Reduction, Pipe exterior-Ø taps 8 mm bushing 6 mm, PN max. 315 bar, Stainless steel 1.4571

Pressure gauge, robust design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 25 bar, Ø 100
Robust bourdon-tube pressure gauge.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Compact cyl.ISO 21287, single-acting, male piston rod ext.,magnet,PistonØ16,Stroke5,M5, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Screw-in hose connector, O-ring G 1/2 f.hose I.D. 19 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 80 °C
Suitable for air, water, oil, steam, etc.

Plug-in angle for couplings I.D. 7.2 - 7.8, nickel-plated brass, for hose 8x6, Operating pressure 0 - 35 bar, Temp. -20°C to 100°C

Standard pressure gauge, Double scale, Connection, rear, centr., G 1/8, Goods class 1.6, Measurement range 0 - 4 bar/58 psi, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight push-in fitting »Blue Series« mini, round, R 1/8, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.

Clamping jaw clamp, Lightweight design according to DIN 3017, Steel bright galvanised (W1), Nominal Ø 10 mm, Belt width 9 mm
Lightweight type acc. to DIN 3017.
Applications: Soft air and fuel hose types, optimal seal, high clamping force around the hose, suitable for car dealerships, repair shops and pneumatic applications.

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 25.0 - 28.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Hinge pin clamp, Stainless steel 1.4301 (W4), Clamping range 40.0 - 43.0 mm, Belt width 18.0 mm, rec. tightening torque 8.0 Nm

Straight reducer, Pipe exterior Ø Female connector 10/8 mm, PN max. 630 bar, a/f1 19, a/f2 22, a/f3 19, galvanised steel
Straight reducers, heavy type

Straight screw-in fitting, G 1/4 o., Pipe exterior Ø 10 mm, PN max. 630 bar, A/F1 22, A/F2 19, galvanised steel, soft seal
Male connector, parallel male thread and soft seal, heavy type

The controller ST70-31.10 was developed for simple thermostatic controls. The setpoint and parameters are adjusted with a 3-field plastic foil keyboard.
The controller can be supplied with a tension of 12-24V AC/DC.
The installed relay has a maximum electric Ohm load of 7A. Inductive loads can be switched up to 2.2A. 900380.007

Taper-bush 5050 bore 70mm
Material: GG25.

Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in
delivery (spare screw product no. 622 516 99, order quantity as needed).
Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side
ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without
feather key, depending on the required torque. Other bush sizes and
bores are available on short notice (some in stock). Assembly
instructions
In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm;
bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm

Article ID: 62251670

Rod end GT-R DIN 12240-4 series K external thread M42x2 left maintenance-free stainless steel
Material: Outer part: Stainless steel 1.4057, forged. Inner ring:
Stainless steel 1.4034, hardened, ground and polished. Bearing race:
Stainless steel 1.4571 with PTFE-Lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread
either right-handed or left-handed.
Heavy-duty rod ends for high radial loads in corrosive areas.

Stainless steel on PTFE-lining.

Maintenance-free.

Article ID: 63299940

1000 Series Diaphragm Operated
Ranges from 5 to 400 mbar
Static Pressure
3 Phase 4.0 KW
98 KG

Rotating joint type MD – modular design with bellows system cartridge, ballbearings, for universal use

Frequency:50 Hz
Speed:2825 1/min
Shaft Output:345 W
Volume Flow:851 m³/h
Pressure:696 Pa
Pressure:870 Pa
Density:1.2 kg/m³
Sound Pressure:72 dB(A)
ErP Compliance:2015

DNG 6-22,5/S 77544-1.030
Wide-range voltage, 5-60Hz counter clockwise
Three-Phase Low-Pressure Fan
Rotating Direction: counter clockwise
Rated Power: 250/ 350 watts
Rated Current 50Hz: 1,23-1,64/ 0,71-0,94 amp.
Rated Current 60Hz: 1,68-1,45/ 0,97-0,84 amp.
Protection Category: IP55
Insulation Class: F
Number of Poles: 2
Fan wheel: sheet Steel
Fan housing: sheet Steel
Varnishing: RAL 9005 deep black
Special version: with special housing flange (corners are cut) without intake grid
Weight: approx: 12kg

M12 X 1,5, Sw 16, Brass Nickel-Plated Weight:0,12

1 kW

Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The low-frequency band is the deep-water performer delivering excellent coverage and tracking. The SS175L transducer delivers up to 20 kHz of total bandwidth in just one installation for tremendous deep-water performance.

The SS175L transmits across the following bandwidth:

Low frequency 40 to 60 kHz

Tilted Element™ transducers have the ceramic element fixed at a 20°, 12° or 0° angle within the housing. The transducer is installed almost flush to the hull. The tilt of the element corrects for the hull deadrise by orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The SS175L is available in three Tilted Element models:

Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 12,5 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

C04 General features
Sensing element with stainless steel diaphragm.
Copper bulb and capillary. Copper bulb and capillary,tinned for types C04C2 and C04D2.
Base in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with PVC cable gland.
The storage and transport temperature corresponds to the thermostat’s body admissible temperature.
Unit weight 0,16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.
Code G23: seal cap Gc 1/2 PN10 bar, without sheath.
Code G28: copper sheath Gc 1/2 PN10 bar, length 177mm, supplied with spring to fix the capillary.

Washer DIN EN ISO 7089 (DIN 125 A) for M12 (13,0x24,0x2,5mm) material stainless V4A
Material: Stainless steel V2A or V4A.
Article ID: 65399262

Ball transfer unit 374 size 15.8 housing steel black oxide finished
Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65437415

3-4 inch, 130 C

Ball valve EN 331 DVGW, nickel-plated brass, Hand lever, IT/IT, Rp 2, DN 50, Operating temp. -15 °C to 60 °C, PN max. 5 bar (Gas)
Ball valves with full bore, for gas installations. Applications: Natural gas, LPG, town gas

Throttle check valve »Blue Series«, Discharge throttle, G 3/8 o., for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 8x6, PN at 20 °C max. 19 bar, silver, Roll of 25 m
PA 12 is resistant to corrosion even at temperatures as low as -40 °C.
It has a low water absorptive capacity and is therefore dimensionally stable if the ambient humidity varies.
PA 12 resists greases, oil, fuels, hydraulic fluids, alkalis and salt solutions.
Sufficient UV resistance can only be guaranteed if the material is pigmented black!
Suitable for use with push-in fittings. Suitable for vacuum up to 12x9 mm.

Main applications:
- Compressed air lines (low-pressure range) in industry and manual trades.
- Hydraulic lines (miniature hydraulics) in instrumentation and control.
- Lines for liquid and free-flowing substances.
- Pneumatic braking systems in motor vehicles and trailers (DIN 73378:1996-02 and DIN 74324-1:1996-02).
- Fuel and lubricant supply systems.
- Vacuum lines

Wear part set, for pressure regulator DRV 225, High pressure design, G 3/4

Coupling nut, M12x1, for hose 8/6 mm, AF 14, Pressure range max. 25 bar, Temperature -40 °C to 200 °C, Stainless steel 1.4404
Supplied without seals. For use with corrosive media and at high temperatures.

Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential.
The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.

Bushing »value line«, G 1/2, AF 26, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass
For air, water, steam, oil, etc.

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0 - 16 bar, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 43.0 - 46.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Clamping jaw clamp, Lightweight design according to DIN 3017, Steel bright galvanised (W1), Nominal Ø 11 mm, Belt width 9 mm
Lightweight type acc. to DIN 3017.
Applications: Soft air and fuel hose types, optimal seal, high clamping force around the hose, suitable for car dealerships, repair shops and pneumatic applications.

Swivel nut, M14x1.5, Pipe exterior Ø 6 mm, PN max. 630 bar, a/f1 17, galvanised steel
Swivel nut, heavy type

Reducing piece 241, R 2 ET, Rp 1/2 IT black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Angled hose fitting, for hose 9/12 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (60 °C), PA
Manufactured from high impact-resistant, UV-stabilised engineering plastic, extremely resistant to weathering.
Good chemical resistance to benzine, diesel oil, fuel oil and alkalis. Not suitable for use with acids.

Blocking set incl. 2 screws and O-ring, for »FUTURA«, Size 1, G 1/4 and G 3/8

Timing belt pulley from steel AT10 72 teeth belt width 32mm for taper bush 2517
Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 16877472

Visual Setting Indicator
Static Pressure
Ranges 5 to 400 mbar
Diaphragm Operated

Rotating joint type MD – modular design with bellows system cartridge, ballbearings, for universal use

Frequency:50 Hz
Speed:2820 1/min
Shaft Output:368 W
Volume Flow:830 m³/h
Pressure:Δp s649 Pa
Pressure:Δp t819 Pa
Density:43862 kg/m³
Sound Pressure:76 dB(A)

DNG 3-9,8 77924-1.030
277/480V, 5-60Hz
Emod-Motor 0,15kW
Weight: 6.2kg

Dın B5 Portrait Format, Plastic Transparent Weight:0,14

1 kW

The TM265LM, Chirp-ready transducer is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths. The low-frequency band provides deep-water performance down to 914 m (3,000') and is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band is excellent for identifying targets suspended close to the bottom, on structure, and within the water column.

Low frequency 42 to 65 kHz, Medium frequency 85 to 135 kHz

Length : 210 mm
SVM-F-114x47-0210-B-F0E
SKU: SVMF010210
Stock *: 0
Advised max. installation height: 50-65 mm
Height: 47 mm
Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream equipment.

Max. installation height 140 mm
Low overall height
With neodymium or ferrite magnets
For recycling or metal separation

Application

Application

Ferrite magnetic plates (plate magnets) remove ferromagnetic (Fe) particles as small as 0.5 mm. An advantage is that they are suitable for use at higher temperatures (250°C), but they are not suitable for capturing stainless steel scrapings.
 
The dimensions are selected based on the desired holding field depth: the deeper the field, the heavier and larger the magnet becomes. For this reason one often opts for the more compact and equally strong neodymium (Neoflux®) plate magnets.

Placement

Placement

Overbelt placement or installation in/against a free-fall line. For placement in a free-fall line Goudsmit also supplies mounting plates (see also chute magnets). This makes dust-proof mounting possible and makes them easy to clean.
 
For a width in excess of 300 mm a neodymium magnet is recommended for installation in a free-fall line. In such applications ferrite plate magnets are too heavy for manual cleaning. If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Design

Goudsmit builds plate magnets for mounting above production lines that feature 'flux control' to create a deeper holding field. These have extra magnets between the poles that cause the lines of flux to penetrate deeper into the product flow. A ridge prevents captured iron particles from being carried away again by the product flow.


Cleaning

Cleaning

Cleaning of the plate magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away from the magnet. The Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field. For quick cleaning, see also chute magnets.

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 13 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

C04 General features
Sensing element with stainless steel diaphragm.
Copper bulb and capillary. Copper bulb and capillary,tinned for types C04C2 and C04D2.
Base in shock-proof self-extinguishing thermoplastic material V0.
Electrical connection output with PVC cable gland.
The storage and transport temperature corresponds to the thermostat’s body admissible temperature.
Unit weight 0,16 Kg.
Electric features
Code 303298LA: cable gland G1/2 for connection output in shock-proof self-extinguishing thermoplastic material V0.
Code G23: seal cap Gc 1/2 PN10 bar, without sheath.
Code G28: copper sheath Gc 1/2 PN10 bar, length 177mm, supplied with spring to fix the capillary.

1 1-4 inch, 130 C

Valve disc for valve terminal HDM, Connection 6 mm, 5/2-way, bistable (double solenoid valve)
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.

Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.

Suitable for filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.

Monostable (non-latching) version of manual control also available on request.

The operating pressure is based on the installed input plates.

Throttle check valve »Blue Series«, Discharge throttle, G 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 8x6, PN at 20 °C max. 19 bar, green, Roll of 25 m
PA 12 is resistant to corrosion even at temperatures as low as -40 °C.
It has a low water absorptive capacity and is therefore dimensionally stable if the ambient humidity varies.
PA 12 resists greases, oil, fuels, hydraulic fluids, alkalis and salt solutions.
Sufficient UV resistance can only be guaranteed if the material is pigmented black!
Suitable for use with push-in fittings. Suitable for vacuum up to 12x9 mm.

Main applications:
- Compressed air lines (low-pressure range) in industry and manual trades.
- Hydraulic lines (miniature hydraulics) in instrumentation and control.
- Lines for liquid and free-flowing substances.
- Pneumatic braking systems in motor vehicles and trailers (DIN 73378:1996-02 and DIN 74324-1:1996-02).
- Fuel and lubricant supply systems.
- Vacuum lines

Wear part set, for pressure regulator DRV 225, High pressure design, G 1/2

Push-in L-connector, Plug nipple 10 mm »Blue Series«, reducing, for hose exterior Ø 8 mm, Working pressure max. 15 bar, Plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight fitting, Pipe exterior Ø 10 mm, PN max. 315 bar, AF1 19, AF2 17, galvanised steel
Union, light type

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0 - 1.6 bar, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 9.0 mm, Clamping range 50.0 - 70.0 mm