1-ear hose clamp with insert ring, Steel bright galvanised (W1), Clamping range 7.5 - 8.5 mm, Belt width 7.8 mm
An absolutely safe all around setting is ensured by the pre-mounted insert ring. Suitably for use with soft and sensitive hose material.

Reducing nipple, Short design, G 1 ET, G 3/4 IT, AF 38, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Straight push-in fitting »universal short«, 1/8, hose-Ø 6, taper seat, Working pressure -0,99 to 20 bar, nickel-plated brass
The quick-connect fittings of the »universal short« series are true to their name and are used for the quick and simple connection of hoses. The conical sealing threads off a high degree of flexibility, as it is compatible with both conical and cylindrical threads. Thus the quick-connect fitting can be combined with a wide variety of thread types (BSPP, BSPT, NPT, NPTF, PT, PF) of standards ISO 7.1 and ISO 228. Shorter assembly ties result from the reduced thread length. The smaller hole spacing, resulting from the reduction of the width across flats, enables installation in very tight spaces. This saves time and space.

The complete sealing is also guaranteed on uneven, for example inclined, concave or convex surfaces, and with differing radii and chamfers. The special geometry of the seal enables vacuum applications.

Suitable plastic pipes: PA11, PA12, polyethylene, polyurethane (for polyurethane a hardness of 98 shore is recommended), PTFE.

Areas of application: Pneumatic automation, automotive industry, textile and packaging industry, compressed air circuits, vacuum applications.

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 9.0 - 11.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Captive nipple I.D. 5, Bright brass, G 1/8 IT, brown, Operating pressure 0 - 35 bar, Medium / ambient temp. -20 °C to 100 °C

The six-stage controller was developed for the control of compressor groups of up to 6 machines, and/or the control of compressors with bypass-valves (max. 3 machines). The basic gas characteristics are part of the fixed program data - therefore, it is possible to execute a pressure control (4...20mA) and to show the temperature values at the same time. The compressor running times can be optimised by help of the sequential or time-conditioned load replacement. The controller that can be parametered in various ways has an alarm contact and a hour meter. 900205.004

Retaining ring DIN 472 8mm
Material: Feather steel, phosphated, oiled. Internal rings for
axial fixing a machine part inside a bore.

Article ID: 61760800

Pressure Ranges 0 to 400 mbar
Accuracy +/-1.6%
100mm Gauge Size
3 Hole Fixing

Rotating joint with aluminium- or brassdesign for water
internal term: PRO One way: yes 2 way with a standing inner tube: No 2 way with rotating inner tube: No

Frequency:50 Hz
Speed:2750 1/min
Shaft Output:15 W
Volume Flow:76 m³/h
Pressure:250 Pa
Pressure:302 Pa
Density:1.2 kg/m³
Sound Pressure:59 dB(A)

For Connecting A Hose Weight:0,01

The legendary B260‘s 1 kW performance is now available for fast sport-fishing boats—no fairing required! Airmar has taken the proven B260 and split it apart into a pair of low-profile transducers. One transducer handles 50 kHz while the other operates at 200 kHz. And the ceramic element in each unit has been tilted to offset the deadrise angle of your boat’s hull.

Called the SS264N, these transducers are perfect for fast center-console and tailored sport-fishing boats, or any vessel that cannot have a thru-hull with a high-performance fairing. The narrow-beam, broadband, 200 kHz transducer will give excellent resolution and crisp image detail needed for bottom fishing. This transducer’s low ringing is perfect for finding fish holding tight to the bottom and other structure. The seven-element, 50 kHz transducer is the same found in the SS264W and is best for deep-water sounding down to 914 m (3,000').

The SS264N is available in three Tilted Element™ models:

Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise

Neodymium (NdFeB) 140 N
PM-TB-N-SG-D20x6x13xM4
SKU: GM17605
Stock: 0
Diameter (D): 20 mm
Height (H): 6 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and with threaded bush for easy mounting. Due to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Pot magnets with threaded bush are available in neodymium, ferrite and samarium cobalt.

Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 3,5 Homologation VDE | IMQ Dimension D x H (mm) 25 x 57

Twin cable / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

25 – 27 series ring and control knob General features
Ring and control knob for C02 thermostats series

PARALLEL NIPPLE LENGTH 200 MM - STAINLESS STEEL 316

Information

Coil fully " fully threaded A (c) e - Stainless steel 316> DiamA " very available: from DN6 to DN50 - Gas thread> Nominal pressure of the coil fully " fully threaded A (c) e: - 20 bar At 20AdegC- 16 bar A 100AdegC> Standard ISO 228-1

Slip shaft with joints PW bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 250mm max. length 340mm steel
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63183200N

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

1 inch, 130 C internal term: RSRO One way: no 2 way with a standing inner tube: No 2 way with rotating inner tube: Yes

Pressure gauge, robust design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range 0 - 60 bar, Ø 160
Robust bourdon-tube pressure gauge.

Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Adjustable angle fitting, Sealing cone, 360° rotating, Nut M26x1.5 i., Pipe exterior Ø 18 mm, PN max. 315 bar, galvanised steel

Seal set, Complete set for pressure amplifier and controller, Ø 40 mm

Swing safety coupling I.D. 6, ISO 6150 C, Steel, NPT 1/2 IT, Operating pressure max. 25 bar, Temp. -20 °C to 100 °C
Swing safety coupling with free passage.
The plug-in nipple is inserted into the coupling body and rotated by an approx. 90° motion to make the connection. As soon as the "red ring" clicks into the intended slot then a secure connection has been made. To release the connection again, the "red ring" must be pulled out and the plug-in nipple is swivelled to the stopper into the starting position. Venting is done during uncoupling through a vent hole on the back side of the coupling.

This coupling meets ISO standard DIN EN ISO 4414, EN 983.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, workshops, automotive, mining.

Flange fastening, »FA« type for compact cylinder »ACP«, Piston Ø 20
Flange model, »FA« type

Bracket 120, 45°, Rp 3/4 IT, Rp 3/4 IT, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Screwdriver »blow line«, for mounting worm thread hose clamps

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 37.0 - 40.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Protection sleeve for swing safety couplings »R-SC« DN 5.5 and DN 6, Vinyl

Angled fitting, Pipe exterior Ø 12 mm, PN max. 630 bar, A/F1 24, A/F2 17, galvanised steel
Union elbow, heavy type

Push-in L-fitting »Blue Series«, rotating, M5 i./o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Hexagonal counter nut, G 1/4, AF 17, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C

Male elbow, M8x1.0 tapered o., Pipe exterior Ø 4 mm, PN max. 100 bar, a/f1 10, a/f2 9, galvanised steel

Push-in T-fitting »Blue Series«, rotating, G 1/2 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Angled screw-in fitting »value line«, rotating, G 1/4 o., for hose 8/6 mm, Operating pressure max. 18 bar, nickel-plated brass
Union elbows
Nickel-plated brass, »value line« Series

1-ear hose clamp with insert ring, Steel bright galvanised (W1), Clamping range 10.0 - 11.5 mm, Belt width 7.8 mm
An absolutely safe all around setting is ensured by the pre-mounted insert ring. Suitably for use with soft and sensitive hose material.

2-ear hose clamp, Steel bright galvanised (W1), Clamping range 17.0 - 20.0 mm, Belt width 7.5 mm
Quick and safe assembly: the two parts are simply pressed together.

Push-in L-fitting »Blue Series«, rotating, G 1/4 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Hinge pin clamp, Chrome steel 1.4016 (W2), Clamping range 73.0 - 79.0 mm, Belt width 25.0 mm, rec. tightening torque 20.0 Nm
For use with our industrial water, rubber, suction and discharge hoses.

2-ear hose clamp »blow line«, galvanised steel, Chrome III coated, Clamping range 5.0 - 7.0 mm
Quick and safe assembly: the two parts are simply pressed together.

Push-in T-fitting »click-clock«, rotating, R 1/4 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

The controller ST73-31.10 was developed for simple thermostatic applications. The round housing allows applications at locations in which formerly only mechanical controls were in use. The unit is supplied with 230V AC. The installed relay has a maximum electric Ohm load of 16A. Inductive loads can be switched up to 2,2A. 900206.005

Retaining ring DIN 472 10mm
Material: Feather steel, phosphated, oiled. Internal rings for
axial fixing a machine part inside a bore.

Article ID: 61761000

Timing belt pulley HTD 14M material steel 32 teeth for belt width 55mm for taper bush 2517
Material: Up to a Teeth Number of 56 phosphated steel, from a
Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install,
for use with taper-bushings. Taper-bushings are available for varios
shaft diameters and have to be ordered seperately.

In this youtube video we show the mounting and demounting of taper
bushes: Video clip (3.5
Minutes)
Article ID: 17677216

Pressure Ranges 0 to 400 mbar
Accuracy +/-1.6%
160mm Gauge Size
Clamp Fixing

internal term: 3-4 inch, 90 C 10,0 bar water One way: no 2 way with a standing inner tube :no 2 way with a standing inner tube: yes

Combined input / output line with ISO 228-thread
Rotating joint with stainless steeldesign for water
internal term: PRE One way: yes 2 way with a standing inner tube: No 2 way with rotating inner tube: No

Frequency:50 Hz
Speed:1360 1/min
Shaft Output:5 W
Volume Flow:104 m³/h
Pressure:78 Pa
Pressure:97 Pa
Density:1.2 kg/m³
Sound Pressure:53 dB(A)

Suitable For Lv 250 And Gv 250 Weight:0,01

1 kW

Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology has been taken to a higher power. This 1 kW, flush-mount transducer is perfect for fast, trailered, tournament and sport-fishing vessels that cannot accommodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (1/4") outside your hull, so it can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing, providing the perfect vertical beam with maximum energy on what is directly below the boat.

Available in three Tilted Element models:

Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise

Neodymium (NdFeB) 160 N
PM-HS-N-SG-D25x7xd4.5/9
SKU: GM17427
Stock: 25
Holding force: 160 N
Height: 7 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with countersunk hole are available in various sizes and types such as neodymium, ferrite and AlNiCo.

Available in various sizes
Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Tension on the magnet

For pot magnets with a cylinder hole, the magnet has a countersunk hole. Tighten with caution. Excessive tightening causes magnetic splinters or cracks in the magnet.

Twin cableClimatic category -25 °C / +85 °C
Protection degree IP00
Loss Factor ≤ 5 x 10 ^-4 typical value
Test Voltage between terminals 1,75 Vn x 2 sec (min.)
Test Voltage between terminals and case 2 Vn x 2 sec (min.)
Rated Voltage 450 Vac
Rated Frequency 50 / 60 Hz
Capacitance Tolerance -/+ 5%
Operating class 400 V – B 10000 h (HPFNT)
450 V – C 3000 h (HPFPU)
Dielectric Self-healing MKP
Safety class S0
STANDARDS AND APPROVALS
Reference standards CEI EN 60252-1; VDE560-8
Homologation EN60252-1 (1.5 ÷ 45 µF)
EN60252-1 (1.5 ÷ 45 µF)
File E214047 (upon request) Cn
(µF) 4 Homologation VDE | IMQ Dimension D x H (mm) 25 x 57

Twin cable / Plane Base The MKA 450 capacitors are suitable for the heavy duty motor
applications.

Thermostatic valve series 158 General features
Available with chrome frame finish
Double micrometric adjustment
Operating temperature: -10° C to +110° C
Lockshield valve calibration by Allen key (6 mm)
ABS cap
Screw sealing by EPDM O Ring
Tailpiece sealing by O Ring
Threads according to UNI ISO 228
Brass body

PARALLEL NIPPLE LENGTH 200 MM - STAINLESS STEEL 316

Information

Coil fully " fully threaded A (c) e - Stainless steel 316> DiamA " very available: from DN6 to DN50 - Gas thread> Nominal pressure of the coil fully " fully threaded A (c) e: - 20 bar At 20AdegC- 16 bar A 100AdegC> Standard ISO 228-1

Slip shaft with joints PW both sides bore 18H7 telescoped length
270mm max. length 370mm steel outer diameter 37mm
Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63183700

Timing belt pulley HTD 14M material steel 30 teeth for belt width 85mm for taper bush 2517
Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 17677315

Rotating joint type RL-ND – new design with bellows system cartridge, solid grease ballbearings, for universal use

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel