FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 20 Homologation VDE | IMQ Dimension D x H (mm) 40 x 70 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

C04 General features
Sensing element with stainless steel diaphragm.
Copper bulb and capillary. Copper bulb and capillary,tinned for types C04C2 and C04D2.
Base in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with PVC cable gland.
The storage and transport temperature corresponds to the thermostat’s body admissible temperature.
Unit weight 0,16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.
Code G23: seal cap Gc 1/2 PN10 bar, without sheath.
Code G28: copper sheath Gc 1/2 PN10 bar, length 177mm, supplied with spring to fix the capillary.

SL-retainer steel zinc plated size 4 for bolt diameter 4mm
Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².
Article ID: 63790101

Precision double universal joint WDN with needle bearing DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63162000N

1 1-4 inch, 130 C

Storz adapter, Stainless steel V4A, Storz size 25-D, Tappet distance 31 mm, G 3/4 ET, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Throttle check valve, Discharge throttle (»C«) push-in connector hose 6, G 1/4, PN max. 10 bar, Temperature 0 °C to 70 °C
For fine regulation of a cylinder piston speed and precise control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece.
Can be screwed directly onto the valve or cylinder.
Compact type of construction, also ideal where space is restricted.
On the version with a knurled screw, the set volumetric flow rate can be locked with the hexagon nut to obtain a fixed setting.

Compact cylinder »ACP«, double-acting, Piston Ø 50, Stroke 5, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Hollow screw with PTFE sealing ring, Single, G 1/2, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.

Push-in Y-fitting »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight screw-in fitting, G 3/8 o., Pipe exterior Ø 8 mm, PN bar 315, A/F1 17, A/F2 22, galvanised steel
Male connector, parallel male thread, light type

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0 - 10 bar, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Clamping jaw clamp, Lightweight design according to DIN 3017, Steel bright galvanised (W1), Nominal Ø 14 mm, Belt width 9 mm
Lightweight type acc. to DIN 3017.
Applications: Soft air and fuel hose types, optimal seal, high clamping force around the hose, suitable for car dealerships, repair shops and pneumatic applications.

Clamping ring, for hose 6/8 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PP
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Screw-in fitting, Aluminium, for PVC braided hose 10x4, G 1/2, Temperature range -10 °C to 60 °C, PN max. 10 bar

Replacement silencer for basic ejector »SBP« and »SBPC«, Nozzle size 2and 2.5
Replacement silencers

Equipment plug for mini solenoid valve 15 mm, PG 9 C shape, DIN 43650 C

Locking assembly BAR stainless steel 1.4401 bore 12mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.

Twin Circuit
Visual Setting Indicator
Ranges 9 to 400 bar
Static Pressure

Frequency:50 Hz
Speed:2870 1/min
Shaft Output:621 W
Volume Flow:1499 m³/h
Pressure:Δp s821 Pa
Pressure:Δp t1082 Pa
Density:43862 kg/m³
Sound Pressure:77 dB(A)

88590-1.620 2D 56 K40 2W
90/110W
Weight: 3,5 kg

Temperature Sensor 1,5Mtr. Weight:0,15

This version of Airmar’s M563 offers excellent sensitivity and Broadband Performance throughout low and high-frequency bands. This performance allows crisp waveforms at discrete frequencies or allows Broadband Chirp or coded waveforms.

Applications
Commercial Fishing
Shallow and coastal survey

Diameter : 100 mm
HEPM-EM-D100-043-SW
SKU: GM17810
Stock: 7
Max. holding force: 3400 N
Interface/connection dim's: Threaded hole M10
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 22 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

C04 General features
Sensing element with stainless steel diaphragm.
Copper bulb and capillary. Copper bulb and capillary,tinned for types C04C2 and C04D2.
Base in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with PVC cable gland.
The storage and transport temperature corresponds to the thermostat’s body admissible temperature.
Unit weight 0,16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.
Code G23: seal cap Gc 1/2 PN10 bar, without sheath.
Code G28: copper sheath Gc 1/2 PN10 bar, length 177mm, supplied with spring to fix the capillary.

SL-retainer steel zinc plated size 5 for bolt diameter 5mm
Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².
Article ID: 63790301

Bevel gearbox KEK size 3 ratio 1:1 shaft diameter 10mm housing length 42mm
Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.
Article ID: 41000103

1 1-2 inch, 130 C

Storz coupling, Hose supports, rotating, V4A, Storz size 25-D, I.D. 19, Operating pressure max. 16 bar, Temp. -15 °C to 200 °C
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

T-connection POM, for hose exterior Ø 22 mm, Working pressure max. 10 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Compact cylinder »ACP«, double-acting, Piston Ø 40, Stroke 30, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Pipe double nipple, G 1, Length 180 mm, Working pressure max. 10 bar, Medium / ambient temperature max. 90 °C, Bright brass

Push-in T-fitting »Blue Series«, L-shape, rotating, G 1/2 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Reducing nipple, Hexagonal, G 3/8 o., G 1/4 i., AF 21, Working pressure max. 20 bar, Stainless steel 1.4408

Standard pressure gauge, Double scale, Connection, rear, centr., G 1/8, Goods class 1.6, Measurement range 0-10 bar/145 psi, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Clamping jaw clamp, Lightweight design according to DIN 3017, Steel bright galvanised (W1), Nominal Ø 15 mm, Belt width 9 mm
Lightweight type acc. to DIN 3017.
Applications: Soft air and fuel hose types, optimal seal, high clamping force around the hose, suitable for car dealerships, repair shops and pneumatic applications.

Protective cap, for »speedfit« series, black, for pipe exterior Ø 12 mm, POM

Compact connecting set for the assembly of two individual devices, for »variobloc«, Size 1, G 3/8

Push-in L-fitting »metallica«, rotating, G 3/8 o., for hose exterior Ø 14 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Push-in L-fitting »Blue Series«, rotating, Rc 1/4 i., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Twin Circuit
Ranges 0.5 to 32 bar
Diaphragm Operated
Maximum Working Pressure of 70 bar

Frequency:50 Hz
Speed:1330 1/min
Shaft Output:76 W
Volume Flow:510 m³/h
Pressure:Δp s213 Pa
Pressure:Δp t259 Pa
Density:43862 kg/m³
Sound Pressure:52 dB(A)

88609-1.620 MOTOR 2D 56 K50-2 W Single-phase AC motors with an output of> 37.5 W to <= 750 W.
Weight: 5.1 kg

With Filter Mat P15/150S And Gasket Weight:0,15

1 kW

Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The low-frequency band is a deep-water performer delivering excellent coverage and tracking. The B175L transducer has up to 20 kHz of total bandwidth in just one installation for tremendous deep-water performance.

The B175L transmits across the following bandwidth:

Low frequency 40 to 60 kHz

Tilted Element™ transducers have the ceramic element fixed at a 20°, 12° or 0° angle within the housing. The transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The B175L is available in three Tilted Element models:

Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise

Max. stack height : 45 mm
HSS-N-BA-043x022-0075-B
SKU: TGSP000075
Stock *: 0
Width: 43 mm
Neodymium sheet separators are powerful and have a compact design. They are mainly suited for the separation of oiled, sticky or perforated sheets.

Permanent magnetic
For sheets up to 3.5 mm thick
Max. stacking height 370 mm
Steel or stainless steel enclosure
With neodymium magnets

Operation

Operation of neodymium sheet separators

The magnetic field automatically forces the sheets apart and separates them. When the upper sheet is removed, the next one rises immediately.
To prevent malfunctions in fully automated production processes we recommend the use of a number of extra sheet separators.

Installation example 1

Corner installation

For optimum results, it is best to place two sheet separators at the corner(s) of stacks of large steel sheets.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 2

Installation across from each other

Sheet separators placed across from each other ensure that the sheets begin to ‘float’.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

Installation example 3

Single-piece installation

For small sheets, it is best to place the sheet separator in the middle of the shortest side.
The arrows in the photo indicate the recommended direction of transport in which the sheets can best be carried off after separation.

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 25 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

SL-retainer steel zinc plated size 6 for bolt diameter 6mm
Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².
Article ID: 63790501

Drip feed oiler system UNIKUM drip dosing at the top capacity 35 ml thread G 1/4"
Material: pickled brass. Vase glasses up to Ø 80 mm made from acrylic glass, above made from natural glass. With instantaneous shutting off, with turnable replenishing bowl, easy visual inspection of drop fall.

Article ID: 68040300

1 1-2 inch, 120 C

Storz coupling, Hose supports, for shell binding, rotating, V4A, Storz size 25-D, I.D. 19, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Throttle check valve, Supply air throttle (»V«) quick connector Hose 10/8, G 1/4, PN max. 10 bar, Temperature 0 °C to 70 °C
For fine regulation of a cylinder piston speed in the forward and return motion and precise control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece.
Can be screwed directly onto the valve or cylinder.
Compact type of construction, also ideal where space is restricted.
On the version with a knurled screw, the set volumetric flow rate can be locked with the hexagon nut to obtain a fixed setting.

Filter »variobloc« with metal container incl. viewing tube, Size 1, G 1/4, Input pressure max. 20 bar, Manual bleeder valve
Centrifugal separators with a sintered filter element.
Filtration takes place in a 2-stage process comprising cyclone separation (condensate) and a PE filter element (particles).
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Straight push-in connector with plug nipple 8 mm, reducing, for hose exterior Ø 6 mm, Working pressure max 15 bar, Stainless steel
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.

Push-in T-fitting »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Reducing nipple, Hexagonal, G 3/8 o., G 1/8 i., AF 21, Working pressure max. 20 bar, Stainless steel 1.4408