High performance V-belt XPA EPDM datum length 1332 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291332

Frequency:50 Hz
Speed:2960 1/min
Shaft Output:30087 W
Volume Flow:9102 m³/h
Pressure:Δp s9074 Pa
Pressure:Δp t9699 Pa
Density:43862 kg/m³
Sound Pressure:101 dB(A)

Length : 500 mm
BAR-HT-23-500-25-2M6-NW-B
SKU: SBANA100020-500
Interface/connection dim's: Threaded hole M6 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

PKD General features
Kits composed of Sicurgas gas leak detectors P21 – P22 and safety solenoid valves normally open or normally closed.
Available for methane gas and LPG detection.
Electric features
Shockproof insulating material casing.
Internal visual and acoustic alarms.
Sicurgas has three warning lights: green LED – indicates that the detector works properly, yellow LED – indicates detector failure, red LED – indicates the gas presence in the environment (ALARM).
Semiconductor sensor for gas detection (can be replaced).
Sensor life time approximately 5 years from installation.
The used relay is sealed and filled with inert gas, which ensures in any case the absolute absence of sparks during switching phases.
Internal switch for choosing the functioning mode of the relay: stable or impulse.

Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M8x1mm right handed
Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65250800

Steel bellow coupling MCL long version MDmax 30Nm both sides bore 11mm overall length 73mm hub diameter 56mm
Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page.
Article ID: 60165611

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 1 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Throttle check valve »Blue Series«, Supply air throttle, G 1/2 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

3/2-way solenoid valve »lineonline« silenced venting, Hose - thread, G 1/8, Hose Ø 6, NC, 24 V DC, Operating pressure 2.5 - 7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.

Throttle valve, Both sides throttling (»B«) threaded connection, G 1/2 IT, G 1/2, PN max. 10 bar, Temperature 0 °C to 70 °C
For regulation of a cylinder piston speed at both ends and control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece for mounting directly.
On the version with a knurled screw, the set volumetric flow rate can be locked with the hexagon nut to obtain a fixed setting.

Hollow screw, Two times, G 3/8, Working pressure max. 16 bar, Operating temperature -20 °C to 70 °C, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Double threaded nipple, reducing, Hexagonal, G 3/8 o., G 1/8 o., AF 20, Working pressure max. 20 bar, Stainless steel 1.4408

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range -1 / +5 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Bushing »value line«, G 1/4, AF 17, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass
For air, water, steam, oil, etc.

Ready-to-install flange nut Tr.50 x 8 single-start right material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477150

High performance V-belt XPA EPDM datum length 1357 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291357

Locking assembly COM-B stainless steel 1.4401 bore 35mm size 35-47
Material: Stainless steel 1.4401 (SS316).

Self-centering clamping bush for small hub diametres. For low torques.
Self-locking. No axial movement during mounting.
Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping
set before mounting, do not use molibdenum disulphide or grease. Tighten
the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange, until the flange is
released.

Article ID: 61599635

Frequency:50 Hz
Speed:2960 1/min
Shaft Output:35284 W
Volume Flow:9511 m³/h
Pressure:Δp s8552 Pa
Pressure:Δp t9243 Pa
Density:43862 kg/m³
Sound Pressure:95 dB(A)

Length : 500 mm
BAR-HT-23-500-25-2M8-NW-B
SKU: SBANA100040-500
Interface/connection dim's: Threaded hole M8 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Intellicomfort CH180WIFI General features
WiFi connection 2.4 GHz (802.11 b/g/n)
Router communication port 1080
Maximum radio frequency power transmitted <10mW
Temperature regulation scale 2 ÷ 40 °C, increment 0.1°C
Measurement scale/room T display – 50 ÷ + 50 °C
Differential 0,3 ÷ 5 K
Thermal gradient 4 K/h
Maximum room temperature 45°C
Managements: Heating and cooling, Summer time / Standard time, Remote change over (only with APP), Summer / Winter
Viewing of energy consumption
Storage temperature -10°C ÷ +60°C
Protection degree IP40
Pollution degree 2
Display Italian, English, French, Spanish, German, Russian
Screen lock With password
Electric features
Power supply 230V-50Hz
Maximum absorbed power 5 W
Contacts rating 5(3)A 250 Vac
Type of action 1 B.U. (connection micro-switch)
Output type: 1 relay for heating and cooling systems, (3 screw clamps (closed + open)
Software Class A
Electric insulation Double insulation
Pulse voltage 4000V

Flat knurled nut DIN 467 M5
Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN.
Article ID: 65374500

Internal gear made of steel C45 module 1.5 60 teeth tooth width 15mm outside diameter 120mm
Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle.

Article ID: 22846000

Steel bellow coupling MCL long version MDmax 30Nm both sides bore 14mm overall length 73mm hub diameter 56mm
Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page.
Article ID: 60165614

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 1.6 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Throttle check valve »Blue Series«, Discharge throttle, G 1/2 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Round cylinder, ISO 6432, double-acting, Magnet, Piston Ø 25, Stroke 200, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
Single and double-acting cylinders, with magnetic piston.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Pressure gauge- screw connection, G 1/2 i., Pipe exterior Ø 10 mm, PN max. 630 bar, Stainless steel 1.4571

Blocking set incl. 2 screws and O-ring, for »FUTURA«, Size 4, G 3/4 and G 1

Double threaded nipple, reducing, Hexagonal, G 3/8 o., G 1/4 o., AF 20, Working pressure max. 20 bar, Stainless steel 1.4408

Kamlok quick-connect socket, Hose supports, C type, Aluminium, Hose I.D. 32, for plug Ø 45 mm, Operating pressure max. 16 bar
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Pipe double nipple 23, ET/ET, Black steel, R 1/2, Length 120.0 mm, Max. working pressure 50 bar, DIN EN 10241
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Ready-to-install flange nut Tr.60 x 9 single-start right material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477160

High performance V-belt XPA EPDM datum length 1360 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291360

Frequency:50 Hz
Speed:2970 1/min
Shaft Output:34724 W
Volume Flow:9752 m³/h
Pressure:Δp s9754 Pa
Pressure:Δp t10472 Pa
Density:43862 kg/m³
Sound Pressure:102 dB(A)

PKD General features
Kits composed of Sicurgas gas leak detectors P21 – P22 and safety solenoid valves normally open or normally closed.
Available for methane gas and LPG detection.
Electric features
Shockproof insulating material casing.
Internal visual and acoustic alarms.
Sicurgas has three warning lights: green LED – indicates that the detector works properly, yellow LED – indicates detector failure, red LED – indicates the gas presence in the environment (ALARM).
Semiconductor sensor for gas detection (can be replaced).
Sensor life time approximately 5 years from installation.
The used relay is sealed and filled with inert gas, which ensures in any case the absolute absence of sparks during switching phases.
Internal switch for choosing the functioning mode of the relay: stable or impulse.

Ball knob DIN 319 press on type ø32 for shaft diameter 8mm
Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery.

Article ID: 66433208

Carriage with stainless steel balls for linear guide DA 0116 RC
Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes.
Article ID: 64990501

Steel bellow coupling MCL long version MDmax 30Nm both sides bore 19mm overall length 73mm hub diameter 56mm
Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page.
Article ID: 60165619

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 2.5 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Reducing nipple short, G 1 1/2 o., G 3/4 i., AF 55, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Metal container, O-ring, fully autom. bleeder valve, for filter/filter regulator »multifix-mini«, »FUTURA-mini«, »Standard-mini«

Locking screw, Exterior hexagonal , flange G 1 Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Mini ball valve, Smooth surface, nickel-plated brass, Medium temp.-10°C to 70°C (short term 90°C), G1/8 IT/ET, DN8, PN max.10 bar

Angled piece 45°, interior / interior, Rp 1/8, Operating pressure max. 20 bar, Operating temp. max. 175 °C, Stainless steel

Kamlok quick-connect plug with interior thread, A type, Aluminium, G 2 1/2, Plug Ø 76 mm, Pressure max. 16 bar, Temp. max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Flat seal, (NBR with aramid fibres), for connection size (inch) 1/2, Operating temperature -20 °C to 200 °C
Maximum temperature and maximum operating pressure should not occur at the same time!

High performance V-belt XPA EPDM datum length 1382 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291382

Frequency:50 Hz
Speed:2955 1/min
Shaft Output:24815 W
Volume Flow:5921 m³/h
Pressure:Δp s10205 Pa
Pressure:Δp t10865 Pa
Density:43862 kg/m³
Sound Pressure:116 dB(A)

Length : 400 mm
SVM-F-204x92-0400-B-F0E
SKU: SVMF040400
Stock: 1
Advised max. installation height: 70-110 mm
Height: 92 mm
Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream equipment.

Max. installation height 140 mm
Low overall height
With neodymium or ferrite magnets
For recycling or metal separation

Application

Application

Ferrite magnetic plates (plate magnets) remove ferromagnetic (Fe) particles as small as 0.5 mm. An advantage is that they are suitable for use at higher temperatures (250°C), but they are not suitable for capturing stainless steel scrapings.
 
The dimensions are selected based on the desired holding field depth: the deeper the field, the heavier and larger the magnet becomes. For this reason one often opts for the more compact and equally strong neodymium (Neoflux®) plate magnets.

Placement

Placement

Overbelt placement or installation in/against a free-fall line. For placement in a free-fall line Goudsmit also supplies mounting plates (see also chute magnets). This makes dust-proof mounting possible and makes them easy to clean.
 
For a width in excess of 300 mm a neodymium magnet is recommended for installation in a free-fall line. In such applications ferrite plate magnets are too heavy for manual cleaning. If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Design

Goudsmit builds plate magnets for mounting above production lines that feature 'flux control' to create a deeper holding field. These have extra magnets between the poles that cause the lines of flux to penetrate deeper into the product flow. A ridge prevents captured iron particles from being carried away again by the product flow.


Cleaning

Cleaning

Cleaning of the plate magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away from the magnet. The Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field. For quick cleaning, see also chute magnets.

K10CKIT General features
Cable composition: thermoplastic material with a mechanical protection and earth braiding and an external protective sheath
Cable diameter 9 mm
Cable length:– K10C3KIT 3 m– K10C6KIT 6 m– K10C9KIT 9 m– K10C14KIT 14 m
Maximum room temperature powered 65 ° C
Minimum installation room temperature -5 °C
Thermostat temperature scale ON +5°C / OFF +15°C
Minimum storage room temperature -20 ÷ -25°C
Protection rating IPX7
Electric features
Power supply 230V-50Hz
Constant power delivered ~10W/m

Ball knob DIN 319 press on type ø32 for shaft diameter 10mm
Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery.

Article ID: 66433210

Precision double universal joint WDR DIN 808 bore 18H7 stainless steel 1.4301 total length 134mm outer diameter 32mm
Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199737

Steel bellow coupling MCL long version MDmax 30Nm both sides bore 24mm overall length 73mm hub diameter 56mm
Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page.
Article ID: 60165624

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 0.6 bar, Ø 160
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Ball valve long thread design, IT/ET, nickel-plated brass, Operating temperature -15 °C to 90 °C, Rp/R 1/2, DN 15, PN max. 40 bar
Applications: Compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture.

Plastic container, for fine filter »Bavaria« for potable water, without DVGW, R 1 1/2 and R 2

Sensor for the T-slot, for all cylinders except short stroke cylinders, HALL sensor, 3-wire, with 2.5 m cable
DSL reed sensor

Mini ball valve, Smooth surface, nickel-plated brass, Medium temp.-10 °C to 70 °C (short term 90 °C), G 1/8 IT, DN8, PN max.10 bar

Thread plug nipple »click-clock«, G 1/2 o., for hose exterior Ø 14 mm, Working pressure max. 16 bar, nickel-plated brass
By combining these parts with unions, union elbows and union tees, you can obtain all essential connecting variants and simultaneously reduce your warehousing costs.

3/3 Tube fitting, G 1 1/4 x 25 mm, swivel nut, taper seat, with NBR O-ring, lightweight type, Brass with a bare metal surface