Timing belt pulley HTD 14M material steel 28 teeth for belt width 85mm for taper bush 2517
Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 17677314

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

3-4 inch, 130 C internal term: RSRO One way: no 2 way with a standing inner tube: No 2 way with rotating inner tube: Yes

Pressure gauge, robust design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 400 bar, Ø 160
Robust bourdon-tube pressure gauge.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Straight screw-in fitting, G 3/8 o., for hose 6/8 mm, AF 22, Working pressure max. 10 bar (20 °C)/max. 2.5 bar (90 °C), PP
Chemically resistant to almost all inorganic acids and bases, even in high concentrations and at temperatures greater than 90 °C.

Pushbutton safety coupling I.D. 5.5, ARO 210, rotating, Alu, Sleeve I.D. 9, Operating pressure max. 12 bar, Temp. -20°C to 70°C
High-quality, robust and durable, one-hand quick disconnect safety couplings.
When it is pressed for the first time, air is relieved from the coupling but the plug in the coupling remains locked. The plug is only disconnected when the pushbutton is pressed for the second time.
The dreaded "whiplash effect" is avoided and the risk of injury to the operator virtually eliminated.

The safety version conforms to ISO-Standard DIN EN ISO 4414.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive.

Swing safety coupling I.D. 6, ISO 6150 C, Steel, NPT 1/4 IT, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Plug nipple pipe DN 6, Brass 2.0401, Pipe exterior Ø 10 mm, AF 11, Operating pressure max. 15 bar, Temp. -20 °C to 160 °C
Compatible with HASCO Z 8 system.

For temperature control applications involving hot or cold water or heat transfer oil, e.g. for cooling circuits on plastics processing machines.
Optionally with free passage, one or both sides sealing.
Female-threaded couplings and plugs with female-threaded PTFE seal.

Elbow 2a, 90°, short, Rp 3/4 IT, Rp 3/4 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Mounting bracket with 2 screws

1-ear hose clamp with insert ring, Stainless steel 1.4301 (W4), Clamping range 7.5 - 8.5 mm, Belt width 7.8 mm

Pipe double nipple 23, ET/ET, Black steel, R 2, Length 60.0 mm, Max. working pressure 50 bar, DIN EN 10241
The steel fittings are made of tubular steel to DIN 2441 and boast good resistance to mechanical stresses.

Hot dip galvanised steel fittings are completely coated with a layer of pure zinc and are therefore protected against rust.

They are used in pipe construction, plumbing and gas installations as well as a wide range of industrial applications, especially in conjunction with the popular malleable iron series.

Plug-in angle connector POM, Supports 8 mm, for hose exterior Ø 8 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Replacement sieve for dirt strainers made of brass, for connection size G 2 1/2, mesh width 0.8 mm, DN 65

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 9.0 mm, Clamping range 32.0 - 50.0 mm

Reducing nipple, long type, G 3/4 o., G 1 i., AF 36, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Sintered bronze silencer, Hexagonal, G 1/8, AF 13, Operating pressure 0 - 8 bar, Operating temperature -10 °C to 250 °C
For reducing the exhaust noise generated by pneumatic equipment.

Push-in T-fitting »Blue Series«, rotating, R 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Swivel nut, M16x1.0, Pipe exterior Ø 12 mm, PN max. 100 bar, a/f1 19, galvanised steel
Swivel nut, very light type

Angled screw-in supports, R 1/8 o., for hose I.D. 4 mm, AF 10, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Push-in T-connector »metallica«, for hose exterior Ø 6 mm, Working pressure max. 16 bar, Operating temperature -20 °C to 150 °C
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Straight push-in connector »Blue Series«, reducing, for hose exterior Ø 6/4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 7.0 - 9.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Captive nipple I.D. 5, Bright brass, G 1/8 IT, red, Operating pressure 0 - 35 bar, Medium / ambient temp. -20 °C to 100 °C

The controller ST64-31.10 was developed for simple thermostatic controls. The round housing allows applications at locations in which formerly only mechanical controls were in use. The unit is supplied with a tension of 12-24V AC or 16-36V DC and is pre-set for Pt100 sensor. The installed relay has a maximum electric Ohm load of 5A. Inductive loads can be switched up to 2,2A. 900197.020

Retaining ring DIN 471 7mm
Material: Feather steel, phosphated, oiled. External rings for
axial fixing a machine part on a shaft.

Article ID: 61740700

Pressure Ranges 0 to 400 mbar
Accuracy +/-1.6%
100mm + 160mm Gauge Sizes

internal term: 3-8 inch, 90 C 10,0 bar water One way: no 2 way with a standing inner tube :no 2 way with a standing inner tube: yes

Rotating joint with aluminium- or brassdesign for water
internal term: PRO One way: yes 2 way with a standing inner tube: No 2 way with rotating inner tube: No

Frequency:50 Hz
Speed:2760 1/min
Shaft Output:39 W
Volume Flow:305 m³/h
Pressure:245 Pa
Pressure:329 Pa
Density:1.2 kg/m³
Sound Pressure:62 dB(A)

With Rubber Coating Of Samtoprene Black D=22Mm Weight:0,01

1 kW

The B258 is an excellent, economical, 1 kW, dual-frequency transducer for anglers. Its unique four ceramic-element construction produces an elliptical beam that covers a wider area and produces excellent target resolution. The combination of 50 and 200 kHz make it a great option for both shallow and deep-water use. The included high-performance fairing gives excellent results at speeds up to 30 knots (34 MPH).

Neodymium (NdFeB) 250 N
PM-RTB-N-RB-D66x8.5xM5
SKU: GM17511
Stock: 0
Size: Ø66 mm
Height (L): 15 mm
Shear force: 85 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 3,15 Homologation VDE | IMQ Dimension D x H (mm) 25 x 57

Twin cable / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

25 – 27 series ring and control knob General features
Ring and control knob for C02 thermostats series

BARREL NIPPLE LENGTH 80 MM - STAINLESS STEEL 316L

Information

Cylindrical nipple - 316L stainless steel> DiamA " very available: from DN10 to DN50 - Gas thread> Characteristics of the cylindrical nipple - 316L stainless steel: Tube RoulA (c) / SoudA (c) - Schedule 20S> Nominal pressure of the nipple cylindrical: PN50> ISO 7/1 standard

Slip shaft with joints PW both sides bore 16H7 telescoped length 250mm max. length 340mm steel outer diameter 32mm
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63183200

Precision shaft steel with shaft support Ø 25h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64742503

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

internal term: 1-2 inch, 90 C 10,0 bar water One way: no 2 way with a standing inner tube :no 2 way with a standing inner tube: yes

1 inch, 130 C internal term: SRO One way: no 2 way with a standing inner tube: Yes 2 way with rotating inner tube: No

Pressure gauge, robust design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 100 bar, Ø 160
Robust bourdon-tube pressure gauge.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Replacement parts set for dirt strainers made of red brass, Screen and seal, Mesh width 0.6 mm, for connection size 1 1/2

Pushbutton safety coupling I.D. 5.5, ARO 210, rotating, Alu, Sleeve I.D. 13, Operating pressure max. 12 bar, Temp. -20°C to 70°C
High-quality, robust and durable, one-hand quick disconnect safety couplings.
When it is pressed for the first time, air is relieved from the coupling but the plug in the coupling remains locked. The plug is only disconnected when the pushbutton is pressed for the second time.
The dreaded "whiplash effect" is avoided and the risk of injury to the operator virtually eliminated.

The safety version conforms to ISO-Standard DIN EN ISO 4414.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive.

Swing safety coupling I.D. 6, ISO 6150 C, Steel, NPT 3/8 IT, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Fork head, »Y« type for cylinder series »MI« and »MSI«, for piston Ø 20, Piston rod thread M8x1.25
Fork model, »Y« type

Elbow 41, 45°, Rp 1/2 IT, Rp 1/2 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Angled bulkhead fitting, Pipe exterior Ø 8 mm, PN max. 315 bar, AF1 17, AF2 19, AF3 12, galvanised steel
Bulkhead elbow connector, light type

Locking screw »value line«, G 1/4, AF 17, Operating pressure max. 60 bar, Operating temperature max. 150 °C, nickel-plated brass
For air, water, steam, oil, etc.

Hinge pin clamp, Chrome steel 1.4016 (W2), Clamping range 85.0 - 91.0 mm, Belt width 25.0 mm, rec. tightening torque 20.0 Nm
For use with our industrial water, rubber, suction and discharge hoses.

Straight reducer, Pipe exterior Ø Female connector 12/8 mm, PN max. 630 bar, a/f1 22, a/f2 24, a/f3 19, galvanised steel
Straight reducers, heavy type

Straight push-in fitting »Blue Series« mini, R 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Screw-on hose connector, IT, cyl. G 1/4, for hose I.D. 9 , AF 17 Brass
As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

Straight screw-in fitting, G 3/8 o., for hose 4/6 mm, AF 22, Working pressure max. 10 bar (20 °C)/max. 2.5 bar (90 °C), PP
Chemically resistant to almost all inorganic acids and bases, even in high concentrations and at temperatures greater than 90 °C.

Push-in T-fitting »Blue Series«, rotating, G 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Thread plug nipple »click-clock«, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
By combining these parts with unions, union elbows and union tees, you can obtain all essential connecting variants and simultaneously reduce your warehousing costs.

Hexagonal counter nut, M10x1.0, AF 14, nickel-plated brass, Max. working pressure 25 bar, Max. operating temperature 150 °C
Suitable for air, water, oil, steam, etc.