Standard pressure gauge, triangle front ring, Connection, rear, centric, G 1/4, Goods class 2.5, Measurement range 0 - 4 bar, Ø 63
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 1, G 3/8, max. 16 bar, 0.5 - 10 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Hexagonal counter nut, M49x2, AF 60, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

T reducing supports, for hose I.D. 18/15/18 mm, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Ball valve standard design, full passage, IT/ET, nickel-plated brass, Operating temp. -15°C to 90°C, G 3/8, DN 10, PN max. 63 bar
Applications: Compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture.

2/3 Tube fitting, G 1/2 x 13 mm, swivel nut, taper seat, lightweight type, Brass with a bare metal surface

MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm sealed on both sides
Single row deep groove radial ball bearings Material:
Bearing steel. - Standard ball bearings in high quality. - Most common
bearing type. - Usable for high speed. - Insensitive in use and
maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or
with contacting rubber seals 2RS. Temperature range: -20°C to +90°C
(caused by type of lubrication), short-term up to 110°C. Other
versions or other bearing types on request.
Article ID: 629-2RS-MAE

Neodymium (NdFeB) 250 N
POTMAGNEET NDFEB 66X8.5 M6
SKU: GM1756301
Stock: 0
Size: Ø66 mm
Height (H): 8.5 mm
Attachment: M6
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

single direction thrust ball bearing 51101 inner Ø 12mm outer Ø 26mm height 9mm
Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request.

Article ID: 51101-MAE

Track for linear guide DA 0116 RC aluminium length 1800mm
Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes.
Article ID: 64990518

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 2.2 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-10 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Standard pressure gauge, triangle front ring, Connection, rear, centric, G 1/4, Goods class 2.5, Measurement range 0-250 bar, Ø 63
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 1, G 3/8, max. 16 bar, 0.5 - 6 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Pipe double nipple 23, ET/ET, galvanised steel ST 37-2, R 2 1/2, Length 100 mm, Working pressure max. 50 bar
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Replacement sieve for dirt strainers made of brass, for connection size G 1, mesh width 0.2 mm, DN 25

Pressure gauge fitting, G 1/2 i., Pipe exterior Ø 18 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

Straight screw-in fitting, R 1/8 o., Pipe exterior Ø 8 mm, PN bar 100, AF1 14, AF2 12, galvanised steel
Male connector, conical male thread acc. to ISO 7-1, very light type

Spur gear made of plastic PA12G with stainless steel core 1.4305 module 2 56 teeth tooth width 20mm outside diameter 116mm
Material: Outer part: Plastic PA 12 G. Steel core: Stainless
steel 1.4305. Milled, straight teeth.

Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short
periods 150°C.

Special plastic with excellent material properties.

Enables snugly fitting, high strength shaft-hub connection.

Optimal force transmission due to cylindrical contact area.

Light, silent and clean, with excellent dry running properties.

Article ID: 23195056

Round trapezoidal nut red brass Rg7 Tr.48 x 8 single-start right length 96mm outer diameter 90mm
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).

Tolerance zone 7H. Height = 2 x diameter.

Article ID: 64334800

Neodymium (NdFeB) 210 N
NDFE POT 66X8.5 DR GAT ZWART R
SKU: GM17563
Stock: 0
Height (H): 8.5 mm
Attachment: M6
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Protection cap for pillow bearings TUCP TUCF TUCFL 204 open design bore 20mm thermoplast black
Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer.
Article ID: 62555220

Slide set DZ 7957 slide length 304.8mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C.
Article ID: 64903912

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 0.4 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-16 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Measurement device holder according to DIN 16281, Extension 100, made of CrNi steel 1.4571
For mounting shut-off valves with a pressure gauge directly on the wall.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 1, G 3/8, max. 16 bar, 0.5 - 16 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Push-in L-fitting »Blue Series«, rotating, G 1/2 i., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Adjustable male connector, M18x1.5 o., Pipe exterior Ø 15, PN 315, a/f1 24, a/f2 27, galvanised steel

Straight reducer, Pipe exterior Ø Female connector 18/15 mm, PN max. 315 bar, a/f1 27, a/f2 32, a/f3 27, galvanised steel
Straight reducers, light type

End piece for pipe connection, »speedfit« series, for pipe exterior Ø 22 mm, POM

Spur gear made of plastic PA12G with stainless steel core 1.4305 module 2 60 teeth tooth width 20mm outside diameter 124mm
Material: Outer part: Plastic PA 12 G. Steel core: Stainless
steel 1.4305. Milled, straight teeth.

Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short
periods 150°C.

Special plastic with excellent material properties.

Enables snugly fitting, high strength shaft-hub connection.

Optimal force transmission due to cylindrical contact area.

Light, silent and clean, with excellent dry running properties.

Article ID: 23195060

Round trapezoidal nut red brass Rg7 Tr.48 x 8 single-start left length 96mm outer diameter 90mm
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).

Tolerance zone 7H. Height = 2 x diameter.

Article ID: 64384800

Neodymium (NdFeB) 100 N
GM17461
SKU: GM17461
Stock: 0
Size: 43 x 31 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Protection cap for pillow bearings TUCP TUCF TUCFL 208 closed design thermoplast black
Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer.
Article ID: 62555340

timing bar AT10 36 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16893600

slide rail DP 9301 E slide length 508mm
Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings.

Article ID: 64905720

Soft PVC workshop hose set, Safety coupling, Temperature max. 60 °C, Hose Ø 14.5x9, PN at 20 °C max. 12 bar, Length 20 m
Highly flexible hose for compressed air applications in workshop areas. Assembled with brass stem and brass quick disconnect coupling DN 7.2 optional with pushbutton safety coupling DN 7.4 and galvanised steel stem.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Service unit 3-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.5-8 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

GEKA angled hose piece, 360° rotating, bright brass, I.D. 13, Operating pressure max. 40 bar, Medium/ambient temp. -10 °C to 90 °C
Claw couplings (claw distance: 40 mm) made of brass for water, industrial, mortar, suction and discharge hoses. Suitable for a wide range of applications, e.g. industrial plant engineering, civil and structural engineering, environmental engineering, manual trades, domestic water engineering, horticulture and landscaping, agriculture and forestry, etc.
Available in a rigid or 360° swivelling version. The two systems can also be easily coupled to one another!

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 1, G 1/4, max. 16 bar, 0.5 - 10 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Push-in L-fitting »Blue Series« long, rotating, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Adjustable male connector, G 1/4 o., Pipe exterior Ø 8, PN 315, a/f1 19, a/f2 17, galvanised steel

Straight reducer, Pipe exterior Ø Female connector 22/18 mm, PN max. 160 bar, a/f1 32, a/f2 36, a/f3 32, galvanised steel
Straight reducers, light type

Straight screw-in fitting, ET conical, R 1/8, for hose 10/8 mm, AF 14, Working pressure max. 18 bar, nickel-plated brass

Spur gear made of plastic PA12G with stainless steel core 1.4305 module 2 64 teeth tooth width 20mm outside diameter 132mm
Material: Outer part: Plastic PA 12 G. Steel core: Stainless
steel 1.4305. Milled, straight teeth.

Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short
periods 150°C.

Special plastic with excellent material properties.

Enables snugly fitting, high strength shaft-hub connection.

Optimal force transmission due to cylindrical contact area.

Light, silent and clean, with excellent dry running properties.

Article ID: 23195064

Neodymium (NdFeB) 100 N
NDFEBPOT 43x31MM 1xDR.GAT
SKU: GM17460
Stock: 2
Size: 43 x 31 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Bush EP22 bore 10mm outer diameter 12mm length 15mm colour: white
Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more.

Article ID: 62721015

timing bar T10 28 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16492800

PVC braided hose set, Safety coupling, Operating temperature -15 °C to 60 °C, Hose Ø 15x9, PN at 20 °C max. 12 bar, Length 20 m
Flexible, pressure-resistant and non-abrasive standard hose. High safety standard through signal colours - fluorescent green. Assembled with pushbutton safety coupling DN 7.4. and stem galvanised steel.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Service unit 3-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-8 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Intermediate piece for measurement device holder for mounting pressure gauges, according to DIN 16281, G 1/2, made of brass
For mounting shut-off valves with a pressure gauge directly on the wall.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 1, G 1/4, max. 16 bar, 0.5 - 6 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Push-in L-fitting »Blue Series«, rotating, Rc 1/2 i., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Adjustable male connector, G 1/4 o., Pipe exterior Ø 12, PN 315, a/f1 19, a/f2 22, galvanised steel

Throttle check valve, Discharge throttle (»C«) push-in connector hose 8, G 1/4, PN max. 10 bar, Temperature 0 °C to 70 °C
For fine regulation of a cylinder piston speed and precise control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece.
Can be screwed directly onto the valve or cylinder.
Compact type of construction, also ideal where space is restricted.

Double threaded nipple, Conical, R 1 o., R 1 o., AF 41, Brass
As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

Spur gear made of plastic PA12G with stainless steel core 1.4305 module 2 70 teeth tooth width 20mm outside diameter 144mm
Material: Outer part: Plastic PA 12 G. Steel core: Stainless
steel 1.4305. Milled, straight teeth.

Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short
periods 150°C.

Special plastic with excellent material properties.

Enables snugly fitting, high strength shaft-hub connection.

Optimal force transmission due to cylindrical contact area.

Light, silent and clean, with excellent dry running properties.

Article ID: 23195070

Gear rack made of steel C45 black oxide finished module 1.5 tooth width 17mm height 17mm nominal length 2000mm
Material: Steel C45, black oxide finish. Milled teeth. Straight
tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for
continuous linking. * Length = Nominal length. The real length is
roughly one multiple of the pitch.

Article ID: 22811619

Neodymium (NdFeB) 100 N
NDFE POTø 43X6 DRGAT M4 RUBBER
SKU: GM17500
Stock: 26
Size: Ø43 mm
Height (H): 6 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.