Spiral hose coupling set I.D. 7.6, PUR, Medium / ambient temperature -20 °C to 60 °C, Hose Ø 12x8, PN max. 10 bar, Length 2 m
Spiral or straight polyurethane hose, completely assembled with DN 7.6 safety coupling and steel plugs.

Coupling
Safety coupling made of steel / nickel-plated brass for high flow rates, specially designed for all applications susceptible to severe mechanical wear.
Strong, impact and vibration-resistant design for demanding environments.

Polyurethane hose
Extremely flexible spiral hose with excellent kink resistance and insensitive to dirt.
Combines high tear, tensile and impact strength with a long service life and optimal ageing qualities.
This hose is additionally characterised by outstanding resistance to abrasion and resistance to UV.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 32, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, NPN
Sensors, »CS1« type

Straight push-in fitting »click-clock«, G 1/4 i., for hose exterior Ø 4 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Hexagonal counter nut, G 1, AF 46, Working pressure max. 20 bar, Stainless steel 1.4408

Pipe double nipple 23, ET/ET, Black steel, R 3, Length 100.0 mm, Max. working pressure 50 bar, DIN EN 10241
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Amplification sleeve, Pipe exterior Ø 15/12 mm, Operating pressure max. 60 bar, Temperature max 150 °C, Bright brass

Lockwasher DIN 5406 MB3 zinc plated inner diameter 17mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65363781

Frequency:50 Hz
Speed:2770 1/min
Shaft Output:23 W
Volume Flow:103 m³/h
Pressure:Δp s323 Pa
Pressure:Δp t417 Pa
Density:43862 kg/m³
Sound Pressure:62 dB(A)

M3V-KET-PS6-S magnetic cylinder sensor for T-slot pneumatic cylinders with 300 mm PUR cable and M8 Rändelstecker.
The magnetic cylinder sensor M3V-DET can be used in all common T-groove cylinder, and with mounting bracket in Rundzylinder-, tie rod and rod profile cylinder. The insertion of the sensor from above into the slot provides easy and fast assembly. Thanks to the optimized practice attachment technique, a destruction of the sensor is prevented by tightening the Bestigungsschraube.

Operating voltage: 10-30 V DC
Switching frequency: 1000 Hz
Current rating: 150 mA
Current consumption: max. 10 mA
Output: PNP,
Connection: PUR cable 300 mm with M8 Rändelstecker, 3-pole

Size 1000 X 5000 Mm Weight:0,48

600 W

The B744V is a TRIDUCER® Multisensor featuring depth, speed, and temperature in a single housing. The 50/200 kHz, dual-frequency, single, ceramic element provides great target detail in shallow water at 200 kHz and good deep-water bottom tracking at 50 kHz. The B744V is also available with a longer stem (B744VL) that may be needed for steep-deadrise vessels or thick cored-fiberglass or wood hulls.

Length : 150 mm
BAR-HT-23-150-25-1M8-NW-B
SKU: SBANA100030-150
Interface/connection dim's: Threaded hole M8 (1x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 8 Homologation VDE | IMQ Dimension D x H (mm) 30 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

O41NCMAUX General features
Suitable for Z4… valve series
Axial torque 125N.
M30x1,5 coupling.
Electric features
Operating power consuption 2,5W, starting power consuption 36W.

Linear ball bearing KB-3 ISO series 3 with Dichtung for shaft Ø 25mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64612500

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 63, Stroke 450, G 3/8, Working pressure 1.5-10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Suction cage for check valve, Stainless steel 1.4301, Temperature range max. 150 °C, G 1 1/4
Corrosion resistant screw-in strainer, all stainless steel, to suit foot-operated or check valves.

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 32, Stroke 5, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 8, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, PNP
Sensors, »CS1« type

Straight push-in fitting »click-clock«, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

2/3 Tube fitting, G 1 x 16 mm, swivel nut, lightweight CH type, Brass with a bare metal surface

Mounting bracket and fastening nut, for »variobloc«, Size 2, G 1/2, G 3/4 and G 1

Straight screw-in supports, R 3/8 o., for hose I.D. 12 mm, AF 10, Over-pressure max. 17 bar, Temperature range -40°C to 90°C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Lockwasher DIN 5406 MB4 zinc plated inner diameter 20mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65364081

Clamping bush MSD bore 28mm steel
Material: Steel. The MSD clamping bush consists of a
double-walled, hardened steel sleeve filled with a special pressure
medium, a seal, a piston, a compression flange and fastening screws.
When tightening the screws, the sleeves expand evenly against shaft and
hub, creating a rigid connection. When the screws are loosened, the bush
returns to its initial position and can be easily demounted.
Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for
Product No. 615 215 00 only h7), Hub H7 Advantages: -fast
mounting/demounting -sensitive adjustment of the hub can be carried out
during assembly -low fastening torque and few screws allow very simple
assembly. -good concentricity -small dimensions allow little ouside
diametre of the hub MN = transmittable torque at load of 0. If the
screws are fastened with Manz. Fa = transmittable axial force at torque
of 0. If the screws are fastened with Manz. Manz = required fastening
torque for the screws. The dimensions refer to bushes before assembly. Temperature
range: -30° to +85°C.

Article ID: 61522800

Frequency:50 Hz
Speed:1750 1/min
Shaft Output:10 W
Volume Flow:114 m³/h
Pressure:Δp s121 Pa
Pressure:Δp t144 Pa
Density:43862 kg/m³
Sound Pressure:47 dB(A)

M90a-BM12CI-PS6K-S magnetic sensor in all-metal version with M12 connector

Operating distance: 90 mm magnet M 4.0
Operating voltage: 10-30 V DC
Switching frequency: 5000 Hz
Current: ≤ 200 mA
Current: ≤ 10 mA
Output: PNP,
Connection: M12 connector, 3-pole

Le-450-L, 230V Ac, 15W Weight:0,48

250 W

The P32 TRIDUCER®Multisensor is our smallest, most-economical, depth, speed, and. Although small in size, it is packed with many impressive features such as a releasable bracket. The P32 can also be used as a portable, trolling-motor or suction-cup mounted unit.

Length : 150 mm
BAR-HT-23-150-25-2M6-NW-B
SKU: SBANA100020-150
Interface/connection dim's: Threaded hole M6 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 9 Homologation VDE | IMQ Dimension D x H (mm) 30 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C10..Y General features
Sensing element with stainless steel diaphragm.
Tinned copper spiral capillary.
Base, cover and knob in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with Gc 1/2 cable gland.
Unit weight: 0.16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.

Polyurethane timing belt AT5 width 32mm Lw 1500mm 300 teeth 32 AT5/1500
Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths.
Article ID: 16687024

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 63, Stroke 300, G 3/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Ball drain valve, nickel-plated brass, Temperature range -20 °C to 80 °C, G 1/2 ET, DN 15, PN max. 15 bar
With hose connector.

Compact cylinder »ACP«, double-acting, Piston Ø 32, Stroke 75, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Sensor, »CS1« type, for round cylinder series »MI« and »MSI«, Piston Ø 10, HALL sensor, 3-wire, Plug M8, 150 mm cable, NO, NPN
Sensors, »CS1« type

Hexagonal counter nut, G 1/2, AF 32, Working pressure max. 20 bar, Stainless steel 1.4408

Replacement sieve for dirt strainers made of brass, for connection size G 1 1/2, mesh width 0.3 mm, DN 40

Hexagonal counter nut, M54x2, AF 65, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Worm thread hose clamp, Chrome steel 1.4016 (W2), according to DIN 3017, Clamping range 20.0 - 32.0 mm, Belt width 12.0 mm
Worm drive type.

For all standard applications where high clamping forces are normally distributed.

Hexagon-head screw a/f 7, with integrated cross-tip, bright galvanised steel, passivated blue.

Lockwasher DIN 5406 MB5 zinc plated inner diameter 25mm
Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread.
Article ID: 65364481

Two-piece clamp coupling MAT both sides bore 16mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in
the table are maximum values which can only be achieved with perfect
mounting and dimensional accuracy of the shaft.

Article ID: 60099916

Frequency:50 Hz
Speed:2790 1/min
Shaft Output:27 W
Volume Flow:134 m³/h
Pressure:Δp s339 Pa
Pressure:Δp t426 Pa
Density:43862 kg/m³
Sound Pressure:0 dB(A)

Magnetic high temperature sensor Namur with 500 mm silicone cable and M12 connector

Le-600-L, 24V Dc, 14W Weight:0,48

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Combine the fish-finding power of an Airmar transducer with the viewing capability of the Airmar CA500 Camera and get the ultimate underwater observation system. This thru-hull camera will display what is directly below the boat, making it an ideal underwater fishing camera or video surveillance / safety system. Simply connect the single cable to any display with a PAL or NTSC input and spy on the underwater world. We have combined the industry renowned Airmar housings with one of the lowest Lux (0.01) cameras available today—all protected by a sapphire viewing window that resists scratching or cracking. The retractable housing with valve is available in plastic, bronze, or stainless steel and allows for easy servicing and cleaning of the camera while the boat is in the water. See what you have been missing with the Airmar CA500 Underwater Camera.

Manufacturer Part Numbers
Raymarine—A62300——Airmar—44-122-1-04

Length : 150 mm
BAR-HT-23-150-25-2M8-NW-B
SKU: SBANA100040-150
Interface/connection dim's: Threaded hole M8 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 10 Homologation VDE | IMQ Dimension D x H (mm) 30 x 70 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C10..Y General features
Sensing element with stainless steel diaphragm.
Tinned copper spiral capillary.
Base, cover and knob in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with Gc 1/2 cable gland.
Unit weight: 0.16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.

Ball transfer unit 350 with steel-sheet housing ball diameter 30mm completely from stainless steel
Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65435030

Service unit 2-part »multifix«, Metal container, Viewing tube, Size 1, G 1/4, Input pressure max. 20 bar, Control range 0.5-10 bar
Two-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.

3/3 Stand pipe fitting, G 1 ET x 25 mm, nut 1 1/4, taper seat, lightweight type, Brass with a bare metal surface

Compact cylinder »ACP«, double-acting, Piston Ø 40, Stroke 55, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.