Pallet dimension : 1200 x 800 mm
HPA-N-M-AL-1250-0850-B
SKU: TPMA120856
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Pallet dimension : 1200 x 1000 mm
HPA-N-M-AL-1250-1050-B
SKU: TPMA121056
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Pallet dimension : 1420 x 1120 mm
HPA-N-M-AL-1470-1170-B
SKU: TPMA141156
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Pallet dimension : 1200 x 800 mm
HPA-N-F-AL-1250-0850-B
SKU: TPFA120856
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Pallet dimension : 1200 x 1000 mm
HPA-N-F-AL-1250-1050-B
SKU: TPFA121056
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Pallet dimension : 1420 x 1120 mm
HPA-N-F-AL-1470-1170-B
SKU: TPFA141156
The lightweight magnetic palletizers have an aluminium housing. This makes them suitable for palletizing or depalletizing on a robot arm.For picking up large filled tins, aerosols, cans and glass jars with steel screw lids.

For robot End-of-arm tooling
Aluminium enclosure
With neodymium or ferrite magnets

Operation

Palletization magnet operation

Goudsmit magnetic palletizers use permanent magnetic force to lift and hold steel products in one go. They do this without a power supply.
Palletization magnets hold a layer of products for as long as needed.


Design

Unique design

The unique parallel mechanism of the palletization magnet guarantees a trouble-free production process, even with non-uniform loads. For example, when picking up a half layer with products.
The special Goudsmit design has a long service life, requires little maintenance and consumes little air.

Application

Applications per magnetic system
With Neoflux® (neodymium) medium pole magnet system.
For palletizing large filled tins.
Product dimensions:
tins: min. Ø65 mm (up to 0.6 kg) - max. Ø230 mm (up to 5 kg).
 
With Neodymium - Neoflux® - fine pole magnet system.
For palletizing extra-large filled tins and filled jars with screw lids.
Product dimensions:
screw lids: Ø34 mm (up to 0.45 kg)
screw lids: Ø42 mm (up to 0.85 kg)
screw lids: Ø56 mm (up to 1.1 kg)
screw lids: Ø82 mm (up to 2.2 kg)
screw lids: Ø110 mm (up to 4.0 kg)

Max. packing dimensions (LxWxH) : 400 x 300 x 250 mm
NAIL DIRECTOR MK25, 11 kW
SKU: SPSR250009
Aligners align long steel parts in the desired position and help to pack your product as compactly as possible. They are often used in automated packaging lines, for example nails and bolts.

For items such as nails and screws
For packages up to 35 kg
Electromagnet with air cooling
Electric control

Application

Aligning elongated products

Aligners facilitate the compact packaging of nails, bolts and other long ferromagnetic parts in automated packaging lines.

Maximum capacity: for packages up to 35 kg.
Switching: fully automatic, via an electric controller.

For dosed in-feed we suggest combining an aligner with a magnetic feed conveyor.

Length : 200 mm
HOLDING MAGNET NEO 200x41x25
SKU: OFNR200405
Stock: 170
Width: 41 mm
Shuttering magnets are permanent holding magnets. This allows you to quickly create a temporary setup. For example, when you want to fix metal profiles for use as a form while pouring a concrete floor. They also hold steel panels, beams, gates and moulds in place. This flexible system saves you time, money and manpower.

Permanent magnetic
Max. holding force: 9000 N
Compact design

Application

Use of shuttering magnets

These permanent holding magnets can be used to hold steel panels, beams, fences and moulds in place. A provision on the magnet enables the user to release the workpiece again.
 
Shuttering magnets have a high holding force. To achieve this, good contact with the surface is necessary, since even a small air gap will reduce the holding force.

Diameter : 220 mm
HRC-F-D220-d030-075-MR-B
SKU: TRBB220075
Stock: 7
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø30H7
Width: 75 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 220 mm
HRC-F-D220-d030-090-MR-B
SKU: TRBB220090
Stock: 13
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø30H7
Width: 90 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 220 mm
HRC-F-D220-d030-120-MR-B
SKU: TRBB220120
Stock: 8
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø30H7
Width: 120 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 400 mm
HRC-F-D400-d105-094-MR-B
SKU: TRBB400094
Stock *: 0
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø105H8
Width: 94 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 400 mm
HRC-F-D400-d105-110-MR-B
SKU: TRBB400110
Stock: 2
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø105H8
Width: 110 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 400 mm
HRC-F-D400-d105-145-MR-B
SKU: TRBB400145
Stock *: 0
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø105H8
Width: 145 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 400 mm
HRC-F-D400-d105-110-MR-N
SKU: TRBD400114
Stock *: 0
Magnet quality: Ferrite
Interface/connection dim's: Shaft hole Ø105H8
Width: 110 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 400 mm
HRC-N-D400-d105-110-MB-S
SKU: TRGG400110
Stock *: 0
Magnet quality: Neodymium
Interface/connection dim's: Shaft hole Ø105H8
Width: 110 mm
Magnetic conveyors roller are used for straight product flows with a small radius at a variable angle. The magnetic strength is constant.Magnet rollers are designed for installation between other - tapered - magnetic rails.Versions:• for 110 and 200 mm radius;• for empty and full tins;• for dry and wet conditions.

Radius 110 or 200 mm
Steel enclosure
With neodymium or ferrite magnets

Diameter : 220 mm
HRL-F-052/100-d025-B-F
SKU: TRUS006001
Stock: 17
Specific application: Lids Ø52 to 100 mm
Interface/connection dim's: Shaft hole Ø25H7
Magnetic lid stack rollers stack and unstack lids, rings and discs of various diameters.Examples include feeding lids to filling/sealing machines in the canning industry or stacking rings in production lines.

For lids from Ø52 to Ø180 mm
Mountable on Ø25 mm shaft
With ferrite magnets

Application

Application of a magnetic lid stack roller

Magnetic lid stack rollers are suitable for lid diameters from a minimum of 52 to a maximum of 180 mm.

Operation

Operation of magnetic lid stack rollers

The magnet rollers are delivered as two separate halves having a 25 mm shaft hole with keyway. Both halves can be mounted on a (non-magnetic) stainless steel shaft.
 
By varying the distance between the two halves, the roller can easily be adjusted to the desired product diameter.

Diameter : 250 mm
HRL-F-090/130-d025-B-F
SKU: TRUS010002
Stock *: 0
Specific application: Lids Ø90 to 130 mm
Interface/connection dim's: Shaft hole Ø25H7
Magnetic lid stack rollers stack and unstack lids, rings and discs of various diameters.Examples include feeding lids to filling/sealing machines in the canning industry or stacking rings in production lines.

For lids from Ø52 to Ø180 mm
Mountable on Ø25 mm shaft
With ferrite magnets

Application

Application of a magnetic lid stack roller

Magnetic lid stack rollers are suitable for lid diameters from a minimum of 52 to a maximum of 180 mm.

Operation

Operation of magnetic lid stack rollers

The magnet rollers are delivered as two separate halves having a 25 mm shaft hole with keyway. Both halves can be mounted on a (non-magnetic) stainless steel shaft.
 
By varying the distance between the two halves, the roller can easily be adjusted to the desired product diameter.

Diameter : 280 mm
HRL-F-118/180-d025-B-F
SKU: TRUS012003
Stock: 2
Specific application: Lids Ø118 to 180 mm
Interface/connection dim's: Shaft hole Ø25H7
Magnetic lid stack rollers stack and unstack lids, rings and discs of various diameters.Examples include feeding lids to filling/sealing machines in the canning industry or stacking rings in production lines.

For lids from Ø52 to Ø180 mm
Mountable on Ø25 mm shaft
With ferrite magnets

Application

Application of a magnetic lid stack roller

Magnetic lid stack rollers are suitable for lid diameters from a minimum of 52 to a maximum of 180 mm.

Operation

Operation of magnetic lid stack rollers

The magnet rollers are delivered as two separate halves having a 25 mm shaft hole with keyway. Both halves can be mounted on a (non-magnetic) stainless steel shaft.
 
By varying the distance between the two halves, the roller can easily be adjusted to the desired product diameter.

Magnetic system : Permanent magnet
HCT-F-B100-2000-C-N-N
SKU: TCMO100220
Conveying length: 2000 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Magnetic system : Electromagnet
HCT-E-B100-2000-C-R-N
SKU: TCMO100222
Conveying length: 2000 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Magnetic system : Electromagnet
HCT-E-B100-1500-C-R-N
SKU: TCMO100223
Conveying length: 1500 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Diameter : 40 mm
HRS-F-D040-d012-020-MB-B
SKU: TRBD040001
Stock *: 0
Max. magnet force: 60 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 50 mm
HRS-F-D050-d016-025-MB-B
SKU: TRBD050001
Stock *: 0
Max. magnet force: 120 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 63 mm
HRS-F-D063-d020-032-MB-B
SKU: TRBD063001
Stock *: 0
Max. magnet force: 175 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 80 mm
HRS-F-D080-d025-040-MB-B
SKU: TRBD080004
Stock *: 0
Max. magnet force: 340 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 100 mm
HRS-F-D100-d030-050-MB-B
SKU: TRBD100003
Stock *: 0
Max. magnet force: 540 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 125 mm
HRS-F-D125-d040-062-MB-B
SKU: TRBD125003
Stock *: 0
Max. magnet force: 830 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 160 mm
HRS-F-D160-d050-080-MB-B
SKU: TRBD160001
Stock *: 0
Max. magnet force: 1370 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 25 mm
HRS-F-D025-d010-015-07-B
SKU: TRBE025001
Stock *: 0
Max. magnet force: 24 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 32 mm
HRS-F-D032-d010-015-04-B
SKU: TRBE032001
Stock *: 0
Max. magnet force: 34 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 40 mm
HRS-F-D040-d012-027-07-B
SKU: TRBE040001
Stock *: 0
Max. magnet force: 50 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 50 mm
HRS-F-D050-d012-027-07-B
SKU: TRBE050001
Stock *: 0
Max. magnet force: 70 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 63 mm
HRS-F-D063-d016-039-07-B
SKU: TRBE063001
Stock *: 0
Max. magnet force: 100 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 80 mm
HRS-F-D080-d020-039-07-B
SKU: TRBE080001
Stock *: 0
Max. magnet force: 135 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Diameter : 100 mm
HRS-F-D100-d025-051-07-B
SKU: TRBE100001
Stock: 4
Max. magnet force: 185 N
Magnetic conveyor rollers for sheets are suitable for transporting steel sheets to and from processing machines. They have permanent magnetic force.

For thick and thin sheets
Easy to install
Maintenance-free
Permanent magnetic
With ferrite magnets

Application

Application of magnet roller for sheets:

Magnetic conveyor rollers for sheets maintain their magnetic force for life. The holding force can diminish, however, when the material being moved has a layer of paint or rust on the surface or when the process temperature becomes too high.
The specified holding force only applies if the sheet spans the entire width of the roller.

Advantages

Advantages of a magnet roller for sheets:
easy to install
maintenance-free
100% reliable operation
retains magnetic force for life

Conveying width : 225 mm
HSC-S-150-0800-1200-60-B-B-BR
SKU: TCBA150001
Magnet width: 150 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 275 mm
HSC-S-200-0800-1200-60-B-B-BR
SKU: TCBA200001
Magnet width: 200 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 325 mm
HSC-S-250-0800-1250-60-B-B-BR
SKU: TCBA250001
Magnet width: 250 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 375 mm
HSC-S-300-0800-1200-60-B-B-BR
SKU: TCBA300001
Magnet width: 300 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 475 mm
HSC-S-400-0800-1200-60-B-B-BR
SKU: TCBA400001
Magnet width: 400 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 575 mm
HSC-S-500-0800-1200-60-B-B-BR
SKU: TCBA500001
Magnet width: 500 mm
Conveying length: 2250 mm
Magnetic slide conveyors are suitable for the disposal of steel parts such as punch scrap, chips, nails, bolts, recycled materials or drilling waste in metal and steel factories and the sheet metal processing industry.

Require little maintenance, no belt wear
Conveying width: 225 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a Swan neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed, no external moving parts


Operation

Operation of a Swan neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Swan neck magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 9 - 42 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 275 mm
HSC-B-200-0800-1200-60-B-B-BR
SKU: TCBB200001
Magnet width: 200 mm
Conveying length: 2350 mm
Magnetic slide conveyors type Big neck are suitable for transporting long steel sheet parts.For example, punch scrap in metal and steel plants and in the sheet metal processing industry.

Large radius for long products
Conveying width: 275/375/475 mm
Conveying length: up to 15 m

Advantages

Advantages of a Big neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a Big neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Big neck magnetic slide conveyor:
maximum conveying width: 475 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 14 - 35 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 375 mm
HSC-B-300-0800-1200-60-B-B-BR
SKU: TCBB300001
Magnet width: 300 mm
Conveying length: 2350 mm
Magnetic slide conveyors type Big neck are suitable for transporting long steel sheet parts.For example, punch scrap in metal and steel plants and in the sheet metal processing industry.

Large radius for long products
Conveying width: 275/375/475 mm
Conveying length: up to 15 m

Advantages

Advantages of a Big neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a Big neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Big neck magnetic slide conveyor:
maximum conveying width: 475 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 14 - 35 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 475 mm
HSC-B-400-0800-1200-60-B-B-BR
SKU: TCBB400001
Magnet width: 400 mm
Conveying length: 2350 mm
Magnetic slide conveyors type Big neck are suitable for transporting long steel sheet parts.For example, punch scrap in metal and steel plants and in the sheet metal processing industry.

Large radius for long products
Conveying width: 275/375/475 mm
Conveying length: up to 15 m

Advantages

Advantages of a Big neck magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a Big neck magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a Big neck magnetic slide conveyor:
maximum conveying width: 475 mm
conveying length: as desired, up to 15 m
maximum conveying height: 12 m
capacity: 14 - 35 kg/min (punch scrap Ø7x1; 18 m/min; with 600 mm magnet spacing)
steep angle of rise of 60 degrees

Conveying width : 275 mm
HSC-F-200-1500-0000-00-B-B-BR
SKU: TCBC200001
Conveying length: 1500 mm
Magnet width: 200 mm
Flat magnetic slide conveyors are suitable for transporting steel parts such as punch scrap, chips, nails, bolts, recycled materials and drilling swarf.They are intended for metal and steel plants and the sheet processing industry.

Conveying width: 275 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a flat magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a flat magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a flat magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
capacity: 14 - 42 kg/min
(for punch scrap Ø7x1; at 18 m/min; with a magnet distance of 600 mm)

Conveying width : 325 mm
HSC-F-250-1500-0000-00-B-B-BR
SKU: TCBC250001
Conveying length: 1500 mm
Magnet width: 250 mm
Flat magnetic slide conveyors are suitable for transporting steel parts such as punch scrap, chips, nails, bolts, recycled materials and drilling swarf.They are intended for metal and steel plants and the sheet processing industry.

Conveying width: 275 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a flat magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a flat magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a flat magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
capacity: 14 - 42 kg/min
(for punch scrap Ø7x1; at 18 m/min; with a magnet distance of 600 mm)

Conveying width : 375 mm
HSC-F-300-1500-0000-00-B-B-BR
SKU: TCBC300001
Conveying length: 1500 mm
Magnet width: 300 mm
Flat magnetic slide conveyors are suitable for transporting steel parts such as punch scrap, chips, nails, bolts, recycled materials and drilling swarf.They are intended for metal and steel plants and the sheet processing industry.

Conveying width: 275 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a flat magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a flat magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a flat magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
capacity: 14 - 42 kg/min
(for punch scrap Ø7x1; at 18 m/min; with a magnet distance of 600 mm)

Conveying width : 475 mm
HSC-F-400-1500-0000-00-B-B-BR
SKU: TCBC400001
Conveying length: 1500 mm
Magnet width: 400 mm
Flat magnetic slide conveyors are suitable for transporting steel parts such as punch scrap, chips, nails, bolts, recycled materials and drilling swarf.They are intended for metal and steel plants and the sheet processing industry.

Conveying width: 275 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a flat magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a flat magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a flat magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
capacity: 14 - 42 kg/min
(for punch scrap Ø7x1; at 18 m/min; with a magnet distance of 600 mm)

Conveying width : 575 mm
HSC-F-500-1500-0000-00-B-B-BR
SKU: TCBC500001
Conveying length: 1500 mm
Magnet width: 500 mm
Flat magnetic slide conveyors are suitable for transporting steel parts such as punch scrap, chips, nails, bolts, recycled materials and drilling swarf.They are intended for metal and steel plants and the sheet processing industry.

Conveying width: 275 - 575 mm
Conveying length: up to 15 m

Advantages

Advantages of a flat magnetic slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a flat magnetic slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a flat magnetic slide conveyor:
maximum conveying width: 575 mm
conveying length: as desired, up to 15 m
capacity: 14 - 42 kg/min
(for punch scrap Ø7x1; at 18 m/min; with a magnet distance of 600 mm)

Conveying width : 154 mm
HSC-M-090-1000-0000-00-B-B-BR
SKU: TCBD090001
Magnet width: 90 mm
Conveying length: 1000 mm
Mini-magnetic slide conveyors are suitable for transporting small parts such as punch scrap and punched products.They are intended for metal and steel plants and the sheet (steel) processing industry.

Conveying width: 154 / 314 mm
Conveying length: up to 4 m

Advantages

Advantages of a magnetic mini flat bed slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a magnetic mini flat bed slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a magnetic mini flat bed slide conveyor:
maximum conveying width: 314 mm
conveying length: as desired, up to 4 m
capacity: 9 - 20 kg/min (punch scrap Ø7x1; 19 m/min; with 200 mm magnet spacing)

Conveying width : 314 mm
HSC-M-250-1000-0000-00-B-B-BR
SKU: TCBD250001
Magnet width: 250 mm
Conveying length: 1000 mm
Mini-magnetic slide conveyors are suitable for transporting small parts such as punch scrap and punched products.They are intended for metal and steel plants and the sheet (steel) processing industry.

Conveying width: 154 / 314 mm
Conveying length: up to 4 m

Advantages

Advantages of a magnetic mini flat bed slide conveyor:
no belt wear
requires little maintenance
no trapping of material, thanks to sealed construction
no damage to product or conveyor belt
dirt and moisture have no effect on operation
completely sealed; no external moving parts


Operation

Operation of a magnetic mini flat bed slide conveyor:

Magnets, spaced evenly along the length of a chain, are positioned beneath the stationary stainless steel slide sheet. The chain is driven.
These magnets thus move the steel parts along the slide sheet and carry them to the discharge end at the desired height.

Characteristics

Characteristics of a magnetic mini flat bed slide conveyor:
maximum conveying width: 314 mm
conveying length: as desired, up to 4 m
capacity: 9 - 20 kg/min (punch scrap Ø7x1; 19 m/min; with 200 mm magnet spacing)

0.8 N Self-adhesive with foam
GM23000102A
SKU: GM23000102A
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Self-adhesive with foam
GM23001600
SKU: GM23001600
Stock: 0
Thickness: 3 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001703A
SKU: GM23001703A
Stock: 0
Thickness: 1.5 mm
Roll width: 25.4 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001702B
SKU: GM23001702B
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001702A
SKU: GM23001702A
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001703B
SKU: GM23001703B
Stock: 0
Thickness: 1.5 mm
Roll width: 25.4 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001802A
SKU: GM23001802A
Stock: 0
Thickness: 1.5 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Self-adhesive with foam
GM23001900
SKU: GM23001900
Stock: 0
Thickness: 2 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.