Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 40, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, NPN
Sensors, »CS1« type

Socket, reduced, G 3/8 i., G 1/2 i., AF 24, nickel-plated brass, Max. working pressure 25 bar, Max. operating temperature 150 °C
Suitable for air, water, oil, steam, etc.

Bellows suction cup, Round 2.5 folds, Material NBR, »FG«, suitable connection nipple IT M5, ET M5, Ø5mm
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Soft, flexible foldsSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Closing cap, round, G 1 1/2, Diameter 55 mm, Working pressure max. 20 bar, Stainless steel 1.4408

2-ear hose clamp, Stainless steel 1.4301 (W4), Clamping range 13.0 - 15.0 mm, Belt width 6.0 mm

Lockwasher DIN 5406 MB6 zinc plated inner diameter 30mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65364881

Swivel joints

Frequency:50 Hz
Speed:2750 1/min
Shaft Output:26 W
Volume Flow:132 m³/h
Pressure:Δp s329 Pa
Pressure:Δp t414 Pa
Density:43862 kg/m³
Sound Pressure:0 dB(A)

With Filter Mat P15/350S And Gasket Weight:0,5

The U200 Gateway can interface with NMEA 2000® devices on a NMEA 2000 bus using a personal computer (PC). A simple plug-and-play installation allows GPS data, speed over ground (SOG), course over ground (COG), vessel heading, depth, speed, water temperature, weather data, and more to be displayed on your PC. Airmar’s WeatherCaster™ PC software comes standard with the U200 and acts as both a user interface to display the network data and also as a network analyzer tool. All NMEA 2000 network activity on the bus can be viewed and logged as needed.

Max. stack height : 360 mm
HSS-F-BA-114x047-0400-B
SKU: TBSP020400
Stock: 20
Width: 114 mm
Sheet separators with ferrite magnets are suitable for separating sheets in the most common situations.

Permanent magnetic
For sheets up to 4 mm thick
Max. stacking height 490 mm
Steel enclosure
Ferrite magnet

Operation

Ferrite sheet separator operation

The magnetic field automatically forces the sheets apart and separates them. When the upper sheet is removed, the next one rises immediately.
To prevent malfunctions in fully automated production processes we recommend the use of a number of extra sheet separators.

Installation example 1

Corner installation

For optimum results, it is best to place two sheet separators at the corner(s) of stacks of large steel sheets.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 2

Installation across from each other

Sheet separators placed across from each other ensure that the sheets begin to ‘float’.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 3

Single-piece installation

For small sheets, it is best to place the sheet separator in the middle of the shortest side.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 11 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C10..Y General features
Sensing element with stainless steel diaphragm.
Tinned copper spiral capillary.
Base, cover and knob in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with Gc 1/2 cable gland.
Unit weight: 0.16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 80, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Bulkhead fitting, G 1 o., G 3/4 i., AF1 38, AF2 41, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 32, Stroke 20, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 20, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, PNP
Sensors, »CS1« type

Reducing nipple, Long type G 1/2 o., G 3/8 i., AF 24 Nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Bellows suction cup, Round 2.5 folds, Material NBR, »FG«, suitable connection nipple IT G 1/8, ET M5 / G 1/8, Ø7mm
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Soft, flexible foldsSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Kamlok closing cap for quick-connect plug, DC type, Aluminium, Size 1 1/2, for plug Ø 53 mm, Pressure max. 16 bar, Temp. max. 68°C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Straight reducing supports, for hose I.D. 10/8 mm, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Two-piece clamp coupling MAT both sides bore 15mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in
the table are maximum values which can only be achieved with perfect
mounting and dimensional accuracy of the shaft.

Article ID: 60099915

Feather key DIN 6885 version A 3 x 3 x 15 mm material C45
Material: C45K.Version A.
Article ID: 61803500

Locking assembly BAR stainless steel 1.4401 bore 22mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.

70072-1.000 ENG 3-6 230V, 50Hz 1-
Phase Low-Pressure Fan:
Rotating Direction: clockwise
Rated Power: 90 watts
Protection Category: IP54
Insulation Class: F
Number of Poles: 2
Fan Wheel: sheet Steel (galvanized)
Fan Housing: sheet Steel
Varnishing: RAL9005 Deep Black
Weight: ca. 4 kg net.

V9BP-01 switching amplifier with auto-teach for miniature Opto sensors

Closing Cap Weight:0,5

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The 100WX offers a truly best-in-class solution at a better price than any other weather monitoring system on the market today.

Reliability and superior accuracy, along with no moving parts and plug and play installation, makes the 100WX an easy and affordable choice for any weather solution. The Airmar WX WeatherStation® instruments are unique, as they are the only weather monitoring system to offer true and apparent wind speed and direction in one compact housing—without the need for additional sensors. Ideal for stationary applications, the 100WX model offers apparent wind speed and direction, air temperature, and barometric pressure readings.

The many new benefits of the WX Series include:

Removable humidity sensor that is field serviceable
IPX6 waterproof rating (units with the relative humidity module are IPX4 waterproof rated)
New power supply featuring a 50% reduction in current draw for use in remote locations that use solar or battery power
Wider operating voltage range of 9-40 VDC
Adjustable, unfiltered wind data for monitoring maximum gust conditions
Output via a single cable (various lengths available) for power and either RS232 (NMEA 0183) or RS-422 standard (NMEA 0183) and CAN bus (NMEA 2000®) data interface
WeatherCaster™ PC software for viewing and customizing data sentences

Ferrite 300 mm
HRA-F-102x44-AA-0300-B-B
SKU: TBAA030004
Stock: 9
Width: 102 mm
Height: 44 mm
Water-resistant: no
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.


Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning


Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller


Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 12 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Z52 – Z53 – Z53PT General features
2/3 way / by-pass.
Nominal pressure 16 bar.
Differential pressure 16 bar.
Maximum pressure +100°C.

Bevel gearbox KEK size 5 ratio 1:1 shaft diameter 12mm housing length 53mm
Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.
Article ID: 41000105

Self-aligning open linear bearing KB-3-A ISO series 3 with seals for shaft Ø 30mm
Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Stainless version on request.
Article ID: 64613007

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 80, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Adjust. angled screw conn., 360° swivel range, cone seal, female nut M24x1.5 i., Pipe ext. Ø 16, PN max. 400 bar, galvanised steel

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 32, Stroke 20, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 25, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, PNP
Sensors, »CS1« type

Straight push-in bulkhead connector »Blue Series«, M12x1.0, for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Double threaded nipple, G 3/4 o., G 3/4 o., AF 32, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Nipple for couplings I.D. 5.5, ARO 210, hardened / galv. steel, G 3/8 ET, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Locking screw, Hexagonal socket 3 mm, G 1/8, NBR O-ring, nickel-plated brass, Max. working pressure 25 bar,Max.operating temp.80°C
Suitable for air, water, oil, steam, etc.

Retaining ring DIN 472 26mm
Material: Feather steel, phosphated, oiled. Internal rings for
axial fixing a machine part inside a bore.

Article ID: 61762600

52114-1.000 ENG 3-9,8 230V, 50Hz One-Phase Low-Pressure Fan
Rotating direction: clockwise
Rated power: 120 watts
Rated current: 0,90 amp.
Protection category: IP54
Insulation class: F
Number of poles: 2
Fan wheel: sheet Steel (galvanized)
Fan housing: sheet Steel
Intake grid: sheet Steel
Varnishing: RAL9005 deep black
Foot: R90
Terminal box position R0 Weight: 4.5 Kg

FINEspot® compact light scanner
Cuboid, rugged metal housing and M8 connector. The Fine spot optic with a partial light output ensures particularly precise object detection. The sensitivity can be adjusted via a potentiometer.
Type: 7 x 8 x 59 mm
Operating distance: 50 mm
Operating voltage: 10-30 V DC
Connection: M8 connector, 3-pole
Output: PNP

Stainless Steel Weight:0,5

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The LB150, Ultrasonic WeatherStation® Instrument meets a growing need for real-time, site-specific, weather information. It is the only ALL-in-ONE weather sensor that calculates apparent wind speed and direction, barometric pressure, air temperature, relative humidity, dew point, and wind chill temperature. With the internal compass and WAAS/EGNOS GPS, true wind speed and direction can also be calculated. Accurate data helps organizations make important decisions regarding weather conditions that affect safety and operations.

Traditional weather instrumentation is composed of several individual sensors including wind cups, which are prone to breaking and are less accurate at low speeds. Airmar’s WeatherStation® Instrument incorporates seven sensors, with no moving parts, all in one compact unit. The UV stabilized, housing is fully waterproof and resistant to chemicals.

The WeatherStation® Instrument comes with our intuitive WeatherCaster™ Software. Data can be viewed in both digital and analog formats and can be saved for a set period of time. The log time can be adjusted in intervals from 6 to 72 hours. Standard NMEA sentences and an RS-422 standard interface allows for the flexibility of designing your own software program to fit your specific application. Our comprehensive technical manual makes the job easy!

Airmar’s WeatherStation® Instrument has a standard 1-14” UNS (3/4” NPT) thread connection to accommodate standard mounting hardware. The waterproof base connector assures trouble-free installation and servicing, while a quick disconnect feature allows for easy removal. Using the standard cable lengths of 10 m or 15 m (33' or 49'), the sensor can be connected to the optional USB Converter. The Converter allows the WeatherStation® Instrument measurements to be displayed on a PC by changing the data from RS-422 standard or NMEA 0183 to USB.

Neodymium 100 mm
HRA-N-053x22-AA-0100-B-W
SKU: TGAA010041
Stock *: 0
Width: 53 mm
Height: 22 mm
Water-resistant: yes
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.


Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning


Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller


Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 12,5 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C48 General features
Adjustment knob for big diameter and large-scale.
Double insulation.
Test button to check the batteries charge.
The batteries are replaced through thermostat’s front.
Unit weight 0,13 Kg.
Electric features
Power supply with three 1,5V AAA alkaline long life batteries.
Electrical supply is not required.
Micro disconnection (1B).
Batteries operation life of approximately 4 years

Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 20mm hardened and ground outside diameter 54mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2.
Teeth, bores and faces ground.

Tooth quality 7 e25.
Pressure angle 20°.

Feather Keyways in accordance with DIN 6885/1, tolerance P9.
Position of keyway to tooth is not defined.

Article ID: 24182520

3/2-way valve man. 90° lever monostable, G1/2, Operating pressure max. vacuum 10 bar, Operating temp. -10 °C to 60 °C
These pilot valves are also suitable for max. vacuum 10 bar.

Adjustable 45° screw conn., cone seal, 360° swivel range, female nut M12x1.5 i., Pipe ext. Ø 6, PN max. 315 bar, galvanised steel

Spherical trunnion mounting, ISO 15552, for compact cylinder, Standard cylinder, Piston Ø 63, with 4 screws
Articulated male hinge model

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 40, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, PNP
Sensors, »CS1« type

Reducing piece POM, Supports 12 mm, for hose exterior Ø 8 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.