High performance V-belt XPA EPDM datum length 1707 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291707

Frequency:50 Hz
Speed:2870 1/min
Shaft Output:871 W
Volume Flow:428 m³/h
Pressure:Δp s4236 Pa
Pressure:Δp t4367 Pa
Density:43862 kg/m³
Sound Pressure:83 dB(A)

5-ways solenoid valve

PKD General features
Kits composed of Sicurgas gas leak detectors P21 – P22 and safety solenoid valves normally open or normally closed.
Available for methane gas and LPG detection.
Electric features
Shockproof insulating material casing.
Internal visual and acoustic alarms.
Sicurgas has three warning lights: green LED – indicates that the detector works properly, yellow LED – indicates detector failure, red LED – indicates the gas presence in the environment (ALARM).
Semiconductor sensor for gas detection (can be replaced).
Sensor life time approximately 5 years from installation.
The used relay is sealed and filled with inert gas, which ensures in any case the absolute absence of sparks during switching phases.
Internal switch for choosing the functioning mode of the relay: stable or impulse.

Neoprene timing belt HTD 14M width 55mm Lw 1610mm 115 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17731700

Precision double universal joint WDR DIN 808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301
Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63199729N

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 80, Stroke 30, G 3/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Inline-filter »filter plug«, R 3/8, Working pressure max. 10 bar, Temperature range 0 °C to 90 °C, nickel-plated steel
For mounting on pneumatic tools and protecting them against impurities, especially in dirty or dusty working environments.

Inline filters
- Extend the service life of the tool
- Do not impair the flow
- Assure the oil mist supply to the tool

Designed for use with standard DN 7.2 couplings.

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 32, Stroke 45, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Wear part set, for combi-service unit, Size 1, G 1/4, G 3/8 and G 1/2

Bellows suction cup, Round 1.5 folds, Material NBR, »FGA«, ø 25 mm, suitable connection nipple IT G 1/8, ET G 1/8
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very stiff top foldSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with?uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Foot fastening, ISO 6432, Piston Ø 8 to 10, galvanised steel, 1 piece
Foot model

Mini ball valve, Sand blasted, nickel-plated brass, Butterfly handle, Medium/ambient temp. -10°C to 90°C, G 3/8 IT, PN max. 10 bar

Push-in L-fitting »Blue Series« mini, Long, rotating, M6, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.

Hexagon nut DIN 934 steel strength 8 zinc-plated thread M12 left handed
Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65231200

High performance V-belt XPA EPDM datum length 1732 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291732

Frequency:50 Hz
Speed:2920 1/min
Shaft Output:1661 W
Volume Flow:859 m³/h
Pressure:Δp s4428 Pa
Pressure:Δp t4788 Pa
Density:43862 kg/m³
Sound Pressure:85 dB(A)

5-ways solenoid valve

Length : 220 mm
HDHH-B-33x220
SKU: EDAR032002
Stock: 10
Power supply: 230 V AC; 50/60 Hz
Demagnetizing tools and machine parts in difficult-to-reach places.Application: in workshops, tool-making shops, machine construction and for watch repairs.

Accurate
Max. penetration depth 10 mm (single sided)
Stainless steel enclosure
Incl. mains lead

PKD General features
Kits composed of Sicurgas gas leak detectors P21 – P22 and safety solenoid valves normally open or normally closed.
Available for methane gas and LPG detection.
Electric features
Shockproof insulating material casing.
Internal visual and acoustic alarms.
Sicurgas has three warning lights: green LED – indicates that the detector works properly, yellow LED – indicates detector failure, red LED – indicates the gas presence in the environment (ALARM).
Semiconductor sensor for gas detection (can be replaced).
Sensor life time approximately 5 years from installation.
The used relay is sealed and filled with inert gas, which ensures in any case the absolute absence of sparks during switching phases.
Internal switch for choosing the functioning mode of the relay: stable or impulse.

Neoprene timing belt HTD 14M width 55mm Lw 1778mm 127 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17732000

Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm
Material: Steel, zinc-plated and chromated. - High-quality version. - The slipping torque can be adjusted with common assembly tools for screws, also after mounting. - By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately). - The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. Required bush length: The bush length required depends on the width of the component to be joined. To calculate the bush length take the width of the component and add 1.5 times the thickness of the friction disc, plus an additional 0.5mm. Bush length in mm = 1.5 x s + b + 0.5.
Article ID: 61210010

Glycerine pressure gauge, front ring, Connection, rear, eccentric, G 1/2, Goods class 1.0, Measurement range 0 - 25 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with panel-mounting bezel
made of chrome-plated and polished steel.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Reducing piece PP, Supports 32/28 mm, Working pressure max. 12 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

3/2-way valve »FUTURA«, pneumatically actuated, Size 1, G 1/4, Exhaust G 1/4, Input pressure max. 16 bar, Temp. -10 °C to 50 °C
Pneumatic systems or parts of systems can be switched on and off by means of an pneumatic signal.
3/2-way type including silencer.
When they are switched off, the system is exhausted at the same time.

Safety ball valve, not lockable, with venting hole, nickel-plated brass, Operating temp. max. 60°C, Rp 3/4, DN 20, PN max. 12 bar
Brass safety ball valves.
Specially designed for pneumatic applications.
The ball valve shuts off the supply side and relieves the application into the atmosphere.

Coupling nut, M14x1, for hose 10/8 mm, AF 16, Pressure range max. 25 bar, Temperature -40 °C to 200 °C, Stainless steel 1.4404
Supplied without seals. For use with corrosive media and at high temperatures.

Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential.
The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.

Foot fastening, ISO 6432, Piston Ø 20 to 25, galvanised steel,1 piece
Foot model

Mini ball valve, Sand blasted, nickel-plated brass, Manual lever, Medium/ambient temp. -10 °C to 90 °C, G 3/8 IT, PN max. 10 bar

Angled fitting, rigid, R 1/4 o., for hose 6/4 mm, Operating pressure 0 - 10 bar, Temperature -10 °C to 60 °C, POM

Retaining ring DIN 471 28mm
Material: Feather steel, phosphated, oiled. External rings for
axial fixing a machine part on a shaft.

Article ID: 61742800

High performance V-belt XPA EPDM datum length 1750 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291750

Frequency:50 Hz
Speed:2880 1/min
Shaft Output:1594 W
Volume Flow:848 m³/h
Pressure:Δp s4307 Pa
Pressure:Δp t4658 Pa
Density:43862 kg/m³
Sound Pressure:85 dB(A)

5-ways solenoid valve

Length : 600 mm
BAR-HT-23-600-25-1M6-NW-B
SKU: SBANA100010-600
Interface/connection dim's: Threaded hole M6 (1x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

ECMSA General features
SHW+SCW module Qn 1.5

Neoprene timing belt HTD 14M width 55mm Lw 1890mm 135 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17732200

Planetary small geared motor SFP 2 with DC-motor 24V i=7,5:1 idle speed 480 1/min.
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43038724

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 80, Stroke 60, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Reducing piece PP, Supports 32/22 mm, Working pressure max. 12 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

3/2-way valve »FUTURA«, pneumatically actuated, Size 1, G 3/8, Exhaust G 1/4, Input pressure max. 16 bar, Temp. -10 °C to 50 °C
Pneumatic systems or parts of systems can be switched on and off by means of an pneumatic signal.
3/2-way type including silencer.
When they are switched off, the system is exhausted at the same time.

Metal container with viewing tube, incl. O-ring, for »multifix«, Size 1, G 1/4 and G 3/8

3/3 Tube fitting, G 1 x 19 mm, swivel nut, taper seat, with NBR O-ring, lightweight type, Brass with a bare metal surface

Flange fastening, ISO 6432, Piston Ø 20 to 25, galvanised steel, 1 piece
Flange model

Mini ball valve, nickel-plated brass, Butterfly handle, Medium/ambient temp. -10 °C to 90 °C, G 1/4 IT/ET, PN max. 10 bar

Straight screw-in fitting, G 3/8 o., for hose 10/8 mm, AF 19, Operating pressure 0 - 10 bar, Temperature -10 °C to 60 °C, POM

Spur gear made of polyacetal resin die-cast with hub module 0.5 40 teeth tooth width 3mm outside diameter 21mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28104000

High performance V-belt XPA EPDM datum length 1757 mm
Material: High Performance EPDM with polyester cord. Advanced:
These raw edged, cogged EPDM-V-belts are top products with high-strength
tensile members for improved energy efficiency and drive performance. Powerful:
The transmittable power is more than double as it is at normal narrow
V-belts and more than triple as it is at classic V-belts. Maintenance-free:
Due to the minimal elongation, a retensioning is normally not requiered. Versatile
use: With good chemical resitance and a large temperature range,
these belts a ideal for force-locking drives. Existing narrow V-belts
and classic V-belts can be replaced without problems. Common V-belt
pulleys are suitable for all these three kinds of belts. Because of the
tight length tolerances, the belts can be used in sets without
measuring. Operating temperatur: -40° to +130°C.
V-belts XPA are a useful substitute for SPA and 13.
Width b = 12.7 mm.

Height h = 10 mm.

Smallest medium pulley diametre = 71 mm.

Weight per Metre 0.105 kg.

Article ID: 15291757

Frequency:50 Hz
Speed:2920 1/min
Shaft Output:2200 W
Volume Flow:984 m³/h
Pressure:Δp s4707 Pa
Pressure:Δp t4997 Pa
Density:43862 kg/m³
Sound Pressure:88 dB(A

Length : 600 mm
BAR-HT-23-600-25-1M8-NW-B
SKU: SBANA100030-600
Interface/connection dim's: Threaded hole M8 (1x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

ECMSA General features
SHW+SCW module Qn 1.5

Neoprene timing belt HTD 14M width 55mm Lw 2100mm 150 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC.
Article ID: 17732500

Planetary small geared motor SFP 2 with DC-motor 24V i=3,6:1 idle speed 1000 1/min.
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43038824

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 80, Stroke 60, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Bushing - locking pusher, without spindle stroke, Brass, Medium temperature max. 120 °C, G 1/2, DN 15, PN max. 16 bar
Opening / closing without stem stroke

Non-return valve, G 3/4 o., thread to bite-type tube, Pipe exterior Ø 22, PN max. 160, a/f1 36, a/f2 46, a/f3 41, galvanised steel
Non-return valve, flow direction thread to bite-type tube, parallel male thread, light type

Drip cap metal

Straight screw-in fitting, M22x1,5 o., Pipe exterior Ø 18 mm, PN max. 315 bar, A/F1 32, A/F2 27, galvanised steel, soft seal
Male connector, metric thread and soft seal, light type

Straight push-in connector »click-clock«, M13x1, for hose exterior Ø 6 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Mini ball valve, Sand blasted, nickel-plated brass, Manual lever, Medium/ambient temp. -10°C to 90°C, G 1/4 IT/ET, PN max. 10 bar