L-multi-distributor »Blue Series«, 3-fold, rotating, G 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

This micro-processed controller serves for temperature control at high measuring accuracy. Beside resistance sensors the multi-sensor input can equally process semiconductor thermo element. Outputs are two relay contacts. The setting of parameters permits any assignment of the two control circuits and/or the range alarm to the existing switching relays. The control setpoints and parameters determining the process are adjusted with a 4-field plastic foil keyboard. 900305.004

Taper-bush 4545 bore 85mm
Material: GG25.

Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in
delivery (spare screw product no. 622 515 99, order quantity as needed).
Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground.
Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather
key, depending on the required torque. Other bush sizes and bores are
available on short notice (some in stock). Assembly
instructions
In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm;
bore 75mm: 3000 Nm; bore 100mm: 4500 Nm

Article ID: 62251585

Pressure Ranges -1 to 700 bar
Accuracy +/- 1%
100mm + 160mm Gauge Sizes
Glycerine Filled

Rotating joint for machine tool spindles
Single input / output line

Frequency:50 Hz
Speed:2800 1/min
Shaft Output:127 W
Volume Flow:332 m³/h
Pressure:Δp s559 Pa
:Δp t759 Pa
Density:43862 kg/m³
Sound Pressure:70 dB(A)

200357-1.922 MVG5 320-2-35
MGHN 5 A GL.. 3,6kW, 460V, 60Hz
RAL 7031; PTC thermistor Medium pressure cast iron fan
Rotating direction: clockwise (Piller rotates left)
Efficiency: IE2 according to IEC 60034-30
Motor rating. 3.6 kW
Rated voltage: 460 volts
Current Rating: 5.12 Amp.
Protection class: IP55
Insulation class: F
Motor protection: PTC
Impeller: Steel plate
Casing. gray cast iron (GG 20)
Housing cover: gray cast iron (GG 20) Painting: RAL 7031 (blue gray)
Motor paint: manufacturer's color (WEG)
Shaft seal: Felt ring
Pressure out flange: DN 140 to DIN 24154 R4
Suction flange: DN 140 according to DIN 24154 R4
Housing position: GL - In case of order please specify.
For foot position: R - In case of order please specify.
Terminal box position: R - In case of order please specify.
Volume air rate: max. 2700 m³ / h
Pressure difference: max. 3050 Pa

Changeover Contact With Thermal Feedback Weight:0,08

Applications
Powder, granular, slurry, and liquid
Long-range level measurement
Specs English
Specs German
Specs Spanish

Diameter : 80 mm
HEPM-EM-D080-038-SW
SKU: GM17808
Stock: 10
Max. holding force: 2200 N
Interface/connection dim's: Threaded hole M8
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 75 Homologation Dimension D x H (mm) 50 x 120

Flexible leads / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

IM General features
All coils are made of copper wires of class H (180°C).
30% glass fibre thermoplastic housing, insulation class F (155°C) suitable for continuous operation (100% ED).
Protection degree IP65.
Maximum ambient temperature 80°C.
Electric features
Quick connection connector DIN 43650,  suitable for all IM2 coils.
Cable gland Pg9 (cable diameter 6÷8 mm).
Pg11 cable gland thread;
Adjustable cable outlet in 4 positions every 90°.

PARALLEL NIPPLE LENGTH 200 MM - STAINLESS STEEL 316

Information

Coil fully " fully threaded A (c) e - Stainless steel 316> DiamA " very available: from DN6 to DN50 - Gas thread> Nominal pressure of the coil fully " fully threaded A (c) e: - 20 bar At 20AdegC- 16 bar A 100AdegC> Standard ISO 228-1

Washer DIN EN ISO 7089 (DIN 125 A) for M5 (5,3x10,0x1,0mm) material steel zinc plated
Material: Steel, zinc-plated.
Article ID: 65315500

Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 10mm hardened and ground outside diameter 27mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22482500

3-8 inch, 120 C

5/3-way valve, electropneum., Centre closed, Connection G 1/4, DN 7.5, 230 V, 50 Hz, Operating temp. -10 °C to 60 °C, Aluminium

Female connector, G 1/2 i., Pipe exterior Ø 14, PN max. 630 bar, a/f1 27, a/f2 30, galvanised steel
Female connector, parallel thread, heavy type

Stainless steel ball valve, 3-piece, length acc. to DIN 3202-M3, G 3/4, DN 20, Operating temp. -20 °C to 180 °C, PN max. 63 bar

Pipe double nipple, G 2, Length 100 mm, Working pressure max. 10 bar, Medium / ambient temperature max. 90 °C, Bright brass

Reducer, Pipe exterior Ø Female connector 14/8 mm, PN max. 630 bar, a/f1 17, a/f2 19, a/f3 27, galvanised steel
Reducer, heavy type

Angled screw-in fitting »value line«, R 1/4 o., for hose exterior Ø 10 mm, Operating pressure max. 16 bar, nickel-plated brass
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.

Pipe double nipple, R 3/4, Length 60 mm, Working pressure max. 40 bar, Stainless steel 1.4571

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 12.0 mm, Clamping range 16.0 - 25.0 mm

Straight screw-in fitting, G 1/8 o., for hose 6/8 mm, AF 17, Working pressure max. 10 bar (20°C)/max. 1 bar (60°C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Diaphragm

GEKA hose piece, rigid, Potable water, bright brass, G 1 1/4 i., Operating pressure max. 40 bar, Med./ambient temp. -10°C to 90°C
GEKA-Kupplungen für Trinkwasser, Serie »GEKA-plus«, Messing blank, mit KTW-Zulassung

Replacement seal for Storz coupling, made of NBR, Storz size 25-D, Tappet distance 31 mm

Push-in L-fitting »Blue Series«, rotating, R 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

T screw-in fitting, R 1/8 o., Pipe exterior Ø 8 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

T-hose fitting supports, for hose I.D. 3 mm, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Extension piece, Long, G 1/4 o., G 1/4 i., AF 17, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Push-in T-fitting »click-clock«, rotating, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

This micro-processed controller serves for temperature control at high measuring accuracy. Beside resistance sensors the multi-sensor input can equally process semiconductor thermo element. Outputs are three relay contacts. The setting of parameters permits any assignment of the control circuits and/or the range alarm to the existing switching relays. The control setpoints and parameters determining the process are adjusted with a 4-field plastic foil keyboard. 900305.013

Taper-bush 4545 bore 80mm
Material: GG25.

Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in
delivery (spare screw product no. 622 515 99, order quantity as needed).
Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground.
Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather
key, depending on the required torque. Other bush sizes and bores are
available on short notice (some in stock). Assembly
instructions
In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm;
bore 75mm: 3000 Nm; bore 100mm: 4500 Nm

Article ID: 62251580

Pressure Ranges -1 to 700 bar
Accuracy +/- 1%
100mm + 160mm Gauge Sizes

Frequency:50 Hz
Speed:2740 1/min
Shaft Output:127 W
Volume Flow:473 m³/h
Pressure:Δp s503 Pa
Pressure:Δp t632 Pa
Density:43862 kg/m³
Sound Pressure:70 dB(A)

14192-1.000 ENG 1-1,2BK
110V 50HZ
Weight: 1.4 kg

Opening And Closing Contact İn One Housing Weight:0,08

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The R99 is our high-performance external-mount transducer. The large, narrow beam, 200 kHz, element gives incredible target detail and allows fishermen to discriminate between a single fish target and bait at any depth range. The 50 kHz array provides unparalleled deep-water performance and precise image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.

Manufacturer Part Numbers
Furuno NC—CA50/200TID-R99 W/FB——Airmar—41-284-1-01
Garmin—010-10642-00——Airmar—41-235-1-01
Raymarine—E66075——Airmar—41-287-1-01

Max. stack height : 240 mm
HSS-F-BA-073x029-0270-B
SKU: TBSP000270
Stock: 42
Width: 73 mm
Sheet separators with ferrite magnets are suitable for separating sheets in the most common situations.

Permanent magnetic
For sheets up to 4 mm thick
Max. stacking height 490 mm
Steel enclosure
Ferrite magnet

Operation

Ferrite sheet separator operation

The magnetic field automatically forces the sheets apart and separates them. When the upper sheet is removed, the next one rises immediately.
To prevent malfunctions in fully automated production processes we recommend the use of a number of extra sheet separators.

Installation example 1

Corner installation

For optimum results, it is best to place two sheet separators at the corner(s) of stacks of large steel sheets.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 2

Installation across from each other

Sheet separators placed across from each other ensure that the sheets begin to ‘float’.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 3

Single-piece installation

For small sheets, it is best to place the sheet separator in the middle of the shortest side.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 80 Homologation Dimension D x H (mm) 50 x 120

Flexible leads / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

IM General features
All coils are made of copper wires of class H (180°C).
30% glass fibre thermoplastic housing, insulation class F (155°C) suitable for continuous operation (100% ED).
Protection degree IP65.
Maximum ambient temperature 80°C.
Electric features
Quick connection connector DIN 43650,  suitable for all IM2 coils.
Cable gland Pg9 (cable diameter 6÷8 mm).
Pg11 cable gland thread;
Adjustable cable outlet in 4 positions every 90°.

WELDING NIPPLE LENGTH 300 MM - STAINLESS STEEL 316L

Information

MAC / le - 316L stainless steel> DiamA " very available: from DN15 to DN50 - Gas Thread> Features (c) ristics of the mAC / le - 316L stainless steel: Tube RoulA (c) / SoudA (c) - Schedule 20S> Nominal pressure of the mAC / le nozzle: PN50> ISO standard 7/1

Washer DIN EN ISO 7089 (DIN 125 A) for M6 (6,4x12,0x1,6mm) material steel zinc plated
Material: Steel, zinc-plated.
Article ID: 65315600

Cylindrical ball screw nut 12x4mm height 30mm outer diameter 22mm
Material: Bearing steel 100Cr6, No. 1.3505.To be combined with Maedler® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Article ID: 64012046

3-8 inch, 130 C

5/3-way valve, electropneum., Centre closed, Connection G 1/4, DN 7.5, 24 V DC, Operating temp. -10 °C to 60 °C, Aluminium

Straight screw-in fitting, ET conical, R 1/8, for hose 8/6 mm, AF 14/13, Pressure max. 25 bar, Stainless steel 1.4404
Supplied without seals. For use with corrosive media and at high temperatures.

Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential.
The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.

Fitting 341, conical sealing, R 3, Rp 3, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Replacement filter element for stainless steel filter 1.4404 and stainless steel filter regulator 1.4404, G 1/2

Quick-connect coupling I.D. 5, bright brass, Sleeve I.D. 5, Operating pressure 0 - 35 bar, Medium / ambient temp. -20 °C to 100 °C
One-hand quick disconnect couplings, one side sealing, compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive, food technology.

Plug-in angle for couplings I.D. 7.2 - 7.8, bright brass, for hose 10x8, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Reducing fitting, Sealing cone, Nut M22x1.5 i., Pipe exterior Ø1 15 mm, Pipe exterior Ø2 12 mm, PN max. 315 bar, galvanised steel
Reducer, with cone seal, light type

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 12.0 mm, Clamping range 20.0 - 32.0 mm

Angled bulkhead connector, M10x1, for hose 4/6 mm, AF 14, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Angled hose fitting, for hose 4/6 mm, Working pressure max. 10 bar (20 °C)/max. 2.5 bar (90 °C), PP
Chemically resistant to almost all inorganic acids and bases, even in high concentrations and at temperatures greater than 90 °C.

Cross-piece, 4 x interior, G 3/8, AF 17, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass