Throttle valve, Both sides throttling (»B«) Push-in connector hose 8, G 1/8, PN max. 10 bar, Temperature 0 °C to 70 °C
For regulation of a cylinder piston speed at both ends and control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece for mounting directly.
On the version with a knurled screw, the set volumetric flow rate can be locked with the hexagon nut to obtain a fixed setting.

T-fitting, Pipe exterior Ø 15 mm, PN max. 315 bar, Stainless steel 1.4571

2/2-way toggle lever valve, both sides, Quick connector for hose 8/6, G 1/4, PN max. 8 bar, Temperature 0 °C to 70 °C
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Push-in fitting 45° »Blue Series«, rotating, R 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Bulkhead fitting, Exterior thread M16x1.5, Interior thread 1/8, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Standard pressure gauge, Double scale, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0-4 bar/58 psi, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Stoppers 290, beaded, R 1/4 ET black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Y hose connection supports, for hose I.D. 4 mm, Bracket 90°, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

T-multi-distributor »Blue Series«, rotating, R 1/4 o., for hose exterior Ø 4x8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Reducing fitting, Sealing cone, Nut M22x1.5 i., Pipe exterior Ø1 15 mm, Pipe exterior Ø2 8 mm, PN max. 315 bar, galvanised steel
Reducer, with cone seal, light type

Hinge pin clamp, Chrome steel 1.4016 (W2), Clamping range 40.0 - 43.0 mm, Belt width 20.0 mm, rec. tightening torque 8.0 Nm
For use with our industrial water, rubber, suction and discharge hoses.

Frequency:50 Hz
Speed:1390 1/min
Shaft Output:261 W
Volume Flow:1600 m³/h
Pressure:Δp s356 Pa
Pressure:Δp t386 Pa
Density:43862 kg/m³
Sound Pressure:72 dB(A

Humidity + Temperature Sensor 1.5 Mtr. Weight:0,24

Whether you're blue-water fishing offshore or fishing along a tidal estuary, finding temperature breaks where two bodies of water collide can make the difference in locating fish. The HT200 has a large surface area that offers a super-fast, 0.15 second, time response to changes in water temperature. Simply overlay the nautical chart or sounder screen with the temperature readout and watch for temperature changes and fish strikes. Marking the line between hot and cold temperatures is crucial—and using the HT200 will ensure you don't go home empty handed!

Airmar's Smart™ Sensors have embedded microelectronics—the and signal processor are only millimeters apart. The signal is processed right inside the housing itself. All that is needed to receive temperature data is a single cable into a compatible network or display. Available as an analog sensor or a digital Smart Sensor that can output in NMEA 0183 or NMEA 2000® standard.

Length : 300 mm
SVM-F-114x47-0300-B-F0E
SKU: SVMF010300
Stock *: 0
Advised max. installation height: 50-65 mm
Height: 47 mm
Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream equipment.

Max. installation height 140 mm
Low overall height
With neodymium or ferrite magnets
For recycling or metal separation

Application

Application

Ferrite magnetic plates (plate magnets) remove ferromagnetic (Fe) particles as small as 0.5 mm. An advantage is that they are suitable for use at higher temperatures (250°C), but they are not suitable for capturing stainless steel scrapings.
 
The dimensions are selected based on the desired holding field depth: the deeper the field, the heavier and larger the magnet becomes. For this reason one often opts for the more compact and equally strong neodymium (Neoflux®) plate magnets.

Placement

Placement

Overbelt placement or installation in/against a free-fall line. For placement in a free-fall line Goudsmit also supplies mounting plates (see also chute magnets). This makes dust-proof mounting possible and makes them easy to clean.
 
For a width in excess of 300 mm a neodymium magnet is recommended for installation in a free-fall line. In such applications ferrite plate magnets are too heavy for manual cleaning. If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Design

Goudsmit builds plate magnets for mounting above production lines that feature 'flux control' to create a deeper holding field. These have extra magnets between the poles that cause the lines of flux to penetrate deeper into the product flow. A ridge prevents captured iron particles from being carried away again by the product flow.


Cleaning

Cleaning

Cleaning of the plate magnet is performed manually (by wiping) or through use of an extractor plate (quick cleaning). Hereby you swing the extractor plate away from the magnet. The Fe particles fall off of the extractor plate as soon as they are moved far enough away from the magnetic field. For quick cleaning, see also chute magnets.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 15 Homologation VDE | IMQ Dimension D x H (mm) 40 x 70 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Z52 – Z53 – Z53PT General features
2/3 way / by-pass.
Nominal pressure 16 bar.
Differential pressure 16 bar.
Maximum pressure +100°C.

Cylindrical ball screw nut 16x5mm height 34mm outer diameter 28mm
Material: Bearing steel 100Cr6, No. 1.3505.To be combined with Maedler® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Article ID: 64016056

Filter »FUTURA« with metal container and viewing tube, 5 µm, Size 4, G 1, 1.5 - 16 bar, Temp. -10 °C to 50 °C, Semi-automatic
Filters with excellent flow rates in modern design.

Blocking valve »Blue Series«, G 1/4 o., G 1/4 o., Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Dirt strainer, nickel-plated brass, Sieve insert mesh width 0.5 mm, Operating temp. -20 °C to 110 °C, G 2, DN 50, PN max. 20 bar
Suitable for domestic water services, heating and air conditioning plants or compressed air systems. Not suitable for steam.

2/2-way toggle lever valve, both sides, Push-in connector hose 10, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Push-in fitting 45° »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Sintered bronze silencer, Slot, G 1/4, Operating pressure max. 10 bar, Operating temperature -10 °C to 250 °C
Silencer, sintered bronze, short

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 16 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Stoppers 290, beaded, R 3/8 ET black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Protective cap, for »speedfit« series, black, for pipe exterior Ø 18 mm, POM

Adjustable straight screw-in fitting, 360° rotating, M18x1.5 i., G 3/8, Pipe exterior Ø 12 mm, PN max. 315 bar, galvanised steel

GEKA hose piece, rigid, Potable water, bright brass, G 1 1/4 o., Operating pressure max. 40 bar, Med./ambient temp. -10°C to 90°C
GEKA-Kupplungen für Trinkwasser, Serie »GEKA-plus«, Messing blank, mit KTW-Zulassung

Screw-on hose connector, G 1/4 i., for hose I.D. 8, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Sealing cap for angle joint DIN 71802 size 13 outer diameter 17mm
Material: Neoprene, black.

The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C).


Article ID: 63677800

Frequency:50 Hz
Speed:1390 1/min
Shaft Output:261 W
Volume Flow:1600 m³/h
Pressure:Δp s356 Pa
Pressure:Δp t386 Pa
Density:43862 kg/m³
Sound Pressure:72 dB(A)

Sw 27, Polyamide Gf Weight:0,25

200 kHz EchoRange Smart Sensor
Airmar’s Smart™ sensors feature embedded microelectronics that process depth and temperature inside the sensor that can be instantly displayed on any device that accepts NMEA data. EchoRange technology transfers NMEA 0183 data in real time to a computer via the RS422 standard.

200 kHz EchoRange+ Smart Sensor -With Echo Envelope Developer Option.
Exclusive to OEM’s, available for purchase only through Airmar USA.
In addition to the bi-directional NMEA 0183 interface, a secondary transmit only interface with a proprietary protocol using RS485 is available to OEMs. The user can obtain detailed echo envelope data which may be displayed as an analog waveform. The echo envelope is a 900-point time-series of the echo amplitude. By analyzing the shape of the echo envelope, information indicative of the seafloor type is revealed.

Applications
Bridge scour inspection systems
Portable hydrographic survey
Dredging
Autonomous Surface Drones
Hydrodrones
Looking for a Dual frequency EchoRange™ Smart™ Sensor?

Size : 24 mm
HGR-SQ-024-FP-R-M-F
SKU: TPGC024088
Stock: 111
Max. tear off force: 24 N
Advised working load: 8 N
With magnetic grippers, you automatically pick up flat steel products or sheets up to 10 mm thick. They are quick and easy to switch, and specially designed for transferring, placing or positioning using a robotic arm.Magnetic grippers serve as end of arm tooling for sheets. They even hold perforated sheets effortlessly.

For sheets up to 10 mm thick
Switching: pneumatic
For robot End-of-arm tooling
Lifting power: up to 45 kg
Permanent magnet

Application

End of arm tooling

Magnetic grippers are ideal when you want to pick up, place or position flat, steel products with a robot. The applications are very diverse, such as:

pick-and-place of steel parts
handling perforated sheets with a robot arm
unstacking workpieces from crates (bin picking)
positioning sheets in presses
stacking or unstacking hot baking tins

The high temperature gripper is suitable for this last example. For example, you can also use it to load and unload high-grade steel in a press; it is formed at high temperatures.


Operation

Switching and control of the magnet gripper

The magnet gripper switches pneumatically. This moves the magnetic field and switches it on and off.
Control can be with a 5/3 or possibly a 5/2 valve.
An activated magnet gripper does not release its load, even if the air pressure or power supply is lost. This makes it a safe and reliable end-of-arm solution.

Practical tips

Things to look out for when using magnetic grippers:
When working with thin sheets (≤1 mm) you must consider the ‘peeling off effect’. This reduces the maximum breakaway force. In this situation, it is better to create a construction with multiple smaller grippers (e.g. 40 x 40 mm) than one or two large grippers.
A sheet can be damaged when the gripper contacts the sheet. If this is a problem, choose the version with a protective polyurethane cap (friction type).
When working with oiled sheets or with high acceleration of the robotic arm, a sheet can shift position. This, too, can be prevented through use of the type with a polyurethane friction pad.
Sometimes the surface of a sheet is not flat, so the vacuum does not work. In this case, magnetic grippers are an ideal solution. The more contact surface area the better, but a magnet gripper always works on ferromagnetic steel. Thus on round shapes too.
The vacuum does not work when there are holes in the sheet; the magnet gripper does. In this case, choose a gripper with larger dimensions than the hole, and test the chosen solution thoroughly.
For small workpieces, Goudsmit has very small grippers in the assortment. They have a low overall height and give extra strength to hold the workpiece in place. For example, choose type HGR-RO-020.
For thin sheets (≤4 mm) and oily sheets that stick together, the robot sometimes picks up several sheets together. Sheet separators prevent this. They are available both in permanent and pneumatically switchable versions.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 16 Homologation VDE | IMQ Dimension D x H (mm) 40 x 70 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

C08 General features
Bimetal operation
Immersion mounting with brass sheath with connection Gc 3/8-PN10 (included).
Bimetal sensitive element
Base, cover and knob in shock-proof selfextinguishing thermoplastic V0.
Compliance with standards CEI EN 60947-5-1.
VDE approval.
Electric features
Cod. G25: copper sheath Gc 3/8 PN10 bar, length 220 mm, Ø 8mm
Cod. 303298LA: G1/2 cable gland in V0 self-extinguishing, shockproof thermoplastic material for output connections

Open Linear ball bearing KB-3-O ISO series 3 with shields for shaft Ø 25mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64602501

Round cylinder »MI«, double-acting, Magnet, Piston Ø 40, Stroke 500, G 1/4, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Throttle valve, Both sides throttling (»B«) push-in connector hose 8, G 1/4, PN max. 10 bar, Temperature 0 °C to 70 °C
For regulation of a cylinder piston speed at both ends and control of flow rates.
Designed as a banjo-type valve with a hollow bolt and ring piece for mounting directly.
On the version with a knurled screw, the set volumetric flow rate can be locked with the hexagon nut to obtain a fixed setting.

Compact cylinder »ACP«, double-acting, Piston Ø 32, Stroke 65, Connection G 1/8, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

2/2-way toggle lever valve, both sides, Quick connector for hose 10/8, G 1/4, PN max. 8 bar, Temperature 0 °C to 70 °C
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Reducing sleeve, round, G 1/2 i., G 1/8 i., Working pressure max. 20 bar, Stainless steel 1.4408

T reducing supports, for hose I.D. 12/10/12 mm, Over-pressure max. 10 bar, Temperature range -40 °C to 90 °C, POM
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 10 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Stoppers 290, beaded, R 1/2 ET black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

1-ear hose clamp, Steel bright galvanised (W1), Clamping range 14.0 - 16.0 mm, Belt width 6.0 mm

Double threaded nipple, R 3/4 o., R 3/4 o., AF 28, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Screw-in hose connector, G 1 o., for hose I.D. 25 mm, AF 38, brass, Max. working pressure 25 bar, Max. operating temperature 150°C

Screw-in hose connector, G 1/8 o., for hose I.D. 10, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Sealing cap for angle joint DIN 71802 size 16 outer diameter 21mm
Material: Neoprene, black.

The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C).


Article ID: 63678000

Locking assembly BAR stainless steel 1.4401 bore 28mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.

Frequency:50 Hz
Speed:2875 1/min
Shaft Output:1281 W
Volume Flow:2730 m³/h
Pressure:Δp s1233 Pa
Pressure:Δp t1321 Pa
Density:43862 kg/m³
Sound Pressure:95 dB(A)

2X1,5Mmâ² White Weight:0,26

With Echo Envelope Developer Option. Exclusive to OEM’s. Available for purchase only through Airmar USA.
Airmar’s Smart sensors feature embedded microelectronics that process depth and temperature inside the sensor that can be instantly displayed on any device that accepts NMEA data. EchoRange technology transfers NMEA 0183 data in real time to a computer via the RS-422 standard. In addition to the bi-directional NMEA 0183 interface, a secondary transmit only interface with a proprietary protocol using RS485 is available to OEMs. The user can obtain detailed echo envelope data which may be displayed as an analog waveform. The echo envelope is a 900-point time-series of the echo amplitude. By analyzing the shape of the echo envelope, information indicative of the seafloor type is revealed.

Applications

Hydrographic survey
Dredging
Bottom Characterization
Autonomous Surface Drones
Hydrodrones
Looking for Single frequency EchoRange Smart™ Sensor?