Ball screw spindle rolled 8x2mm length 1000mm
Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with Maedler® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Article ID: 64008023

Hydraulic coupling locking on both sides, Stainless steel 1.4305, G 1/2 IT, I.D. 11, Operating pressure max. 250 bar
Hydraulic couplings, both sides sealing, for liquid media acc. to ISO 7241, B Series.

Areas of application: machine and plant engineering, manufacturing industry, chemical / pharmaceutical industry, automotive, food technology.

Fork head, »Y« type (incl. thread adapter), for compact cylinder »ACP«, Piston Ø 20, Piston rod thread M5x0.8 i.
Fork model, »Y« type (incl. threaded adapter)

Polycarbonate container incl. protective cage, with fully-automatic condensate drain (NC), for »FUTURA«, Size 1, G 1/4 and G 3/8

3/2-way valve, Pneumatic, »3A«, bistable, G 1/8, Operating pressure 1.5 - 8 bar, Temperature range max. 70 °C
3/2-way pilot valves
- Pneumatic -

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/8, Goods class 2.5, Measurement range 0-4 bar/60 psi, Ø 40
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Screw-on hose connector, G 1/2 i., for hose I.D. 12 mm, AF 24, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Adjustable L screw conn., cone seal, 360° swivel range, female nut M14x1.5 i., Pipe ext. Ø 8, PN max. 315 bar, galvanised steel

Safety ring, for »speedfit« series, for pipe exterior Ø 12 mm, red, POM

High performance V-belt XPB EPDM datum length 2000 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPB are a useful substitute for SPB and 17.
Width b = 16.3 mm.

Height h = 13 mm.

Smallest medium pulley diametre = 112 mm.

Weight per Metre 0.183 kg.

Article ID: 15492000

Pneumatic shuttle valve

Length : 260 mm
SVM-N-158x32-0200-F-F1M
SKU: SVMN030200
Stock: 4
Type: VMN3 (with flange)
Advised max. installation height: - (n/a) mm
Neodymium magnetic plates are extremely powerful, compact and lightweight. They are suitable for separation of ferrous contaminants from 30 µm to 3 mm.Completely stainless steel and watertight. Suitable for the food industry.

Neodymium GSN-35, Br 11,200 gauss (at 20 °C), Tmax. 80 °C
Capture Fe particles from 30 µm
Manual cleaning (wipe off)
Completely stainless steel and watertight
Max. holding field 180 mm

Application

Small ferrous contaminants / lightweight / food

Neodymium magnetic plates are extremely powerful, compact and lightweight. They are used when ferromagnetic (Fe) particles smaller than 3 mm must be separated. Completely stainless steel and watertight. Suitable for the food industry.
 
You can easily hang them suspended above a conveyor belt yourself, attach them to the wall of a product channel, or mount them under a passing product stream. For dust-tight installation against the wall of a free-fall pipe channel, we also supply neodymium plate magnets including a mounting plate and quick-cleaning mechanism (see chute magnets).
 
If the product comes in direct contact with the magnet, we recommend type 3; this has an extremely high field strength at the magnet yet a compact field, which also makes it ideal for capturing weakly magnetic particles, such as stainless steel scrapings. Type 2 was developed for overbelt placement or installation in a free-fall line with mounting plate.
 
* Note: If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

Magnet quality: N-35
Completely stainless steel housing
Watertight
Smooth finished weldings
Finish: grit blasted


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

Cleaning of the plate magnet is performed manually by wiping, or through use of a hinged extractor plate for quick-cleaning. You can swing the hinged extractor plate away from the magnet. The ferrous particles fall off of the extractor plate as soon as they are moved far enough away from the magnet.
 
For plate magnets including mounting plate and hinged cleaning construction: see also 'chute magnets'.

P81 General features
Light signals:  1 red LED, power supply ON; 1 yellow LED, failure; 1 red LED, gas alarm.
Acoustic signals: 1 buzzer with sound intensity > 60db at 1m
1 button to reset the alarms and for testing the probe.
Self-extinguishing plastic housing.
Dimensions: 105 x 90 x 58 mm – 6 modules complies with DIN 43880 standard.
Unit weight: 0.185 kg.
Rear panel mounting on Omega DIN EN 50022 rail.
Protection: IP20; IP40 when is properly installed in an electrical box.
Environment temperature: 0 ÷ 50 °C.
Environment humidity ±90% U.R. without condensation.
Electric features
Power supply: 12 Vac/dc ± 10%.
Absorption: approximately 160mA (320mA) with a single probe; 460mA (620mA) with faulty probe and output.
Connection with 2 terminals of 2.5 mm².
Protection: input – fuse power supply 1A 5x20mm.
1 input for sensors S81, S82, S83, or probes ATEX S84, S85, S86 (different gas types).
Connection to the probe with 3 terminals of 2.5 mm²: C (-12…24V); S (+4…20mA); A (+12…24V).
Maximum connection length 50 m.
Section of 3 conductors: 1.5 mm².
Alarm output: n.1 relay with 1 SPDT contact 8A 250Vac.
Failure output: n.1 open collector 12Vdc / 300mA max.
Outputs connections: n.3 terminals of 2.5 mm² for relay C-NC-NO; n.2 terminals of 2.5 mm² for open collector.

nut DIN 934 A2 M10 RH
Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65299010

Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-2
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040325

Linear ball bearing unit KG-1 ISO series 1 with double rubber seals for shaft diameter 30mm stainless
Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals.
Article ID: 64699630

Filter regulator »FUTURA«, with metal container, Viewing tube, Pressure gauge, 5 µm, Size 2, G 3/8, Control range 0.1-1 bar, Fully
Filter regulators with excellent flow rates in modern design.
The regulator knob can be latched and locked.

Fork head, »Y« type (incl. thread adapter), for short stroke cylinder »ACQ« and »ASQ«, Piston Ø 20, Piston rod thread M5x0.8 i.
Fork model, »Y« type (incl. threaded adapter)

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 40, Stroke 20, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way valve, Pneumatic, »3A«, bistable, M5, Operating pressure 1.5 - 8 bar, Temperature range max. 70 °C
3/2-way pilot valves
- Pneumatic -

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/8, Goods class 2.5, Measurement range 0-1.6 bar/23 psi, Ø40
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Screw-on hose connector, G 1/2 i., for hose I.D. 13 mm, AF 24, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Double threaded nipple, R 3/8 o., R 1 o., AF 36, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Pipe clamp, for »speedfit« series, Polypropylene, for pipe exterior Ø 15 mm, blue, Operating temp. max. 90 °C, PN max. 12 bar
For fastening rigid PA or aluminium pipes to the wall.

High performance V-belt XPB EPDM datum length 2020 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPB are a useful substitute for SPB and 17.
Width b = 16.3 mm.

Height h = 13 mm.

Smallest medium pulley diametre = 112 mm.

Weight per Metre 0.183 kg.

Article ID: 15492020

Pneumatic shuttle valve

Diameter : 135 mm
SMR-N-D120x50-02E-S4-S
SKU: SEMR012078
Stock: 10
Magnet quality: Neodymium GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C
No of bars: 2
Weight: 1.2 kg
Magnetic grids - also called magnetic grates - are often placed at a pouring point or receiving hopper. They filter very fine magnetic and even weakly magnetic ferrous contaminants from free-flowing powders and granulates.Often used for control purposes.Manual quick-cleaning by extractor.

Optimal magnet contact
Low overall height
Capture Fe particles from 30 µm
Max. particle size 10 mm
With neodymium magnetic bars

Application

In pouring points, hoppers, as inspection before bagging, etc.

Magnetic grids filter very fine magnetic and weakly magnetic ferromagnetic contaminations from free-flowing powders and granulates. Often used for control purposes. Manual cleaning (quick cleaning).
 
They are used for applications in the plastics, food, pharmaceutical, ceramics and other industries. In the hopper of your injection moulding machine, for protection of your installation or as final inspection of your product, e.g. just prior to bagging.
 
Magnetic grids consist of several very powerful Neoflux® (neodymium) magnetic bars. These are located in the middle of your product flow and therefore even capture the smallest ferrous particles, down to 30 microns. Even stainless steel scrapings are captured. These particles are so small that they cannot even be detected by a metal detector.
 
An effective use is to place two magnetic grids in a cascade configuration, so the product flowing past them must contact the magnetic bars or at least pass extremely close to them. We also use this method with our Cleanflow magnets (grids in housing).

Design

Construction & materials data

Goudsmit magnetic grids are available in square and round.
 
The neodymium magnetic bars are provided with enveloping extractor tubes. This makes the grate robust and manual wiping unnecessary. By pulling the magnetic bar unit from the extractor tubes, the captured ferrous contaminants will fall off automatically. We call this 'manual quick-cleaning'.
 
The extractor tubes also serve to protect the magnetic bars, making them last longer.
 

Magnet quality: neodymium N-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (8,000 gauss on tube Ø25)
Materials - in contact with product: AISI304 (RVS 1.4301) / AISI316 (SS 1.4401)


Iron discharging / cleaning

Filtering & discharging of ferrous contaminants

The procedure for discharging the filtered ferrous particles is as follows:

stop the product flow
remove the entire grid from the product chute or hopper and place it on a pre-cleaned, non-magnetic surface (e.g. wood, aluminium or stainless steel)
remove the retainer for the two grid parts
pull the magnetic bars unit out of the extractor housing
the captured metal particles now fall off the extractor tubes. Make sure you keep the magnet bars away from these magnetic metals during this procedure.
lay the part with the magnetic bars on another well-cleaned surface
now make sure you also place the magnetic bars far enough away from the magnetic particles.
dispose of the metal contaminants
if necessary: clean all the grid parts with a dry cloth and/or suitable stainless steel cleaning fluid
mount the two grid parts and the retainer
place the grid back in the product chute or hopper
restart the product flow.

K17C General features
Cable composition:– 2 conductors in solid copper and tinned copper– Outer sheath in pvc– Aluminium foil shielding– Tinned copper sheath
The heating cable includes:– 1 standard length of heating cable– 2 cold tails
Minimum installation room temperature 5 °C
Maximum room temperature 65 °C
Minimum storage room temperature -20 ÷ -25°C
Electric features
Power supply 230V-50Hz
Constant power delivered ~17W/m
Total power absorbed at 230V:– K17C29 510 W– K17C73 1260 W– K17C82 1530 W– K17C102 1750 W– K17C129 2200 W

nut DIN 934 A4 M10 RH
Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65299110

Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-2
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040421

Linear ball bearing unit KG-1 ISO series 1 with shields for shaft diameter 30mm stainless
Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals.
Article ID: 64699530

Filter regulator »FUTURA«, with metal container, Viewing tube, Pressure gauge, 5 µm, Size 2, G 3/8, Control range 0.1-2 bar, Fully
Filter regulators with excellent flow rates in modern design.
The regulator knob can be latched and locked.

L-multi-distributor 3-fold »click-clock«, rotating, G 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Short stroke cylinder »ASQ« single-acting, Magnet, Piston Ø 50, Stroke 15, G 1/4, Working pressure 2-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Basic ejector »SBP«, High under-pressure, Silencer, Nozzle size 0.5 mm, Compressed air / vacuum connection 4 mm, PN max. 4.5 bar
Purely pneumatic vacuum generator that operates on the Venturi principle.
Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.

Properties:
Vacuum generator without control valves or system monitoring functions,?with a high maximum vacuum value (85%)No moving parts, which means no wear and no maintenanceMaximum suction capacity with minimum compressed air consumptionMinimum size, low weightFor decentralised vacuum generation in highly dynamic processes

Applications:
For universal use in lightweight gripper systems to handle air-tight workpieces
as well as for automatic separation systems, e.g. in the plastics, electronics
and packaging industries. Also ideal for the construction of ejector blocks for
decentralised control of suction pads.

Standard pressure gauge »pressure line« Connection, rear, centric, G 1/8, Goods class 2.5, Measurement range 0-2.5 bar/36 psi, Ø40
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight screw-in fitting, G 1/8 o., Pipe exterior Ø 8 mm, PN bar 315, A/F1 17, A/F2 14, galvanised steel
Male connector, parallel male thread, light type

GEKA hose piece, rigid, Potable water, bright brass, G 3/8 i., Operating pressure max. 40 bar, Medium/ambient temp. -10°C to 90°C
GEKA-Kupplungen für Trinkwasser, Serie »GEKA-plus«, Messing blank, mit KTW-Zulassung

Pipe clamp, for »speedfit« series, Polypropylene, for pipe exterior Ø 28 mm, white, Operating temp. max. 90 °C, PN max. 12 bar
For fastening rigid PA or aluminium pipes to the wall.

High performance V-belt XPB EPDM datum length 2040 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPB are a useful substitute for SPB and 17.
Width b = 16.3 mm.

Height h = 13 mm.

Smallest medium pulley diametre = 112 mm.

Weight per Metre 0.183 kg.

Article ID: 15492040

Pneumatic shuttle valve

Belt type : 1.3 mm Polyurethane antistatic, blue, with 1 cleat (A-shaped)
BELT 1.3MM PU RHFH800 2544x101
SKU: 45.1800087
Stock: 2
Suitable for belt width: 800 mm
Spare conveyor belts, to replace worn or damaged conveyor belts of Goudsmit eddy current, overband or high gradient magnetic head pulleys.

Fast delivery
Quick and efficient
Long service lifespan
High quality components
Prevents production downtime

ECCM42 General features
The calculator features separate sections able to simultaneouslyrecord the following:• thermal energy in a heating circuit;• thermal energy in a cooling circuit;• sanitary cold water volume;• sanitary hot water volume.
The unit has been designed to facilitate the installation and reduce the time needed for the commissioning operations.
The ECCM42 unit is equipped with a wired “M-Bus” interface and a wired “Local-bus” interface that allow the user to read, by means of compatible equipment, the consumption from inside one’s own apartment.
Ambient operating temperature: +5 ÷ +55 °C
Storage temperature: -20 ÷ +55 °C
Dimensions: 141 x 77,5 x 47 mm
Degree of protection: IP52
Environmental class: A (E1, M1)
Maximum value of thermal power: 33000 kW with a pulse rate < 100 l/pulse; 330000 kW with a pulse rate ≥ 100 l/pulse
Temperature measurement range: 2 ÷ 150°C (Θmin=2°C Θmax=150°C)
Temperature difference: 3 ÷ 148°C (ΔΘmin=3°C ΔΘmax=148°C)
Heating/cooling switching: According to the sign of temperature difference between sensors (ΔΘ); in any case, no energyrecording takes place in case of –3°C < ΔΘ < +3°C
Display unit features: Liquid crystal display (LCD) with 8 digits, 19 icons and 2 auxiliary digits
Energy measurement unit on the LCD: MWh (standard), configurable kWh, MJ and GJ
Type of sensors: Pt500 sensors pairs with 2-wire lead (Platinum precision resistor, IEC 60751 compliant)
Type of sensor cables: Unshielded
RMS Sensor current value: < 72 µA (measurements made every 30 seconds)
Pulse inputs: Two inputs for the heating/cooling flow meters; two inputs for the sanitary water flow meters
Pulse inputs class: IB (in accordance with the EN 1434-2 Standard)
Pulse inputs circuit type: Pull-up (1 MΩ) with reference to ground (GND terminal); voltage: +3.6 V
Pulse input compatibility: Flow Meters with class OA (reed output) and class OC (open-collector) pulse outputs
Max. frequency / Pulse min. duration: 5Hz – 100ms
Flow Meter installation position: Return (standard), configurable on the forward
Pulse rate: 1 – 2,5 – 10 – 25 – 100 – 250 – 1000 – 2500 litres/pulse
Heat carrier fluid: Water (standard), configurable for water and glycol solution
M-Bus communication interface: Compliant to EN 1434-3, with galvanic separation
M-Bus baud rate: 2400 baud (standard), also configurable to 300 or 9600 baud
Type of cable for M-Bus connection: Telephone cable J-Y(ST) Y2 x 2 x 0,8mm²
Local Bus interface: Compliant to EN 13757-6, 2400 baud, proprietary unidirectional protocol
Type of cable for Local Bus connection: Two wire cable (2 x 0.6mm², max. length: 50m)
Billing recording: 12 fixed monthly recordings, two periods with programmable dates (DD/MM)
Anomaly/alarm recording: Circular log, four events (type of event and date)
Other recordings: Heat carrier fluid max. flow rate and max. power
Type of connections: Removable, 18-pole terminal block (5mm pitch)
Electric features
Power supply: battery-operated
Battery rated voltage: 3,6V
Tipo di batteria: Lithium-thionyl chloride
Type of battery: Pre-wrapped package (2xAA – capacity: 4.8 Ah – spare part code: 1592269)
Battery life: 10 years operation + 1 year stock

Plug with sealing ring thread G1/4A
Material: Brass, nickel-plated. Sealing ring from aluminium.
Article ID: 86590028

Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-2
Material: Housing from steel, zinc-plated, black lackered. Chain rider from low pressure polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040425

Spherical bearing DIN 12240-4-K type S with outer ring relubricateable bore 25mm outer diameter 56mm stainless steel == Initial lubrication required before use ==
Material: Inner ring stainless steel 1.4034, hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305.Dimensions according to DIN 648 / 12240-1 series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D).
Article ID: 63399025

Filter regulator »FUTURA«, with metal container, Viewing tube, Pressure gauge, 5 µm, Size 2, G 3/8, Control range 0.2-4 bar, Fully
Filter regulators with excellent flow rates in modern design.
The regulator knob can be latched and locked.

L-multi-distributor 3-fold »click-clock«, rotating, G 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Compact cylinder »ACP«, double-acting, Piston Ø 50, Stroke 20, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

2/2-way solenoid valve brass, NC, directly operated, 230V, 50Hz, 5VA, Medium temp. -10°C to 140°C, FPM, G 1/8, PN 0 - 6bar
Economy series available in three different versions

- Directly operated
- Combined operation
- Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Standard press. gauge »pressure line« Connection, rear, centric, G 1/8, Goods class 2.5, Measurement range -1/0 bar/-14.5 psi, Ø40
Low-priced series of standard pressure gauges available in all popular diameters with the most frequently requested measuring ranges.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Push-in L-fitting »click-clock«, rotating, M5 o., for hose exterior Ø 5 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Adjustable male connector, G 1/2 o., Pipe exterior Ø 12, PN 630, a/f1 27, a/f2 24, galvanised steel

Pipe clamp, for »speedfit« series, Polypropylene, for pipe exterior Ø 15 mm, red, Operating temperature max. 90 °C, PN max. 12 bar
For fastening rigid PA or aluminium pipes to the wall.

High performance V-belt XPB EPDM datum length 2060 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPB are a useful substitute for SPB and 17.
Width b = 16.3 mm.

Height h = 13 mm.

Smallest medium pulley diametre = 112 mm.

Weight per Metre 0.183 kg.

Article ID: 15492060

2 ways modulate pneumatic valve

Size : 160 mm
HGR-SQ-160-FL-F-G-S
SKU: TPGC160078
Stock: 7
Max. tear off force: 3500 N
Advised working load: 1170 N
With magnetic grippers, you automatically pick up flat steel products or sheets up to 10 mm thick. They are quick and easy to switch, and specially designed for transferring, placing or positioning using a robotic arm.Magnetic grippers serve as end of arm tooling for sheets. They even hold perforated sheets effortlessly.

For sheets up to 10 mm thick
Switching: pneumatic
For robot End-of-arm tooling
Lifting power: up to 45 kg
Permanent magnet

Application

End of arm tooling

Magnetic grippers are ideal when you want to pick up, place or position flat, steel products with a robot. The applications are very diverse, such as:

pick-and-place of steel parts
handling perforated sheets with a robot arm
unstacking workpieces from crates (bin picking)
positioning sheets in presses
stacking or unstacking hot baking tins

The high temperature gripper is suitable for this last example. For example, you can also use it to load and unload high-grade steel in a press; it is formed at high temperatures.


Operation

Switching and control of the magnet gripper

The magnet gripper switches pneumatically. This moves the magnetic field and switches it on and off.
Control can be with a 5/3 or possibly a 5/2 valve.
An activated magnet gripper does not release its load, even if the air pressure or power supply is lost. This makes it a safe and reliable end-of-arm solution.

Practical tips

Things to look out for when using magnetic grippers:
When working with thin sheets (≤1 mm) you must consider the ‘peeling off effect’. This reduces the maximum breakaway force. In this situation, it is better to create a construction with multiple smaller grippers (e.g. 40 x 40 mm) than one or two large grippers.
A sheet can be damaged when the gripper contacts the sheet. If this is a problem, choose the version with a protective polyurethane cap (friction type).
When working with oiled sheets or with high acceleration of the robotic arm, a sheet can shift position. This, too, can be prevented through use of the type with a polyurethane friction pad.
Sometimes the surface of a sheet is not flat, so the vacuum does not work. In this case, magnetic grippers are an ideal solution. The more contact surface area the better, but a magnet gripper always works on ferromagnetic steel. Thus on round shapes too.
The vacuum does not work when there are holes in the sheet; the magnet gripper does. In this case, choose a gripper with larger dimensions than the hole, and test the chosen solution thoroughly.
For small workpieces, Goudsmit has very small grippers in the assortment. They have a low overall height and give extra strength to hold the workpiece in place. For example, choose type HGR-RO-020.
For thin sheets (≤4 mm) and oily sheets that stick together, the robot sometimes picks up several sheets together. Sheet separators prevent this. They are available both in permanent and pneumatically switchable versions.

O34 General features
Direction of rotation selectable by wiring
Manual operation: button and handle
Strength: min. 10 Nm (at nominal voltage)
Rotation angle electronically limited to 90 °
280 sec rotation time
Sound level max 35 db (A)
Reversible scale position indication 0 ÷ 1
Mounting position all except engine below
Protection class II
Ambient temperature 0 ÷ 50 ° C
Storage temperature -10 ÷ 80 ° C
Weight 500 g
Protection degree IP40
Electric features
Rated voltage AC 230V 50 / 60Hz.
Sizing 3.5VA.
Power consumption 3.5W.
Connection with screw terminals.

Planetary small geared motor SFP 3 with DC-motor 24V i=422:1 idle speed 8,5 1/min. nominal torque 5 Nm
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43039124

Spherical bearing DIN 12240-4-K type SD with outer ring maintenance-free bore 25mm outer diameter 56mm stainless steel
Material: Inner ring stainless steel 1.4034, hardened, ground and polished. Bearing shell stainless steel 1.4571, with PTFE-lining. Outer ring stainless steel 1.4305. Dimensions according to DIN 648 / 12240-1 series K (wide version). Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D).
Article ID: 63399125