Pipe double nipple, G 1/2, Length 30 mm, Working pressure max. 10 bar, Medium / ambient temperature max. 90 °C, Bright brass

Straight push-in bulkhead connector »Blue Series«, Self-locking, M16x1.5, for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Double hose connector, for hose I.D. 4, nickel-plated brass CW614N, Max. working pressure 16 bar, Max. medium/ambient temp. 90 °C

Set-screw coupling TR bore 25mm with keyway stainless steel 1.4305
Material: Stainless steel 1.4305

These couplings do not allow any shaft displacement in axial or radial
direction. They should therefore only be used with perfectly alligned
shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1,
Tolerance P9. The torques in the table are maximum values for couplings
with keyway. The calculations based on feather-key connection.

Article ID: 60099225

Locking assembly COM-B bore 32mm size 32-43 QPQ-coated
Material: Steel, QPQ coated. High corrosion resistance,improved
fatigue strength, primarily food safe.

Self-centering clamping bush for small hub diametres. For medium
torques. Self-Locking.
Fit: Shaft h8. Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange until the flange is
released.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61577632

Interface/connection dim's : DN250 acc. EN 1092-1 PN10
SFN-250-IF-02O-N-F1m-S-B-B
SKU: SZFN001160
Stock *: 0
Capacity: 150 m³/h (at 1m/s)
Build-in length: 500 mm
Weight: 143 kg
Very robust filter, suitable for filtering large ferrous contaminants of 1-50 mm out of coarse or high-capacity product flows under pressure, such as pulp in the paper industry. The magnets are placed on the outside of the product channel. Therefore the passage is completely free, enabling large parts to pass unobstructed.

Manual cleaning (wipe off)
Capture Fe particles from 1 - 50 mm
Flanges DN100-250 (EN 1092-1)
Max. 10 bar / 60 °C
Plate magnets on side (6,000 gauss)

Application

High-capacity & coarse product flows

This very robust magnetic filter is designed especially for larger capacities and coarser product flows.
 
An example of a common application is pulp in the paper industry.
 
Because the magnets are located outside the product stream, this filter permits better flow than filters with magnetic bars.
 
However, the magnetic contact is less, so that only larger ferrous particles will be filtered out.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
This industrial magnetic filter is equipped with plate magnets, placed on the sides of the product channel. This permits a better flow than filters with magnetic bars, because they are placed in the middle of the product flow.

2 Plate magnets outside product channel
Magnet quality N-35, 6,000 gauss on the magnet contact surface
Max. 10 bar / 60 °C
Inlet/outlet DN100 - 250 (EN 1092-1 PN16)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
2 strong neodymium plate magnets are positioned on the sides of the product channel. Here they attract passing ferromagnetic contaminants. The captured ferrous particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
After the product stream is stopped, you swing the magnets outwards. Now wipe them clean by hand.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet units
Swing the magnet units outwards as far as possible
Wipe clean the magnet with a soft cloth and - if necessary - a suitable cleaning fluid
Swing the magnet units back against the housing
Re-tighten the screw connections
Restart the product flow

Rod end GT-R DIN 12240-4 series K internal thread M30x2 left maintenance-free stainless steel
Material: Outer part: Stainless steel 1.4057, forged. Inner ring:
Stainless steel 1.4034, hardened, ground and polished. Bearing race:
Stainless steel 1.4571 with PTFE-Lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread
either right-handed or left-handed.
Heavy-duty rod ends for high radial loads in corrosive areas.

Stainless steel on PTFE-lining.

Maintenance-free.

Article ID: 63299730

Two-piece clamp coupling MAT both sides bore 25mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of nylon. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Article ID: 60092500

Flange pressure controller, Flange pressure 300 bar, for flammable gases, Gas type: Combustible gas, Working pressure 0 - 10 bar
Single-stage type of construction acc. to DIN EN ISO 2503, with shut-off valve and safety valve as well as pressure gauges for the cylinder contents and working pressure.

Throttle check valve »Blue Series«, Discharge throttle, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Swivel safety coupling I.D. 11, ISO 6150 C, Steel, G 3/8 ET, two-stage, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
High quality, robust and long lifetime one hand rotation secure coupling.
A secure connection is made by pushing in the plug-in nipple that clicks in audibly. Uncoupling is done by rotating the sleeve anti-clockwise. For this, the pending pressure in the coupling and line are vented, however the plug-in nipple is not completely released via a safety latch. The plug-in nipple can only be pulled out after a clockwise rotation of the sleeve.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, manufacturing industry, mining.

Suspension chain for supply unit 3-Kraft

Straight push-in bulkhead connector reducing »click-clock«, M17x1, for hose exterior Ø 6/10 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Reducing fitting, Sealing cone, Nut M26x1.5 i., Pipe exterior Ø1 18 mm, Pipe exterior Ø2 8 mm, PN max. 315 bar, galvanised steel
Reducer, with cone seal, light type

Straight screw-in fitting, Kink protection spring, G 1/4 o., for hose 10/8 mm, Working pressure max. 18 bar, nickel-plated brass

Hexagonal counter nut, M22x1.0, AF 27, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Turnbuckle similar DIN 1479 steel zinc-plated thread M8 length 35mm
Material: St37 DIN 1629, either untreated or zinc-plated.

M6 to M16 with overlapping thread, from M20 middle part relieved.
Some turnbuckle nuts are supplied with cross-holes, according to DIN 1479 as at 09/2005, which serve to check the minimum thread engagement.

*Threads: one side right-hand thread, other side left-hand thread.


Article ID: 65385800

Locking assembly COM-B bore 35mm size 35-47 QPQ-coated
Material: Steel, QPQ coated. High corrosion resistance,improved
fatigue strength, primarily food safe.

Self-centering clamping bush for small hub diametres. For medium
torques. Self-Locking.
Fit: Shaft h8. Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange until the flange is
released.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61577635

Product inlet/-outlet diameter : 100 mm
SPP-0-TC-FO-S4-B-BB
SKU: SPPE000160
Stock: 8
Type: PM0
Max. capacity: 10 m³/h
Build-in length: 570 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Flange pressure controller, Flange pressure 300 bar, for flammable gases, Gas type: Combustible gas, Working pressure 0 - 1.5 bar
Single-stage type of construction acc. to DIN EN ISO 2503, with shut-off valve and safety valve as well as pressure gauges for the cylinder contents and working pressure.

Elbow 41, 45°, Rp 2 IT, Rp 2 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Swivel safety coupling I.D. 11, ISO 6150 C, Steel, G 1/2 ET, two-stage, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
High quality, robust and long lifetime one hand rotation secure coupling.
A secure connection is made by pushing in the plug-in nipple that clicks in audibly. Uncoupling is done by rotating the sleeve anti-clockwise. For this, the pending pressure in the coupling and line are vented, however the plug-in nipple is not completely released via a safety latch. The plug-in nipple can only be pulled out after a clockwise rotation of the sleeve.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, manufacturing industry, mining.

Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 5x3, PN at 20 °C max. 20 bar, blue, Roll of 25 m
PA 12 is resistant to corrosion even at temperatures as low as -40 °C.
It has a low water absorptive capacity and is therefore dimensionally stable if the ambient humidity varies.
PA 12 resists greases, oil, fuels, hydraulic fluids, alkalis and salt solutions.
Sufficient UV resistance can only be guaranteed if the material is pigmented black!
Suitable for use with push-in fittings. Suitable for vacuum up to 12x9 mm.

Main applications:
- Compressed air lines (low-pressure range) in industry and manual trades.
- Hydraulic lines (miniature hydraulics) in instrumentation and control.
- Lines for liquid and free-flowing substances.
- Pneumatic braking systems in motor vehicles and trailers (DIN 73378:1996-02 and DIN 74324-1:1996-02).
- Fuel and lubricant supply systems.
- Vacuum lines

Fitting elbow 98, conical sealing, IT/ET, Rp 1/2, R 1/2, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Air gun »blow line«, Aluminium, anodised blue, Noise silencer nozzle, Temp. -10°C to 50°C, PN max. 10 bar, for couplings I.D. 7.2
The classic aluminium gun with the proven silencer nozzle for blowing out and cleaning machines, workpieces, bore holes, hollow parts, etc.

Screw-on hose connector, G 1/2 i., for hose I.D. 14, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.

Suitable for air, water, oil, steam, etc.

Reducing piece »value line«, Supports 6 mm, Hose connection 4 mm, Operating pressure max. 16 bar, nickel-plated brass
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.

One-piece clamp coupling MAS both sides bore 25mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. The torques in the table are maximum values which can only be
achieved with perfect mounting and dimensional accuracy of the shaft.

Article ID: 60099625

Clamping bush MSA bore 38mm
Material: Steel.

Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion.

Tolerance: Shaft h11 up to k6, Hub H7 up to H11

The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table.

Operating factor: See PDF-catalog page.

1) approximate surface pressure between clamping bush and hub.


Article ID: 61503800

Rubber buffer GH ø 20mm height 30mm with through hole 8,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572030

Locking assembly COM-B bore 40mm size 40-53 QPQ-coated
Material: Steel, QPQ coated. High corrosion resistance,improved
fatigue strength, primarily food safe.

Self-centering clamping bush for small hub diametres. For medium
torques. Self-Locking.
Fit: Shaft h8. Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange until the flange is
released.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61577640

Product inlet/-outlet diameter : 150 mm
SPP-1-TC-FO-S4-B-BB
SKU: SPPE000161
Stock: 3
Type: PM1
Max. capacity: 28 m³/h
Build-in length: 680 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 15mm hardened and ground outside diameter 100mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2.
Teeth, bores and faces ground.

Tooth quality 7 e25.
Pressure angle 20°.

Feather Keyways in accordance with DIN 6885/1, tolerance P9.
Position of keyway to tooth is not defined.

Article ID: 24184800

Polyurethane timing belt HTD 14M width 55mm 14M-55 open length
Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%.
Article ID: 17766300

Flange pressure controller, Flange pressure 300 bar, for non-flammable gases, Gas type: Oxygen, Working pressure 0 - 10 bar
Single-stage type of construction acc. to DIN EN ISO 2503, with shut-off valve and safety valve as well as pressure gauges for the cylinder contents and working pressure.

Push-in T-fitting »click-clock«, rotating, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Swivel safety coupling I.D. 11, ISO 6150 C, Steel, G 3/4 ET, two-stage, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
High quality, robust and long lifetime one hand rotation secure coupling.
A secure connection is made by pushing in the plug-in nipple that clicks in audibly. Uncoupling is done by rotating the sleeve anti-clockwise. For this, the pending pressure in the coupling and line are vented, however the plug-in nipple is not completely released via a safety latch. The plug-in nipple can only be pulled out after a clockwise rotation of the sleeve.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, manufacturing industry, mining.

Polyurethane hose (PUR), Temperature -20 °C to 60 °C, Hose Ø 6x4 mm, PN at 23 °C max. 11 bar, black, Roll of 25 m
Polyurethane hoses are renowned for their extreme flexibility and correspondingly narrow bending radius across a wide temperature range.

They are more flexible even than LD-PE hoses and exhibit good abrasion resistance, very good low-temperature flexibility, only minimal permanent deformation when subjected to long-term stresses as well as good resistance to the majority of oils, greases, aliphatic hydrocarbons and oxygen.

Main applications:
- Pneumatic and hydraulic (miniature hydraulics) lines
- Mechanical engineering
- Engine construction
- Instrumentation and control
- Suitable for vacuum
- Ideal for use with unions

Bushing with exterior hexagonal, reducing, G 1/2 i., M14x1.5, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Air gun »blow line«, Aluminium, anodised blue, Noise silencer nozzle, Temp. -10 °C to 50 °C, PN max. 10 bar, Sleeve I.D. 6
The classic aluminium gun with the proven silencer nozzle for blowing out and cleaning machines, workpieces, bore holes, hollow parts, etc.

Reducing nipple, G 3/4 o., G 3/8 i., AF 30, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.

Suitable for air, water, oil, steam, etc.

Screw-in support POM, G 1/8, for hose exterior Ø 4 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Rubber buffer GH ø 25mm height 20mm with through hole 10,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572520

Locking assembly COM-B bore 45mm size 45-59 QPQ-coated
Material: Steel, QPQ coated. High corrosion resistance,improved
fatigue strength, primarily food safe.

Self-centering clamping bush for small hub diametres. For medium
torques. Self-Locking.
Fit: Shaft h8. Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange until the flange is
released.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61577645

Product inlet/-outlet diameter : 200 mm
SPP-2-TC-FO-S4-B-BB
SKU: SPPE000162
Stock: 1
Type: PM2
Max. capacity: 60 m³/h
Build-in length: 792 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Spur gear shaft made from steel with one-sided hub module 1.5 21 teeth toothed length 180mm total length 230mm outside diameter 34.5mm
Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°.
Article ID: 21852100

Cardan joint KE outer diameter 40mm both sides bore 25H7 material steel total length 108mm
Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides.
Article ID: 63014000

Active charcoal filter »variobloc« with PC container, 0.003 mg/m³, Size 2, G 1, Input pressure max. 16 bar, Temp. max. 50 °C
Activated carbon filters are used to absorb oil vapour from the compressed air. The incoming compressed air should be dry and free of impurities (upstream connection of a micro-filter is recommended).

Distributor strip, Outlets one side front, Input 2 x 1/8, Output 6 x M5, Aluminium
For easy assembly of compressed air taps (screw fittings, unions, couplings, etc.).
Optionally with 2, 3, 4, or 6 outlets on one side or both sides.

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 40, Stroke 45, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Long reducer, Soft sealing, G 3/4 o., G 1 1/4 i., PN max. 400 bar, AF1 55, galvanised steel
Reducing adapters, galvanised steel acc. DIN 2353

Rem. double threaded nipple, con. seal.R 1/2 o., R 1/2 o.nickel-plated brass, Max. working pressure 25 bar, Max. oper. temp. 150°C
Suitable for air, water, oil, steam, etc.

Silencing nozzle, Connection M12x1,25, for all air guns made of aluminium / nickel-plated die-cast aluminium
Suitable for all aluminium and die-cast aluminium nickel-plated blow guns.

Air gun »blow line«, Aluminium, anodised blue, Noise silencer nozzle, Temp. -10 °C to 50 °C, PN max. 10 bar, Sleeve I.D. 9
The classic aluminium gun with the proven silencer nozzle for blowing out and cleaning machines, workpieces, bore holes, hollow parts, etc.

Screw-in support POM, G 1/8, for hose exterior Ø 5 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Rubber buffer GH ø 25mm height 25mm with through hole 10,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68572525

Locking assembly COM-B bore 50mm size 50-65 QPQ-coated
Material: Steel, QPQ coated. High corrosion resistance,improved
fatigue strength, primarily food safe.

Self-centering clamping bush for small hub diametres. For medium
torques. Self-Locking.
Fit: Shaft h8. Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange until the flange is
released.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61577650

Product inlet/-outlet diameter : 250 mm
SPP-3-TC-FO-ST-B-BB
SKU: SPPE000063
Stock: 4
Type: PM3
Max. capacity: 100 m³/h
Build-in length: 950 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Gear rack made of POM module 3 tooth width 25mm height 25mm length 1500mm
Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm.
Article ID: 29860700

Polyurethane timing belt HTD 14M width 55mm 14M-55 open length PAZ = Polyamide fabric on tooth side
Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives.
Article ID: 17766301