60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.

Color Ral 7035 Weight:15

Proportional control valve »sentronic D«, 3-way design, digital, 24 V DC, G 3/8, DN 8, Pressure range 0 - 10 bar
For electronic pressure control.

Highly dynamic, 3-way proportional valve with digital control.

D stands for:
- Digital communication and control
- Display (integrated)
- Directly operated
- Dynamic (high-speed)

A special feature is the DaS software (see "Downloads") that provides optimum controller adjustment over a PC (RS 232 interface). This software additionally allows the setpoint and actual value to be visualised.
Other functions are valve diagnostics, parameter setting and maintenance. The valve's outlet pressure can also be adjusted using the integrated display and the function buttons, and the valve can optionally be operated without a PC.

Benefits:
- Minimum hysteresis
- Extremely short response times
- Extremely low sensitivity
- No constant air consumption
- Analogue actual value output
- Digital control
- High speed
- Communication with a PC

Length : 360 mm
SVM-N-158x32-0300-F-F1M
SKU: SVMN030300
Stock: 3
Type: VMN3 (with flange)
Advised max. installation height: - (n/a) mm
Neodymium magnetic plates are extremely powerful, compact and lightweight. They are suitable for separation of ferrous contaminants from 30 µm to 3 mm.Completely stainless steel and watertight. Suitable for the food industry.

Neodymium GSN-35, Br 11,200 gauss (at 20 °C), Tmax. 80 °C
Capture Fe particles from 30 µm
Manual cleaning (wipe off)
Completely stainless steel and watertight
Max. holding field 180 mm

Application

Small ferrous contaminants / lightweight / food

Neodymium magnetic plates are extremely powerful, compact and lightweight. They are used when ferromagnetic (Fe) particles smaller than 3 mm must be separated. Completely stainless steel and watertight. Suitable for the food industry.
 
You can easily hang them suspended above a conveyor belt yourself, attach them to the wall of a product channel, or mount them under a passing product stream. For dust-tight installation against the wall of a free-fall pipe channel, we also supply neodymium plate magnets including a mounting plate and quick-cleaning mechanism (see chute magnets).
 
If the product comes in direct contact with the magnet, we recommend type 3; this has an extremely high field strength at the magnet yet a compact field, which also makes it ideal for capturing weakly magnetic particles, such as stainless steel scrapings. Type 2 was developed for overbelt placement or installation in a free-fall line with mounting plate.
 
* Note: If you are considering overbelt placement, keep in mind that the construction directly beneath the magnet must be made of non-magnetic material.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

Magnet quality: N-35
Completely stainless steel housing
Watertight
Smooth finished weldings
Finish: grit blasted


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

Cleaning of the plate magnet is performed manually by wiping, or through use of a hinged extractor plate for quick-cleaning. You can swing the hinged extractor plate away from the magnet. The ferrous particles fall off of the extractor plate as soon as they are moved far enough away from the magnet.
 
For plate magnets including mounting plate and hinged cleaning construction: see also 'chute magnets'.

1 1-2 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

1 1-2 inch, 130 C

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 900 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1200 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Smart Positioner

1 1-2 inch, 130 C N-model: carbon graphite/silicon carbide seal (standard seal)
D-model: silicon carbide/silicon carbide seal (for applications with poor filtration water, or abrasive fluids)
Ballbearings (can be relubricated)
Robust and less influence of dirty media
Self supporting in innovative lightweightdesign – no additional support necessary
Rotor stainless steel

1 1-2 inch, 130 C

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 400, G 3/8, Working pressure 1 - 8 bar, Temp. -10 °C to 80 °C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 35x25, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Triphasic servomotor (3-400V)

Service station SAFETY »multifix«, Ball valve - start-up valve - 2-part service unit, Size 5, G 1, Input pressure 2 - 16 bar
These compressed air service unit sets, comprising a ball valve with silencer, a start-up valve and one out of a pressure regulator, filter regulator or service unit, meet even the strictest requirements for operating reliability and accident prevention!

60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.

3-way stainless steel ball valve, Pneumat. actuation drive, L-hole, Operating temp. -20°C to 70°C, Rp 1 1/2, DN 40, PN max 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1170 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 870 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 59x45, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

SG4-14-090-OO-E safety light curtain type 4 with resolution of 14 mm (finger protection) and a protective height of 900 mm.
Type 4 (IEC 61496)
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SILCL3 (IEC 62061)

Comfort series with integrated restart interlock and external device monitoring
Controlled height: 900 mm
Range: 0.2 ... 6 m
Resolution: 14 mm (finger protection)
Safety outputs: 2 OSSD semiconductor PNP
Connection: Receiver: M12, 8-pole; Channel: 4-pole

Scope of supply: transmitter and receiver unit, assembly parts.

5-ways solenoid valve

2 ways modulate pneumatic valve

DS2-05-07-030 JV AREAscan surface and profile light grids
The light curtain DS2 series can be used by objects for the collection, the survey, the dimensional control and positioning. The device configuration is done manually via the internal DIP switch or via a graphical user interface of an external PC.
Operating voltage: 24 V DC ± 20%
Light: infrared, 880 nm
Measuring field height: 300 mm
Range: 0.3 ... 5 m
Accuracy of the relative measurement: ± 6 mm
Accuracy of the absolute measurement: 6 mm
Output: Analog 0 ... 10 V / 1 PNP
Connection: Receiver: M12, 8-pole; Channel: 4-pole

Suitable for belt width : 400 mm
RHP-B114A06-040-RSD-BA
SKU: RHAN11040000
Stock *: 0
Diameter: 114.3 mm
Magnet field strength (flux density) (±10%): 3000 gauss
Magnetic system: Permanent Neoflux® magnet
Magnetic head pulleys capture ferrous and weakly magnetic particles and continuously carry them away. Suitable for installation in existing belt conveyor systems, in the bulk transshipment or recycling industries for example.

Cost-effective and robust
With neodymium or ferrite magnets
Permanent magnet
Automatic cleaning (continuous)
According to your requirements

Application

Application

A magnetic head pulley, or head roller magnet, separates ferromagnetic particles, such as iron or steel, and even weakly magnetic particles (such as particles from processed stainless steel) from coarse to very fine fractions and carries them away completely automatically and continuously. This magnetic roller is built into an existing conveyor belt system as a head or tail roller. and is a cost-effective magnetic metal separator. It is important to feed the material onto the conveyor belt with the magnetic conveyor roller in a thin layer (ideally a mono-layer). Magnetic head pulleys require practically no maintenance, and because these magnets are integrated in an existing installation there are almost no extra operating and energy costs.
 
For larger layer thickness a head roller magnet can be combined with a suspension or overband magnet. In this configuration the suspended magnet draws the pieces of steel out of the upper layer and the head roller magnet draws them from the lower layers of the bulk flow. Magnetic head roller separators are particularly well suited for separation of problematic shapes such as ball bearings or batteries. They are used for:

recycling and/or recovery of ferrous metals
removing, purging or eliminating ferrous parts or weakly magnetic particles from product flows
protection of machines (prevention of damage caused by metal particles)


Placement

Placement

Keep the following in mind when integrating a magnetic head pulley:

Use of head scrapers is not possible. Otherwise iron particles would be scraped off before the magnet can separate them.
No steel components in the vicinity of the head roller magnet (such as the splitter: it must be made of a non-magnetic material). Otherwise this part will be magnetized, which has a negative impact on the separation.
The field depth of the magnet.
Type of magnet system in combination with the belt thickness. The optimal placement/position of the separation partition depends on the application.

 
Goudsmit has plenty of experience with this and will be happy to provide recommendations.

Design

Design

Magnetic head pulleys are made in standard sizes and can therefore be easily integrated into an existing installation. The shaft diameter, for example, is suitable for SNL bearing blocks, and the shaft journal (including keyway) is suitable for a standard SEW gear unit. These are global standards and therefore cover most applications. The modular design makes it easy to replace the shaft, which is ideal for maintenance and customer-specific solutions. Various versions available to meet your needs:

Belt width: 400-2000 mm
Diameters: 150-400 mm
Magnet system: both axial and radial magnet construction


Working principle

Working principle

A magnetic head pulley is a head or tail roller that is filled with magnets. This roller forms a magnetic system with a correspondingly rotating magnetic field that is active around the entire circumference. The magnetic field attracts ferromagnetic metal particles in a product flow. The conveyor belt that runs over the roller carries these particles with it to the underside of the roller. When they are no longer in range of the magnetic field they fall off the belt, where they are collected and/or carried away. For strongly magnetic particles, we can place cleats on the belt to 'push' the particles out of the magnetic field.
 
For damp or fine metal particles we fit a scraper to prevent them from sticking to the belt. The advantage of a head roller magnet is that it is a continuous system, so there is no need to stop the product flow to carry off the separated metal particles. This makes the head roller magnet very suitable for product flows with lots of Fe particles. Because the product passes very close to the magnet it is also a very powerful and effective separator.

Magnet width : 920 mm
MAGNETIC SWEEPER W920 RMS3
SKU: SEMV092020
Stock *: 0
Type: RMS3 - manually operated
Magnetic system: Permanent ferrite magnet
Magnetic brooms sweep up iron and steel parts from clean or rough floors or sandy surfaces. In short, in places where iron is not or very difficult to sweep together or is not visible, such as in sand.The brooms collect metal debris, such as nails, screws, nuts, chips and grinding dust in workshops, factory halls, festival areas, exhibition halls and on paved or sandy parking lots or camping grounds. Fast and easy cleanable.

Push manually or tow as a trailer
Permanent magnet
Magnet width 300-1600 mm
Quick cleaning through use of extractor plates
Engineering, production & service

Application

Sweeping floors to clean them from iron particles

Magnetic brooms (magnetic sweepers) 'sweep up' iron particles from clean or rough floors or sandy surfaces. They work well in areas where it is very difficult to sweep up iron (or just the iron and nothing else) or it is not visible, such as in sand.
 
The strong magnet in the broom collects metal debris, such as nails, screws, nuts, chips and grinding dust in workshops, factory halls, festival areas, exhibition halls and on paved or sandy parking lots or camping grounds.

Types

We have standard types and 'specials' available

In addition to the standard magnetic brooms on this page, we are happy to make a special broom for you on request. Other dimensions or attachments for forklift forks or trailers, etc.

Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Cleaning (iron disposal)

Cleaning & discharging of caught iron particles

Bar magnet type
The bar magnet has a scraper ring, with which you can slide the captured iron particles to the side. There the iron automatically falls from the bar housing.
 
Plate magnet type
This type of magnetic broom contains a strong plate magnet with a hinged separator plate (extractor plate) in front. After the floor has been swept the separation plate can be swung away, causing the iron particles to automatically fall off. It can then easily be swept up with a dustpan and broom.

Proportional control valve »sentronic D«, 3-way design, digital, 24 V DC, G 1/4, DN 8, Pressure range 0 - 10 bar
For electronic pressure control.

Highly dynamic, 3-way proportional valve with digital control.

D stands for:
- Digital communication and control
- Display (integrated)
- Directly operated
- Dynamic (high-speed)

A special feature is the DaS software (see "Downloads") that provides optimum controller adjustment over a PC (RS 232 interface). This software additionally allows the setpoint and actual value to be visualised.
Other functions are valve diagnostics, parameter setting and maintenance. The valve's outlet pressure can also be adjusted using the integrated display and the function buttons, and the valve can optionally be operated without a PC.

Benefits:
- Minimum hysteresis
- Extremely short response times
- Extremely low sensitivity
- No constant air consumption
- Analogue actual value output
- Digital control
- High speed
- Communication with a PC

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1140 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
SL4-34-1200-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1200 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Length : 1100 mm
SVM-F-204x92-1100-B-F0E
SKU: SVMF041100
Stock *: 0
Type: VMF4
Advised max. installation height: 70-110 mm
Interface/connection dim's: Threaded hole M8 (8x)
Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C.They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.

Magnet quality ferrite GSFD-33 (Br 4100 gauss)
Capture Fe particles from 0.5 mm
Manual cleaning (wipe off)
Max. temp. 100 °C
Max. holding field 140 mm

Application

Ferrous contaminants > 0.5 mm / heavy / non-food

Ferrite plate magnets are cost-effective, yet less powerfull and larger than neodymium plate magnets. They have the advantage that they can be used up to 100 °C. They remove ferrous contaminants from 0.5 mm. Not suitable for weakly magnetic stainless steel contamination.
 
Select your magnet size on the desired holding field depth. The deeper the field should reach, the heavier and larger magnet you have to select. For this reason it can be wise to select the more compact and strong neodymium (Neoflux®) plate magnets.
 
Placement
You can easily hang them suspended over a conveyor belt, attach them to the wall of a product channel, or mount them under a passing product stream. For dust-tight installation against the wall of a free-fall pipeline, we supply neodymium plate magnets including a mounting plate and quick-cleaning mechanism (see chute magnets).
 
* When placing above a belt, make sure that the construction directly below the magnet consists of non-magnetic material.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

Magnet quality: ferrite GSFD-33
Material cap: stainless steel
Material contact plate: Steel
Finish: painted


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Cleaning

Cleaning of the plate magnet is performed manually by wiping, or through use of a hinged extractor plate for quick-cleaning. You can swing the hinged extractor plate away from the magnet. The ferrous particles fall off of the extractor plate as soon as they are moved far enough away from the magnet.
 
For plate magnets including mounting plate and hinged cleaning construction: see also 'chute magnets'.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 73x60, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

SG4-30-135-OO-X Safety light curtain type 4 with 30 mm resolution (finger protection) and a protective height of 1350 mm.
Type 4 (IEC 61496)
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SILCL3 (IEC 62061)

Basic series with standardized M12, 5-pin connection technology
Controlled height: 1350 mm
Range: 0.2 ... 19 m
Resolution: 30 mm (finger protection)
Safety outputs: 2 OSSD semiconductor PNP

Scope of supply: transmitter and receiver unit, assembly parts.

RDC14 CA
RDC14MF0,04CA160
DC Tachogenerators are used as speed monitoring devices, they convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
They are most often used when mounted on to the back of a DC Motor and supply the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 40V/1000RPM.
Part Number /0000048

Storz adapter, Stainless steel V4A, Storz size 100, Tappet distance 115 mm, G 4 ET, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 840 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 55x42, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 300, G 3/8, Working pressure 1 - 8 bar, Temp. -10 °C to 80 °C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Counter display with 30 x safety couplings I.D. 7.8, Bi-Tec type and 30 x nipples for couplings I.D. 7.2 - I.D. 7.8
Counter displays offer a cross-section of safety-relevant products for compressed air applications.
Make your checkout area more attractive and increase your turnover through counter sales. These eye-catching counter displays underline your expertise in the pneumatics world.

Parts included:
15 x safety coupling DN 7.4, pushbutton type,
with male thread, 5 each G 1/4, G 3/8, G 1/2

15 x safety coupling DN 7.4, pushbutton type,
with female thread, 5 each G 1/4, G 3/8, G 1/2

15 x plug, for couplings DN 7.2 to DN 7.8,
with male thread, 5 each G 1/4, G 3/8, G 1/2

15 x plug, for couplings DN 7.2 to DN 7.8,
with female thread, 5 each G 1/4, G 3/8, G 1/2

Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO588US, REO 588US, RE0588US, RE0 588US

Slim Safety light curtain type 4
SL4-34-1170-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1170 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1110 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

SG4-30-120-OO-E safety light curtain type 4 with 30 mm resolution (finger protection) and a protective height of 1200 mm.
Type 4 (IEC 61496)
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SILCL3 (IEC 62061)

Comfort series with integrated restart interlock and external device monitoring
Controlled height: 1200 mm
Range: 0.2 ... 19 m
Resolution: 30 mm (finger protection)
Safety outputs: 2 OSSD semiconductor PNP
Connection: Receiver: M12, 8-pole; Channel: 4-pole

Scope of supply: transmitter and receiver unit, assembly parts.

RDC14 MF 0.04 CA
PRE0003
RDC14MF0,04CA160
Industrial Applications, Machine Tools, Robots (60v)
Also referred to as RDC 205, RDC 208

Proportional control valve »sentronic D«, 3-way design, digital, 24 V DC, G 1/4, DN 4, Pressure range 0 - 10 bar
For electronic pressure control.

Highly dynamic, 3-way proportional valve with digital control.

D stands for:
- Digital communication and control
- Display (integrated)
- Directly operated
- Dynamic (high-speed)

A special feature is the DaS software (see "Downloads") that provides optimum controller adjustment over a PC (RS 232 interface). This software additionally allows the setpoint and actual value to be visualised.
Other functions are valve diagnostics, parameter setting and maintenance. The valve's outlet pressure can also be adjusted using the integrated display and the function buttons, and the valve can optionally be operated without a PC.

Benefits:
- Minimum hysteresis
- Extremely short response times
- Extremely low sensitivity
- No constant air consumption
- Analogue actual value output
- Digital control
- High speed
- Communication with a PC

2-way brass ball valve, Pneumat. actuation drive spring switching, Operating temp. max. 70 °C, Rp 3, DN 80, PN max. 16 bar
2-way cock, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

2-way brass ball valve, Pneumat. actuation drive spring opening, Operating temp. max. 70 °C, Rp 3, DN 80, PN max. 16 bar
2-way cock, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 810 mm
Range: 0.2 ... 6 m
Resolution: 14 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
SL4-34-1140-E
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1140 mm
Range: 0.2 ... 6 m
Resolution: 34 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Slim Safety light curtain type 4
Type 4 according to EN 61496
Performance Level PL e (EN ISO 13849)
Safety Integrity Level: SIL 3 (IEC 61508), SIL CL 3 (ICE 62061)

Controlled height: 1080 mm
Range: 0.2 ... 6 m
Resolution: 24 mm
Connection: transmitter and receiver: M12 5-pin
Safety outputs: 2 OSSD semiconductor PNP
Power supply: DC 24 V +/- 20%
IP 65 (EN 60529)

Scope of supply: transmitter and receiver unit, assembly parts.
Note: A detailed description of the safety light curtains can be found in the operating instructions.

Spiral wrap for tubing, Polyethylene, natural, 12x9 mm, Number of bundled hoses 20 x 5/3, 15 x 6/4, 8 x 8/6, 5 x 10/8

Rotating joint for machine tool spindles
Single input / output line

Rotating joint for machine tool spindles
Single input / output line

TCP measuring instrument 40mm
Protective collar to prevent damage and soiling of the optical systems
Fitting holes for exact positioning
Especially compact construction
Reduced mounting and calibration effort
Fitting holes for exact positioning
Adjustment in X-, Y- and Z-axis

Suction/pressure hose, Heavy-duty design, Temp. -15°C to 60°C, Vacuum 0.9 bar, Hose Ø 92x80, PN at 20 °C max. 4 bar, Roll of 30 m
Transparent plastic hose with spiral steel wire embedded in the wall.

Suitable for process water, sludge and liquid manure under extreme conditions.
Extremely flexible and non-toxic. Acc. to 2007/19/EC.

IMPORTANT:
Hose sizes 50 x 40 mm and larger are shipped from our distribution centre in the Netherlands using a forwarding agent.

RE 0444 RT 1B 0.05 CA
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
The REO444R1S006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000031
The REO444 range are no longer 'UL' or 'CSA' approved.

High performance pressure regulator with 2 pressure gauges, G 1 1/2, Control range 0.5 - 16 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 1 1/2, Control range 0.5 - 10 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 1 1/2, Control range 0.2 - 6 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.

High performance pressure regulator with 2 pressure gauges, G 1 1/2, Control range 0.1 - 3 bar, Input pressure max. 25 bar
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design
for very high flow rates.
Separate indication of input and working pressure on two pressure gauges.
The pressure setting can be locked by pushing the knob down.