working principle

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts. The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).
 
They are used to check incoming product flows and for the protection of machines, such as shredders and sieves. When heavy metal contamination is present, it is better to use an overbelt magnet; This type continuously carries away the iron particles.

K20A, K30A, K40A General features
Cable composition:– 1.25 mm² conductors– Self-adjusting conductive core– Polyolefin insulating sheath– Braided copper sheath– Outer sheath in modified polyolefin
Minimum installation room temperature -35 °C
Maximum room temperature powered 65 °C
Maximum room temperature not powered 80 °C
Minimum storage room temperature -20 ÷ -25°C
Cable dimensions– 12.6 x 4.8 mm series K20A– 14.6 x 4.8 mm series K30A-K40A
Electric features
Power supply 230V-50Hz
Tolerance -0/+5 W
Power delivered– K20A 20 W/m at 10°C– K30A 30 W/m at 10°C– K40A 40 W/m at 10°C

Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm
Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Article ID: 35557600

Clamp collar double-split stainless steel 1.4305 bore 75mm with bolts DIN 912 A2-70
Material: Stainless steel 1.4305. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of nylon. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.
Article ID: 62399475

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0-100 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Adjustable straight fitting, Sealing cone, 360° rotating, Nut M30x2 i., Pipe exterior Ø 22 mm, PN max. 160 bar, galvanised steel

Filter element 40 µm, sintered bronze, for filter for high pressures up to 40 bar, G 1 1/2 and G 2

Angled screw-in fitting G 1/6 o., for hose 4/8 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (170 °C), PFA
Perfluoroalkoxy alkane (PFA): A fluoroplastic with the same chemical resistance as PTFE but much stronger and suitable for temperatures up to 200°C.

Adjustable male connector, with cone seal, G1/4 o., Pipe exterior Ø 8, PN max. 630, a/f1 19, a/f2 19, galvanised steel

Straight screw-in fitting, R 1/4 o., Pipe exterior Ø 10 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

Pressure gauge- screw connection, Sealing cone, G 1/4 i., Nut M16x1.5 i., Pipe exterior Ø 10 mm, PN max. 315 bar, galvanised steel
Pressure gauge fitting with cone seal, parallel female thread

Double hose connector, for hose I.D. 5 mm, Brass CW614N, Max. working pressure 16 bar, Max. medium/ambient temp. 90 °C

K20A, K30A, K40A General features
Cable composition:– 1.25 mm² conductors– Self-adjusting conductive core– Polyolefin insulating sheath– Braided copper sheath– Outer sheath in modified polyolefin
Minimum installation room temperature -35 °C
Maximum room temperature powered 65 °C
Maximum room temperature not powered 80 °C
Minimum storage room temperature -20 ÷ -25°C
Cable dimensions– 12.6 x 4.8 mm series K20A– 14.6 x 4.8 mm series K30A-K40A
Electric features
Power supply 230V-50Hz
Tolerance -0/+5 W
Power delivered– K20A 20 W/m at 10°C– K30A 30 W/m at 10°C– K40A 40 W/m at 10°C

Hexagon nut DIN 6330 steel strength 10 thread M8 right hand
Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement.

Article ID: 65320800

Spur gear made of plastic PA12G with steel core module 1.5 72 teeth tooth width 17mm outside diameter 111mm
Material: Outer part: Plastic PA 12 G with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties.
Article ID: 21855072

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0-250 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Distributor strip, Outlets both sides, front and back, Input 2 x 1/8, Output 4 + 4 x M5, Aluminium
For easy assembly of compressed air taps (screw fittings, unions, couplings, etc.).
Optionally with 2, 3, 4, or 6 outlets on one side or both sides.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 40, Stroke 20, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Solenoid coil 230 V AC, 50 Hz, for switch valve (3/2-way valve) »multifix-mini« and »multifix«

Double threaded nipple, Cyl., G 1/2 o., G 1 o., AF 38, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Straight push-in bulkhead connector »Blue Series«, M14x1.25, for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Y- angled piece fitting »Blue Series« rotating, G/G 3/8 i./o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Pipe double nipple 23, ET/ET, galvanised steel ST 37-2, R 1/2, Length 150 mm, Working pressure max. 50 bar
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Suitable for belt width : 800 mm
RBE-EP6-070x080-080-A-NA
SKU: SEBM030001
Stock: 0
Advised max. installation height: 180-280 mm
Height: 562 mm
Removal of large pieces of steel from bulk flows or in the recycling industry. Suitable for larger installation heights. Can be switched on and off.

Max. installation height 400 mm
Manual quick cleaning
Switchable (electromagnet)
Electrical power supply required
Max. temp. 80 °C

Application

Application

Electromagnetic suspended magnets have a very deeply penetrating holding field. This makes them very suitable for larger capacities. Electromagnetic suspended magnets can be switched on and off. This simplifies cleaning (when the magnet is switched off the Fe particles fall off the block), and they are more flexible as they can be activated whenever the process requires their use. However, electromagnetic suspended magnets do consume power, and they require a control box. They are also less compact than permanent suspended magnets: a sizeable electric coil is needed in order to generate a powerful magnetic field. This makes them less suitable for mobile installations and somewhat more expensive than permanent suspended magnets.

Cleaning

Cleaning

Cleaning of the block magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away, from the magnet; the Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field.

Placement

Placement

A block magnet is hung above a conveyor belt, by means of chains or cables. The addition of these magnets can considerably boost separation yield:
 
Placement over pulley: In this configuration the magnet hangs at an angle over the end of the conveyor belt, where discharge of the material occurs. This is the ideal situation, because the bulk flow is 'broken open' at this point. When this happens, the iron particles are exposed within the surrounding material. This allows them to be more easily drawn to the magnet. Keep in mind, however, that it is important for the construction directly beneath the magnet to be made of non-magnetic material; otherwise it, too, will become magnetized.
 
Placement over band: This position is used for small layer thickness (or mono-layers). Or when there is no other option due to the potential for magnetization of underlying steel components (such as motors or guide rollers).

Working principle

Working principle

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts. The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).
 
They are used to check incoming product flows and for the protection of machines, such as shredders and sieves. When heavy metal contamination is present, it is better to use an overbelt magnet; This type continuously carries away the iron particles.

K20A, K30A, K40A General features
Cable composition:– 1.25 mm² conductors– Self-adjusting conductive core– Polyolefin insulating sheath– Braided copper sheath– Outer sheath in modified polyolefin
Minimum installation room temperature -35 °C
Maximum room temperature powered 65 °C
Maximum room temperature not powered 80 °C
Minimum storage room temperature -20 ÷ -25°C
Cable dimensions– 12.6 x 4.8 mm series K20A– 14.6 x 4.8 mm series K30A-K40A
Electric features
Power supply 230V-50Hz
Tolerance -0/+5 W
Power delivered– K20A 20 W/m at 10°C– K30A 30 W/m at 10°C– K40A 40 W/m at 10°C

Ball screw spindle rolled 10x2mm length 1000mm
Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with Maedler® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Article ID: 64010023

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0 - 60 bar, Ø100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Storz adapter, Aluminium, Storz size 25-D, Tappet distance 31 mm, G 3/4 ET, Operating pressure max. 16 bar, Temp. -40 °C to 110 °C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 40, Stroke 20, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Solenoid coil 24 V AC, 50 Hz, for switch valve (3/2-way valve) »multifix-mini« and »multifix«

Locking screw, Exterior hexagonal, G 3/8, AF 19, Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Screw-in hose connector, G 3/4 o., for hose I.D. 9, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Adjustable T-fitting, Sealing cone, 360° rotating, Nut M14x1.5 i., Pipe exterior Ø 8 mm, PN max. 315 bar, galvanised steel

Screw-in hose connector, M3 o., for hose I.D. 3 mm, AF 5, brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Spur gear made of plastic PA12G with stainless steel core 1.4305 module 1.5 72 teeth tooth width 17mm outside diameter 111mm
Material: Outer part: Plastic
PA 12 G. Steel core: Stainless steel 1.4305.

Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range
-60°C to +120°C, short periods 150°C.

Special plastic with excellent material properties.

Enables snugly fitting, high strength shaft-hub connection.

Optimal force transmission due to cylindrical contact area.

Light, silent and clean, with excellent dry running properties.

Article ID: 21895072

Feather key DIN 6885 version A 3 x 3 x 25 mm material stainless steel 1.4571
Material: Stainless steel 1.4571.

Version A.

Article ID: 61899040

ECCF..GMA General features
The specific design and the high quality execution secure a long-term measuring stability.
Meter for cold water up to 50°C
REED IPG 14 sensor to transmit remotely the water metering measures.
Protection magnetic cover.
Dry clockwork with magnetic transmission.
Rotatable register at 360°C for an easier reading.
REED cable with 1.5 mt length, not extendable.
10 litres/pulse.
Reading capacity: 9,9999 m³.
Minimum displayed value: 0,0001 m³.

SKF single direction thrust ball bearing 51120 inner Ø 100mm outer Ø 135mm height 25mm
Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request.

Article ID: 51120-SKF

SKF self aligning ball bearing 2209 E-2RS1TN9 double row inner diameter 45mm outer diameter 85mm width 23mm sealed
Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request.
Article ID: 64773084

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0-160 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

T-multi-distributor »Blue Series«, 4-fold, rotating, G 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Compact cyl.ISO 21287,single-acting,female piston rod,retr.,magnet,PistonØ63,Stroke25,G1/8,Work.press.max.10bar,Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Solenoid coil 24 V DC, for switch valve (3/2-way valve) »multifix-mini« and »multifix«

Straight push-in fitting »metallica«, G 3/8 i., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Screw-on hose connector, G 3/8 i., for hose I.D. 4 mm, AF 19, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Screw-in supports made of brass, »speedfit« series, 1 BSP, for pipe exterior Ø 28 mm

Ferrule, Pipe exterior Ø 25 mm, PN max. 400 bar, galvanised steel
Ferrule, heavy type

Feather key DIN 6885 version A 10 x 8 x 28 mm material C45
Material: C45K.Version A.
Article ID: 61817200

ECCS..GMA General features
The specific design and the high quality execution secure a long-term measuring stability.
Meter for hot water up to 90°C
REED IPG 14 sensor to transmit remotely the water metering measures.
Protection magnetic cover.
Dry clockwork with magnetic transmission.
Rotatable register at 360°C for an easier reading.
REED cable with 1.5 mt length, not extendable.
10 litres/pulse.
Reading capacity: 9,9999 m³.
Minimum displayed value: 0,0001 m³.

Ball head precision levelling adjuster MN 686.4 50-33.0 stainless steel
Material: X10CrNiS18.9, Nr. 1.4305. For non-parall surfaces up to 4° slope. Lower overall height with short adjustment travel. Without lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68699465

Clamp collar single-split stainless steel 1.4305 bore 80mm with bolt DIN 912 A2-70
Material: Stainless steel 1.4305. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of nylon. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.
Article ID: 62399180

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0-600 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Storz adapter, Aluminium, Storz size 25-D, Tappet distance 31 mm, G 1/2 IT, Operating pressure max. 16 bar, Temp. -40 °C to 110 °C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

Compact cyl.ISO 21287, single-acting, male piston rod,retr.,magnet,PistonØ63,Stroke25,G1/8,Work.press.max.10bar,Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Solenoid coil 110 V AC, 50 Hz, for switch valve (3/2-way valve) »multifix-mini« and »multifix«

Bulkhead fitting G 3/4 o., G 1/2 i., AF1 30, AF2 32 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Screw-on hose connector, G 3/8 i., for hose I.D. 6 mm, AF 19, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Jaw coupling with IT, G 1/2, with brass seal, Malleable cast iron, galvanised / yellow passivated, Operating pressure max. 10 bar
Universal standard coupling for compressed air lines on construction sites or in industry; standard type according to DIN 3489, used worldwide in a very wide range of applications.

- Robust couplings made of malleable iron, zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- 100% couple test and secure connection