Ball head precision levelling adjuster with locknut MN 686.9 30-17.5
Material: 42CrMo4V, Nr. 1.7225, zinc plated and blue passivated. For non-parall surfaces up to 4° slope. Larger overall height with more adjustment travel. With lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (steel bolt strength class 8.8, stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68693500

Ball valve 3/2-way »multifix«, lockable, venting hole, Size 4, G 1, Input pressure max. 16 bar, Med. / ambient temp. max. 60 °C
Rotary switch can be turned 90°, lockable, with relief port including silencer.

Standard pressure gauge with front ring, black, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0-40 bar, Ø40
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 40, Stroke 10, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way miniature valve, manual, Push button, NC, monostable, M5 (side), Operating pre. 0.5-10 bar, Operating temp. -10°C to 60°C
Monostable (non-latching) and bistable (latching) versions available.

Bellows suction cup, Round 2.5 folds, Material NBR, »FG«, suitable connection nipple IT G 1/8, ET M5 / G 1/8, Ø18mm
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Soft, flexible foldsSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Angled screw-in fitting, R 1/4 o., for hose 6/4 mm, AF 8, Brass
For the installation of plastic tubing.

Push-in T-fitting »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Hose sleeve with ball nipple, for hose I.D. 6, Brass, Max. working pressure 25 bar, Max. operating temp.150 °C

Timing belt pulley from steel T10 72 teeth belt width 32mm for taper bush 2517
Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 16477472

Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7
Material: Stainless Steel 1.4301
(X5CrNi1810). Needle bearings from bearing steel.

Max. Operating Angle 90°. The needle-bearing universal joints have
almost zero backlash, high accuracy and good turning properties. These
special needle-rollers without cage can take high loads even at large
operating angles. A special grinding process realizes a perfect
parallelism of the axes and the single parts of the joints - which
guarantees an extremely long service life.
Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199650

Rubber buffer GH ø 20mm height 15mm with through hole 8,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572015

Suitable for belt width : 600 mm
RHP-B204A06-060-RSD-BA
SKU: RHAN20060000
Stock *: 0
Diameter: 204 mm
Magnet field strength (flux density) (±10%): 3000 gauss
Magnetic system: Permanent Neoflux® magnet
Magnetic head pulleys capture ferrous and weakly magnetic particles and continuously carry them away. Suitable for installation in existing belt conveyor systems, in the bulk transshipment or recycling industries for example.

Cost-effective and robust
With neodymium or ferrite magnets
Permanent magnet
Automatic cleaning (continuous)
According to your requirements

Application

Application

A magnetic head pulley, or head roller magnet, separates ferromagnetic particles, such as iron or steel, and even weakly magnetic particles (such as particles from processed stainless steel) from coarse to very fine fractions and carries them away completely automatically and continuously. This magnetic roller is built into an existing conveyor belt system as a head or tail roller. and is a cost-effective magnetic metal separator. It is important to feed the material onto the conveyor belt with the magnetic conveyor roller in a thin layer (ideally a mono-layer). Magnetic head pulleys require practically no maintenance, and because these magnets are integrated in an existing installation there are almost no extra operating and energy costs.
 
For larger layer thickness a head roller magnet can be combined with a suspension or overband magnet. In this configuration the suspended magnet draws the pieces of steel out of the upper layer and the head roller magnet draws them from the lower layers of the bulk flow. Magnetic head roller separators are particularly well suited for separation of problematic shapes such as ball bearings or batteries. They are used for:

recycling and/or recovery of ferrous metals
removing, purging or eliminating ferrous parts or weakly magnetic particles from product flows
protection of machines (prevention of damage caused by metal particles)


Placement

Placement

Keep the following in mind when integrating a magnetic head pulley:

Use of head scrapers is not possible. Otherwise iron particles would be scraped off before the magnet can separate them.
No steel components in the vicinity of the head roller magnet (such as the splitter: it must be made of a non-magnetic material). Otherwise this part will be magnetized, which has a negative impact on the separation.
The field depth of the magnet.
Type of magnet system in combination with the belt thickness. The optimal placement/position of the separation partition depends on the application.

 
Goudsmit has plenty of experience with this and will be happy to provide recommendations.

Design

Design

Magnetic head pulleys are made in standard sizes and can therefore be easily integrated into an existing installation. The shaft diameter, for example, is suitable for SNL bearing blocks, and the shaft journal (including keyway) is suitable for a standard SEW gear unit. These are global standards and therefore cover most applications. The modular design makes it easy to replace the shaft, which is ideal for maintenance and customer-specific solutions. Various versions available to meet your needs:

Belt width: 400-2000 mm
Diameters: 150-400 mm
Magnet system: both axial and radial magnet construction


Working principle

Working principle

A magnetic head pulley is a head or tail roller that is filled with magnets. This roller forms a magnetic system with a correspondingly rotating magnetic field that is active around the entire circumference. The magnetic field attracts ferromagnetic metal particles in a product flow. The conveyor belt that runs over the roller carries these particles with it to the underside of the roller. When they are no longer in range of the magnetic field they fall off the belt, where they are collected and/or carried away. For strongly magnetic particles, we can place cleats on the belt to 'push' the particles out of the magnetic field.
 
For damp or fine metal particles we fit a scraper to prevent them from sticking to the belt. The advantage of a head roller magnet is that it is a continuous system, so there is no need to stop the product flow to carry off the separated metal particles. This makes the head roller magnet very suitable for product flows with lots of Fe particles. Because the product passes very close to the magnet it is also a very powerful and effective separator.

ODD532 – ODD532R General features
ODD532 has 5 inputs for the connection of the push buttons or contacts for technical alarms.
It has 3 outputs 16A (of which 2 with exchange contact) suitable for lighting systems and 2 outputs for 6A lowpower loads as solenoid valves, motors for roller shutters and contactors
ODD532R has 5 inputs for the connection of the push buttons or contacts for technical alarms.
It has 3 outputs with 16A relay (of which two with exchange contact) suitable for lighting systems and twooutputs for low power loads 6A as solenoid valves, motors for roller shutters and contactors.
ODD532R  has a low profile which makes it suitable for installation in built-in junction boxes.
Electric features
Power supply by bus 24Vdc – 200mA
Inputs 5 digitals
Outputd 2 outputs 3 relays (230Vca -16A) – 2 relays (230Vca – 6A)

Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-3
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040631

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 63, Stroke 400, G 3/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Standard pressure gauge with front ring black, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0-2.5 bar, Ø40
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Short stroke cylinder, single-acting, Magnet, Piston Ø 32, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
Suitable for installation in limited spaces.
Supplied with magnet.
Suitable for filtered compressed air, lubricated (ensure continuity) or unlubricated.

3/2-way foot valve, monostable, non-engaging without foot guard, Connection M5, Operating pressure 2.5-10 bar, Temp. -10°C to 60°C
Foot-operated valves, 3/2- and 5/2-way types, bistable or monostable (non-latching).

Knurled nut, M16x1.5, for hose 8/10 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (170 °C), PFA
Perfluoroalkoxy alkane (PFA): A fluoroplastic with the same chemical resistance as PTFE but much stronger and suitable for temperatures up to 200°C.

Distributor, 2-fold, R 1/8 exterior, Outlets 2 x G 1/8 IT, nickel-plated brass, Max. operating pressure 60 bar, Max. Temp. 150 °C
Distributors, 2 outlets, nickel-plated brass

Female connector, G 3/8 i., Pipe exterior Ø 10, PN max. 315 bar, a/f1 19, a/f2 24, galvanised steel
Female connector, parallel thread, light type

Safety ring, for »speedfit« series, for pipe exterior Ø 15 mm, grey, POM

Timing belt pulley from steel T10 84 teeth belt width 32mm for taper bush 2517
Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 16477484

Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7 with keyway DIN 6885-1 on both sides
Material: Stainless Steel 1.4301
(X5CrNi1810). Needle bearings from bearing steel.

Max. Operating Angle 90°. The needle-bearing universal joints have
almost zero backlash, high accuracy and good turning properties. These
special needle-rollers without cage can take high loads even at large
operating angles. A special grinding process realizes a perfect
parallelism of the axes and the single parts of the joints - which
guarantees an extremely long service life.
Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199650N

Rubber buffer GH ø 20mm height 20mm with through hole 8,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572020

Suitable for belt width : 600 mm
RHP-B219A06-060-RSD-BA
SKU: RHAN22060000
Stock *: 0
Diameter: 219 mm
Magnet field strength (flux density) (±10%): 3000 gauss
Magnetic system: Permanent Neoflux® magnet
Magnetic head pulleys capture ferrous and weakly magnetic particles and continuously carry them away. Suitable for installation in existing belt conveyor systems, in the bulk transshipment or recycling industries for example.

Cost-effective and robust
With neodymium or ferrite magnets
Permanent magnet
Automatic cleaning (continuous)
According to your requirements

Application

Application

A magnetic head pulley, or head roller magnet, separates ferromagnetic particles, such as iron or steel, and even weakly magnetic particles (such as particles from processed stainless steel) from coarse to very fine fractions and carries them away completely automatically and continuously. This magnetic roller is built into an existing conveyor belt system as a head or tail roller. and is a cost-effective magnetic metal separator. It is important to feed the material onto the conveyor belt with the magnetic conveyor roller in a thin layer (ideally a mono-layer). Magnetic head pulleys require practically no maintenance, and because these magnets are integrated in an existing installation there are almost no extra operating and energy costs.
 
For larger layer thickness a head roller magnet can be combined with a suspension or overband magnet. In this configuration the suspended magnet draws the pieces of steel out of the upper layer and the head roller magnet draws them from the lower layers of the bulk flow. Magnetic head roller separators are particularly well suited for separation of problematic shapes such as ball bearings or batteries. They are used for:

recycling and/or recovery of ferrous metals
removing, purging or eliminating ferrous parts or weakly magnetic particles from product flows
protection of machines (prevention of damage caused by metal particles)


Placement

Placement

Keep the following in mind when integrating a magnetic head pulley:

Use of head scrapers is not possible. Otherwise iron particles would be scraped off before the magnet can separate them.
No steel components in the vicinity of the head roller magnet (such as the splitter: it must be made of a non-magnetic material). Otherwise this part will be magnetized, which has a negative impact on the separation.
The field depth of the magnet.
Type of magnet system in combination with the belt thickness. The optimal placement/position of the separation partition depends on the application.

 
Goudsmit has plenty of experience with this and will be happy to provide recommendations.

Design

Design

Magnetic head pulleys are made in standard sizes and can therefore be easily integrated into an existing installation. The shaft diameter, for example, is suitable for SNL bearing blocks, and the shaft journal (including keyway) is suitable for a standard SEW gear unit. These are global standards and therefore cover most applications. The modular design makes it easy to replace the shaft, which is ideal for maintenance and customer-specific solutions. Various versions available to meet your needs:

Belt width: 400-2000 mm
Diameters: 150-400 mm
Magnet system: both axial and radial magnet construction


Working principle

Working principle

A magnetic head pulley is a head or tail roller that is filled with magnets. This roller forms a magnetic system with a correspondingly rotating magnetic field that is active around the entire circumference. The magnetic field attracts ferromagnetic metal particles in a product flow. The conveyor belt that runs over the roller carries these particles with it to the underside of the roller. When they are no longer in range of the magnetic field they fall off the belt, where they are collected and/or carried away. For strongly magnetic particles, we can place cleats on the belt to 'push' the particles out of the magnetic field.
 
For damp or fine metal particles we fit a scraper to prevent them from sticking to the belt. The advantage of a head roller magnet is that it is a continuous system, so there is no need to stop the product flow to carry off the separated metal particles. This makes the head roller magnet very suitable for product flows with lots of Fe particles. Because the product passes very close to the magnet it is also a very powerful and effective separator.

ODD532 – ODD532R General features
ODD532 has 5 inputs for the connection of the push buttons or contacts for technical alarms.
It has 3 outputs 16A (of which 2 with exchange contact) suitable for lighting systems and 2 outputs for 6A lowpower loads as solenoid valves, motors for roller shutters and contactors
ODD532R has 5 inputs for the connection of the push buttons or contacts for technical alarms.
It has 3 outputs with 16A relay (of which two with exchange contact) suitable for lighting systems and twooutputs for low power loads 6A as solenoid valves, motors for roller shutters and contactors.
ODD532R  has a low profile which makes it suitable for installation in built-in junction boxes.
Electric features
Power supply by bus 24Vdc – 200mA
Inputs 5 digitals
Outputd 2 outputs 3 relays (230Vca -16A) – 2 relays (230Vca – 6A)

Clevis similar DIN 71752 size 4 x 16 right handed aluminum black anodized
Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed.
Article ID: 63766202

Chain tensioner SPANN-BOX® size 1 short low tensioning force 16 B-2
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040328

Ball head precision levelling adjuster MN 686.8 30-13.5 stainless steel
Material: X10CrNiS18.9, Nr. 1.4305. For non-parall surfaces up to 4° slope. Larger overall height with more adjustment travel. Without lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68699830

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 63, Stroke 600, G 3/8, Working pressure 1.5-10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Standard pressure gauge with front ring, black, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0-4 bar, Ø 40
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Round cylinder »MI«, double-acting, Magnet, Piston Ø 32, Stroke 15, G 1/8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Foot fastening, ISO 15552, ISO 21287, Piston Ø 125, 1 piece with 2 screws
Foot model

Quick-connect coupling I.D. 5 »connect line«, nickel-plated brass, Hose 8x6, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C
Low-priced, one-hand quick disconnect couplings, one side sealing, compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive, food technology.

Thread plug nipple »click-clock«, G 1/2 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
By combining these parts with unions, union elbows and union tees, you can obtain all essential connecting variants and simultaneously reduce your warehousing costs.

Bushing, Exterior hexagonal, G 1/2, AF 27, Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temperature 150 °C

Safety ring, for »speedfit« series, for pipe exterior Ø 18 mm, grey, POM

Timing belt pulley from steel T10 96 teeth belt width 32mm for taper bush 2517
Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 16477496

Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7
Material: Stainless Steel 1.4301
(X5CrNi1810). Needle bearings from bearing steel.

Max. Operating Angle 90°. The needle-bearing universal joints have
almost zero backlash, high accuracy and good turning properties. These
special needle-rollers without cage can take high loads even at large
operating angles. A special grinding process realizes a perfect
parallelism of the axes and the single parts of the joints - which
guarantees an extremely long service life.
Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199663

Suitable for belt width : 1000 mm
RHP-F254A06-100-RSD-BA
SKU: RHAF25100000
Stock *: 0
Diameter: 254 mm
Magnet field strength (flux density) (±10%): 1800 gauss
Magnetic system: Permanent ferrite magnet
Magnetic head pulleys capture ferrous and weakly magnetic particles and continuously carry them away. Suitable for installation in existing belt conveyor systems, in the bulk transshipment or recycling industries for example.

Cost-effective and robust
With neodymium or ferrite magnets
Permanent magnet
Automatic cleaning (continuous)
According to your requirements

Application

Application

A magnetic head pulley, or head roller magnet, separates ferromagnetic particles, such as iron or steel, and even weakly magnetic particles (such as particles from processed stainless steel) from coarse to very fine fractions and carries them away completely automatically and continuously. This magnetic roller is built into an existing conveyor belt system as a head or tail roller. and is a cost-effective magnetic metal separator. It is important to feed the material onto the conveyor belt with the magnetic conveyor roller in a thin layer (ideally a mono-layer). Magnetic head pulleys require practically no maintenance, and because these magnets are integrated in an existing installation there are almost no extra operating and energy costs.
 
For larger layer thickness a head roller magnet can be combined with a suspension or overband magnet. In this configuration the suspended magnet draws the pieces of steel out of the upper layer and the head roller magnet draws them from the lower layers of the bulk flow. Magnetic head roller separators are particularly well suited for separation of problematic shapes such as ball bearings or batteries. They are used for:

recycling and/or recovery of ferrous metals
removing, purging or eliminating ferrous parts or weakly magnetic particles from product flows
protection of machines (prevention of damage caused by metal particles)


Placement

Placement

Keep the following in mind when integrating a magnetic head pulley:

Use of head scrapers is not possible. Otherwise iron particles would be scraped off before the magnet can separate them.
No steel components in the vicinity of the head roller magnet (such as the splitter: it must be made of a non-magnetic material). Otherwise this part will be magnetized, which has a negative impact on the separation.
The field depth of the magnet.
Type of magnet system in combination with the belt thickness. The optimal placement/position of the separation partition depends on the application.

 
Goudsmit has plenty of experience with this and will be happy to provide recommendations.

Design

Design

Magnetic head pulleys are made in standard sizes and can therefore be easily integrated into an existing installation. The shaft diameter, for example, is suitable for SNL bearing blocks, and the shaft journal (including keyway) is suitable for a standard SEW gear unit. These are global standards and therefore cover most applications. The modular design makes it easy to replace the shaft, which is ideal for maintenance and customer-specific solutions. Various versions available to meet your needs:

Belt width: 400-2000 mm
Diameters: 150-400 mm
Magnet system: both axial and radial magnet construction


Working principle

Working principle

A magnetic head pulley is a head or tail roller that is filled with magnets. This roller forms a magnetic system with a correspondingly rotating magnetic field that is active around the entire circumference. The magnetic field attracts ferromagnetic metal particles in a product flow. The conveyor belt that runs over the roller carries these particles with it to the underside of the roller. When they are no longer in range of the magnetic field they fall off the belt, where they are collected and/or carried away. For strongly magnetic particles, we can place cleats on the belt to 'push' the particles out of the magnetic field.
 
For damp or fine metal particles we fit a scraper to prevent them from sticking to the belt. The advantage of a head roller magnet is that it is a continuous system, so there is no need to stop the product flow to carry off the separated metal particles. This makes the head roller magnet very suitable for product flows with lots of Fe particles. Because the product passes very close to the magnet it is also a very powerful and effective separator.

ODD08 General features
On the front panel there are 8 push buttons for outputs activation.
Due to its small size, only 5 DIN modules, it can be easily installed in any switchboard.
The output contacts are normally open without common pole and are suitable to control resistive loads up to 12A.
Every single relay stands up to 120A peak and requires no external contactors for lighting control.
Electric features
Power supply by Bus 24Vcc – 180mA
Output 8 relays (230Vca – 12A – AC1)

Clevis similar DIN 71752 size 6 x 12 right handed aluminum black anodized
Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed.
Article ID: 63766205

Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-2
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040428

Clamp collar double-split stainless steel 1.4305 bore 65mm with bolts DIN 912 A2-70
Material: Stainless steel 1.4305. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of nylon. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.
Article ID: 62399465

Service unit 3-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.1 - 1 bar, Semi
Three-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Standard pressure gauge with front ring, black, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0-6 bar, Ø 40
Bourdon-tube pressure gauge in standard design,
either with panel-mounting bezel made of chrome-plated or black sheet steel or
with 3-hole bezel made of chrome-plated sheet steel.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 40, Stroke 25, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Thread plug nipple, G 1/4 o. , Plug connenction Ø 6 mm, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Quick-connect coupling I.D. 5 »connect line«, nickel-plated brass, Hose 6x4, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C
Low-priced, one-hand quick disconnect couplings, one side sealing, compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive, food technology.

Protective cap for swing safety couplings »R-SC« DN 7.2 and DN 8, polyamide unbreakable

Double threaded nipple G 1 exterior, G 1 exterior, AF 41, Thread cylindrical acc. to DIN EN ISO 228-1, nickel-plated brass
Suitable for air, water, oil, steam, etc.

Replacement sieve for dirt strainers made of brass, for connection size G 1/4, 3/8, 1/2, mesh width 0.5 mm, DN 8

Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7 with keyway DIN 6885-1 on both sides
Material: Stainless Steel 1.4301
(X5CrNi1810). Needle bearings from bearing steel.

Max. Operating Angle 90°. The needle-bearing universal joints have
almost zero backlash, high accuracy and good turning properties. These
special needle-rollers without cage can take high loads even at large
operating angles. A special grinding process realizes a perfect
parallelism of the axes and the single parts of the joints - which
guarantees an extremely long service life.
Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199663N

Suitable for belt width : 650 mm
RHP-F324A08-065-RSD-BA
SKU: RHAF32065000
Stock *: 0
Diameter: 324 mm
Magnet field strength (flux density) (±10%): 1800 gauss
Magnetic system: Permanent ferrite magnet
Magnetic head pulleys capture ferrous and weakly magnetic particles and continuously carry them away. Suitable for installation in existing belt conveyor systems, in the bulk transshipment or recycling industries for example.

Cost-effective and robust
With neodymium or ferrite magnets
Permanent magnet
Automatic cleaning (continuous)
According to your requirements

Application

Application

A magnetic head pulley, or head roller magnet, separates ferromagnetic particles, such as iron or steel, and even weakly magnetic particles (such as particles from processed stainless steel) from coarse to very fine fractions and carries them away completely automatically and continuously. This magnetic roller is built into an existing conveyor belt system as a head or tail roller. and is a cost-effective magnetic metal separator. It is important to feed the material onto the conveyor belt with the magnetic conveyor roller in a thin layer (ideally a mono-layer). Magnetic head pulleys require practically no maintenance, and because these magnets are integrated in an existing installation there are almost no extra operating and energy costs.
 
For larger layer thickness a head roller magnet can be combined with a suspension or overband magnet. In this configuration the suspended magnet draws the pieces of steel out of the upper layer and the head roller magnet draws them from the lower layers of the bulk flow. Magnetic head roller separators are particularly well suited for separation of problematic shapes such as ball bearings or batteries. They are used for:

recycling and/or recovery of ferrous metals
removing, purging or eliminating ferrous parts or weakly magnetic particles from product flows
protection of machines (prevention of damage caused by metal particles)


Placement

Placement

Keep the following in mind when integrating a magnetic head pulley:

Use of head scrapers is not possible. Otherwise iron particles would be scraped off before the magnet can separate them.
No steel components in the vicinity of the head roller magnet (such as the splitter: it must be made of a non-magnetic material). Otherwise this part will be magnetized, which has a negative impact on the separation.
The field depth of the magnet.
Type of magnet system in combination with the belt thickness. The optimal placement/position of the separation partition depends on the application.

 
Goudsmit has plenty of experience with this and will be happy to provide recommendations.

Design

Design

Magnetic head pulleys are made in standard sizes and can therefore be easily integrated into an existing installation. The shaft diameter, for example, is suitable for SNL bearing blocks, and the shaft journal (including keyway) is suitable for a standard SEW gear unit. These are global standards and therefore cover most applications. The modular design makes it easy to replace the shaft, which is ideal for maintenance and customer-specific solutions. Various versions available to meet your needs:

Belt width: 400-2000 mm
Diameters: 150-400 mm
Magnet system: both axial and radial magnet construction


Working principle

Working principle

A magnetic head pulley is a head or tail roller that is filled with magnets. This roller forms a magnetic system with a correspondingly rotating magnetic field that is active around the entire circumference. The magnetic field attracts ferromagnetic metal particles in a product flow. The conveyor belt that runs over the roller carries these particles with it to the underside of the roller. When they are no longer in range of the magnetic field they fall off the belt, where they are collected and/or carried away. For strongly magnetic particles, we can place cleats on the belt to 'push' the particles out of the magnetic field.
 
For damp or fine metal particles we fit a scraper to prevent them from sticking to the belt. The advantage of a head roller magnet is that it is a continuous system, so there is no need to stop the product flow to carry off the separated metal particles. This makes the head roller magnet very suitable for product flows with lots of Fe particles. Because the product passes very close to the magnet it is also a very powerful and effective separator.

ASE General features
Aluminium alloy body.
Stainless steel 4-blade propeller.
Clutch shaft mounted on sealed ball bearings.
Output connections with shockproof thermoplastic cable gland G 1/2” .
Storage and transport temperature: -25 ÷70°C.
Unit weight: 2.2 Kg.
Electric features
Synchronous motor: 4.5VA, supply voltage 230Va.c. 50Hz.
2 SPDT microswitches : one for motor control, one for operation.
Rated insulation voltage Ui 380V~
Continuous duty rated current Ith  10A

hose clamp DIN 3017-1 type W1 steel zinc plated diameter range 70-90mm band width 9mm
Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request.
Article ID: 63811090

Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-3
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040635

Gear rack made of POM module 2 tooth width 16mm height 16mm length 1500mm
Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm.
Article ID: 29660700