S300-PR-1-G00-EX-beam sensor: Transmitter
Design: 28 x 85 x 70 mm
Operating voltage: 24-240 VAC / 24-60 VDC
Light: infrared, 880 nm
Range: 60 m
Connection: Cable Terminal chamber
Note: Versions with time function and optics space heating are available on request.
S300-PA-1-G00-EX-beam sensor: Transmitter
Operating voltage: 24-240 VAC / 24-60 VDC
Light: infrared, 880 nm
Range: 50 m
Connection: Cable Terminal chamber
Note: Versions with time function are available on request.
S62-PA-5-F01-PP-beam sensor: Receiver
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light: red light, 640 nm
Range: 0-25 m
Output: PNP
Connection: M12 connector, 4-pin
S62-PA-5-G00-XG-beam sensor: Transmitter
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light: red light, 640 nm
Range: 0-25 m
Connection: M12 connector, 4-pin
S8-PR-5-F01-PP-beam sensor: Receiver
Type: 14 x 42 x 25 mm
Operating voltage: 12-30 V DC
Light: red light, 660 nm
Range: 0-25 m
Setting: Trimmer
Switching frequency: 1000 Hz
Output: PNP
Connection: M8 connector, 4-pin
S8-PR-5-G00-XG-beam sensor: Transmitter
Type: 14 x 42 x 25 mm
Operating voltage: 12-30 V DC
Light: red light, 660 nm
Range: 0-25 m
Connection: M8 connector, 4-pin
S45-PR-5-G00-XE-beam sensor: Transmitter
Type: 34 x 20 x 12 mm
Operating voltage: 10-30 V DC
Light: red light, 632 nm
Range: 0-13 m
Connection: M8 connector, 4-pin
S100-PR-5-FG00-PK-way light barrier transmitter and receiver
Type: 32 x 20 x 12 mm
Operating voltage: 10-30 V DC
Output: PNP
Light / dark switching
Range: 12 m
Light: infrared, 860 nm
Connection: M8 connector, 4-pin
Note: Versions with cable and NPN output are available on request.
RDC14 CA
RDC14MF0,04CA160
DC Tachogenerators are used as speed monitoring devices, they convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
They are most often used when mounted on to the back of a DC Motor and supply the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 40V/1000RPM.
Part Number /0000048
0444N1B0.06EG
7mm Diameter Shaft and Flange Mounted.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444N1B006EG Tachogenerator 7mm Shaft Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /00000001
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.
RE 0444 RT 1B 0.05 CA
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1S006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000031
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1B006CA Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000026
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO 444 L1 B0.06CA Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000156
DC Tachogenerators are used as speed monitoring devices, they convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
They are most often used when mounted on to the back of a DC Motor and supply the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 40V/1000RPM.
Part Number /0000048
REO444US B C1 x20 CA IP54 Dx19 PC
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US
REO444 US S C1 100V 7x9 C
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US
REO444N1B0,06CA
Industrial Applications Lighter Duty, New Version of RE.0444N with Terminal Box
Also referred to as REO444NV, REO 444NV, RE0444NV, RE0 444NV
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1S006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000031
The REO444 range are no longer 'UL' or 'CSA' approved.
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1B006CA Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000026
The REO444 range are no longer 'UL' or 'CSA' approved.
REO444R1B 0.06 EG
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply. Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
IP54
Part Number /0000025
The REO444 range are no longer 'UL' or 'CSA' approved.