Glycerine pressure gauge, front ring, Connection, rear, eccentric, G 1/2, Goods class 1.0, Measurement range 0 - 100 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with panel-mounting bezel
made of chrome-plated and polished steel.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Supply strip for the way valves, Mounting bracket set, Height 120 mm, for valves connection G 1/4
Quick and easy assembly system for side-by-side mounting of the above control valve types. Requires one set of mounting brackets and a feed block.

Screw-in connector made of brass, »speedfit« series, 1 BSPT, for pipe exterior Ø 28 mm

T screw on distributor, G 3/8, AF 27, Brass

T-piece 133, IT/ET/IT, Rp 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Filter element 40 µm, sintered bronze, for filter regulator and filter »Standard«, Size 2, G 3/8

Straight push-in fitting »click-clock«, R 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Rubber buffer GH ø 30mm height 30mm with through hole 13,5mm
Material: Natural rubber hardness 55º Shore A.

Simple, reasonably priced standard components used for elastic mounting.

The grade of rubber used has perfect physical
properties.

Article ID: 68573030

Product inlet size : 800x200 mm
SETK-084-SD-B-30S2-NA-FZB-B-B
SKU: SRTK080044
Stock *: 0
Max. capacity: 120 m³/h
Product outlet size: 930x250 mm
Fe-parts outlet size: 930x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Bevel gear made of steel module 6 15 teeth i=3:1
Material: up to module 2: 11SMnPb30. From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Article ID: 36737600

Rod end GS DIN 12240-4 series K internal thread M30x2 right == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63203000

Microfilter »FUTURA«, PC container and protective cage, 0.01 µm, Size 1, G 1/4, 1.5-16 bar, Temp. -10 °C to 50 °C, Semi-automatic
Micro-filters in modern design for compliance with strict compressed air purity requirements.
Micro-filters are used to separate solid oil, water and solid impurities as small as 0.01 µm from compressed air and gases.

Glycerine pressure gauge, front ring, Connection, rear, eccentric, G 1/2, Goods class 1.0, Measurement range 0 - 250 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with panel-mounting bezel
made of chrome-plated and polished steel.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Adjustable straight fitting, cone seal, 360° swivel range, female nut M36x2.0 i., Pipe ext. Ø 25, PN max.400 bar, galvanised steel

Aluminium pipe cutter incl. deburrer, »speedfit« series, for pipe exterior Ø 4 - 30 mm

Screw-in hose connector, G 3/4 o., for hose I.D. 25, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

T-piece 130, IT/IT/IT, Rp 1, T-branch reducing Rp 3/4, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galva.
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Fitting elbow 98, conical sealing, IT/ET, Rp 1, R 1, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Screw-in fitting for PVC pneumatic hose 6x8.2, Aluminium/plastic, Temperature -10 °C to 70 °C, PN -0,95 - 15 bar, G 1/4

Chain connecting link type 11 / E for roller chain similar to 08 B-1 NP pitch 1/2x5/16" nickel-plated packing unit 5 pieces
Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces.
Article ID: 10566003

Product inlet size : 1000x200 mm
SETK-104-SD-B-30S2-NA-FZB-B-B
SKU: SRTK100044
Stock *: 0
Max. capacity: 150 m³/h
Product outlet size: 1130x250 mm
Fe-parts outlet size: 1130x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Rod end GS DIN 12240-4 series K internal thread M30x2 left == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63213000

Filter »FUTURA« with PC container and protective cage, 5 µm, Size 1, G 3/8, 1.5 - 16 bar, Temp. -10 °C to 50 °C, Fully-automatic
Filters with excellent flow rates in modern design.

Glycerine pressure gauge, front ring, Connection, rear, eccentric, G 1/2, Goods class 1.0, Measurement range 0 - 600 bar, Ø 100
Bourdon-tube pressure gauge in standard design, with panel-mounting bezel
made of chrome-plated and polished steel.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Male hinge model with bushes, ISO 15552, ISO 21287, Ø40, with 4 screws
Male hinge model

Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 5x3, PN at 20 °C max. 20 bar, silver, Roll of 25 m
PA 12 is resistant to corrosion even at temperatures as low as -40 °C.
It has a low water absorptive capacity and is therefore dimensionally stable if the ambient humidity varies.
PA 12 resists greases, oil, fuels, hydraulic fluids, alkalis and salt solutions.
Sufficient UV resistance can only be guaranteed if the material is pigmented black!
Suitable for use with push-in fittings. Suitable for vacuum up to 12x9 mm.

Main applications:
- Compressed air lines (low-pressure range) in industry and manual trades.
- Hydraulic lines (miniature hydraulics) in instrumentation and control.
- Lines for liquid and free-flowing substances.
- Pneumatic braking systems in motor vehicles and trailers (DIN 73378:1996-02 and DIN 74324-1:1996-02).
- Fuel and lubricant supply systems.
- Vacuum lines

Protection sleeve for swing safety couplings »R-SC« DN 7.2 and DN 8, Vinyl

T-piece 130, IT/IT/IT, Rp 1, T-branch reducing Rp 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galva.
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Fitting 341, conical sealing, IT/ET, Rp/R 1 1/4, Operating temp. -20°C to 300 °C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Straight push-in fitting »Blue Series«, round, R 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Spur gear made of polyacetal resin die-cast with hub module 0.5 60 teeth tooth width 3mm outside diameter 31mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28106000

Splined hub DIN 14 KN 42X48 length 70mm diameter 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64899311

Product inlet size : 1000x250 mm
SETK-105-SD-B-30S2-NA-FZB-B-B
SKU: SRTK100054
Stock *: 0
Max. capacity: 180 m³/h
Product outlet size: 1140x275 mm
Fe-parts outlet size: 1140x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

timing bar AT3 60 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16396000

Microfilter »FUTURA«, PC container and protective cage, 0.01 µm, Size 1, G 3/8, 1.5-16 bar, Temp. -10 °C to 50 °C, Semi-automatic
Micro-filters in modern design for compliance with strict compressed air purity requirements.
Micro-filters are used to separate solid oil, water and solid impurities as small as 0.01 µm from compressed air and gases.

Compact cyl.ISO 21287, double-acting, female piston rod,magnet,PistonØ125, Stroke70,G1/4, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Screw-in hose connector, R 3/8 o., for hose I.D. 9, Stainless steel, Max. working pressure 60 bar, Max. operating temp. 150 °C

Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 5x3, PN at 20 °C max. 20 bar, green, Roll of 25 m
PA 12 is resistant to corrosion even at temperatures as low as -40 °C.
It has a low water absorptive capacity and is therefore dimensionally stable if the ambient humidity varies.
PA 12 resists greases, oil, fuels, hydraulic fluids, alkalis and salt solutions.
Sufficient UV resistance can only be guaranteed if the material is pigmented black!
Suitable for use with push-in fittings. Suitable for vacuum up to 12x9 mm.

Main applications:
- Compressed air lines (low-pressure range) in industry and manual trades.
- Hydraulic lines (miniature hydraulics) in instrumentation and control.
- Lines for liquid and free-flowing substances.
- Pneumatic braking systems in motor vehicles and trailers (DIN 73378:1996-02 and DIN 74324-1:1996-02).
- Fuel and lubricant supply systems.
- Vacuum lines

Protection sleeve for swing safety couplings »R-SC« DN 11, Vinyl

Screw-in hose connector, G 1/2 o., for hose I.D. 9, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Blocking valve »Blue Series«, Plug connector, G 1/8 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Bushing 240, reducing, IT/IT, Rp 3/8, Rp 1/4, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

One-piece clamp coupling MAS both sides bore 35mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70
Material: Stainless steel 1.4305.

Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The
screws DIN 912 - A2-70 used in all couplings are covered with a layer of
nylon. Thus the bolts do not loosen with vibrations Bore tolerance:
+0,051 mm. The torques in the table are maximum values which can only be
achieved with perfect mounting and dimensional accuracy of the shaft.

Article ID: 60099635

Spur gear made of polyacetal resin die-cast with hub module 0.7 38 teeth tooth width 6mm outside diameter 28mm
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.

Article ID: 28203800

Product inlet size : 1200x250 mm
SETK-125-SD-B-30S2-NA-FZB-B-B
SKU: SRTK120054
Stock *: 0
Max. capacity: 215 m³/h
Product outlet size: 1330x275 mm
Fe-parts outlet size: 1330x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Hexagon nut DIN 6330 steel strength 10 thread M10 right hand
Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement.

Article ID: 65321000

Slide set DZ 0204 slide length 559mm zinc plated
Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.

Article ID: 64900222

Mist oiler »variobloc« with metal container incl. viewing tube, Size 1, G 1/4, Input pressure max. 20 bar, Medium temp. max. 50°C
Proportional lubricators, oil can be filled under pressure.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Compact cyl.ISO 21287, double-acting, male piston rod magnet, PistonØ125, Stroke70, G1/4, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Double threaded nipple R 1 1/4 o., R 1 1/2 o., AF 50 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

3-way ball valve, nickel-plated brass, Connection bottom, T-hole, Rp 1/2, DN 15, Operating temp. -15 °C to 120 °C, PN max. 25 bar
3-way ball valve with full throughput, integrated ISO flange plate (ISO 5211) and double-sided sealed ball.
Pressurisation is only possible via the lower connection.

Bellows suction cup, Round 1.5 folds, Silicone material, »FGA«, ø16 mm, suitable connection nipple IT G 1/8, ET M5 / G 1/8
Robust and hard-wearing suction pad with a single sealing lip.

Used wherever objects (parts, packing materials, etc.) need to be lifted, transported, turned over or handled in some other manner. It is also ideal when it is necessary to compensate varying workpiece heights or uneven surfaces or to handle easily damaged parts. It acts as the connecting element between the vacuum generator and the workpiece.

Properties:
Very stiff top foldSoft, tapered sealing lipsSupports on the bottomHigh suction forceOptimum damping effectVery good adaptation to curved workpiece surfaces or materials with?uneven surfaces

Applications:
Handling workpieces with extremely uneven surfaces (e.g. pipes)Handling easily damaged parts

Screw-on connection POM, G 3/4, for hose exterior Ø 8 mm, Working pressure max. 16 bar
Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications.
All our push-in fittings made of POM have the following approvals:
drinking water DVGW, KTW, FDA and NSF.
Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.

Blocking valve »Blue Series«, Plug connector, R 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Worm thread - hose clamp »blow line«, Stainless steel (W 5) 1.4401, Belt width 9.0 mm, Clamping range 60.0 - 80.0 mm

Set-screw coupling TR bore 35mm with keyway stainless steel 1.4305
Material: Stainless steel 1.4305

These couplings do not allow any shaft displacement in axial or radial
direction. They should therefore only be used with perfectly alligned
shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1,
Tolerance P9. The torques in the table are maximum values for couplings
with keyway. The calculations based on feather-key connection.

Article ID: 60099235

Product inlet size : 1400x250 mm
SETK-145-SD-B-30S2-NA-FZB-B-B
SKU: SRTK140054
Stock *: 0
Max. capacity: 250 m³/h
Product outlet size: 1530x275 mm
Fe-parts outlet size: 1530x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Slide set DS 0305 slide length 457mm stainless steel 1.4301
Material: Stainless steel 1.4301. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings.

Article ID: 64922418

Mist oiler »variobloc« with metal container incl. viewing tube, Size 1, G 3/8, Input pressure max. 20 bar, Medium temp. max. 50°C
Proportional lubricators, oil can be filled under pressure.
Approved series in modern industrial design, with the following key benefits:
- Simple handling
- Convenient modular assembly thanks to innovative fasteners
- Excellent flow values

Quick-connect coupling I.D. 7.8, Stainless steel 1.4305, Sleeve I.D. 8, Operating pressure 0 - 35 bar, Temp. -15 °C to 200 °C
One-hand quick disconnect couplings, one side sealing, made of stainless steel 1.4305.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

These quick disconnect couplings are not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Areas of application: Pneumatic system, machine and plant engineering, manufacturing industry, medical technology, chemical / pharmaceutical industry, food technology, aerospace, mining, offshore.