Straight screw-in fitting, R 1/4 o., Pipe exterior Ø 10 mm, PN bar 630, A/F1 22, A/F2 19, galvanised steel
Male connector, conical male thread acc. to ISO 7-1, heavy type

Hexagonal counter nut, G 2, AF 70, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C
As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

Cap 300, IT, Rp 2 1/2, Operating temperature -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Extension piece, short, G 1/4 o., G 1/8 i., AF 17, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

O35 General features
Operating time 90 s / 15 mm.
Sound level max. 45 dB (A).
Position indicator: mechanical travel 5 ÷ 15 mm.
Protection class IEC / EN: II
Completely isolated.
Degree of protection IEC / EN IP54.
Operating mode Type 1.
Rated current supply voltage 4 kV.
Pollution degree control: 3.
Ambient temperature 0 ° C ÷ 50 ° C.
Storage temperature -40 ° C ÷ 80 ° C.
Ambient humidity 95% r.h., non-condensing.
Electric features
Rated voltage AC 230VRated voltage frequency 50/60 HzTolerance range AC 198 … 264VConnection with 4 mm² terminals and 1 m cable, 3 x 0.75 mm²

Cylindrical bush slotted version 15 x 17 x 15 mm
Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8

Article ID: 62401515

Sliding hub FA size 1 torque adjustable 20-75 Nm outer diameter 68 mm max. bore: 25mm
Material: Steel, zinc-plated and chromated. - High-quality version. - The slipping torque can be adjusted with common assembly tools for screws, also after mounting. - By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately). - The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. Required bush length: The bush length required depends on the width of the component to be joined. To calculate the bush length take the width of the component and add 1.5 times the thickness of the friction disc, plus an additional 0.5mm. Bush length in mm = 1.5 x s + b + 0.5.
Article ID: 61210110

2/2 solenoid valve DN 10 port G3/8, 24V DC
Material: Housing: Brass, PA66 Seat seal: NBR (Perbunan) Internal parts: 1.4104, 1.4303, PVDF - For neutral gaseous and liquid fluids. - Electromagnetically actuated valve, with forced valve lifting. - Diaphragm valves. - Connection internal thread G1/4 to G1/2. - Operating pressure 0 to 10 bar (up to 25 mm²/s cSt). For contaminated fluids insertion of a strainer is recommended. Description (standard unit) Solenoid valve for, e.g., air , water, oil. Switching function: Normally closed. Flow direction: determined. Fluid temperature: -10°C to max. +90°C. Ambient temperature: -10 °C to max. +50°C. Mounting position: optional, preferably solenoid vertical on top. Features - Suitable for vacuum. - Clear design. - Compact solenoid with integrated core tube. - Valve works without minimum pressure difference (Zero Delta P). - Operating pressure 0 - 20 bar with alternating voltage and NBR seal.

Article ID: 85113811

Service unit 2-part »multifix« with polycarbonate container, Size 3, G 3/4, Input pressure max. 16 bar, Control range 0.5 - 10 bar
Two-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure, with self-relieving design, combined with a centrifugal separator and a proportional lubricator.

Trunnion mounting, ISO 21287, for compact cylinder, Piston Ø 25, with 4 screws
Male hinge model

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 32, Stroke 80, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way toggle lever valve, Hose side, Quick connector Hose G 1/4 IT, G 1/4, PN max. 8 bar, Temp. 0°C to 70°C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Locking screw, Hexagonal socket and flange G 1 AF 17 nickel-plated brass Max. working pressure 25 bar Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Straight screw-in fitting, NPT 3/8 o., Pipe exterior Ø 12mm, PN max. 630 bar, A/F1 24, A/F2 22, galvanised steel, NPT threat
Male connector, male thread NPT, heavy type

Reducing nipple, Short design, G 1 1/4 ET, G 1 IT, AF 50, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Coupling nut, M18x1.5, Pipe exterior Ø 12 mm, Operating pressure max. 60 bar, Temperature max 150 °C, nickel-plated brass

ECMCA General features
With filter and balancing valve

ES-bolt for Clevis DIN 71752 size 6 x 12 steel zinc-plated
Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN.
Article ID: 63740500

Neoprene timing belt HTD 14M width 85mm Lw 1190mm 85 teeth
Material: Neoprene with glas-fibre tensile member. Contact surface lined with nylon reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC.
Article ID: 17751100

2/2 solenoid valve DN 10 port G3/8 230V 50/60Hz
Material: Housing: Brass, PA66 Seat seal: NBR (Perbunan) Internal parts: 1.4104, 1.4303, PVDF - For neutral gaseous and liquid fluids. - Electromagnetically actuated valve, with forced valve lifting. - Diaphragm valves. - Connection internal thread G1/4 to G1/2. - Operating pressure 0 to 10 bar (up to 25 mm²/s cSt). For contaminated fluids insertion of a strainer is recommended. Description (standard unit) Solenoid valve for, e.g., air , water, oil. Switching function: Normally closed. Flow direction: determined. Fluid temperature: -10°C to max. +90°C. Ambient temperature: -10 °C to max. +50°C. Mounting position: optional, preferably solenoid vertical on top. Features - Suitable for vacuum. - Clear design. - Compact solenoid with integrated core tube. - Valve works without minimum pressure difference (Zero Delta P). - Operating pressure 0 - 20 bar with alternating voltage and NBR seal.

Article ID: 85113812

Push-in T-connector, for hose exterior Ø 16 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Unidirectional flow control valve »lineonline«, Flow one-sided, Hose - thread, G 1/4, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 32, Stroke 80, G 1/8, Working pressure 1.5 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way toggle lever valve, Hose side, Quick connector Hose 6/4, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Reducing sleeve 246, Rp 1 1/2 IT, R 1 ET, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Worm thread - hose clamp »blow line«, Stainless steel (W 5) 1.4401, Belt width 12.0 mm, Clamping range 40.0 - 60.0 mm

Screw-on hose connector, G 1 i., for hose I.D. 25 mm, AF 38, Brass, Max. working pressure 25 bar, Max. operating temperature 150°C

Reducing piece 241, ET/IT, R 3/8 o., Rp 3/4 i., Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

ECMCA General features
With filter and balancing valve

Clevis similar DIN 71752 size 5 x 10 right handed aluminum black anodized
Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed.
Article ID: 63766203

Safety handwheel SHR material aluminium diameter 160mm
Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage.

Article ID: 67061600

Precision worm wheel centre distance 53mm i=28 28 teeth
Material: Special brass CuZn40Al2/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency.

Article ID: 32302800

Filling valve (start-up valve) »FUTURA«, Size 4, G 3/4, Input pressure 2.5 - 16 bar, Temperature -10 °C to 50 °C
Seat valves operated by secondary pressure for controlled pressurisation of pneumatic systems.
These valves prevent a sudden build-up of pressure accompanied by dangerous, jerky cylinder movements.
The full cross-section of the regulator is opened at 50% of the input pressure.
The filling time can be altered by turning the adjusting screw.

Unidirectional flow control valve »lineonline«, Flow one-sided, Thread - hose, G 1/4, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 32, Stroke 80, G 1/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way toggle lever valve, Hose side, Quick connector Hose 8/6, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Throttle check valve »Blue Series«, Discharge throttle, R 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in T-connector »Blue Series«, for hose exterior Ø 4 mm, Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

T-piece, exterior / exterior / exterior, R 3/4, AF 25, Operating pressure max. 60 bar, Operating temp. max. 150 °C, Bright brass

Cap 300, IT, Rp 3/4, Operating temperature -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Length : 990 mm
SVM-F-780x313-1000-B-F0E
SKU: SVMF071000
Stock *: 0
Advised max. installation height: 165-320 mm
Height: 385 mm
Removal of pieces of steel in the recycling industry or for protection of grinding mills. For installation up to 400 mm above conveyor belt.

Max. installation height 400 mm
Capture Fe particles from 1 mm
Various dimensions and flange types
For belt width 400-1600 mm
Easy to install

Application

Application

Permanent ferrite suspended magnets (block magnets) consume no energy, which is one of the factors that makes them so price effective. These magnets remove ferromagnetic (Fe) particles as small as 0.5 mm (depending on the layer thickness on the belt).

Cleaning

Cleaning

Cleaning of the block magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning), by swinging the extractor plate away from the magnet; the Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field. Hereby you swing the extractor plate away from the magnet. The Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field.

Placement

Placement

A block magnet is hung above a conveyor belt, by means of chains or cables. The addition of these magnets can considerably boost separation yield:
 
Placement over pulley: In this configuration the magnet hangs at an angle over the end of the conveyor belt, where discharge of the material occurs. This is the ideal situation, because the bulk flow is ‘broken open’ at this point. When this happens, the iron particles are exposed within the surrounding material. This allows them to be more easily drawn to the magnet. Keep in mind, however, that it is important for the construction directly beneath the magnet to be made of non-magnetic material; otherwise it, too, will become magnetized.
 
Placement over band: This position is used for small layer thickness (or mono-layers). Or when there is no other option due to the potential for magnetization of underlying steel components (such as motors or guide rollers).

Working principle

Working principle

Suspended magnets (block magnets) remove undesirable ferromagnetic (Fe) particles such as iron and steel from material flows containing relatively little Fe contamination. They are placed above flat or trough-shaped conveyor belts. The metal particles are drawn out of the raw material flow and held by the magnet. This results in a pure iron fraction suitable for immediate reuse (recycling).
 
They are used to check incoming product flows and for the protection of machines, such as shredders and sieves. When heavy metal contamination is present, it is better to use an overbelt magnet; this type continuously carries away the iron particles.

EM70S General features
EM70S is an industrial terminal for data transfer, SMS and Fax through GSM networks.
Interfaces, connections and the integrated SIM card reader make this GSM modem universal, fast and simple for both home and industrial use for remote control, telemetry and telematics applications.
All interfaces are embedded in the container.
Quad band GSM / GPRS / EDGE device with manual and automatic selection of the 850/900/1800 / 1900MHz band.
Output power: Class 4 (2W for GSM850 and EGSM900), Class 1 (1W for DCS1800 and PCS1850) for sms, data and voice applications
Temperature: -40 to 85 ° C, -20 to 60 ° C recommended for the battery
Relative humidity: operation 5 ÷ 95% non-condensing, transport and storage 5 ÷ 95% external condensation only
Product: for EN-50022 rail, 4 modules, polycarbonate, UL94 -V0
Dimensions: 71 x 90 x 48 mm (W x H x D)
Weight: 200 g
Protection degree: IP40 (IEC 529) correctly installed

Filling valve (start-up valve) »FUTURA«, Size 4, G 1, Input pressure 2.5 - 16 bar, Temperature -10 °C to 50 °C
Seat valves operated by secondary pressure for controlled pressurisation of pneumatic systems.
These valves prevent a sudden build-up of pressure accompanied by dangerous, jerky cylinder movements.
The full cross-section of the regulator is opened at 50% of the input pressure.
The filling time can be altered by turning the adjusting screw.

Flat suction cup, oval, Material NBR, »SGO«, Ø30x10 suitable connection nipple IT G 1/8, suitable connection nipple ET G 1/8
Robust and hard-wearing suction pad with a single, oval-shaped sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to handle long or flat workpieces. Due to its oval shape, it has a considerably higher suction force than round, flat suction pads when handling narrow or long workpieces.
It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Higher suction force for narrow workpiecesSupports on the bottomHigh suction force in spite of small dimensions

Applications:
Handling narrow workpieces and stripsHandling workpieces with only a small, narrow gripping surface

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 32, Stroke 100, G 1/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way toggle lever valve, Hose side, Quick connector Hose 10/8, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Throttle check valve »Blue Series«, Supply air throttle, R 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Screw-in fitting for PVC pneumatic hose 9x11.6, Aluminium/plastic, Temperature -10 °C to 70 °C, PN -0,95 - 15 bar, G 3/8

T-piece, exterior / exterior / exterior, R 3/4, Operating pressure max. 60 bar, Operating temp. max. 150 °C, nickel-plated brass

Bracket 92, 90°, IT/ET, Rp/R 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

One-piece clamp coupling MAS both sides bore 30mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. The torques in the table are maximum values which can only be
achieved with perfect mounting and dimensional accuracy of the shaft.

Article ID: 60099630

Chain tensioner SPANN-BOY® TS 10 B-2 stainless steel
Material: Housing from stainless steel. Chain rider from low pressure polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C).
Article ID: 14040926

ECC15C2I – ECC20C2I General features
Nominal flow rate: Qn from 0,6 to 2,5.
Protection degree: IP54.
Calculator may be separated from the volumetric meter with a 30 cm small connecting cable, not extendable.
Compact dimensions for installation in small places.
Installation on the return pipe.
Power supply: 3V lithium battery.
Operation life: 6 years.
Type of probes: Pt100.
Volumetric unit temperature range: 5 ÷ 90°C.

Two-piece clamp coupling MAT both sides bore 30mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of nylon. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Article ID: 60093000

Ball head precision levelling adjuster with locknut MN 686.9 30-13.5
Material: 42CrMo4V, Nr. 1.7225, zinc plated and blue passivated. For non-parall surfaces up to 4° slope. Larger overall height with more adjustment travel. With lock nut. *the static net load Fadd can be calculated after subtracting the pre-load (steel bolt strength class 8.8, stainless steel bolt strenght 6.8) from the total load Ftot. Other sizes on request.

Article ID: 68693000

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 80, Stroke 175, G 3/8, Working pressure 1.5-10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Captive quick-connect coupling I.D. 5, Bright brass, G 1/8 ET, brown, max. 35 bar, Medium / ambient temp. -20°C to 100°C
One-hand quick disconnect couplings with a large bore.
Different media can be connected safely and non-interchangeably even when space is restricted, thanks to the colour-coded coupling and plug and the different coupling profiles defined for each of the four colours.
Only couplings and plugs of the same colour fit together.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive, food technology, aerospace.

Push-in L-connector, for hose exterior Ø 12 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.

Straight push-in fitting, round, R 3/8 o., Exterior hexagonal, Ø 8 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Throttle check valve »Blue Series«, Discharge throttle, R 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.