Weight:0,08

Applications
Level measurement
Level measurement in chemically aggressive environments
Food and beverage processing
Proximity sensing
Obstacle avoidance
Specs English
Specs German
Specs Spanish

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 60 Homologation Dimension D x H (mm) 50 x 120

Flexible leads / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

IM General features
All coils are made of copper wires of class H (180°C).
30% glass fibre thermoplastic housing, insulation class F (155°C) suitable for continuous operation (100% ED).
Protection degree IP65.
Maximum ambient temperature 80°C.
Electric features
Quick connection connector DIN 43650,  suitable for all IM2 coils.
Cable gland Pg9 (cable diameter 6÷8 mm).
Pg11 cable gland thread;
Adjustable cable outlet in 4 positions every 90°.

BARREL NIPPLE LENGTH 80 MM - STAINLESS STEEL 316L

Information

Cylindrical nipple - 316L stainless steel> DiamA " very available: from DN10 to DN50 - Gas thread> Characteristics of the cylindrical nipple - 316L stainless steel: Tube RoulA (c) / SoudA (c) - Schedule 20S> Nominal pressure of the nipple cylindrical: PN50> ISO 7/1 standard

Washer DIN EN ISO 7089 (DIN 125 A) for M3 (3,2x7,0x0,5mm) material steel zinc plated
Material: Steel, zinc-plated.
Article ID: 65315300

Miniature slide unit rail width 9mm overall length 35mm travel 28mm
Material: Slides, rail and balls: Stainless steel 1.4034. Cage and end pieces: Plastic. Technical data: -Speed: Up to 3 m/s. -Acceleration: Up to 80 m/s². -Accuracy class: P5 (standard, for most applications). -Preload class: TO (standard, slight clearance). -Other accuracy classes and preload classes on request. -Temperature range: -20°C to +80°C. Four rail widths to choose from (7, 9, 12 and 15 mm). Lubrication: Prelubricated with Paraliq P460. Relubrication intervals depend on the type of application. Ready-to-mount, pre-assembled stainless miniature slides for limited stroke. The especially compact construction of the slide in combination with high running accuracy (5 µm/100 mm stroke) and extremely smooth motion offers optimum capabilities for many different applications. All technical parameters were set to ensure high system stiffness and precision guidance. Contents of Delivery: One slide mounted on a rail.
Article ID: 64970105

1-4 inch, 130 C

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 80, Stroke 25, G 3/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Straight push-in fitting »Blue Series«, G 1/2 i., for hose exterior Ø 16 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Inline pressure regulator, 2 x IT, with secondary venting, Pre-pressure dependent, G 3/8, Working pressure (pre-set) 6 bar
The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload.

Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side. Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots).

This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.

Compact cyl.ISO 21287, single-acting, female piston rod, ext.,magnet,PistonØ12,Stroke5,M5, Work.press.max.10bar,Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Double threaded nipple, G 3/8 o., G 3/4 o., AF 32, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Nipple, I.D. 7.2 - 7.8, bright brass, G 1/2 ET, Thread coating, Operating pressure 0-12 bar, Medium / ambient temp. -20°C to 100°C

Reducer, Pipe exterior Ø Female connector 22/12 mm, PN max. 160 bar, a/f1 24, a/f2 22, a/f3 36, galvanised steel
Reducer, light type

1-ear hose clamp with insert ring, Stainless steel 1.4301 (W4), Clamping range 8.2 - 9.5 mm, Belt width 7.8 mm

Flat suction cup, round, Material NBR, »PFG«, ø:20 suitable connection nipple IT G 1/8, suitable connection nipple ET G 1/8
Robust and hard-wearing suction pad with a single sealing lip.
Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to handle smooth or slightly rough surfaces. Due to its flat shape, it can grip the workpiece in a very short time and withstand the forces that result from fast movement of the object during handling. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very short evacuation timesSuitable for high lateral forcesGood intrinsic stability when attached to the loadSupports on the bottomVery short cycle timesHigh suction forces with small dimensions

Applications:
Handling workpieces with smooth or slightly rough surfaces, e.g. metal sheets,
cardboard boxes, sheets of glass, plastic parts and sheets of wood.

T multi-distributor, Plug connector »Blue Series«, 3 reducing Outlets, for hose exterior Ø 2x10/3x6 mm, max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight screw-in fitting, R 1/2 o., Pipe exterior Ø 12 mm, PN bar 630, A/F1 24, A/F2 22, galvanised steel
Male connector, conical male thread acc. to ISO 7-1, heavy type

1-ear hose clamp with insert ring, Steel bright galvanised (W1), Clamping range 11.5 - 13.3 mm, Belt width 8.8 mm
An absolutely safe all around setting is ensured by the pre-mounted insert ring. Suitably for use with soft and sensitive hose material.

Foot fastening, ISO 15552, for compact cylinder, Standard cylinder, Piston Ø 40, 1 piece with 2 screws

RSGU pipe clamp, galvanised steel (W1), with rubber profile, D1 shape acc. to DIN 3016, Clamping range 6.0 mm, Belt width 12.0 mm
Acc. to DIN 3016, type D1.
For fastening hoses, pipes, compressed air lines and cables.
Rubber profile protects against vibrations and creeping water.

Push-in T-fitting »click-clock«, rotating, R 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Push-in L-connector »Blue Series«, for hose exterior Ø 6 mm, Working pressure max. 10 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

T-fitting, Pipe exterior Ø 6 mm, AF 9, AF1 12, Operating pressure max. 60 bar, Temperature max 150 °C, nickel-plated brass

T-hose fitting supports, for hose I.D. 9 mm, brass CW617N, Max. working pressure 10 bar, Max. medium/ambient temp. 90 °C

Screw-in hose connector, G 1/4 o., for hose I.D. 4, nickel-plated brass
Suitable for air, water, oil, steam, etc.

As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

L-multi-distributor »Blue Series«, 3-fold, rotating, R 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

The controller ST48-JBUA.100 was developed for simple thermostatic controls. The setpoint, all parameters of the controller and the activation of the stand-by function are set on a four-field plastic foil keyboard. The controller can be supplied with a tension of 230V AC. The installed relay has a maximum electric Ohm load of 6A. Inductive loads can be switched up to 2,2A. 900305.003

Taper-bush 4545 bore 90mm
Material: GG25.

Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in
delivery (spare screw product no. 622 515 99, order quantity as needed).
Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground.
Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather
key, depending on the required torque. Other bush sizes and bores are
available on short notice (some in stock). Assembly
instructions
In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm;
bore 75mm: 3000 Nm; bore 100mm: 4500 Nm

Article ID: 62251590

Pressure Ranges -1 to 700 bar
Accuracy +/- 1%
100mm + 160mm Gauge Sizes

Frequency:50 Hz
Speed:2730 1/min
Shaft Output:86 W
Volume Flow:288 m³/h
Pressure:Δp s532 Pa
Pressure:Δp t681 Pa
Density:43862 kg/m³
Sound Pressure:69 dB(A

For Machine Lights, Length 2M Weight:0,08

Applications
Level measurement
Proximity
Obstacle avoidance
Traffic control
Specs English
Specs German
Specs Spanish

Length : 140 mm
SVM-F-114x47-0140-B-F0E
SKU: SVMF010140
Stock *: 0
Type: VMF1
Advised max. installation height: 50-65 mm
Interface/connection dim's: Threaded hole M8 (2x)
Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C.They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.

Magnet quality ferrite GSFD-33 (Br 4100 gauss)
Capture Fe particles from 0.5 mm
Manual cleaning (wipe off)
Max. temp. 100 °C
Max. holding field 140 mm

Application

Ferrous contaminants > 0.5 mm / heavy / non-food

Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C. They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.
 
Select your magnet size on the desired holding field depth. The deeper the field should reach, the heavier and larger magnet you have to select. For this reason it can be wise to select the more compact and strong neodymium (Neoflux®) plate magnets.
 
Placement
You can easily hang them suspended over a conveyor belt, attach them to the wall of a product channel, or mount them under a passing product stream. For dust-tight installation against the wall of a free-fall pipeline, we supply neodymium plate magnets including a mounting plate and quick-cleaning mechanism (see chute magnets).
 
* When placing above a belt, make sure that the construction directly below the magnet consists of non-magnetic material.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

Magnet quality: ferrite GSFD-33
Material cap: stainless steel
Material contact plate: Steel
Finish: painted


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Cleaning

Cleaning of the plate magnet is performed manually by wiping, or through use of a hinged extractor plate for quick-cleaning. You can swing the hinged extractor plate away from the magnet. The ferrous particles fall off of the extractor plate as soon as they are moved far enough away from the magnet.
 
For plate magnets including mounting plate and hinged cleaning construction: see also 'chute magnets'.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 70 Homologation Dimension D x H (mm) 50 x 120

Flexible leads / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

IM General features
All coils are made of copper wires of class H (180°C).
30% glass fibre thermoplastic housing, insulation class F (155°C) suitable for continuous operation (100% ED).
Protection degree IP65.
Maximum ambient temperature 80°C.
Electric features
Quick connection connector DIN 43650,  suitable for all IM2 coils.
Cable gland Pg9 (cable diameter 6÷8 mm).
Pg11 cable gland thread;
Adjustable cable outlet in 4 positions every 90°.

HEXAGONAL NIPPLE - STAINLESS STEEL 316

Information

Hexagonal nipple - Stainless steel 316> DiamA " very available: from DN6 to DN50- Gas thread> Nominal pressure of the hexagonal nipple: - 20 bar A 20AdegC- 16 bar A 100AdegC> Standard ISO 228-1

Washer DIN EN ISO 7089 (DIN 125 A) for M4 (4,3x9,0x0,7mm) material steel zinc plated
Material: Steel, zinc-plated.
Article ID: 65315400

Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 12mm hardened and ground outside diameter 27mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22482512

3-8 inch, 130 C

3/2-way valve, electropneum., bistable, G 1/8, 230 V, 50 Hz, Operating pre. 1- 10 bar, Operating temp. -10 °C to 60 °C, Aluminium

Kamlok closing cap for quick-connect plug, DC type, Stainless steel 1.4401, Size 1, for plug Ø 37 mm, Pressure max. 16 bar
High-quality, robust, universal coupling system with a safety clamp for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok stainless steel couplings are designed for use with corrosive media in the chemical and petrochemical industries, steelmaking, shipbuilding, agriculture, etc.

All female threaded couplings and connectors are with female thread sealing ring made of PTFE.

Inline pressure regulator, 2 x IT, with secondary venting, Pre-pressure dependent, G 3/8, Working pressure (pre-set) 8 bar
The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload.

Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side. Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots).

This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.

Compact cyl.ISO 21287, single-acting, male piston rod ext.,magnet,PistonØ12,Stroke5,M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Reducer, Pipe exterior Ø Female connector 12/8 mm, PN max. 630 bar, a/f1 17, a/f2 19, a/f3 24, galvanised steel
Reducer, heavy type

Pressure gauge fitting, G 1/4 i., Pipe exterior Ø 8 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass

Push-in L-connector »metallica«, for hose exterior Ø 14 mm, Working pressure max. 16 bar, Operating temperature -20 °C to 150 °C
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 12.0 mm, Clamping range 12.0 - 20.0 mm

Straight push-in connector, Plug nipple reducing 4 mm, »click-clock«, for hose exterior Ø 3 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Straight screw-in fitting, R 3/8 o., Pipe exterior Ø 16 mm, PN bar 400, A/F1 30, A/F2 27, galvanised steel
Male connector, conical male thread acc. to ISO 7-1, heavy type

Push-in T-fitting »Blue Series«, L-shape, rotating, G 1/2 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Stopper POM, Supports 4 mm, Colour red, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Plug-in connector, I.D. 5, locking on both sides, Bright brass, Sleeve I.D. 4, Operating pressure 0-35 bar, Temp. -20 °C to 100 °C

Push-in L-fitting »Blue Series«, rotating, M5 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Flange fastening, »FA« type for short stroke cylinder »ACQ« and »ASQ«, Piston Ø 16
Flange model, »FA« type

Y hose connection supports, for hose I.D. 9 mm, brass CW617N, Max. working pressure 10 bar, Max. medium/ambient temp. 90 °C

Blind stopper, R 1/4 o., AF 10, Over-pressure max. 14 bar, Temperature range -40 °C to 90 °C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.