Pressure Ranges -1 to 700 bar
Accuracy +/-1%
100mm + 160mm Gauge Sizes
Glycerine Filled

Rotating joint with aluminium-, stailnless steel or brassdesign for air, vacuum, hydraulic oil
Double flow with stationary syphon pipe with ISO 228-thread
internal term: RTO One way: yes 2 way with a standing inner tube: No 2 way with rotating inner tube: No

Frequency:50 Hz
Speed:1360 1/min
Shaft Output:24 W
Volume Flow:220 m³/h
Pressure:Δp s82 Pa
Pressure:Δp t112 Pa
Density:1.2 kg/m³
Sound Pressure:51 dB(A)

M25 X 1,5 Weight:0,05

Applications
Level measurement in chemically aggressive environments
Food and beverage processing
Flow monitoring
Specs English
Specs German
Specs Spanish

Diameter : 32 mm
HEPM-EM-D032-022-SW
SKU: GM17803
Stock: 35
Max. holding force: 230 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 25 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94

Twin cable / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

G2 copper sheath General features
Copper sheath for C0 thermostats series
Electric features

HEXAGONAL NIPPLE - STAINLESS STEEL 316

Information

Hexagonal nipple - Stainless steel 316> DiamA " very available: from DN6 to DN50- Gas thread> Nominal pressure of the hexagonal nipple: - 20 bar A 20AdegC- 16 bar A 100AdegC> Standard ISO 228-1

Hexagon nut DIN 934 brass Ms60 thread M3 right handed
Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65270300

Timing belt pulley HTD 14M material steel 44 teeth for belt width 85mm for taper bush 3030
Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 17677322

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

1 1-4 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0 - 4 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Cable tie, PA 6.6, black, Band: 4.8 x 350 mm, Operating temperature -45 °C to 85 °C, PU 100 pcs.
Cable tie / hose tie from polyamide 6.6 for fast, seamless and reliable bundling of cables, hoses, etc.. The black cable tie offers a higher resistance to UV radiation thanks to the enclosed "soot".
Application: electrical installations, industrial cabling, automobile cabling, marine cabling, pre-fab buildings, special applications.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 2, G 1/2, max. 25 bar, 0.5 - 10 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Pneumatic logic elements, NOT, Techno-polymer, DN 2.7, Temperature range -10 °C to 60 °C, Working pressure 0.4 to 6 bar
Pneumatic logic elements are available with five different functions: OR, AND, NOT, YES, MEMORY.
All elements have an adapter for the Ω-rail (DIN EN 50022) integral with the body.

Bellows suction cup, Round 1.5 folds, Silicone material, »FGA«, ø11 mm, suitable connection nipple IT G 1/8, ET M5 / G 1/8
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very stiff top foldSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with?uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Plug nipple »Blue Series«, reducing, plug nipple 12/10 mm, Working pressure max. 15 bar, Plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Male branch elbow »universal short«, long, rot. 3/8, hose-Ø10, taper seat, Working pressure -0,99 to 20 bar, nickel-plated brass
The quick-connect fittings of the »universal short« series are true to their name and are used for the quick and simple connection of hoses. The conical sealing threads off a high degree of flexibility, as it is compatible with both conical and cylindrical threads. Thus the quick-connect fitting can be combined with a wide variety of thread types (BSPP, BSPT, NPT, NPTF, PT, PF) of standards ISO 7.1 and ISO 228. Shorter assembly ties result from the reduced thread length. The smaller hole spacing, resulting from the reduction of the width across flats, enables installation in very tight spaces. This saves time and space.

The complete sealing is also guaranteed on uneven, for example inclined, concave or convex surfaces, and with differing radii and chamfers. The special geometry of the seal enables vacuum applications.

Suitable plastic pipes: PA11, PA12, polyethylene, polyurethane (for polyurethane a hardness of 98 shore is recommended), PTFE.

Areas of application: Pneumatic automation, automotive industry, textile and packaging industry, compressed air circuits, vacuum applications.

Locking screw, Hexagonal socket and flange, G 1/8, AF 5, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Extension piece, short, R 3/8 o., G 3/8 i., AF 22, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Push-in T-fitting »click-clock«, rotating, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

T screw on distributor, G 1/4, AF 22, Brass

Y hose connection supports, for hose I.D. 6 mm, Bracket 90°, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Extension piece short »value line«, M5 o., G 1/8 i., AF 14, Operating pressure max. 60 bar, Operating temperature max. 150 °C
For air, water, steam, oil, etc.

Worm thread hose clamp, Steel bright galvanised (W1), Clamping range 167.0 - 202.0 mm, Belt width 20.0 mm
Worm-drive type.

Extremely robust hose clamps for all applications where heavy loads occur and high forces are transmitted.

Hexagon-head screw slotted, a/f 13, bright galvanised steel, passivated blue.

Angled screw-in fitting, ET conical, R 1/2, for hose 8/6 mm, AF 16, Working pressure max. 18 bar, nickel-plated brass

Straight screw-in fitting, Kink protection spring, G 1/4 o., for hose 6/4 mm, Working pressure max. 18 bar, nickel-plated brass

Angle connector POM, for hose exterior Ø 6 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Locking screw »value line«, M5, AF 8, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass
For air, water, steam, oil, etc.

Plug for bite-type tube fitting, Pipe exterior Ø 28 mm, PN max. 160 bar
Plug, light type

L-multi-distributor »Blue Series«, 2-fold, rotating, G 3/8 o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

The controller ST710-JB1JA.10 was developed for simple thermostatic applications. Due to its complete equipment it can operate without any further components in many cases, e.g. cut-out relay or main switch.
The controller is supplied with 230V AC and has an output relay with an Ohm maximum electric load of 12A. The controller has 4 keys. Three of them are there to controller adjustments. The fourth key activates stand-by function. 900212.010

Taper-bush 4545 bore 110mm
Material: GG25.

Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in
delivery (spare screw product no. 622 515 99, order quantity as needed).
Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground.
Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather
key, depending on the required torque. Other bush sizes and bores are
available on short notice (some in stock). Assembly
instructions
In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm;
bore 75mm: 3000 Nm; bore 100mm: 4500 Nm

Article ID: 62251593

Pressure Ranges -1 to 700 bar
Accuracy +/-1%
60mm – 150mm Gauge Sizes

Rotating joint with aluminium-, stailnless steel or brassdesign for air, vacuum, hydraulic oil
Double flow with stationary syphon pipe with ISO 228-thread
internal term: RTO One way: yes 2 way with a standing inner tube: No 2 way with rotating inner tube: No

Frequency:50 Hz
Speed:1350 1/min
Shaft Output:20 W
Volume Flow:137 m³/h
Pressure:Δp s88 Pa
Pressure:Δp t100 Pa
Density:1.2 kg/m³
Sound Pressure:51 dB(A)

For Lv 300 And Gv 300 Weight:0,057

Applications
Level measurement in chemically aggressive environments
Food and beverage processing
Proximity sensing
Obstacle avoidance
Specs English
Specs German
Specs Spanish

Diameter : 40 mm
HEPM-EM-D040-025.5-SW
SKU: GM17804
Stock: 8
Max. holding force: 400 N
Interface/connection dim's: Threaded hole M5
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 30 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94

Twin cable / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

B71A General features
Sensitive element with friction membrane.
Adjustable differential.
Female connection G 1/4.
Cover in shockproof thermoplastic material.
The metallic parts are in steel.
Earth clamp.
Output connections with two cable glands.
Maximum temperature of the controlled fluid: 70°C.
Pressure switch body admissible temperature: -15 ÷ 60°C.
Storage and transport temperature: -15 ÷ 60°C.
Unit weight: 0.35 Kg.
Electric features
Rated insulation voltage Ui 415V~
Continuous duty rated current Ith 15A

WELDING NIPPLE LENGTH 50 MM - STAINLESS STEEL 316L

Information

MAC / le - 316L stainless steel> DiamA " very available: from DN8 to DN50 - Gas Thread> Characteristics (c) ristics of the mAC / le - 316L stainless steel: Tube RoulA (c) / SoudA (c) - Schedule 20S> Nominal pressure of the mAC / le nozzle: PN50> ISO standard 7/1

nut DIN 934 A2 M4 RH
Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65299004

Precision shaft steel with shaft support Ø 50h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64745003

Timing belt pulley HTD 14M material steel 44 teeth for belt width 40mm for taper bush 3020
Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 17677122

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

1 1-4 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, eccentric, G 1/2, Meas. range 0 - 25 bar, Ø100
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Cable tie, PA 6.6, natural, Band: 4.8 x 350 mm, Operating temperature -45 °C to 85 °C, PU 100 pcs.
Cable tie / hose tie from polyamide 6.6 for fast, seamless and reliable bundling of cables, hoses, etc.. The black cable tie offers a higher resistance to UV radiation thanks to the enclosed "soot".
Application: electrical installations, industrial cabling, automobile cabling, marine cabling, pre-fab buildings, special applications.

Pressure regulator for control panel integration »Standard«, without pressure gauge, Size 2, G 1/2, max. 25 bar, 0.5 - 6 bar
Incl. panel nut and washer.

Reversible diaphragm pressure regulators, independent of inlet pressure,
with self-relieving design.

Double threaded nipple, R 1 o., R 1 o., AF 41, Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Screw-in hose connector, G 3/4 o., for hose I.D. 19 mm, AF 32, brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Sintered bronze silencer, flat, G 3/8 o., Operating pressure max. 10 bar, Operating temperature -10 °C to 250 °C
For reducing the exhaust noise generated by pneumatic equipment.

Straight Push-in fitting »Blue Series«, Self-locking, G 3/4 o., for hose exterior Ø 12 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.