Neoprene timing belt 88 MXL 012 110 teeth Lw 223.52mm belt width 3.2mm
Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC.
Article ID: 18164500

Tensioning element for front mounting size 4 1500 N
Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions.

Article ID: 14080407

timing bar AT5 52 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16695200

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 6.5 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with metal container, Viewing tube and pressure gauge, Size 1, G 3/8, Control range 0.1-2 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

3/2-way valve »Blue Series«, Plug connector, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Sealing ring made of copper, Temperature max. 250 °C, for thread G 3/8, PU 100 pcs.

Polycarbonate container, for mist oiler »G-mini«, Size 200, G 1/8 and G 1/4

T-holder individual, for »variobloc«, Size 1, G 1/4 and G 3/8

Push-in L-connector, Plug nipple 16 mm »Blue Series«, reducing, for hose exterior Ø 12 mm, Working pressure max. 15 bar, Plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Screw-on hose connector, G 3/8 i., for hose I.D. 12, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.

Suitable for air, water, oil, steam, etc.

Size : Ø32 mm
PLAFONDMAGN.R32 STAAL MET HAAK
SKU: GM14422
Stock: 4038
Holding force: 80 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Bush EP22 bore 8mm outer diameter 10mm length 15mm colour: white
Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more.

Article ID: 62720815

Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x G + C. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges.
Article ID: 61206000

Spur gear made of steel C45 with hub module 6 13 teeth tooth width 60mm outside diameter 90mm
Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.
Article ID: 23611013

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 7 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with metal container, Viewing tube and pressure gauge, Size 1, G 3/8, Control range 0.2-4 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

3/2-way valve »Blue Series«, Plug connector, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 8, Stroke 150, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Mounting bracket incl. 4 screws, for series »G-mini«

Push-in T-fitting »Blue Series«, rotating, M5 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Replacement sieve for dirt strainers made of stainless steel, for connection size 3/4

Screw-on hose connector, G 3/8 i., for hose I.D. 14, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.

Suitable for air, water, oil, steam, etc.

Size : Ø36 mm
PLAFONDMAGN.R36 STAAL MET HAAK
SKU: GM14423
Stock: 1766
Holding force: 100 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Bush EP22 bore 10mm outer diameter 12mm length 10mm colour: white
Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more.

Article ID: 62721010

Ball screw spindle rolled 32x10mm length 670mm
Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with Maedler® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Article ID: 64032101

V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 250mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement.

Article ID: 15212500

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 8 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with metal container, Viewing tube and pressure gauge, Size 1, G 3/8, Control range 0.5-8 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

3/2-way valve »Blue Series«, Plug connector, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 12, Stroke 25, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Trunnion mounting, »CA/CB« type for compact cylinder »ACP«, Piston Ø 20
Male hinge model, »CA« type / Female hinge model, »CB« type

Straight connector POM, for hose exterior Ø 10 mm, Working pressure max. 10 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

1/3 Tube fitting, G 1 1/2 x 38 mm, taper seat, without collar, lightweight type, Brass with a bare metal surface

Straight screw-in fitting, »value line«, G 1/4 o., for hose 10/8 mm, AF 16, Operating pressure max. 18 bar, nickel-plated brass
Straight connectors
Nickel-plated brass, »value line« Series

Size : Ø40 mm
PLAFONDMAGN.R40 STAAL MET HAAK
SKU: GM14424
Stock: 1240
Holding force: 110 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Bush EP22 bore 12mm outer diameter 14mm length 10mm colour: white
Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more.

Article ID: 62721210

Slide set DZ 5321 EC slide length 700mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm.

Article ID: 64903770

V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 180mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement.

Article ID: 15421800

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 9 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with metal container, Viewing tube and pressure gauge, Size 1, G 3/8, Control range 0.5-10 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Front or floor flange, for compact cylinder, Piston Ø 25, with 4 screws
Front or rear flange

Screw-in hose connector, R 2 o., for hose I.D. 50, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Fitting 341, conical sealing, IT/ET, Rp/R 1/4, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Replacement seal for stainless steel casting filter and stainless steel casting filter regulator, Size 1 and Size 3

Flat suction cup, round, Material NBR, »PFG«, ø:80 suitable connection nipple IT/ET M10x1.25 / G 1/4
Robust and hard-wearing suction pad with a single sealing lip.
Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to handle smooth or slightly rough surfaces. Due to its flat shape, it can grip the workpiece in a very short time and withstand the forces that result from fast movement of the object during handling. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very short evacuation timesSuitable for high lateral forcesGood intrinsic stability when attached to the loadSupports on the bottomVery short cycle timesHigh suction forces with small dimensions

Applications:
Handling workpieces with smooth or slightly rough surfaces, e.g. metal sheets,
cardboard boxes, sheets of glass, plastic parts and sheets of wood.

Straight screw-in fitting, »value line«, G 3/8 o., for hose 8/6 mm, AF 19, Operating pressure max. 18 bar, nickel-plated brass
Straight connectors
Nickel-plated brass, »value line« Series

Size : Ø47 mm
PLAFONDMAGN.R47 STAAL MET HAAK
SKU: GM14425
Stock: 2788
Holding force: 180 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Flange bush EP22 bore 8mm outer diameter 10mm flange diameter 15mm length 10mm colour: white
Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more.

Article ID: 62730810

Worm wheel made of cast iron GG25 module 3 40 teeth single-thread right hand
Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking.
Article ID: 31001800

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 10.5 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »FUTURA« with metal container, Viewing tube and pressure gauge, Size 1, G 3/8, Control range 0.5-16 bar, Fully
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Reducer, Pipe exterior Ø Female connector 25/20 mm, PN max. 400 bar, a/f1 32, a/f2 36, a/f3 46, galvanised steel
Reducer, heavy type

Push-in L-fitting, rotating, R 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Flange fastening, »FA« type for standard cylinder »SE« and »SAI«, for piston Ø 40
Flange model, »FA« type

Screw-in fitting for PVC pneumatic hose 10x12.5, Aluminium, Temperature -10 °C to 70 °C, PN -0,95 - 15 bar, G 3/8

Push-in L-fitting »Blue Series«, Self-locking, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Screw-on hose connector, G 1/8 i., for hose I.D. 4, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Locking assembly COM-LLH bore 90mm size 90x130x78mm
Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Very good distribution of pressureHigh resistant against bending forces.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=600mm for 977,000Nm are available.Price and delivery time on request.

Article ID: 61558090

Size : Ø50 mm
PLAFONDMAGN.R50 STAAL MET HAAK
SKU: GM14426
Stock: 3007
Holding force: 200 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.