Neodymium (NdFeB) 70 N
PM-BA-N-BR-D13h6x20
SKU: GM17304
Stock: 18
Diameter: 13 mm
A: 6 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Neodymium (NdFeB) 150 N
PM-BA-NB-BR-D16h6x20-B
SKU: GM17305
Stock: 7
Diameter: 16 mm
A: 2 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Neodymium (NdFeB) 280 N
PM-BA-N-BR-D20h6x25
SKU: GM17306
Stock: 0
Diameter: 20 mm
A: 5 mm
Height: 25 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Neodymium (NdFeB) 450 N
PM-BA-N-BR-D25h6x35
SKU: GM17307
Stock: 0
Diameter: 25 mm
A: 7 mm
Height: 35 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Neodymium (NdFeB) 700 N
PM-BA-N-BR-D32h6x40
SKU: GM17308
Stock: 0
Diameter: 32 mm
A: 4.5 mm
Height: 40 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 8 N
PM-BA-S-BR-D6h6x20
SKU: GM17001
Stock: 10
Diameter: 6 mm
A: 10 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 22 N
PM-BA-S-BR-D8h6x20
SKU: GM17002
Stock: 37
Diameter: 8 mm
A: 10 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 40 N
PM-BA-S-BR-D10h6x20
SKU: GM17003
Stock: 17
Diameter: 10 mm
A: 8 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 60 N
PM-BA-S-BR-D13h6x20
SKU: GM17004
Stock: 1
Diameter: 13 mm
A: 6 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 125 N
PM-BA-S-BR-D16h6x20
SKU: GM17005
Stock: 0
Diameter: 16 mm
A: 2 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 230 N
PM-BA-S-BR-D20h6x25
SKU: GM17006
Stock: 0
Diameter: 20 mm
A: 5 mm
Height: 25 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 400 N
PM-BA-S-BR-D25h6x35
SKU: GM17007
Stock: 0
Diameter: 25 mm
A: 7 mm
Height: 35 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Samarium-Cobalt (SmCo) 600 N
PM-BA-S-BR-D32h6x40
SKU: GM17008
Stock: 0
Diameter: 32 mm
A: 4.5 mm
Height: 40 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

6 mm Steel
PM-TB-A-SS-D6x10
SKU: GM16001
Stock: 42
Holding force: 2 N
A: 2 mm
Height: 10 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

8 mm Steel
PM-TB-A-SS-D8x12
SKU: GM16002
Stock: 11
Holding force: 4 N
A: 3 mm
Height: 10 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

10 mm Steel
PM-TB-A-SS-D10x16
SKU: GM16003
Stock: 0
Holding force: 8.5 N
A: 6 mm
Height: 16 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

13 mm Steel
PM-TB-A-SS-D13x18
SKU: GM16004
Stock: 0
Holding force: 12 N
A: 6 mm
Height: 18 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

16 mm Steel
PM-TB-A-SS-D16x20
SKU: GM16005
Stock: 0
Holding force: 20 N
A: 6 mm
Height: 20 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

20 mm Steel
PM-TB-A-SS-D20x25
SKU: GM16006
Stock: 15
Holding force: 40 N
A: 5 mm
Height: 25 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

25 mm Steel
PM-TB-A-SS-D25x30
SKU: GM16007
Stock: 0
Holding force: 60 N
A: 7 mm
Height: 30 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

32 mm Steel
PM-TB-A-SS-D32x35
SKU: GM16008
Stock: 0
Holding force: 160 N
A: 4 mm
Height: 35 mm
Compact magnet systems with a steel shell with h6 fit tolerance. These pot magnets are suitable for gluing, pressing and shrinking. Thanks to the shell of these pot magnets, the magnetic field strength increases and they are more resistant to corrosion or chemicals. Pot magnets have a single attraction surface; this prevents the spread of the magnetic field.Pot magnets with h6 fit tolerance are available in various sizes and types such as neodymium, samarium cobalt and AlNiCo.

Deliverable from stock
Available in various qualities
Editing without losing magnetic power

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface has a protective coating to prevent corrosion.
 

Operating temperature

What temperature does magnet strength loss occur at?

Neodymium cylindrical and flat pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Loss of holding force

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into iron. Always maintain a certain distance between the brass shell of the pot magnet and the iron. Contact Goudsmit for specific recommendations.
 
Tooling the magnet without loss of tensile force:
The magnet strength remains the same when the magnet system is shortened down to a maximum value of A. See the specified value for the relevant item.

Size : Ø12 mm
GM14418
SKU: GM14418
Stock: 0
Holding force: 55 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø20 mm
PLAFONDMAGN.R20 STAAL MET HAAK
SKU: GM14420
Stock: 911
Holding force: 30 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø25 mm
PLAFONDMAGN.R25 STAAL MET HAAK
SKU: GM14421
Stock: 21
Holding force: 40 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø32 mm
PLAFONDMAGN.R32 STAAL MET HAAK
SKU: GM14422
Stock: 4038
Holding force: 80 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø36 mm
PLAFONDMAGN.R36 STAAL MET HAAK
SKU: GM14423
Stock: 1766
Holding force: 100 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø40 mm
PLAFONDMAGN.R40 STAAL MET HAAK
SKU: GM14424
Stock: 1240
Holding force: 110 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø47 mm
PLAFONDMAGN.R47 STAAL MET HAAK
SKU: GM14425
Stock: 2788
Holding force: 180 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø50 mm
PLAFONDMAGN.R50 STAAL MET HAAK
SKU: GM14426
Stock: 3007
Holding force: 200 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø43 mm
DECOMAGNEET R43 PVC STAAL HAAK
SKU: GM14410
Stock: 0
Holding force: 120 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : 34 x 29 mm
DECOMAGNEET RH 34X29 PVC WIT
SKU: GM14437
Stock: 4
Holding force: 80 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : 42 x 14 mm
DECOMAGNEET RH 42x14 PVC WIT
SKU: GM14438
Stock: 0
Holding force: 55 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : 57 x 15 mm
DECOMAGNEET RH 57x15 PVC WIT
SKU: GM14439
Stock: 0
Holding force: 115 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : 42 x 14 mm
GM14443
SKU: GM14443
Stock: 0
Holding force: 55 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : 53 x 27.5 mm
LAMELLENMAGNEET 53X27.5X12.5MM
SKU: GM14459
Stock: 415
Holding force: 150 N
Compact magnet systems with a hook and a shell of steel or plastic. With these strong magnetic hooks, you can attach all sorts of products to any steel surface. Check out our range of magnetic hooks and ceiling magnets in steel and plastic.

Attach without drilling or screwing
For presentation, display or hanging
Suitable for advertising and promotion
Steel and plastic version

Composition and construction of magnetic hooks

Good magnetic properties, affordably priced

Magnetic hooks have a plastic or steel shell with hook. The shell provides magnetic shielding. With these hook magnets, you can easily hang up to 20 kg. The raw material of the magnet - ferrite - is affordably priced compared with other types of magnet. Magnetic hooks are great value.
The hook of this pot magnet is screwed in the threaded bush or is part of the overall enclosure.

Operating temperature

When does loss of magnetic strength occur?

Ferrite magnetic hooks have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion and application

Magnetic hooks do not corrode and are suitable for outdoor use.
The magnetic force is greater than shear force. These magnetic hooks are useful for steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.

Size : Ø43 mm
DECOMAGNEET R43 PVC OPHANGOOG
SKU: GM14411
Stock: 0
Holding force: 120 N
Compact magnet systems with a plastic shell and an eyelet. With these strong eyelet magnets, you can easily attach all sorts of products to a steel surface. The white plastic shell makes this magnet with eyelet less conspicuous and therefore excellent for application in shops and shop windows.

Available in various sizes
For presentation, display or hanging
Easy to install
Deliverable from stock

Construction of pot eyelet magnets

Good magnetic properties, affordably priced

These pot magnets have a plastic shell with an eyelet. The shell provides protection for the magnet. You can easily hang advertising messages, products or other items from the eyelet. The raw material of these magnets, ferrite, is affordably priced compared with other types of magnet. These eyelet magnets are good value for money.
Ferrite pot magnets do not corrode and are suitable for outdoor use.

Operating temperature

When does loss of magnetic strength occur?

Eyelet magnets have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic force and shear force

The magnetic force is greater than shear force. These eyelet magnets are useful for on steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.
These eyelet magnets are ideal for presenting promotional materials in department stores, shops or showrooms. They are reusable on any steel or iron surface.

Size : 19 x 14 mm
DECOMAGNEET RH 19X14 PVC WIT
SKU: GM14436
Stock: 141
Holding force: 20 N
Compact magnet systems with a plastic shell and an eyelet. With these strong eyelet magnets, you can easily attach all sorts of products to a steel surface. The white plastic shell makes this magnet with eyelet less conspicuous and therefore excellent for application in shops and shop windows.

Available in various sizes
For presentation, display or hanging
Easy to install
Deliverable from stock

Construction of pot eyelet magnets

Good magnetic properties, affordably priced

These pot magnets have a plastic shell with an eyelet. The shell provides protection for the magnet. You can easily hang advertising messages, products or other items from the eyelet. The raw material of these magnets, ferrite, is affordably priced compared with other types of magnet. These eyelet magnets are good value for money.
Ferrite pot magnets do not corrode and are suitable for outdoor use.

Operating temperature

When does loss of magnetic strength occur?

Eyelet magnets have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic force and shear force

The magnetic force is greater than shear force. These eyelet magnets are useful for on steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.
These eyelet magnets are ideal for presenting promotional materials in department stores, shops or showrooms. They are reusable on any steel or iron surface.

Size : 58 x 58 mm
LAMELLENMAGN 58X58X15 OOG WIT
SKU: GM14462
Stock: 65
Holding force: 300 N
Compact magnet systems with a plastic shell and an eyelet. With these strong eyelet magnets, you can easily attach all sorts of products to a steel surface. The white plastic shell makes this magnet with eyelet less conspicuous and therefore excellent for application in shops and shop windows.

Available in various sizes
For presentation, display or hanging
Easy to install
Deliverable from stock

Construction of pot eyelet magnets

Good magnetic properties, affordably priced

These pot magnets have a plastic shell with an eyelet. The shell provides protection for the magnet. You can easily hang advertising messages, products or other items from the eyelet. The raw material of these magnets, ferrite, is affordably priced compared with other types of magnet. These eyelet magnets are good value for money.
Ferrite pot magnets do not corrode and are suitable for outdoor use.

Operating temperature

When does loss of magnetic strength occur?

Eyelet magnets have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic force and shear force

The magnetic force is greater than shear force. These eyelet magnets are useful for on steel slats in a suspended ceiling or other steel surfaces. They are less powerful with vertical use, for example on a steel cabinet door, partition wall or whiteboard. Here, we recommend magnets with a rubber coating or shell.
These eyelet magnets are ideal for presenting promotional materials in department stores, shops or showrooms. They are reusable on any steel or iron surface.

Neodymium (NdFeB) 550 N
GM17530
SKU: GM17530
Stock: 0
Size: Ø88 mm
Height (L): 23.5 mm
Shear force: 125 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 250 N
GM1751901
SKU: GM1751901
Stock: 0
Size: Ø66 mm
Height (L): 23.5 mm
Shear force: 75 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 250 N
PM-RTE-N-RB-D66x8.5xM8x23.5
SKU: GM17519
Stock: 10
Size: Ø66 mm
Height (L): 23.5 mm
Shear force: 85 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
GM17515
SKU: GM17515
Stock: 0
Size: Ø43 mm
Height (L): 12 mm
Shear force: 30 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 58 N
NDFE POT ZW RUB ø22X6 M4 DRein
SKU: GM17480
Stock: 9
Size: Ø22 mm
Height (L): 12.5 mm
Shear force: 15 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 13 N
GM17499
SKU: GM17499
Stock: 0
Size: Ø12 mm
Height (L): 14.8 mm
Shear force: 5 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 550 N
NDFEB POTM ø 88X8.5 DRB - CHIN
SKU: GM17510
Stock: 22
Size: Ø88 mm
Height (L): 17 mm
Shear force: 125 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 180 N
NDFEB POT 66x8.5 DR BUS WIT RB
SKU: GM1750701
Stock: 0
Size: Ø66 mm
Height (L): 15 mm
Shear force: 75 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
PM-RTB-N-RB-D43x6xM4
SKU: GM17505
Stock: 100
Size: Ø43 mm
Height (L): 10.5 mm
Shear force: 30 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 58 N
NDFE POT ZW RUB ø22X6 M4 DRBUS
SKU: GM17481
Stock: 6
Size: Ø22 mm
Height (L): 11.5 mm
Shear force: 15 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 250 N
NDFE POT 66X8.5 GAT ZWART RUBB
SKU: GM17562
Stock: 6
Size: Ø66 mm
Height (H): 8.5 mm
Shear force: 85 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 175 N
NDFE POT ø 57X7.6 ZW RU GATø 8
SKU: GM17557
Stock: 60
Size: Ø57 mm
Height (H): 7.6 mm
Shear force: 55 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 89 N
PM-RHC-N-RB-D31.5xd6/8.8
SKU: GM175305
Stock: 7317
Size: Ø31 mm
Height (H): 6 mm
Shear force: 19 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 290 N
GM17471
SKU: GM17471
Stock: 0
Size: 70 x 50 mm
Attachment: M5
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 290 N
NDFE POT 70X50X13 2X DR.GAT M5
SKU: GM17472
Stock: 0
Size: 70 x 50 mm
Attachment: M5
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 250 N
POTMAGNEET NDFEB 66X8.5 M6
SKU: GM1756301
Stock: 0
Size: Ø66 mm
Height (H): 8.5 mm
Attachment: M6
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 210 N
NDFE POT 66X8.5 DR GAT ZWART R
SKU: GM17563
Stock: 0
Height (H): 8.5 mm
Attachment: M6
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
GM17461
SKU: GM17461
Stock: 0
Size: 43 x 31 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
NDFEBPOT 43x31MM 1xDR.GAT
SKU: GM17460
Stock: 2
Size: 43 x 31 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
NDFE POTø 43X6 DRGAT M4 RUBBER
SKU: GM17500
Stock: 26
Size: Ø43 mm
Height (H): 6 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 38 N
PM D22x6xM4
SKU: GM17482
Stock: 11
Size: Ø22 mm
Height (H): 6 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Ferrite 85 N
ANTI SLIP 75X50X11 RUBBER+ ZK
SKU: GM14123
Stock: 304
Size: 75 x 50 mm
Attachment: Self-adhesive
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.