Fitting 331, flat sealing, IT/ET, Rp/R 1 1/2, NBR seal, Operating temp. -20°C to 200°C, black malleable cast iron, Hot-dip galva.
Maximum temperature and maximum operating pressure should not occur at the same time!

Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

2/2-way solenoid valve brass, NC, pilot operated, 24V DC, 5W, Medium temp. -10°C to 140°C, FKM, G 1/2, PN 0.1 - 10bar
Economy series available in three different versions

- Directly operated
- Combined operation
- Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Rectangular ball valve, nickel-plated brass, ET/ET, Operating temp. -15 °C to 100 °C/60 °C gas, R 3/4, PN max. 40 bar/ 5 bar gas

Push-in L-fitting »Blue Series«, rotating, G 1/2 i., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight push-in fitting »metallica«, R 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range -1 / +15 bar, Ø63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Pressure gauge - profile seal, for thread G 1/2, Material: Cu

Extension piece, short, R 1/8 o., G 3/4 i., AF 22, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Frequency:50 Hz
Speed:1435 1/min
Shaft Output:1747 W
Volume Flow:5345 m³/h
Pressure:Δp s861 Pa
Pressure:Δp t916 Pa
Density:43862 kg/m³
Sound Pressure:77 dB(A)

Le-300-Sl, 24V Dc, 7W Weight:0,34

High-Strength for Harsh Environments
The high-strength, cast-steel CS229 stands up to harsh environments. It has been designed to facilitate service or repair. The transformer can be accessed from the top of the housing for a quick, field repair or impedance change. The transducer is removable from the outer, thru-hull housing and can be replaced while a vessel is underway.

Applications
Large, steel-hull vessels
Harsh environments including ice filled water
Navigation and survey
Steel hulls only

Door safety switch 1 NC/1 NO contact - Ex 2D
STEUTE Ex 1NC+1NO ACTUATOR
SKU: EIHG432039
Stock *: 0
Power supply: 24 V DC
Sensors and switches are designed for the control, safety and automation of our magnet systems. They are easy to build into our systems. To ensure the safety of our products, the most important sensors are often already built in. This is to guard against, for example, vibration or overheating. Some sensors are optional, for example, for detecting different switching positions (on/off).

Quality and reliability
ATEX II 1/2 D possible
Easily integrated

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 1 Homologation Dimension D x H (mm) 25 x 57 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Z52 – Z53 – Z53PT General features
2/3 way / by-pass.
Nominal pressure 16 bar.
Differential pressure 16 bar.
Maximum pressure +100°C.

Tandem linear bearing unit KGT-3 ISO series 3 Economy-Line with linear ball bearings with angular compensation with seals for shaft Ø 12mm
Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Article ID: 64681202

Planetary small geared motor SFP 1 with DC-motor 24V i=18:1 idle speed 460 1/min.
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43037624

Plastic pipe, PA 12, »speedfit«, black, Operating temperature -60 °C to 100 °C, PN at 20 °C max. 25 bar, Pipe Ø 15x12, PU 10 pcs.
Resistant to corrosion, vibration, impact, ageing, high pressures and heat.

Only sold in complete packaging units!

Sensor, »CS1« type, REED sensor, 2-wire, 3 m cable, NO
Sensors, »CS1« type

2/2-way solenoid valve brass, NC, pilot operated, 24V DC, 8W, Medium temp. -10°C to 140°C, FKM, G 3/8, PN 0.1 - 10bar
Economy series available in three different versions

- Directly operated
- Combined operation
- Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Rectangular ball valve, nickel-plated brass, IT/IT, Operating temp. -15 °C to 100 °C/60 °C gas, Rp 3/4, PN max. 40 bar/ 5 bar gas

T-connection, for hose 10/8 mm, AF 12, Working pressure max. 18 bar, nickel-plated brass

Push-in L-connector, Plug nipple 8 mm »Blue Series«, for hose exterior Ø 8 mm, Working pressure max. 15 bar, plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 10 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight push-in fitting »Blue Series« mini, round, M7, for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.

Hose sleeve, ball nipple, hose I.D. 6, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Chain connecting link type 11 / E for roller chain 081 pitch 1/2x1/8" packing unit 5 pieces
According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces.
Article ID: 10200300

200112-1.000 ENG 1-0.65
230V, 50 / 60Hz (without plug)
Cable 680mm
One-phase low-pressure fan:
Rotating direction: clockwise

Suitable For The Types Pk 100 & 150 Weight:0,35

Description
Innovative Technology
Airmar’s commitment to innovative technology has produced the SS510. This broadband 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow-water with high resolution. This transducer can also be “chirped” with a long pulse over a wide-frequency band. Users with adjustable-frequency echosounders will be able to regulate the operating frequency and tailor the beamwidth to specific survey conditions.

Applications
River, harbor, and estuary survey

Door safety switch 1 NC/1 NO contact - Ex 2D
CODED MAGN SWITCH XCS Ex 10M T
SKU: EITA042006
Stock *: 0
Power supply: 24 V DC
Sensors and switches are designed for the control, safety and automation of our magnet systems. They are easy to build into our systems. To ensure the safety of our products, the most important sensors are often already built in. This is to guard against, for example, vibration or overheating. Some sensors are optional, for example, for detecting different switching positions (on/off).

Quality and reliability
ATEX II 1/2 D possible
Easily integrated

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 1,25 Homologation Dimension D x H (mm) 25 x 57 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Conductive liquids probes for A03-A04 series General features
Maximum operating pressure 10 bar.
Maximum temperature 160°C.
Connection male G 3/8″ (electrode not included).
Weight 48 gr.
Connection between the probe and the level control is realized through a single-pole flexible cable (not supplied).
Electrode probe is not supplied

Small geared motor CRO 230V 50Hz with capacitor version A output speed 60 rpm
Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery.

Article ID: 43020000

Planetary small geared motor SFP 1 with DC-motor 24V i=422:1 idle speed 19 1/min.
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43037124

Plastic pipe, PA 12, »speedfit«, blue, Operating temperature -60 °C to 100 °C, PN at 20 °C max. 28 bar, Pipe Ø 18x14, PU 10 pcs.
Resistant to corrosion, vibration, impact, ageing, high pressures and heat.

Only sold in complete packaging units!

Kamlok quick-connect plug with exterior thread, F type, Aluminium, R 3, Plug Ø 92 mm, Pressure max. 16 bar, Temp. max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

2/2-way solenoid valve brass, NC, pilot operated, 230-240V, 50-60Hz, 16VA, Medium temp. -10°C to 140°C, FKM, G 3/8, PN 0.1-20bar
Economy series available in three different versions

- Directly operated
- Combined operation
- Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Rectangular ball valve, nickel-plated brass, IT/ET, Operating temp. -15°C to 100°C/60°C gas, R/Rp 3/4, PN max. 40 bar/ 5 bar gas

Jaw coupling with hose connection, I.D. 25 (1"), Malleable cast iron, galv. / yellow passivated, Operating pressure max. 10 bar
Universal standard coupling for compressed air lines on construction sites or in industry; standard type according to DIN 3489, used worldwide in a very wide range of applications.

- Robust couplings made of malleable iron, zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- 100% couple test and secure connection

Straight push-in fitting »metallica«, R 1/8 o., for hose exterior Ø 6 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 4 bar, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Angled screw-in supports, R 3/8 o., for hose I.D. 6 mm, AF 10, Over-pressure max. 17 bar, Temperature range -40 °C to 90 °C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Flat suction cup, round, Material NBR, »PFG«, ø:10 suitable connection nipple IT M5/G 1/8, suitable connection nipple ET M5/G1/8
Robust and hard-wearing suction pad with a single sealing lip.
Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to handle smooth or slightly rough surfaces. Due to its flat shape, it can grip the workpiece in a very short time and withstand the forces that result from fast movement of the object during handling. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very short evacuation timesSuitable for high lateral forcesGood intrinsic stability when attached to the loadSupports on the bottomVery short cycle timesHigh suction forces with small dimensions

Applications:
Handling workpieces with smooth or slightly rough surfaces, e.g. metal sheets,
cardboard boxes, sheets of glass, plastic parts and sheets of wood.

Hexagon nut DIN 934 steel strength 8 zinc-plated thread M10 left handed
Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often.
Article ID: 65231000

Frequency:50 Hz
Speed:2585 1/min
Shaft Output:19 W
Volume Flow:45 m³/h
Pressure:Δp s81 Pa
Pressure:Δp t123 Pa
Density:43862 kg/m³
Sound Pressure:45 dB(A

24V Dc, 12W, Ip67, L= 527 Mm Weight:0,35

Dual-Frequency
The M191 features dual-frequency capability in a compact, lightweight housing. These frequencies have low sidelobes, which focus more energy on target and provide good definition in hard-bottom areas. The low-ringing (Q) versions give clear, bottom detail and are especially effective at surveying in extremely, shallow-water.

Applications
River, harbor, or estuary survey

Length : 340 mm
SVM-F-114x47-0340-B-F0E
SKU: SVMF010340
Stock *: 0
Type: VMF1
Advised max. installation height: 50-65 mm
Interface/connection dim's: Threaded hole M8 (2x)
Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C.They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.

Magnet quality ferrite GSFD-33 (Br 4100 gauss)
Capture Fe particles from 0.5 mm
Manual cleaning (wipe off)
Max. temp. 100 °C
Max. holding field 140 mm

Application

Ferrous contaminants > 0.5 mm / heavy / non-food

Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C. They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.
 
Select your magnet size on the desired holding field depth. The deeper the field should reach, the heavier and larger magnet you have to select. For this reason it can be wise to select the more compact and strong neodymium (Neoflux®) plate magnets.
 
Placement
You can easily hang them suspended over a conveyor belt, attach them to the wall of a product channel, or mount them under a passing product stream. For dust-tight installation against the wall of a free-fall pipeline, we supply neodymium plate magnets including a mounting plate and quick-cleaning mechanism (see chute magnets).
 
* When placing above a belt, make sure that the construction directly below the magnet consists of non-magnetic material.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

Magnet quality: ferrite GSFD-33
Material cap: stainless steel
Material contact plate: Steel
Finish: painted


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Cleaning

Cleaning of the plate magnet is performed manually by wiping, or through use of a hinged extractor plate for quick-cleaning. You can swing the hinged extractor plate away from the magnet. The ferrous particles fall off of the extractor plate as soon as they are moved far enough away from the magnet.
 
For plate magnets including mounting plate and hinged cleaning construction: see also 'chute magnets'.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 1,5 Homologation Dimension D x H (mm) 25 x 57 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

EC probes for electronic control units General features
Case in thermoplastic material.
Linearized NTC thermistor heat-sensitive element.
Bipolar terminal board.
G1/4” cable gland

Small geared motor CRO 230V 50Hz with capacitor version A output speed 30 rpm
Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery.

Article ID: 43020001

Planetary small geared motor SFP 1 with DC-motor 24V i=213:1 idle speed 38 1/min.
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. Other types (other speeds, optional incremental encoder, 12V) available on request.
Article ID: 43037224

Service unit 3-part »GA«, PC container, Protective cage, 5 µm, Size 300, G3/8, Input pressure max. 10 bar, Control range 1.5-9 bar
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, centrifugal separator and proportional lubricator.

Straight screw-in fitting, G 3/8 o., Pipe exterior Ø 8 mm, PN max. 630 bar, A/F1 19, A/F2 22, galvanised steel, soft seal
Male connector, parallel male thread and soft seal, heavy type