Service unit 3-part »Standard«, Metal container, metal drip cap, Size 4, G 1 1/2, Input press. max. 25 bar, Control ra. 0.5-16 bar
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure,
with self-relieving design, centrifugal separator and proportional lubricator.

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 40, Stroke 1200, G 1/4, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3-way stainless steel ball valve, Pneumat. actuation drive, L-hole, Operating temp. -20°C to 70°C, Rp 1 1/4, DN 32, PN max 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Frequency:50 Hz
Speed:2785 1/min
Shaft Output:42 W
Volume Flow:225 m³/h
Pressure:Δp s312 Pa
Pressure:Δp t403 Pa
Density:1.2 kg/m³
Sound Pressure:64 dB(A)

Slim Safety light curtain type 4
SL4-34-0990-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 990 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Pk 150 Hk + Ag 150, 150W, 24V Dc Weight:8,88

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 930 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 63x51, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Service unit 3-part »Standard« with polycarbonate container, Size 4, G 1 1/4, Input pressure max. 16 bar, Control range 0.5-10 bar
Three-piece service units consisting of a reversible diaphragm pressure regulator, independent of inlet pressure,
with self-relieving design, centrifugal separator and proportional lubricator.

Suction/pressure hose, Heavy-duty design, Temp. -15°C to 60°C, Vacuum 0.9 bar, Hose Ø 72x60, PN at 20 °C max. 5 bar, Roll of 30 m
Transparent plastic hose with spiral steel wire embedded in the wall.

Suitable for process water, sludge and liquid manure under extreme conditions.
Extremely flexible and non-toxic. Acc. to 2007/19/EC.

IMPORTANT:
Hose sizes 50 x 40 mm and larger are shipped from our distribution centre in the Netherlands using a forwarding agent.

Filter for high pressures up to 40 bar, with manual bleeder valve, 40 µm, G 2, Medium temperature max. 60 °C
Centrifugal separators with a sintered filter element.

Filter for high pressures up to 40 bar, with manual bleeder valve, 40 µm, G 1 1/2, Medium temperature max. 60 °C
Centrifugal separators with a sintered filter element.

High performance pressure regulator with 2 pressure gauges, G 2, Control range 0.5 - 10 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 2, Control range 0.2 - 6 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 2, Control range 0.5 - 16 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 2, Control range 0.1 - 3 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

3-way brass ball valve, Pneumat. actuation drive, T-hole, Operating temperature -20°C to 70°C, Rp 1 1/2, DN 40, PN max. 25 bar
3-way cock, L-bore or T-bore, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1S006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000031
The REO444 range are no longer 'UL' or 'CSA' approved.

Slim Safety light curtain type 2
Type 2 according to EN 61496
Performance Level PL c (EN ISO 13849)
Safety Integrity Level: SIL 1 (IEC 61508), CL SIL 1 (ICE 62061)

Controlled height: 1170 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 690 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

ERM 160-160-BUX static frame sensor with 160 x 160 mm window size.

static operation
Active window 160 x 160 mm
Switching output: PNP and NPN, NO / NC selectable
Operating voltage: 15 - 30 V DC
Resolution: 2.0 mm
Connection: M8 connector, 4-pin

Our frame sensors are used in areas where objects are not only selectively but queried in one area. Due to their large number of parallel rays, they can detect objects in a wide window. Here, our frame sensors ensure consistently high resolution at any point within ..

3-way stainless steel ball valve, Pneumat. actuation drive, L-hole, Operating temp. -20°C to 70°C, Rp 1 1/2, DN 40, PN max 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Type : HG09
GAUSSMETER HGM09
SKU: 65.0000047
Stock: 7
With a gauss meter, you measure locally - on the surface - the magnetic flux density in units of tesla, gauss, Ka/m or oersted. Flux density is a measure of the amount of magnetic flux through a surface. Goudsmit also conducts magnetic measurements on site if desired.

Measures strength of magnetic field
Deliverable from stock
Readout in various units
Accurate
Various functions

Operation

Operation

Gauss meter measurements use the Hall effect as the measuring principle. The sensor captures the magnetic flux density that is perpendicular to the sensor plane. The magnetic field generates an output voltage on the sensor, which is proportional to the product of the magnetic field strength and the induced current.


1D gauss meter

Type HG09: Basic version - 1D gauss meter

For measurement on a surface. The basic version is a one-dimensional meter (1D) equipped with a single Hall sensor which measures the flux density in one direction.   Suitable for: accurately measuring flux densities in one direction with a large range (max. 4.5 T) both static and alternating fields and pulses thanks to a thin measuring probe, measurements very close to the surface and in crevices measurements of fields where the local field orientation is known. This gauss meter is used to measure peak flux density of permanent and electromagnetic systems for inspections.


3D gauss meter

Type 3 Axis VGM: 3D gauss meter

The 3D meter allows you to measure magnetic fields in a free space. This gauss meter is equipped with three Hall sensors, which measure the flux density in three directions (x, y and z).   Suitable for: measuring relatively low flux densities in three directions and the ensuing results - up to max. 80 mT; scanning magnetic fields with a set alarm level. Application examples: determining safe distances in connection with exposure to static magnetic fields (medical implants, projectile hazards, pregnant workers); measuring residual magnetism in products, for example before and after demagnetizing; determining local field orientation of magnetic fields.

Slim Safety light curtain type 4
SL4-34-0960-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 960 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

2-way stainless steel ball valve, Pneumat. actuation drive, single-acting, Operating temp. -20 °C to 70 °C, Rp 2, PN max. 63 bar
2-way cock, 3-piece, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 900 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 2
Type 2 according to EN 61496
Performance Level PL c (EN ISO 13849)
Safety Integrity Level: SIL 1 (IEC 61508), CL SIL 1 (ICE 62061)

Controlled height: 1140 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Storz reducer, Stainless steel V4A, Storz size 110-A, Tappet distance 133, Flange DN 100, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 32, Stroke 2000, G 1/4, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Stainless steel filter regulator, 1.4404, with secondary venting (reversible), incl. press. gauge, G 1/4, Control range 1 - 15 bar
Stainless steel filter regulators with self-relieving (not for liquid media) containing no non-ferrous metals for use in the food processing, chemical, mining, plant construction and special machinery industries as well as in the medical technology.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 53x40, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Pressure regulator DRV 200, Standard design, non-reversible, incl. pressure gauge, G 2, Control range 1.5 - 8 bar
Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence
minimal friction.
Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

3-way stainless steel ball valve, Pneumat. actuation drive, T-hole T2, Operating temp. -20 °C to 70 °C, Rp 1 1/2, PN max. 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

3-way stainless steel ball valve, Pneumat. actuation drive, T-hole T1, Operating temp. -20 °C to 70 °C, Rp 1 1/2, PN max. 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

1 1-4 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

Slim Safety light curtain type 4
SL4-34-0930-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 930 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Service station SAFETY »multifix«, Ball valve - start-up valve - filter regulator, Size 5, G 1, Input pressure 2 - 16 bar
These compressed air service unit sets, comprising a ball valve with silencer, a start-up valve and one out of a pressure regulator, filter regulator or service unit, meet even the strictest requirements for operating reliability and accident prevention!

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 660 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 870 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Compressed air hose set with hose rupture valve »Hose guard«, PU hose, G 1/2 ET, Hose Ø 18x13, Hose length 10 m
Braided PU hose with integrated rupture hose valve type »Hose Guard« and screwed stem with a G 3/8 or G 1/2 male thread.

1 1-4 inch, 130 C

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

internal term: P-ND One way : yes 2 way with a standing inner tube: no
190 C 17,0 bar water
Universal use – cooling, heating, clamping
With bellows sealing
Cartridge fast change CD-cartridge-design
Sealingmaterial ceramics/graphite
Ballbearings (can be relubricated)
No elastomers – therefore no temperature and chemical resistance problems
No loose parts, f.e. springs
Robust and less influence of dirty media
Self supporting – no additional support necessary
Available in stainless steel

1 1-4 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

Pk 150 Hk-Ex, 150W, 24V Dc Weight:7,34

Slim Safety light curtain type 2
Type 2 according to EN 61496
Performance Level PL c (EN ISO 13849)
Safety Integrity Level: SIL 1 (IEC 61508), CL SIL 1 (ICE 62061)

Controlled height: 1110 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Active charcoal filter with differential pressure gauge, 0.005 mg/m³, G 2, Input pressure 4 - 16 bar, Temp. 5 °C to 60 °C
For adsorbing vaporous media.
A micro-filter must be connected upstream if dried air is not available.

1 1-4 inch, 130 C

Stainless steel ball valve, Pneumatic actuation drive, single-acting, Operating temp. -20 °C to 150 °C, Rp 2, PN max. 40 bar
Ball valves with pneumatic actuator. Pneumatic, double-piston, part-turn actuator, double-rocker principle.

Stainless steel pressure regulator, 1.4404, without secondary venting (non-reversible), G 1/2, Control range 0.5 - 8 bar
Stainless steel regulators containing no non-ferrous metals for use in the food processing, chemical, mining,
plant construction and special machinery industries as well as in the medical technology.

Stainless steel pressure regulator, 1.4404, without secondary venting (non-reversible), G 1/2, Control range 1 - 15 bar
Stainless steel regulators containing no non-ferrous metals for use in the food processing, chemical, mining,
plant construction and special machinery industries as well as in the medical technology.

Large pressure regulator with 2 pressure gauges for inlet and outlet pressures, G 2, Control range 0.5 - 6 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the button down.

Large pressure regulator with 2 pressure gauges for inlet and outlet pressures, G 2, Control range 0.5 - 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the button down.

Large pressure regulator with 2 pressure gauges for inlet and outlet pressures, G 2, Control range 0.5 - 16 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the button down.

Large pressure regulator with 2 pressure gauges for inlet and outlet pressures, G 2, Control range 0.5 - 10 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the button down.

Compact ejector »CP«, Digital vacuum switch, Nozzle size 2.5 mm, NC, Compressed air / vacuum conn. G 1/4 IT, G 3/8 IT, PN 5-6 bar
Purely pneumatic vacuum ejector that operates on the Venturi principle. Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.

Properties:
Vacuum generator with integrated control valves and system monitoring functionsGripping and blowing off can be controlled without the need for external valvesOptimised air consumption thanks to many models with differing suction capacitiesMinimum energy costs in continuous operation thanks to automatic air-savingEasy adjustment with foil keypad and LED display of the settings

Applications:
Handling of air-tight or slightly porous workpieces in fully automated handling
systems, e.g. in the robotics, automotive, packaging, electronics, electrical
engineering and metalworking industries.

Strong light high-performance segment ring light for working distances of 150 mm - 500 mm.
The tremendously bright and variably deployable high power LED ring light RL12 was developed for a variety of applications in microscopy, production and industrial image processing. The 12 high-power LEDs, the ring light, which are housed in a compact metal housing, have a long lifetime and are characterized by a strong light intensity. With the dedicated controller TC each segment can be activated or deactivated separately. Thus, the shadow can be conveniently regulated in each direction. The brightness can be adjusted continuously.
The LED ring light RL12 are available in many variants, whereby each user the appropriate lighting in terms of brightness, working distance, light color and optics meet can. The modular design enables a factory replacement of the LED modules. With the help of numerous accessories the ring light kan addition to individual needs and requirements to be adjusted. For example, there is a polarization filter, and various reducing rings to adapt the inner diameter, whereby the LED-power ring light can be installed in many devices such as cameras or microscopes.

Ideal Working Distance 270 mm
Max. Clamping diameter 66 mm
Robust aluminum housing in modern design
Brightness of 0 - 100% adjustable
Four switchable segments with variable rotation speed
Flicker-free light through optimized, low-loss electronic
Variable clamping diameter, adaptable with reducing
Available in different colors of light and color temperatures

► delivery: LED ring light RL12-10s-S40, Table controls for segment and brightness control, power supply

Strong light high-performance segment ring light for working distances of 50 mm - 800 mm.
The tremendously bright and variably deployable high power LED ring light RL12 was developed for a variety of applications in microscopy, production and industrial image processing. The 12 high-power LEDs, the ring light, which are housed in a compact metal housing, have a long lifetime and are characterized by a strong light intensity. With the dedicated controller TC each segment can be activated or deactivated separately. Thus, the shadow can be conveniently regulated in each direction. The brightness can be adjusted continuously.
The LED ring light RL12 are available in many variants, whereby each user the appropriate lighting in terms of brightness, working distance, light color and optics meet can. The modular design enables a factory replacement of the LED modules. With the help of numerous accessories the ring light kan addition to individual needs and requirements to be adjusted. For example, there is a polarization filter, and various reducing rings to adapt the inner diameter, whereby the LED-power ring light can be installed in many devices such as cameras or microscopes.

Ideal Working Distance 140 mm
Max. Clamping diameter 66 mm
Robust aluminum housing in modern design
Brightness of 0 - 100% adjustable
Four switchable segments with variable rotation speed
Flicker-free light through optimized, low-loss electronic
Variable clamping diameter, adaptable with reducing
Available in different colors of light and color temperatures

► delivery: LED ring light RL12-18f-S40, Table controls for segment and brightness control, power supply

Strong light high-performance segment ring light for working distances of 90 mm - 180 mm.
The tremendously bright and variably deployable high power LED ring light RL12 was developed for a variety of applications in microscopy, production and industrial image processing. The 12 high-power LEDs, the ring light, which are housed in a compact metal housing, have a long lifetime and are characterized by a strong light intensity. With the dedicated controller TC each segment can be activated or deactivated separately. Thus, the shadow can be conveniently regulated in each direction. The brightness can be adjusted continuously.
The LED ring light RL12 are available in many variants, whereby each user the appropriate lighting in terms of brightness, working distance, light color and optics meet can. The modular design enables a factory replacement of the LED modules. With the help of numerous accessories the ring light kan addition to individual needs and requirements to be adjusted. For example, there is a polarization filter, and various reducing rings to adapt the inner diameter, whereby the LED-power ring light can be installed in many devices such as cameras or microscopes.

Ideal Working Distance 140 mm
Max. Clamping diameter 66 mm
Robust aluminum housing in modern design
Brightness of 0 - 100% adjustable
Four switchable segments with variable rotation speed
Flicker-free light through optimized, low-loss electronic
Variable clamping diameter, adaptable with reducing
Available in different colors of light and color temperatures

► delivery: LED ring light RL12-18s-S40, Table controls for segment and brightness control, power supply

Strong light high-performance segment ring light for working distances of 40 mm - 220 mm.
The tremendously bright and variably deployable high power LED ring light RL12 was developed for a variety of applications in microscopy, production and industrial image processing. The 12 high-power LEDs, the ring light, which are housed in a compact metal housing, have a long lifetime and are characterized by a strong light intensity. With the dedicated controller TC each segment can be activated or deactivated separately. Thus, the shadow can be conveniently regulated in each direction. The brightness can be adjusted continuously.
The LED ring light RL12 are available in many variants, whereby each user the appropriate lighting in terms of brightness, working distance, light color and optics meet can. The modular design enables a factory replacement of the LED modules. With the help of numerous accessories the ring light kan addition to individual needs and requirements to be adjusted. For example, there is a polarization filter, and various reducing rings to adapt the inner diameter, whereby the LED-power ring light can be installed in many devices such as cameras or microscopes.

Ideal Working Distance 100 mm
Max. Clamping diameter 66 mm
Robust aluminum housing in modern design
Brightness of 0 - 100% adjustable
Four switchable segments with variable rotation speed
Flicker-free light through optimized, low-loss electronic
Variable clamping diameter, adaptable with reducing
Available in different colors of light and color temperatures

► delivery: LED ring light RL12-25f-S40, Table controls for segment and brightness control, power supply