Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ40, Stroke200, G1/8, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Extension pipe for basic air guns, with star-tip nozzle, 300 mm straight

T-multi-distributor »Blue Series«, 4-fold, rotating, R 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series«, rotating, G 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Standard pressure gauge, Single scale bar, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0 - 2.5 bar, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Screw-in hose connector, O-ring »value line«, G 1/8, for hose I.D. 8, Operating pressure max. 60 bar, Operating temp. max. 80 °C
For air, water, steam, oil, etc.

Worm thread - hose clamp »blow line«, Chrome steel (W2), Belt width 9.0 mm, Clamping range 10.0 - 16.0 mm

Fitting 330, flat sealing, IT/IT, Rp/Rp 3/4, black malleable iron fitting, Operating temp. -20 °C to 200 °C, ISO 7-1
Maximum temperature and maximum operating pressure should not occur at the same time!

According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Worm thread hose clamp, Steel bright galvanised (W1), Clamping range 142.0 - 177.0 mm, Belt width 20.0 mm
Worm-drive type.

Extremely robust hose clamps for all applications where heavy loads occur and high forces are transmitted.

Hexagon-head screw slotted, a/f 13, bright galvanised steel, passivated blue.

Angled screw-in fitting »value line«, rotating, G 1/4 o., for hose exterior Ø 8 mm, Operating pressure max. 16 bar
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.

Flexible coupling EL nominal torque 5Nm short version with pilot bore stainless steel 1.4305 overall length 35mm outer diameter 21mm
Material: Hub 1.4305. Spring: Spring steel 1.4310. These
couplings are elastic all-metal couplings and completely maintenance
free. The all-metal design leads to a strong resistance against oil and
higher temperature range: -40°C to +300°C. The elastic part consists of
a spring body, made up of three layers of wound springs. The couplings
are suitable for both rotating directions. They can be locked against
rotation with a feather key or with pins. The couplings are pressfitted.
Demounting is done by pressing or pulling off. Vibrations and shocks are
largely absorbed. Depending on the length of the coupling - S, L or Db -
bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft
diametre are possible. Couplings are available pre-drilled ex stock.
Customized bores and feather-key grooves available at surcharge.

Article ID: 60299005

Locknut UW with integral locking device M80x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399480

Frequency:50 Hz
Speed:2820 1/min
Shaft Output:626 W
Volume Flow:1490 m³/h
Pressure:Δp s1121 Pa
Pressure:Δp t1197 Pa
Density:43862 kg/m³
Sound Pressure:78 dB(A)

Impeler TLR 146x74 RE 5C/14 H7
Rotation: clockwise galvanized stee

Lex-350-Bt, 24-265V Ac/Dc, 6W Weight:0,22

100 W

The B122 is a long-stemmed transducer designed for use in thick-hulled, wooden boats or vessels with a steep deadrise. The included high-performance fairing vertically orients the beam for strong return echoes, resulting in optimal performance even at higher speeds. And being a retractable design, the insert can be removed for servicing or storage.

Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signals from the depth transducer and are processed right inside the housing itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display.

NOTE: The B122 is also available in an analog version.

Length : 100 mm
BAR-HT-23-100-25-2M6-NW-B
SKU: SBANA100020-100
Interface/connection dim's: Threaded hole M6 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 11 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Lockshield valve series 158 General features
Available with chrome frame finish
Micrometric regulation
Maximum pressure 10 bar
Auger retention with EPDM O Ring
Teng retention with O Ring
Thread according to UNI ISO 228
Body made of brass

Spur gear made of polyketone die-cast with hub module 0.5 15 teeth tooth width 3mm outside diameter 8,5mm
Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load.
Article ID: 28101501

Linear ball bearing KB-3 ISO series 3 with shields for shaft Ø 40mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Other, self-aligning versions on request. Stainless version on request.

Article ID: 64604000

Filter regulator »FUTURA«, with PC container, Protective cage, Pressure gauge, 5 µm, Size 2, G 3/8, Control range 0.5-8 bar, Fully
Filter regulators with excellent flow rates in modern design.
The regulator knob can be latched and locked.

Polycarbonate container with manual bleeder valve, for microfilter »variobloc«, Size 1, G 1/4 and G 3/8

Angled bulkhead fitting, Pipe exterior Ø 12 mm, PN max. 315 bar, Stainless steel 1.4571

2/2-way toggle lever valve, both sides, Push-in connector hose 6, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Push-in fitting 45° »Blue Series«, rotating, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight push-in fitting »Blue Series«, G 1/8 i., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Standard pressure gauge, Double scale, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0-10 bar/145 psi, Ø 50
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

1-ear hose clamp with insert ring, Steel bright galvanised (W1), Clamping range 15.0 - 17.3 mm, Belt width 8.8 mm
An absolutely safe all around setting is ensured by the pre-mounted insert ring. Suitably for use with soft and sensitive hose material.

Swivel nut, M16x1.5, Pipe exterior Ø 8 mm, PN max. 630 bar, a/f1 19, galvanised steel
Swivel nut, heavy type

Fitting 331, flat sealing, R 1/2, Rp 1/2, black malleable iron fitting, operating temp. -20 °C to 200 °C, ISO 7-1
Maximum temperature and maximum operating pressure should not occur at the same time!

According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Push-in L-fitting »Blue Series«, Self-locking, R 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Nipple for couplings I.D. 7.2 - 7.8, hardened / galv. steel, G 3/8 ET, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Locknut UW with integral locking device M85x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399485

Frequency:50 Hz
Speed:2830 1/min
Shaft Output:813 W
Volume Flow:1657 m³/h
Pressure:Δp s1125 Pa
Pressure:Δp t1241 Pa
Density:43862 kg/m³
Sound Pressure:78 dB(A)

Ø306x297+25 (SW) 51422-1.735
Type of Filter: Round Filter
Material: Steel
Varnishing: RAL9005 Deep Black
Filter Mat:
Material: High-performance nonwoven made of Polyolenfin fibres with thermal fiber
Bonding
Filter Category: G4
Seal: Klett
Heat resistant up to 100 ° C
Weight: 2,5 kg

230V Ac, With Display, 2 Relay Output, 2 X No Weight:0,23

High-Precision Temperature

The B17-HP, high-precision responds quickly and accurately to temperature changes. The 25 mm (1") bronze button on the sensor’s face along with the specialized fast-response thermistor provide a five-second time constant and ±0.3ºC (±0.17ºF) accuracy. This Smart™ Sensor can output precision-temperature data to a fishfinder, chart plotter, digital display, or computer. The top-of-the-line B17-HP is ideal for commercial and sport-fishing applications, helping skippers detect thermal boundaries and eddies which attract bait concentrations and game fish.

Manufacturer part Numbers
Furuno—HT-MSE——Airmar—44-026-2-91

Length : 100 mm
BAR-HT-23-100-25-2M8-NW-B
SKU: SBANA100040-100
Interface/connection dim's: Threaded hole M8 (2x)
Magnet quality: GSN-42SH
Max. operating / product temperature: 140 °C
These very strong neodymium magnetic bars are designed to remove small ferromagnetic contaminants from your pipeline bulk streams. Our strongest types can even remove fine weakly magnetic contamination, such as stainless steel 316 wear particles. Magnetic bars are the building blocks of many magnetic filtering systems, like our magnetic grids, Cleanfow magnets and magnetic filters for pressure lines.Our magnetic bars come in various magnet qualities, sizes, interface connections, robustness, etc. All types are equipped with a waterproof welded stainless steel 316L housing, and a smoothly polished surface.

Neodymium magnets (N42/42SH/52)
Very powerful
Watertight
Length 100-600 mm
Pipe/tubing material AISI316L

Application

Filtering magnetic contaminations from product flows

These very powerful Neoflux® (neodymium) magnetic bars / magnetic rods remove very fine ferromagnetic (Fe) metal particles and even weakly magnetic particles, such as those originating from machined stainless steel and iron oxides, from product streams.
 
Magnetic bars are the building blocks for magnetic grids, Cleanflow magnets and magnetic filters.

Design

Construction & materials data

As standard, the magnetic bars have a waterproof welded stainless steel housing, which protects the magnets and pole plates in the bar from corrosion. The bars have a smooth surface that is easy to clean.

Materials - in contact with product: AISI316L (SS 1.4404)
Connections: 1 or 2 x M6 or M8
Magnet qualities:

GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (10,700 gauss on tube Ø23)
GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 140 °C. (10,700 gauss on tube Ø23)
GSN-52, Br 14,800 gauss (at 20 °C), Tmax. 80 °C. (11,400 gauss on tube Ø23)


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 12 Homologation VDE | IMQ Dimension D x H (mm) 35 x 70 Pcs x bag 50

Twin Cable / M8 STUD
The MK 450 capacitors are suitable for the heavy duty motor
applications.

Lockshield valve series 158 General features
Available with chrome frame finish
Micrometric regulation
Maximum pressure 10 bar
Auger retention with EPDM O Ring
Teng retention with O Ring
Thread according to UNI ISO 228
Body made of brass

Spur gear made of polyketone die-cast with hub module 0.5 16 teeth tooth width 3mm outside diameter 9mm
Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load.
Article ID: 28101601

Linear ball bearing KB-3 ISO series 3 with Dichtung for shaft Ø 40mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64614000

Filter regulator »FUTURA«, with PC container, Protective cage, Pressure gauge, 5 µm, Size 2, G 1/2, Control range 0.5-8 bar, Fully
Filter regulators with excellent flow rates in modern design.
The regulator knob can be latched and locked.

Polycarbonate container with manual bleeder valve, for filter and filter regulator »variobloc«, Size 1, G 1/4 and G 3/8

Filter element 0.3 µm, Paper-POM, for pre-filter »FUTURA« and »multifix«, Size 1, G 1/4, G 3/8, for fully automated bleeder valve

2/2-way toggle lever valve, both sides, Push-in connector hose 8, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Push-in fitting 45° »Blue Series«, rotating, G 1/4 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight push-in fitting »click-clock«, G 1/8 i., for hose exterior Ø 5 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Standard pressure gauge, Double scale, Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0-2.5 bar/36 psi, Ø 63
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Stopper O-ring »value line«, G 1/4, Hexagonal socket 6.0 mm, Operating pressure max. 60 bar, Operating temperature max. 80 °C
For air, water, steam, oil, etc.

Straight screw-in supports, R 1/8 o., for hose I.D. 4 mm, AF 10, Over-pressure max. 10 bar, Temperature range -40°C to 90°C, PA 6
Lightweight tube connectors distinguished by high strength, toughness, resistance to abrasion and impact resistance.

Resistant to the following chemicals:
Acetone, benzine, benzene, butane, alcohols, diesel fuels, crude oil, natural gas, ethanol, fruit juices, glycerine, fuel oil, hydraulic fluids, aliphatic ketones, carbon dioxide, carbonic acid, engine oils, methanol, propane, liquefied gas, lubricating oils, lubricating greases, town gas, washing liquor and water.

Push-in L-fitting »metallica«, M5 o., for hose exterior Ø 4 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Push-in L-fitting »Blue Series«, rotating, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Nipple for couplings I.D. 7.2 - 7.8, hardened / galv. steel, G 1/4 IT, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Locking assembly BAR stainless steel 1.4401 bore 16mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.