Lubricant, for mounting cutting ring fittings with steel and stainless steel pipes, Can 250 g, Silicone free, Food-safe
For assembling bite-type tube fittings with steel or stainless steel pipes.

Significantly reduced torques.
No thread seizure: cold welding of stainless steel threads is ruled out.
Silicone-free, food grade.

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0-1 bar/14.5 psi, Ø63
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Worm thread - hose clamp »blow line«, Stainless steel (W 5) 1.4401, Belt width 12.0 mm, Clamping range 90.0 - 110.0 mm

Air gun without nozzle, nickel-plated die-cast aluminium, Temperature range -10 °C to 50 °C, G 1/4, PN max. 10 bar, G 1/4 IT
Standard type without nozzle!

In combination with the safety nozzles described below, this blow gun meets a wide range of safety requirements.
For blowing out and cleaning machines, workpieces, bore holes, hollow parts, etc.

Locking screw, Hexagonal socket, without flange, G 1/2, AF 10, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Locknut DIN 1804 type W M16x1.5 black finishing
Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots.
Article ID: 65261600

Ferrite 30 N
PM-TB-F-SG-D20x6x13xM3
SKU: GM16504
Stock: 20
Diameter (D): 20 mm
Height (H): 6 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Bevel gear made of steel module 4 40 teeth i=2.5:1 milled
Material: up to module 2: 11SMnPb30. From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Article ID: 36186500

Double-strand sprocket ZRT 10 B-2 5/8x3/8" 27 teeth material steel for taper bush type 2012
Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 12677127

Straight push-in connector, reducing, for hose exterior Ø 16/12 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Short stroke cylinder, double-acting, Magnet, Piston Ø 80, Stroke 100, G 1/4, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
Suitable for installation in limited spaces.
Supplied with magnet.
Suitable for filtered compressed air, lubricated (ensure continuity) or unlubricated.

Unidirectional flow control valve »lineonline«, Flow one-sided, Thread - hose, G 3/8, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 12, Stroke 15, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0-2.5 bar/36 psi, Ø63
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Angled piece 90°, IT / ET, Rp 3/8, R 3/8, Operating pressure max. 20 bar, Operating temp. max. 175 °C, Stainless steel

Branch tee, Pipe exterior Ø 12 mm, PN max. 630 bar, a/f1 24, a/f2 17, galvanised steel
Branch tee, heavy type

Plug for bite-type tube fitting, Pipe exterior Ø 16 mm, PN max. 400 bar
Plug, heavy type

Locknut DIN 70852 M10x1
Material: Steel. Hardness class 17 H according to DIN 267-24.

These nuts are used for unsafed, quickly to loosen applications, or for
a safe connection with an additional lock plate DIN 70952 (for these
lockwashers, a keyway is required on the shaft thread).

Recommend tolerance for the shaft thread: 6g DIN ISO 965.

Article ID: 65350100

Ferrite 40 N
PM-TB-F-SG-D25x7x15xM4
SKU: GM16505
Stock: 89
Diameter (D): 25 mm
Height (H): 7 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 224mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley.

Article ID: 15432200

Slide set DZ 5321 EC slide length 400mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm.

Article ID: 64903740

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 0.45 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »variobloc«, Metal container incl. viewing tube and metal drip cap, Size 1, G 1/4, Input pressure max. 20 bar
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Unidirectional flow control valve »lineonline«, Flow one-sided, Hose - thread, G 3/8, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 12, Stroke 20, M5x0.8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0-10 bar/145 psi, Ø63
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

T-connection »value line«, for hose 10/8 mm, AF 11, Operating pressure max. 18 bar, nickel-plated brass
Union tees
Nickel-plated brass, »value line« Series

Branch tee, Pipe exterior Ø 20 mm, PN max. 400 bar, a/f1 36, a/f2 27, galvanised steel
Branch tee, heavy type

Double threaded nipple, Cyl., G 3/8 o., G 3/8 o., AF 19, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Locknut DIN 70852 M12x1,5
Material: Steel. Hardness class 17 H according to DIN 267-24.

These nuts are used for unsafed, quickly to loosen applications, or for
a safe connection with an additional lock plate DIN 70952 (for these
lockwashers, a keyway is required on the shaft thread).

Recommend tolerance for the shaft thread: 6g DIN ISO 965.

Article ID: 65350200

Ferrite 80 N
PM-TB-F-SG-D32x7x15xM4
SKU: GM16506
Stock: 163
Diameter (D): 32 mm
Height (H): 7 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Rod end GAW DIN 12240-4 series E external thread M45x3 right maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63465000

timing bar HTD 5M 45 teeth length 200mm material aluminium
Material: Aluminium 6082-T6, UNI 9006.

Article ID: 17294500

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 0.8 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Service unit 3-part »variobloc«, Metal container incl. viewing tube and metal drip cap, Size 1, G 3/8, Input pressure max. 20 bar
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Bushing with exterior hexagonal, G 1 1/4, AF 50, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Metal container incl. viewing tube, for »FUTURA«, Size 1, G 1/4 and G 3/8, Condensate drain: Semi-automatic

Standard press. gauge »pressure line« Connection radial bottom, G 1/4, Goods class 1.6, Measurement range -1/0 bar/-14.5 psi, Ø63
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Closing cap (hexagonal design), G 1, AF 36, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Pressure gauge fitting, G 1/4 i., Pipe exterior Ø 4 mm, PN max. 100 bar, a/f1 10, a/f2 19, galvanised steel
Pressure gauge fitting, parallel female thread, very light type

Pipe double nipple 23, ET/ET, galvanised steel ST 37-2, R 3/8, Length 40 mm, Working pressure max. 50 bar
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Locknut DIN 70852 M14x1,5
Material: Steel. Hardness class 17 H according to DIN 267-24.

These nuts are used for unsafed, quickly to loosen applications, or for
a safe connection with an additional lock plate DIN 70952 (for these
lockwashers, a keyway is required on the shaft thread).

Recommend tolerance for the shaft thread: 6g DIN ISO 965.

Article ID: 65350300

Ferrite 125 N
PM-TB-F-SG-D40x8x18xM5
SKU: GM16507
Stock: 20
Diameter (D): 40 mm
Height (H): 8 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Rod end GAW DIN 12240-4 series E external thread M45x3 left maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63485000

Plate wheel KRL without hub pitch 8mm 114 teeth material steel
Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table.
Article ID: 10098800

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 2.4 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Filter for high pressures up to 60 bar, with manual bleeder valve, 40 µm, G 1/2, Brass container, Operating temp. 0 °C to 90 °C
Centrifugal separator with a sintered filter element.

Polycarbonate container incl. protective cage, for mist oiler »FUTURA«, Size 2, G 3/8 and G 1/2

Long reducer, Soft sealing, G 1 o., G 1 1/2 i., PN max. 315 bar, AF1 60, galvanised steel
Reducing adapters, galvanised steel acc. DIN 2353

Standard pressure gauge »pressure line« Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0-1.6 bar/23 psi, Ø 63
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Reduction, Pipe exterior Ø Bushing 15/12 mm, PN max. 315 bar, AF1 19, AF2 22, AF3 AF 27, galvanised steel
Reducer, light type

Reducer, Pipe exterior Ø Female connector 18/10 mm, PN max. 315 bar, a/f1 19, a/f2 19, a/f3 32, galvanised steel
Reducer, light type

Head nut for cover / floor, for round cylinder ISO 6432, Piston Ø 20 - 25, M22x1.5, Cylinder is delivered without nut
Head nut for cover / base

Locknut DIN 70852 M16x1,5
Material: Steel. Hardness class 17 H according to DIN 267-24.

These nuts are used for unsafed, quickly to loosen applications, or for
a safe connection with an additional lock plate DIN 70952 (for these
lockwashers, a keyway is required on the shaft thread).

Recommend tolerance for the shaft thread: 6g DIN ISO 965.

Article ID: 65350400

Ferrite 220 N
PM-TB-F-SG-D50x10x22xM6
SKU: GM16508
Stock: 30
Diameter (D): 50 mm
Height (H): 10 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Spur gear made of steel C45 with hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm
Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.#
Article ID: 21812000

Timing belt pulley T10 material aluminium 84 teeth for belt width 16 mm 31 T10/84-0
Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel.
Article ID: 16428400

Safety valve, High performance design, Brass, Operating temp. -40 °C to 200 °C, G 1/2, AF 27, Trigger pressure 4.1 bar
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Stainless steel ball valve, 2-piece, length acc. to DIN 3202-M3, G 2, DN 50, Operating temp. -20 °C to 180 °C, PN max. 63 bar