Flexible coupling EL nominal torque 10 Nm short version with pilot bore stainless steel 1.4305 overall length 50mm outer diameter 26mm
Material: Hub 1.4305. Spring: Spring steel 1.4310. These
couplings are elastic all-metal couplings and completely maintenance
free. The all-metal design leads to a strong resistance against oil and
higher temperature range: -40°C to +300°C. The elastic part consists of
a spring body, made up of three layers of wound springs. The couplings
are suitable for both rotating directions. They can be locked against
rotation with a feather key or with pins. The couplings are pressfitted.
Demounting is done by pressing or pulling off. Vibrations and shocks are
largely absorbed. Depending on the length of the coupling - S, L or Db -
bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft
diametre are possible. Couplings are available pre-drilled ex stock.
Customized bores and feather-key grooves available at surcharge.

Article ID: 60299010

Feather key DIN 6885 version A 4 x 4 x 18 mm material C45
Material: C45K.Version A.
Article ID: 61806800

Frequency:50 Hz
Speed:2710 1/min
Shaft Output:123 W
Volume Flow:468 m³/h
Pressure:Δp s492 Pa
Pressure:Δp t618 Pa
Density:43862 kg/m³
Sound Pressure:69 dB(A)

Le-600-Sl, 230V Ac, 20W Weight:0,556

Wind Speed and Direction
Pitch and Roll
Air Temperature
Low Temperature Operations
Barometric Pressure
Power Supply
Data Input/Output
3 Axis Accelerometer
Ultrasonic Transducers
Thermistor
Heater Element
Barometric Pressure
12 VDC Supply Current
Comma delimited ASCII/NMEA 0183 over RS422 or RS232

Length : 150 mm
BAR-ES-23-150-25-1M8-NW-B
SKU: SBAQA100030-150
Magnet quality: GSN-52
Interface/connection dim's: Threaded hole M8 (1x)
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 31,5 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Z42 – Z43 General features
Suitable for O41NCMAUX electrothermal actuator
Nominal pressure PN 16.
2-way valve in bronze.
3-way valve in nickel-plated brass.

Washer DIN EN ISO 7089 (DIN 125 A) for M20 (21,0x37,0x3,0mm) material stainless V4A
Material: Stainless steel V2A or V4A.
Article ID: 65399270

Ball transfer unit 350 with steel-sheet housing ball diameter 22mm completely from stainless steel
Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65435022

Valve disc for valve terminal HDM, Connection 6 mm, 2x 3/2-way, NC, monostable or 5/3-way, Centre vented
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.

Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.

Suitable for filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.

Monostable (non-latching) version of manual control also available on request.

The operating pressure is based on the installed input plates.

Angled bulkhead connector, M16x1.5, for hose 8/10 mm, AF 22, Working pressure max. 10 bar (20 °C)/max. 2.5 bar (90 °C), PP
Chemically resistant to almost all inorganic acids and bases, even in high concentrations and at temperatures greater than 90 °C.

Metal container incl. viewing tube, Automatic bleeder valve (integrated design), for filter / filter regulator »variobloc«, Size 1

Swing safety coupling I.D. 8, ISO 6150 C, Steel, NPT 1/4 ET, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Bracket 120, 45°, Rp 3/8 IT, Rp 3/8 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Push-in L-fitting »Blue Series« long, rotating, R 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Polyethylene hose (LD-PE), Temperature -10 °C to 60 °C, Hose Ø 5x3 mm, PN at 20 °C max. 16 bar, natural (milky), Roll of 25 m
Low-priced, calibrated hose for use with screw fittings.
With its soft and flexible character, combined with relatively high strengths and good resistance to stress cracking, this hose is ideal for use in the following types of application:

- Flexible pneumatic lines in the low-pressure range, providing no special resistance to greases, oils or other hydrocarbons is required.
- Compressed air control lines.
- Vacuum lines (suitable for vacuum up to 10 x 8 mm).
- Supply lines of all kinds.

Standard cylinder SAI, ISO 15552, double-acting, Piston Ø 32, Stroke 50, G 1/8, Working pressure 1.5 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on two sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Frequency:50 Hz
Speed:2720 1/min
Shaft Output:145 W
Volume Flow:496 m³/h
Pressure:Δp s492 Pa
Pressure:Δp t593 Pa
Density:43862 kg/m³
Sound Pressure:73 dB(A

Le-600-L, 230V Ac, 20W Weight:0,56

2 kW

Get more coverage under your boat with Airmar’s unique, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.

The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 152 m (500').

The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with coverage.

Length : 150 mm
BAR-ES-23-150-25-2M6-NW-B
SKU: SBAQA100020-150
Magnet quality: GSN-52
Interface/connection dim's: Threaded hole M6 (2x)
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 35 Homologation VDE | IMQ Dimension D x H (mm) 45 x 94 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Conductive liquids probes for A03-A04 series General features
Maximum operating pressure 10 bar.
Maximum temperature 160°C.
Connection male G 3/8″ (electrode not included).
Weight 48 gr.
Connection between the probe and the level control is realized through a single-pole flexible cable (not supplied).
Electrode probe is not supplied

Oil-level window SR 125 sight 104 x 18mm
Material: Aluminium with inserted disk of natural glass and Perbunan® seal.Rectangular shape, clear readability. Also diesel-oil resistant.Temperature resistant up to +120ºC.
Article ID: 68113300

Valve disc for valve terminal HDM, Connection 6 mm, 3/2-way, NC, Monostable and 3/2-way, NO, monostable
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.

Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.

Suitable for filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.

Monostable (non-latching) version of manual control also available on request.

The operating pressure is based on the installed input plates.

Angle flange, CETOP, Ø80, 1 piece with 4 screws
Angle flange, 1 piece with 4 screws

Dirt strainer, nickel-plated brass, Sieve insert mesh width 0.3 mm, Operating temp. -20 °C to 110 °C, G 2, DN 50, PN max. 20 bar
Suitable for domestic water services, heating and air conditioning plants or compressed air systems. Not suitable for steam.

Swing safety coupling I.D. 8, ISO 6150 C, Steel, NPT 3/8 ET, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Double threaded nipple, G 3/8 o., M16x1.5 o., AF 19, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Push-in L-fitting »Blue Series« long, rotating, G 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Polyethylene hose (LD-PE), Temperature -10 °C to 60 °C, Hose Ø 5x3 mm, PN at 20 °C max. 16 bar, yellow, Roll of 25 m
Low-priced, calibrated hose for use with screw fittings.
With its soft and flexible character, combined with relatively high strengths and good resistance to stress cracking, this hose is ideal for use in the following types of application:

- Flexible pneumatic lines in the low-pressure range, providing no special resistance to greases, oils or other hydrocarbons is required.
- Compressed air control lines.
- Vacuum lines (suitable for vacuum up to 10 x 8 mm).
- Supply lines of all kinds.

2-ear hose clamp, Steel bright galvanised (W1), Clamping range 28.0 - 31.0 mm, Belt width 9.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Feather key DIN 6885 version A 3 x 3 x 16 mm material C45
Material: C45K.Version A.
Article ID: 61803600

Locking assembly COM-A stainless steel 1.4401 bore 35mm size 35-60
Material: Stainless steel 1.4401 (SS316).

Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps. Demounting: Due to the cone angle,
the clamping set is usually released once all screws have been fully
unfastened. There a three large threads cut into the front ring, which
serve to remove this ring.

Ts - Fastening Torque

T - Transmittable Torque

F - Transmittable Axial Force

P - Surface Pressure onto Hub

Article ID: 61599535

Frequency:50 Hz
Speed:1320 1/min
Shaft Output:33 W
Volume Flow:339 m³/h
Pressure:Δp s110 Pa
Pressure:Δp t128 Pa
Density:43862 kg/m³
Sound Pressure:58 dB(A)

Closing Cap Weight:0,58

1 kW

Get more coverage under your boat with Airmar’s unique, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.

The included high-performance fairing improves broadband results at speeds over 30 knots (34 MPH).

The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 152 m (500').

The low-frequency band and 1 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducers with coverage.

Length : 150 mm
BAR-ES-23-150-25-2M8-NW-B
SKU: SBAQA100040-150
Magnet quality: GSN-52
Interface/connection dim's: Threaded hole M8 (2x)
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 40 Homologation VDE | IMQ Dimension D x H (mm) 45 x 94 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

M23 General features
Press-forged brass valve body OT58 UNI 5705.
Gaskets in NBR (Buna N) – Viton.
Rod in stainless steel AISI 304.
Core in stainless steel AISI 430F.
Spring in stainless steel AISI 302.
Antivibration brass ring.
Operating temperature: -10 ÷ 90°C.

Precision worm centre distance 63mm i=19
Material: Steel 11SMnPb30, inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency.

Article ID: 33041900

Valve disc for valve terminal HDM, Connection 6 mm, 5/3-way, Centre closed, Temp. -10 °C to 60 °C
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.

Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.

Suitable for filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.

Monostable (non-latching) version of manual control also available on request.

The operating pressure is based on the installed input plates.

Double threaded nipple, Cylindrical, G 2 o., G 3 o., AF 89, Brass
As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.
Dimensions may vary slightly.

Short stroke cylinder, double-acting, Magnet, Piston Ø 20, Stroke 25, M5, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
Suitable for installation in limited spaces.
Supplied with magnet.
Suitable for filtered compressed air, lubricated (ensure continuity) or unlubricated.

Swing safety coupling I.D. 8, ISO 6150 C, Steel, NPT 1/2 ET, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

These safety couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Bulkhead fitting G 3/8 o., G 1/4 i., AF1 19, AF2 19 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Kamlok cap plug, DP type, Stainless steel 1.4401, Size 3/4, Plug Ø 32 mm, Operating pressure max. 16 bar, Temp. -20 °C to 95 °C
High-quality, robust, universal coupling system with a safety clamp for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok stainless steel couplings are designed for use with corrosive media in the chemical and petrochemical industries, steelmaking, shipbuilding, agriculture, etc.

All female threaded couplings and connectors are with female thread sealing ring made of PTFE.

Polyethylene hose (LD-PE), Temperature -10 °C to 60 °C, Hose Ø 5x3 mm, PN at 20 °C max. 16 bar, black, Roll of 25 m
Low-priced, calibrated hose for use with screw fittings.
With its soft and flexible character, combined with relatively high strengths and good resistance to stress cracking, this hose is ideal for use in the following types of application:

- Flexible pneumatic lines in the low-pressure range, providing no special resistance to greases, oils or other hydrocarbons is required.
- Compressed air control lines.
- Vacuum lines (suitable for vacuum up to 10 x 8 mm).
- Supply lines of all kinds.

RSGU pipe clamp, galvanised steel (W1), with rubber profile, D1 shape acc. to DIN 3016, Clamping range 15.0 mm, Belt width 15.0 mm
Acc. to DIN 3016, type D1.
For fastening hoses, pipes, compressed air lines and cables.
Rubber profile protects against vibrations and creeping water.

Feather key DIN 6885 version A 5 x 5 x 18 mm material C45
Material: C45K.Version A.
Article ID: 61809800

Clamping bush MSD bore 30mm steel
Material: Steel. The MSD clamping bush consists of a
double-walled, hardened steel sleeve filled with a special pressure
medium, a seal, a piston, a compression flange and fastening screws.
When tightening the screws, the sleeves expand evenly against shaft and
hub, creating a rigid connection. When the screws are loosened, the bush
returns to its initial position and can be easily demounted.
Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for
Product No. 615 215 00 only h7), Hub H7 Advantages: -fast
mounting/demounting -sensitive adjustment of the hub can be carried out
during assembly -low fastening torque and few screws allow very simple
assembly. -good concentricity -small dimensions allow little ouside
diametre of the hub MN = transmittable torque at load of 0. If the
screws are fastened with Manz. Fa = transmittable axial force at torque
of 0. If the screws are fastened with Manz. Manz = required fastening
torque for the screws. The dimensions refer to bushes before assembly. Temperature
range: -30° to +85°C.

Article ID: 61523000

Frequency:50 Hz
Speed:1395 1/min
Shaft Output:56 W
Volume Flow:434 m³/h
Pressure:Δp s168 Pa
Pressure:Δp t214 Pa
Density:43862 kg/m³
Sound Pressure:62 dB(A)

With Terminal Weight:0,58

1 kW

Get more coverage under your boat with Airmar’s unique, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.

The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 152 m (500').

The low-frequency band and 1 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with coverage.

New Product

Keep your transducer signal clear with the best foul-release technology on the market.

Learn More

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 45 Homologation VDE | IMQ Dimension D x H (mm) 50 x 94 Pcs x bag 50

Flexible Leads / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.