Standard pressure gauge, Double scale, Connection, rear, centr., G 1/8, Goods class 1.6, Measurement range 0-25 bar/360 psi, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Clamping jaw clamp, Lightweight design according to DIN 3017, Steel bright galvanised (W1), Nominal Ø 17 mm, Belt width 9 mm
Lightweight type acc. to DIN 3017.
Applications: Soft air and fuel hose types, optimal seal, high clamping force around the hose, suitable for car dealerships, repair shops and pneumatic applications.

Protective cap, for »speedfit« series, black, for pipe exterior Ø 15 mm, POM

Bulkhead fitting »value line«, M26x1.5 o., G 3/8 i., Operating pressure max 60 bar, Operating temp. max 150°C, nickel-plated brass
For air, water, steam, oil, etc.

Double threaded nipple, G 1/4 o., G 3/8 o., Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Kamlok cap plug, DP type, Aluminium, Size 3/4, Plug Ø 32 mm, Operating pressure max. 16 bar, Temp. max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Locking assembly BAR stainless steel 1.4401 bore 11mm
Material: Stainless steel
1.4401 (SS316).
For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.

Stainless steel.

For low torques.

Self-centering.

Slight axial offset possible during assembly. Fit, Surface:
Due to the special design of the BAR clamping set even rough fits can
be bridged with excellent self centering capacity. Shaft and hub up to
Quality h8/H8. Surface finish for shaft and hub 10µm.

Twin Circuit
Diaphragm Operated
Static Pressure
Ranges -1 to 40 bar

Frequency:50 Hz
Speed:1330 1/min
Shaft Output:78 W
Volume Flow:534 m³/h
Pressure:Δp s261 Pa
Pressure:Δp t310 Pa
Density:43862 kg/m³
Sound Pressure:67 dB(A)

88609-1.620 2D 56 K50-2W C-1
120/150 W
Motor+FAN
Three-phase motor
Rated Power: 120/150 watts
Protection Category: IP54
Insulation Class: F
Number of Poles: 2
Weight: 2.9 kg

With Filter Mat P15/150S And Gasket Weight:0,15

1 kW

The M265LM Chirp-ready transducer is a perfect mid to deep-depth transducer. The huge bandwidth includes many of the most popular frequencies for targeting top gamefish. This 1 kW powerhouse transducer delivers clear target details, bottom discrimination, as well as bait and game-fish separation at all depths. The low-frequency band provides deep-water performance down to 914 m (3,000') and is a good choice when scouting an area or fishing in deeper depths. The medium-frequency band is excellent for identifying targets suspended close to the bottom on structure and within the water column.

The Sealcast™ M265LM includes a plastic tank which is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the tank and adjusted for the proper deadrise offset, insuring the beam is shooting straight down for maximum echo returns. Antifreeze is the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for boats up to 11 m (36') with a solid-fiberglass hull.

Low frequency 42 to 65 kHz/Medium frequency 85 to 135 kHz

Diameter : 35 mm
HEPM-EP-D035-028-SW
SKU: GM17853
Stock: 11
Max. holding force: 160 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 30 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

EC General features
Case in thermoplastic material
Linearised NTC 10k thermistor heat-sensitive element
Bipolar terminal board
Protection degree IP55
Cable gland G 1/4
Operating temperature: -40 ÷ 80°C

Bevel gearbox KEK size 4 ratio 1:1 shaft diameter 12mm housing length 46mm
Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.
Article ID: 41000104

Unmounting tool
For Pneufit-Push-In or Pneufit C connectors.

Article ID: 86999990

1 inch, 130 C

Push-in L-fitting, rotating, G 1/2 o., for hose exterior Ø 16 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Storz adapter, Aluminium, Storz size 25-D, Tappet distance 31 mm, G 1 ET, Operating pressure max. 16 bar, Temp. -40 °C to 110 °C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

Filter »variobloc« with metal container incl. viewing tube, Size 1, G 3/8, Input pressure max. 20 bar, Manual bleeder valve
Centrifugal separators with a sintered filter element.
Filtration takes place in a 2-stage process comprising cyclone separation (condensate) and a PE filter element (particles).
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Compact cyl.ISO 21287, single-acting, female piston rod,retr.,magnet,PistonØ16,Stroke10,M5,Work.press.max.10bar,Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Push-in T-fitting »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Stopper, Hexagonal, G 1/2, AF 26, Working pressure max. 20 bar, Stainless steel 1.4408

Standard pressure gauge, Single scale bar, Connection, rear, centric, G 1/8, Goods class 1.6, Measurement range 0 - 6 bar, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Coupling nut, M14x1, for hose 10/8 mm, AF 16, Working pressure max. 18 bar, nickel-plated brass

Cutting ring, Pipe exterior Ø 8 mm, PN max. 315 bar, galvanised steel
Ferrule, light type

Screw-on hose connector, G 1/2 i., for hose I.D. 16, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Angled bulkhead fitting, Pipe exterior Ø 6 mm, PN max. 315 bar, AF1 14, AF2 17, AF3 12, galvanised steel
Bulkhead elbow connector, light type

Replacement seal for Storz coupling, made of NBR, Storz size 110-A, Tappet distance 133 mm

Retaining ring DIN 471 17mm
Material: Feather steel, phosphated, oiled. External rings for
axial fixing a machine part on a shaft.

Article ID: 61741700

Twin Circuit
Diaphragm Operated
Static Pressure
Ranges 5 to 400 mbar

Frequency:50 Hz
Speed:1400 1/min
Shaft Output:79 W
Volume Flow:556 m³/h
Pressure:Δp s246 Pa
Pressure:Δp t300 Pa
Density:43862 kg/m³
Sound Pressure:61 dB(A)

2D 56 K50-2W 120/150W

Dın A5 Portrait Format, Foil, Transparent Ve=10 Pc Weight:0,158

600 W*

It’s a thru-hull, Chirp transducer perfectly suited for smaller fishing boats. The B765LM gives the performance of the larger transducers but in a compact package for smaller boats. A great combination of low and medium-frequency bands provides a wide range of depth capability and fish finding. The low-frequency band provide excellent depth penetration while the medium frequency excels at detail like bottom structure and tight-holding fish targets in mid-depth.

TThe included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH).

The B765LM transmits across the following bandwidths:

Low frequency 40 to 75 kHz, Medium frequency 80 to 130 kHz

* NOTE: The low-frequency band operates at 300 W. The medium-frequency band operates at 600 W.

Ferrite 750 mm
HRA-F-052x17-AA-0750-B-B
SKU: TBAA075001
Stock: 1
Width: 52 mm
Height: 17 mm
Water-resistant: no
Magnetic rails are used for straight product flows or flows with side in-feed or discharge.The most suitable magnetic rail version depends on the position in the conveyor system.Various functions are possible. Magnetic rails are also available in a waterproof version.

Infeed or discharge
Constant or dissipating magnetic force
Steel or stainless steel enclosure
With neodymium or ferrite magnets

Type AA

AA: straight-ahead version

For straight product flows with constant magnetic strength.
Suitable for installation between other magnetic rails.


Type AB/AC

AB and AC: dissipating version

With dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.
The dissipating magnetic field guarantees uniform, trouble-free transition.

Type AB for installation at the end of the magnetic conveyor
Type AC for installation at the beginning


Type BA/BB

BA and BB: tapered version

With tapered design for optimal transition to a magnet roller.

Type BA for installation in front of a magnet roller
Type BB for installation behind a magnet roller


Type BC/BD

BC and BD: tapered and dissipating version

With tapered shape and dissipating magnetic field for transition from magnetic to non-magnetic transport and vice versa.

Type BC for installation in front of a magnet roller
Type BD for installation behind a magnet roller

FLEXIBLE LEADS Climatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 31,5 Homologation VDE | IMQ Dimension D x H (mm) 40 x 94 Pcs x bag 50

Fast-on doppio / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

EC probes for electronic control units General features
Case in thermoplastic material.
Linearized NTC thermistor heat-sensitive element.
Bipolar terminal board.
G1/4” cable gland

Precision spur gear made of steel 16MnCr5 module 1 50 teeth bore 20mm hardened and ground outside diameter 52mm
Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined.

Article ID: 22485020

Carriage for miniature profile rail guide rail width 12mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901129

1 1-2 inch, 130 C

Service unit 2-part »FUTURA-mini«, Metal container, Standard pressure gauge, Size 0, G 1/4, Control range 0.1-4 bar, Fully-auto.
Two-piece service units with excellent flow rates in modern design.
Diaphragm pressure regulator with secondary ventilation.

Tempered coupling DN 9, Taps 13 mm, Blocking valve, Brass, Hose sleeve straight, Operating pressure max. 15 bar
Compatible with HASCO Z 8 system.

For temperature control applications involving hot or cold water or heat transfer oil.
Optionally with free passage, one or both sides sealing.
Female-threaded couplings and plugs with female-threaded PTFE seal.

Plastic pipe, LLDPE, »speedfit«, black, Operating temperature -20 °C to 65 °C, PN at 20 °C max. 15 bar, Hose Ø 6x4, Length 100 m
Plastic pipe made of LLDPE/LDPE with approval according to DVGW work sheet W270, KTW, NSF and WRAS.
LLDPE/LDPE pipes are suitable for potable water uses (cold water) with a maximum chlorine content of 4 parts per million (ppm).
Warm water above 20 °C and / or pressurising above the given maximum reduces the lifetime of this material. Also, placement in direct sunlight should be avoided.

Compact cyl.ISO 21287, single-acting, male piston rod,retr.,magnet,PistonØ16,Stroke10,M5, Work.press.max.10bar,Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Push-in T-fitting »Blue Series«, rotating, R 1/2 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Angled screw-on fitting, G 1/4, for hose 10/8 mm, AF 13, Working pressure max. 18 bar, nickel-plated brass

Standard pressure gauge, Double scale, Connection, rear, centr., G 1/8, Goods class 1.6, Measurement range 0-2.5 bar/36 psi, Ø 40
Bourdon-tube pressure gauge in standard design.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Replacement seal made of NBR, for Kamlok couplings made of aluminium, for coupling DN 40 (1 1/2")

1-ear hose clamp, Steel bright galvanised (W1), Clamping range 12.0 - 14.0 mm, Belt width 6.0 mm

Compact connecting set for the assembly of two individual devices, for »variobloc«, Size 1, G 1/4

Quick-connect coupling I.D. 7.2, bright brass, Sleeve I.D. 10, Operating pressure 0 - 35 bar, Med./ambient temp. -20 °C to 100 °C
Universal, one-hand quick disconnect couplings, one side sealing, suitable for a wide range of tasks and applications!
The closed sleeve protects the coupling from dirt.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

These quick disconnect couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, workshops, automotive.

Angled screw-on fitting »value line«, G 1/4, for hose 10/8 mm, AF 13, Operating pressure max. 18 bar, nickel-plated brass
Union elbows
Nickel-plated brass, »value line« Series

Spur gear made of polyacetal resin die-cast with hub module 0.5 14 teeth tooth width 3mm outside diameter 8mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28101400

1000 Series Twin Circuit
Diaphragm Operated
Static Pressure
Ranges 9 to 400 bar

Multiport rotary joints

Frequency:50 Hz
Speed:2860 1/min
Shaft Output:616 W
Volume Flow:1543 m³/h
Pressure:Δp s750 Pa
Pressure:Δp t1031 Pa
Density:43862 kg/m³
Sound Pressure:82 dB(A