Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 2.5, Measurement range 0 - 6 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight screw-in fitting, M22x1,5 o., Pipe exterior Ø 18 mm, PN max. 315 bar, A/F1 32, A/F2 27, galvanised steel

Bracket 90, 90°, Rp 1/4 IT, Rp 1/4 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Spur gear made of stainless steel 1.4305 with hub module 1 80 teeth tooth width 10mm outside diameter 82mm
Material: Stainless steel 1.4305.

Milled teeth.
Tooth quality 8d25 DIN 3967.
Pressure angle 20°.


Article ID: 21499080

Product inlet/outlet size : #196 mm
SECF-B-2020-07E-N-F5m-W-B-B
SKU: SECF200538
Stock *: 0
Capacity: 3 to 7 m³/h
No of bars: 7 (3+4)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

K12C General features
Cable composition:– 2 conductors x 1.5 mm²– PVC sheath– Nickel-chromium heating element– Internal splicing point– Silicone insulation
Maximum room temperature powered 40 °C
Minimum installation room temperature -20 °C
Minimum storage room temperature -20 ÷ -25°C
Maximum length of the heating circuit  from the supply point 160 m
Electric features
Power supply 230V-50Hz
Constant power delivered ~10W/m

Ball knob DIN 319 Technopolymer PA6GV type C ø40 M12
Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319.

Article ID: 66474012

Worm gear unit G/II version A centre distance 31mm i=10:1 (For operating instructions please visit the download area of our website www.maedler.de)
Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N.

Article ID: 42001000

Stainless steel ball valve 1.4408, 3-piece, weld-on studs, Full passage, Operating temp. -20 °C to 150 °C, DN 39.7, PN max. 63 bar

Check valve, Inclined seat design, Brass, Medium / ambient temp. max. 80 °C, Rp 3/8, PN max. 10 bar, Opening pressure 0.5 bar

5/2-way valve, electropneumatic, »4V«, monostable, G 1/2, 24 V DC, Operating pressure 1.5 - 8 bar, Temp. -20 °C to 70 °C
5/2-way pilot valves
- Electro-pneumatic -

T-piece 130, IT/IT/IT, Rp 3, T-branch reducing Rp 2 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galva.
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Fitting 340, conical sealing, IT/IT, Rp/Rp 3/8, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Coupling nut, M14x1.5, Pipe exterior Ø 8 mm, PN max. 315 bar, Stainless steel 1.4571

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 40 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Double threaded nipple 280, ET/ET, R 1/4, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Adjusting ring DIN 705 A set screw with slot bore 42mm bright
Light-duty series. With set screw DIN EN 27 434 made from steel. From size d1=80mm with 2 allen screws like DIN EN ISO 4027, but strength 12.9, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC.
Article ID: 62304200

Round gear rack made of steel module 1 diameter 10mm h6 length 1000mm
Material:
Up to length 1,500mm: Steel St50K.
Length 2000mm = Steel C45k.
Outside diameter = h6 ground.

Straight teeth, milled.
Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967.

The teeth on the gear racks are manufactured using an overhead milling cutter.
This leads to negative tolerances. Dimensions ha and h0:
up to Module 2: -0,2 mm.
Module 2,5 - 4: -0,3 mm.
Module 5 - 6: -0,4 mm.


Article ID: 22463200

Product inlet/outlet size : #246 mm
SECF-B-2525-09E-N-F5m-W-B-B
SKU: SECF250538
Stock *: 0
Capacity: 8 to 20 m³/h
No of bars: 9 (4+5)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

O35 General features
Operating time 90 s / 15 mm.
Sound level max. 45 dB (A).
Position indicator: mechanical travel 5 ÷ 15 mm.
Protection class IEC / EN: II
Completely isolated.
Degree of protection IEC / EN IP54.
Operating mode Type 1.
Rated current supply voltage 4 kV.
Pollution degree control: 3.
Ambient temperature 0 ° C ÷ 50 ° C.
Storage temperature -40 ° C ÷ 80 ° C.
Ambient humidity 95% r.h., non-condensing.
Electric features
Rated voltage AC 230VRated voltage frequency 50/60 HzTolerance range AC 198 … 264VConnection with 4 mm² terminals and 1 m cable, 3 x 0.75 mm²

Worm gear unit G/II version A centre distance 31mm i=12:1 (For operating instructions please visit the download area of our website www.maedler.de)
Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N.

Article ID: 42001200

Round gear rack made of high strength steel module = 1 diameter = 10 mm h9 length = 1000 mm
Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm.
Article ID: 22466632

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 50, Stroke 1000, G 1/4, Working pressure 1.5-10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Fitting elbow 97, flat sealing, IT/ET, Rp 1 1/4, R 1 1/4, Operating temp. -20°C to 200°C, black malleable cast iron, Hot-dip galv.
Maximum temperature and maximum operating pressure should not occur at the same time!

Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/4, Hose Ø 8, NO, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.

T-piece 130, IT/IT/IT, Rp 3, T-branch reducing Rp 2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Straight screw-in fitting, G 1/2 o., Pipe exterior Ø 8 mm, PN bar 315, A/F1 17, A/F2 27, galvanised steel
Male connector, parallel male thread, light type

Double threaded nipple, Hexagonal, R 1/2, AF 22, Working pressure max. 20 bar, Stainless steel 1.4408

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 1.6 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Double threaded nipple 280, ET/ET, R 3/8, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 20mm
Material: Up to a Teeth Number of 72 phosphated steel, from a
Teeth Number of 80 phosphated grey cast iron GG25.

The functionability of a belt drive is largely influenced by the quality
of the used pulley. HTD pulleys are precision components, manufactured
pitch-true with special cutters. This leads to a precise meshing of
teeth.

Article ID: 17415600

Shaft collar DIN 705 A set screw with slot bore 9mm zinc plated
Light-duty series. With set screw DIN EN 27 434 made from steel, zinc-plated. From size d1=80mm with 2 allen screws like DIN EN ISO 4027, but strength 12.9, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC.
Article ID: 62388009

Product inlet/outlet size : #296 mm
SECF-B-3030-11E-N-F5m-W-B-B
SKU: SECF300538
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 11 (5+6)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

EV70D Telecontrol General features
Instrument customisable via PC for all parameters.
Extractable terminal block for fast replacement of the instrument.
2-line display for setting parameters, remote monitoring and management for both GSM modem ( mobile telephony) and PSTN modem ( fixed telephony)
Mounted on DIN rail ( 9 modules)
Electric features
Absorption 10VA
8 digital inputs ON- OFF
4 analog inputs, via detection probes
4 output relays
Contact rating 5A- 230Vac ( ohmic charge).

Worm gear unit G/II version A centre distance 31mm i=15:1 (For operating instructions please visit the download area of our website www.maedler.de)
Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N.

Article ID: 42001500

3/2-way valve, electropneum., monostable, G 1/2, NO, 24 V DC, Operating pre. 2.5 - 10 bar, Operating temp. -10 °C to 60 °C

Extension pipe 150 mm with standard nozzle

3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/4, Hose Ø 8, NC, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.

Male elbow, NPT 3/8 o., Pipe exterior Ø 10 mm, PN max. 630 bar, a/f1 22, a/f2 17, galvanised steel
Male elbow, NPT thread, heavy type

Push-in T-connector »Blue Series«, for hose exterior Ø 10 mm, Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Replacement filter element for inline-filter »filter plug«, R 1/4 and R 3/8

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 4 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Double threaded nipple, Conical, R 1/8 a., R 1/4 a., AF 14, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Adjusting ring DIN 705 A set screw with slot bore 48mm bright
Light-duty series. With set screw DIN EN 27 434 made from steel. From size d1=80mm with 2 allen screws like DIN EN ISO 4027, but strength 12.9, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC.
Article ID: 62304800

Turnbuckle similar DIN 1479 steel thread M8 length 35mm
Material: St37 DIN 1629, either untreated or zinc-plated.

M6 to M16 with overlapping thread, from M20 middle part relieved.
Some turnbuckle nuts are supplied with cross-holes, according to DIN 1479 as at 09/2005, which serve to check the minimum thread engagement.

*Threads: one side right-hand thread, other side left-hand thread.


Article ID: 65380800

Product inlet/outlet size : #346 mm
SECF-B-3535-13E-N-F5m-W-B-B
SKU: SECF350538
Stock *: 0
Capacity: 18 to 45 m³/h
No of bars: 13 (6+7)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

ZDEV General features
Voltage tolerance: -15% / +10%.
Environment temperature: -15°C / +60°C.
Closing time < 1 second.
Protection degree: IP54.
Cable gland: PG 9.
Pressure inlets: G1/4” on two sides (except models with brass body).
Gas type: Air and non-aggressive gases (EN 437).
Filter: 600 μm (except models with brass body).
Limit switch: by request from 3/4” to 4”.
Possibility to connect a pressure gauge to monitor gas pressure (except models with brass body).
Electric features
Rated voltage: 230Vac – 50/60Hz or 24Vac/dc
Upon request valves are available with coils for the following voltages:-110V AC 50/60Hz-24V AC/DC-12V AC/DC

Inner chain link type 4 / B for roller chain no. 03 pitch 5mm
According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.
Article ID: 10030100

Worm gear unit G/II version A centre distance 31mm i=18:1 (For operating instructions please visit the download area of our website www.maedler.de)
Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N.

Article ID: 42001800

Pillow block bearing unit BK 15 bore 15mm material steel black oxide finished
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings from Japan. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below.
Article ID: 64200115

3/2-way valve, electropneum., monostable, G 1/2, NC, 24 V DC, Operating pre. 2.5 - 10 bar, Operating temp. -10 °C to 60 °C

Nipple for couplings I.D. 7.2 - 7.8, Stainless steel 1.4305, G 1/8 IT, Operating pressure 0 - 35 bar, Temp. -15 °C to 200 °C

Round cylinder »MI«, double-acting, Magnet, Piston Ø 32, Stroke 25, G 1/8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Adjustable L screw conn., cone seal, 360° swivel range, female nut M30x2.0 i., Pipe ext. Ø 20, PN max. 400 bar, galvanised steel

Joint head, »UNIT« type, for cylinder series »MI« / »MSI«, for piston Ø 8-10, Piston rod thread M4x0.7, without lubrication nipple
Rod eye model, »UNIT« type

Push-in L-fitting »Blue Series« mini, rotating, M5, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 1 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Hexagonal counter nut, M20x1.5, AF 27, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Product inlet/outlet size : #120 mm
SECF-P-1212-05E-N-F1m-W-B-B
SKU: SECFP12030
Stock *: 0
Capacity: 2 to 6 m³/h
No of bars: 5 (2+3)
Weight: 8 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

ZD..NA General features
Voltage tolerance: -15% / +10%.
Environment temperature: -15°C / +60°C.
Working pressure: 500 mbar Max.
Closing time < 1 second.
Protection degree: IP54.
Cable gland: PG 9.
Pressure inlets: G1/4” on two sides (except models with brass body).
Limit switch: by request from 3/4” to 4”.
Gas type: Air and non-aggressive gases (EN 437).
Filter: 600 μm (except models with brass body).
Electric features
Rated voltage: 230Vac – 50/60Hz or 24Vac/dc
Upon request valves are available with coils for the following voltages:-110V AC 50/60Hz-24V AC/DC-12V AC/DC