ODA02 General features
ODA02 can be configured to use a relay output on the bus to interrupt the phase of the illuminating body when thebrightness level is lower than the cut-off threshold.
It is suitable for installation in control panels or false-ceilings.

Tandem linear bearing unit KGT-3-O ISO series 3 Economy-Line with linear ball bearings with angular compensation with seals for shaft Ø 20mm open design
Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Article ID: 64682003

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 10 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Check valve »lineonline«, Hose (inlet) - thread (outlet), G 3/8, for hose Ø 8 mm, Operating pressure 0.5 to 12 bar
These valves ensure that compressed air only flows in one
(i.e. the desired) direction. The valve closes when inlet pressure is lost and maintains the working pressure that is present downstream.

Double threaded nipple, G 2 1/2 o., G 3 o., AF 95, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Double threaded nipple, R 1 o., R 2 o., AF 62, nickel-plated brass, Max. working pressure 25 bar, Max. operating temperature 150°C
Suitable for air, water, oil, steam, etc.

Angled fitting, Pipe exterior Ø 8 mm, PN bar 100, AF1 14, AF2 12, galvanised steel
Union elbow, very light type

Extension piece, short, R 3/2 o., G 1/8 i., AF 24, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Sintered bronze silencer, Slot, G 3/4, Operating pressure max. 10 bar, Operating temperature -10 °C to 250 °C
For reducing the exhaust noise generated by pneumatic equipment.

Flange fastening, »FA« type for round cylinder »MI« and »MSI«, for piston Ø 8-10
Flange model, »FA« type

Two-piece clamp coupling MAT both sides bore 14mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. The torques in the table are maximum values which can only be
achieved with perfect mounting and dimensional accuracy of the shaft.

Article ID: 60099814

Shaft collar DIN 705 A set screw with slot bore 7mm zinc plated
Light-duty series. With set screw DIN EN 27 434 made from steel, zinc-plated. From size d1=80mm with 2 allen screws like DIN EN ISO 4027, but strength 12.9, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC.
Article ID: 62388007

High performance V-belt XPA EPDM datum length 1457 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291457

Frequency:50 Hz
Speed:2975 1/min
Shaft Output:44308 W
Volume Flow:8925 m³/h
Pressure:Δp s13505 Pa
Pressure:Δp t14489 Pa
Density:43862 kg/m³
Sound Pressure:103 dB(A)

B12AN – B12BN General features
Sensitive element with stainless steel membrane, laser welded.
Metallic frame.
Cover in shockproof thermoplastic material.
Output connections with PVC cable gland.
Female connection G 1/4 (17 mm key).
Maximum temperature of the controlled fluid: 120 °C.
Pressure switch body admissible temperature: -35 ÷ 60°C.
Storage and transport temperature: -35 ÷ 60°C.
Unit weight: 0.43 Kg B12AN.
Unit weight: 0.44 Kg B12BN.
Electric features
G1/2 cable gland in V0 self-extinguishing, shockproof thermoplastic material, code: 303298LA
IP44 protection casing IP44, code: 2593367

Linear bearing unit KG-3-O ISO series 3 Economy-Line with self-aligning linear ball bearing with seals for shaft Ø 25mm open design
Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Article ID: 64672503

Precision spur gear made of steel 16MnCr5 module 1.5 36 teeth bore 12mm hardened and ground outside diameter 57mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22883600

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 40 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Distributor with 2 quick-connect couplings I.D. 7.2, »R26EMS«, Bright brass, G 1/4 ET, Operating pressure 0 - 35 bar
2-way distributor pieces made of brass with a bare metal surface, pre-assembled with quick disconnect coupling DN 7.2.
Available with threaded connection inside or outside.

Bushing - locking pusher, Stainless steel 1.4401/1.4408, Medium / ambient temperature max. 160 °C, G 1/2, DN 15, PN max. 14 bar

Bi-metallic thermometer, High quality design, Connection rear, for protective pipe L1=160 mm/L2=140 mm, Display range 0°C to 120°C
Applications: Extremely versatile design for use in machine, vessel, pipeline and plant construction as well as for heating systems.

A thermowell (removable with locking screw) is required.

Angled screw-in fitting, R 1/4 o., Pipe exterior Ø 10 mm, PN max. 315 bar, AF1 19, AF2 14, galvanised steel
Male elbow, conical male thread acc. to ISO 7-1, light type

Screw-in hose connector, M14x1,5 o., for hose I.D. 13 nickel-plated brass Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Nipple for couplings I.D. 7.2-7.8, nickel-plated brass, G 1/4 ET, rotating, Operating pressure 0-35 bar, Temp. 0 °C to 70 °C

Cover panel for base plate, for valves connection G 1/8, G 1/4
Aluminium alloy manifold bases 6061-T6 for 2 to 8 valve positions.

Ready-to-install flange nut Tr.40 x 7 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477440

High performance V-belt XPA EPDM datum length 1482 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291482

Rubber pad for collars type B1 with bore 16mm
Material: Rubber NBR, black, 70º +/-5º Shore A.

These oil-resistant rubber pads can be cliped into the axial bores of
the Maedler® shaft collars type B1. The rubber pads enable a careful and
vibration-damping clamping of a machine component on a shaft. For
mounting, the pins should be lubricated with oil or grease. At collars
from stainless steel, tire mounting paste or alternatively hand
dishwashing detergent can also be used.

Article ID: 62311699

Frequency:50 Hz
Speed:2960 1/min
Shaft Output:26928 W
Volume Flow:5308 m³/h
Pressure:Δp s13671 Pa
Pressure:Δp t14491 Pa
Density:43862 kg/m³
Sound Pressure:105 dB(A)

Length : 300 mm
SVM-N-114x34-0300-B-F1M
SKU: SVMN060300
Stock *: 0
Advised max. installation height: 65-80 mm
Height: 34 mm
Powerful and compact. For dry or wet use. Often used in the recycling industry or for protection of grinding mills.

Max. installation height 180 mm
Low overall height
Completely stainless steel and watertight
For recycling or metal separation

Application

Application

Plate magnets / magnetic plates are cost-effective, robust magnets. They are suitable for filtering metal parts from free-fall product flows or products on a conveyor belt with relatively little Fe contamination. Permanent plate magnets can be easily built into existing installations. In this way they protect processing machines reliably and economically, which prevents downtime of production processes. The effectiveness of plate magnets varies from 70 to 90% iron depletion. If an even cleaner product is desired, several magnets or magnet systems can be used in succession.

Placement

Placement

Overbelt placement or installation in/against a free-fall line. For placement in a free-fall line Goudsmit also supplies mounting plates (see also chute magnets). This makes dust-proof mounting possible and makes them easy to clean.
 
For a width in excess of 300 mm a neodymium magnet is recommended for installation in a free-fall line. In such applications ferrite plate magnets are too heavy for manual cleaning. If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Design

Goudsmit builds plate magnets for mounting above production lines that feature 'flux control' to create a deeper holding field. These have extra magnets between the poles that cause the lines of flux to penetrate deeper into the product flow. A ridge prevents captured iron particles from being carried away again by the product flow.

Cleaning

Cleaning

Cleaning of the plate magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away from the magnet. The Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field. For quick cleaning, see also chute magnets.

Worm wheel made of bronze module 1 125 teeth single-thread right hand
Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking.

Article ID: 30063500

Quick-release shaft collar aluminium black anodized bore 42mm
Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated.

Article ID: 62366242

Service unit 3-part »FUTURA-mini«, Metal container, Compact pressure gauge, Size 0, G 1/4, Control range 0.1 - 4 bar, Fully-auto.
Three-piece service units with excellent flow rates in modern design.
Diaphragm pressure regulator with secondary ventilation.

Distributor with 2 quick-connect couplings I.D. 7.2, »R26EMS«, Bright brass, G 3/8 ET, Operating pressure 0 - 35 bar
2-way distributor pieces made of brass with a bare metal surface, pre-assembled with quick disconnect coupling DN 7.2.
Available with threaded connection inside or outside.

Storz adapter, Aluminium, Storz size 100, Tappet distance 115 mm, G 4 ET, Operating pressure max. 16 bar, Temp. -40 °C to 110 °C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

Blocking valve pressure gauge, Taps - rotating bushing, DIN 16271, B shape, stainless steel 1.4571, G 1/2, PN 400 bar, max. 200 °C
Used as shut-off or reducing elements for pressure gauges when measuring liquids, gases or steam.

Push-in T-connector, Plug nipple »Blue Series«, for hose and plug exterior Ø 10 mm, Working pressure max. 15 bar, plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series« mini, rotating, M7, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Hose sleeve, nickel-plated brass, rotating, G 1/4 ET, I.D. 6, Operating pre. 0 - 35 bar, Temp. 0°C to 70°C

Reducing piece 241, ET/IT, R 3/2 o., Rp 1/4 i., Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Chain connecting link type 11 / E for roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated packing unit 5 pieces
Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces.
Article ID: 10166003

Ready-to-install flange nut Tr.50 x 8 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477450

High performance V-belt XPA EPDM datum length 1500 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291500

Frequency:50 Hz
Speed:2982 1/min
Shaft Output:99805 W
Volume Flow:18412 m³/h
Pressure:Δp s15361 Pa
Pressure:Δp t16372 Pa
Density:43862 kg/m³
Sound Pressure:108 dB(A)

Intellicomfort CH141A-EC General features
The packaging includes:
Electric features
LCD display: graphic, 7-segment symbols and digits.
LED, back lighting (blue) display.
Possibility to visualize Celsius or Fahrenheit temperature values.
Temperature adjustment scale 2-40 °C, increase 0,1°C
Measurement scale/room T display -35 +60 °C
Pre-set  differential 0,25k
Minimum adjustment differential 0,1°C
Thermal gradient of reference 4K/h
Maximum room temperature T45

Round trapezoidal nut nylatron Tr.36 x 6 single-start left length 72mm outer diameter 75mm
Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter.

Article ID: 64393600

Service unit 3-part »FUTURA-mini«, Metal container, Compact pressure gauge, Size 0, G 1/4, Control range 0.5 - 8 bar, Fully-auto.
Three-piece service units with excellent flow rates in modern design.
Diaphragm pressure regulator with secondary ventilation.

Push-in T-fitting »metallica«, rotating, R 3/8 o., for hose exterior Ø 14 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Spiral hose, Fitting and kink protection spring, Polyamide, R 1/4, Hose Ø 6x4, PN at 23 °C max. 27 bar, Length 10 m
For safe and effective flow.
Thanks to their small coil diameter, they are compact, easy to handle and lightweight.

Replacement filter element for stainless steel filter and filter regulator, Size 1 (G 1/4, G 3/8) and Size 3 (G 1/2, G 3/4)

Throttle check valve »Blue Series«, Discharge throttle, R 1/4 o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series« mini, rotating, R 1/8, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Hose sleeve, nickel-plated brass, rotating, G 1/4 ET, I.D. 13, Operating pre. 0 - 35 bar, Temp. 0°C to 70°C

Bracket 90, 90°, IT/IT, Rp 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Spur gear made of polyacetal resin die-cast with hub module 0.7 19 teeth tooth width 6mm outside diameter 14.7mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28201900

Splined hub with flange DIN 14 KN 26X32 length 60mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64855700

Ready-to-install flange nut Tr.60 x 9 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477460

High performance V-belt XPA EPDM datum length 1507 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291507

Frequency:50 Hz
Speed:2975 1/min
Shaft Output:37487 W
Volume Flow:6979 m³/h
Pressure:Δp s14359 Pa
Pressure:Δp t15260 Pa
Density:43862 kg/m³
Sound Pressure:107 dB(A)

OMC5 General features
Case dimensions: 110x135x48mm
Clamp section: 2.5 mm²
Electric features
Power supply: 230Vac +/- 10% 50Hz
Output maximum current: 10A j 1 4A cosj 0.4
Contact work time: 2.5 min. where foreseen
Contact voltage: 5/6/7 230Vac 50Hz