Straight push-in fitting »Blue Series« mini, round, R 1/8, for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Straight screw-on fitting G 1/2 i., for hose 4/6 mm, AF 27, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Check valve, Small design, nickel-plated brass, Medium / ambient temp. max. 70 °C, G 1/8, PN max. 10 bar, Opening pressure 0.2 bar

Ferrule, Pipe exterior Ø 16 mm, PN max. 400 bar, galvanised steel
Ferrule, heavy type

2/3 Tube fitting, G 3/4 x 16 mm, swivel nut, taper seat, lightweight type, Brass with a bare metal surface

Lockwasher DIN 5406 MB0 zinc plated inner diameter 10mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65363081

Frequency:50 Hz
Speed:2770 1/min
Shaft Output:20 W
Volume Flow:94 m³/h
Pressure:Δp s229 Pa
Pressure:Δp t307 Pa
Density:43862 kg/m³
Sound Pressure:57 dB(A)

Inductive sensor Ø 4 | flush mounting | Operating distance: 0.8 mm
Design: Ø 4 mm x 25 mm
Operating voltage: 10-30 V DC
Output: PNP,
Protection: IP67
Connection: 2 m PUR cable

Le-450-Sl, 230V Ac, 15W Weight:0,44

600 W

The P58 TRIDUCER® Multisensor is Airmar’s most affordable, dual-frequency, 50/200 kHz, transom-mount design. It combines depth, speed, and temperature functions in one housing. Few parts make installation simple, and its compact size is attractive to small-boat owners. Our square-blade paddlewheel has good linearity and is quite accurate throughout the speed range.

Ferrite Tapered-after roller - Weakening outfeed
HRA-F-077x24-BD-0335-B-B
SKU: TBBD033502
Stock *: 0
Width: 77 mm
Height: 24 mm
Length: 335 mm
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.


Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning


Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller


Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 6 Homologation VDE | IMQ Dimension D x H (mm) 30 x 57 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C61 General features
WINTER – OFF – SUMMER switch to control heating or air conditioning installations.
Manual switch for selecting one of the three fan-coil’s speeds.
It is possible to connect one thermostat to the terminals 4 and 6 (look the scheme on page 24), if this option is not used, the terminals are closing.
Pollution degree 2.
Red LED indicates system’s turning-on.
Unit weight 0,17 Kg
Double insulation
Electric features
Power supply 230V-50Hz.
Consumption 1VA.
Micro disconnection (1B).
Pulse voltage 4000V.

Precision spur gear made of steel 16MnCr5 module 1 60 teeth bore 12mm hardened and ground outside diameter 62mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22486000

Precision spur gear made of steel 16MnCr5 module 1.5 24 teeth bore 15mm hardened and ground outside diameter 39mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22882415

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 16 bar, Ø 100
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Kamlok quick-connect socket with exterior thread, B type, Stainless steel 1.4401, R 3/4, for plug Ø 32 mm, Pressure max. 16 bar
High-quality, robust, universal coupling system with a safety clamp for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok stainless steel couplings are designed for use with corrosive media in the chemical and petrochemical industries, steelmaking, shipbuilding, agriculture, etc.

All female threaded couplings and connectors are with female thread sealing ring made of PTFE.

Thread plug nipple, G 1/2 o. , Plug connenction Ø 12 mm, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 20, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, NPN
Sensors, »CS1« type

Straight push-in fitting »universal short«, 1/4, hose-Ø 8, taper seat, Working pressure -0,99 to 20 bar, nickel-plated brass
The quick-connect fittings of the »universal short« series are true to their name and are used for the quick and simple connection of hoses. The conical sealing threads off a high degree of flexibility, as it is compatible with both conical and cylindrical threads. Thus the quick-connect fitting can be combined with a wide variety of thread types (BSPP, BSPT, NPT, NPTF, PT, PF) of standards ISO 7.1 and ISO 228. Shorter assembly ties result from the reduced thread length. The smaller hole spacing, resulting from the reduction of the width across flats, enables installation in very tight spaces. This saves time and space.

The complete sealing is also guaranteed on uneven, for example inclined, concave or convex surfaces, and with differing radii and chamfers. The special geometry of the seal enables vacuum applications.

Suitable plastic pipes: PA11, PA12, polyethylene, polyurethane (for polyurethane a hardness of 98 shore is recommended), PTFE.

Areas of application: Pneumatic automation, automotive industry, textile and packaging industry, compressed air circuits, vacuum applications.

Pivoting angled fitting, G 1/4 o., Pipe exterior Ø 6 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

Push-in T-fitting »click-clock«, rotating, R 1/4 o., for hose exterior Ø 4 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 12.0 mm, Clamping range 40.0 - 60.0 mm

Straight screw-in fitting, NPT 1/4 o., Pipe exterior Ø 6 mm, PN max. 630 bar, A/F1 17, A/F2 17, galvanised steel, NPT threat
Male connector, male thread NPT, heavy type

Lockwasher DIN 5406 MB1 zinc plated inner diameter 12mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65363281

Frequency:50 Hz
Speed:2760 1/min
Shaft Output:20 W
Volume Flow:94 m³/h
Pressure:Δp s227 Pa
Pressure:Δp t305 Pa
Density:43862 kg/m³
Sound Pressure:57 dB(A

M120A-BM12CI-PS6K-S magnetic sensor in all-metal version with M12 connector

Operating distance: 120 mm magnet M 4.0
Operating voltage: 10-30 V DC
Switching frequency: 5000 Hz
Current: ≤ 200 mA
Current: ≤ 10 mA
Output: PNP,
Connection: M12 connector, 3-pole

Sf 35, 24V Ac/Dc, 30W, Weight:0,48

600 W

The P66, TRIDUCER® Multisensor transom-mount features our 50/200 kHz, dual-frequency, single, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for accurate high-speed readings and clear display images.

Door safety switch Inductive sensor - Normally open - Ex 2D
PROX SW M30x1,5 Ex II 2D Ex tD
SKU: EITA036055
Stock: 4
Power supply: 10...36 V DC - 40 mA
Sensors and switches are designed for the control, safety and automation of our magnet systems. They are easy to build into our systems. To ensure the safety of our products, the most important sensors are often already built in. This is to guard against, for example, vibration or overheating. Some sensors are optional, for example, for detecting different switching positions (on/off).

Quality and reliability
ATEX II 1/2 D possible
Easily integrated

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 6,3 Homologation VDE | IMQ Dimension D x H (mm) 30 x 57 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C03 General features
Sensing element with stainless steel diaphragm;
Copper bulb and capillary;
Cooper sheath with connection Gc 1/2 PN10;
Base, cover and knob in shock-proof self-extinguishing thermoplastic material V0;
Differential 6 ± 1 K (the differential is subtracted from the range value, the differential values refer to a thermal gradient of 6K/hour, 1K/min with heat-conducting paste bags);
Electrical connection output with PVC cable gland;
Storage and transport temperature: -35 ÷ 120°C.
Electric features
Two directions microswitch of instant action with AGcdO contacts;
Contact parameters in compliance with EN 60730-1: 15(6)A 250V~ 50Hz.

Clamp collar for splined hub DIN 14 KN 23x28 diameter 64mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05
Article ID: 64899603

Self-aligning linear bearing KB-3-A ISO series 3 with seals for shaft Ø 25mm
Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Stainless version on request.
Article ID: 64612506

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 25 bar, Ø 100
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Quick relief valve »lineonline«, with silencer, Hose - thread, G 1/4, for hose Ø 6 mm, Operating pressure 1 - 10 bar
Exhaust can be silenced by a stainless steel silencer or conveyed using a push-in fitting with an air exhaust device.

Bushing - blocking valve, Stainless steel 1.4401/1.4408, Medium / ambient temperature max. 160 °C, G 1/2, DN 15, PN max. 14 bar

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 25, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, NPN
Sensors, »CS1« type

Angled connector, for hose 4/2 mm, AF 9, Working pressure max. 18 bar, nickel-plated brass

Bulkhead fitting »value line«, M20x1, for hose exterior Ø 12 mm, Operating pressure max. 16 bar, nickel-plated brass
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.

Straight push-in connector »Blue Series«, Self-locking, for hose exterior Ø 12 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Worm thread hose clamp, Chrome steel 1.4016 (W2), according to DIN 3017, Clamping range 40.0 - 60.0 mm, Belt width 9.0 mm
Worm drive type.

For all standard applications where high clamping forces are normally distributed.

Hexagon-head screw a/f 7, with integrated cross-tip, bright galvanised steel, passivated blue.

Lockwasher DIN 5406 MB2 zinc plated inner diameter 15mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65363481

Frequency:50 Hz
Speed:2790 1/min
Shaft Output:23 W
Volume Flow:104 m³/h
Pressure:Δp s327 Pa
Pressure:Δp t423 Pa
Density:43862 kg/m³
Sound Pressure:62 dB(A

M120A-M12CI-N-S Magnetic sensor Namur in all-metal design with M12 connector

Sf 35, 400V Ac/Dc, 35W Weight:0,48

600 W

The B744VL is a TRIDUCER® Multisensor featuring depth, speed, and temperature in a single housing. The 50/200 kHz, dual-frequency, single, ceramic element provides great target detail in shallow water at 200 kHz and good deep-water bottom tracking at 50 kHz. The B744VL’s extended stem-length has the extra height needed for steep-deadrise vessels or thick, cored-fiberglass or wood hulls.

Length : 150 mm
BAR-HT-23-150-25-1M6-NW-B
SKU: SBANA100010-150
Interface/connection dim's: Threaded hole M6 (1x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 7 Homologation VDE | IMQ Dimension D x H (mm) 30 x 57 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

CH115 General features
Wide display with graphic icons combined with frontal keys for choosing the operation mode.
Possibility to visualize Celsius or Fahrenheit temperature values.
Battery operation life over 4 years.
Low battery charge indication.
Maximum ambient temperature 45 °C.
Dimensions 135 x 83 x 21mm.
Electric features
Power supply with two 1,5V AAA alkaline long life batteries.
Micro disconnection 1B.
Voltage-free switching contact.

Open precision housing KG-O ISO series 3 bore 47mm for open linear bearing for shaft Ø 30mm
Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple.

Article ID: 64653001

Linear ball bearing KB-3 ISO series 3 with shields for shaft Ø 25mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Other, self-aligning versions on request. Stainless version on request.

Article ID: 64602500

Glycerine pressure gauge CrNi steel design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 40 bar, Ø 100
Glycerine-filled bourdon-tube pressure gauge, CrNi steel type.

For use in the chemical/petrochemical process industry, power stations, machinery and industrial plant engineering.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid, corrosive and crystallising media which do not have high viscosity, also in corrosive atmosphere.

Unidirectional flow control valve »lineonline«, Flow one-sided, Hose - hose, for hose Ø 8 mm, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.