Neodymium (NdFeB) 500 N
PM-HS-N-SG-D40x8xd5,5/10.3
SKU: GM17429
Stock: 0
Holding force: 500 N
Height: 8 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with countersunk hole are available in various sizes and types such as neodymium, ferrite and AlNiCo.

Available in various sizes
Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Tension on the magnet

For pot magnets with a cylinder hole, the magnet has a countersunk hole. Tighten with caution. Excessive tightening causes magnetic splinters or cracks in the magnet.

Product inlet/-outlet diameter : 600 mm
SPP-7-FI-FO-ST-B-BB
SKU: SPPE000067
Stock *: 0
Type: PM7
Max. capacity: 550 m³/h
Build-in length: 1300 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Neodymium (NdFeB) 310 N
PM-HS-N-SG-D32x7xd5.5/11
SKU: GM17428
Stock: 100
Holding force: 310 N
Height: 7 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with countersunk hole are available in various sizes and types such as neodymium, ferrite and AlNiCo.

Available in various sizes
Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Tension on the magnet

For pot magnets with a cylinder hole, the magnet has a countersunk hole. Tighten with caution. Excessive tightening causes magnetic splinters or cracks in the magnet.

Neodymium (NdFeB) 105 N
PM-HS-N-SG-D20x6xd4.5/9.3
SKU: GM17426
Stock: 9
Holding force: 105 N
Height: 6 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with countersunk hole are available in various sizes and types such as neodymium, ferrite and AlNiCo.

Available in various sizes
Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Tension on the magnet

For pot magnets with a cylinder hole, the magnet has a countersunk hole. Tighten with caution. Excessive tightening causes magnetic splinters or cracks in the magnet.

Neodymium (NdFeB) 75 N
PM-HS-N-SG-D16x4.5xd3.5/6.6
SKU: GM17425
Stock: 130
Holding force: 75 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a countersunk hole for easy mounting. The bolt with a flat countersunk head falls flush with or in the top of the magnet. This optimizes the attracting surface of the pot magnet. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with countersunk hole are available in various sizes and types such as neodymium, ferrite and AlNiCo.

Available in various sizes
Deliverable from stock
Easy to install
Available in various qualities

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Tension on the magnet

For pot magnets with a cylinder hole, the magnet has a countersunk hole. Tighten with caution. Excessive tightening causes magnetic splinters or cracks in the magnet.

32 mm Samarium-Cobalt (SmCo)
SMCO POT VLAK 32X7
SKU: GM17108
Stock: 0
Holding force: 220 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

25 mm Samarium-Cobalt (SmCo)
SMCO POT VLAK 25X7
SKU: GM17107
Stock: 0
Holding force: 150 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

20 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D20x6
SKU: GM17106
Stock: 40
Holding force: 90 N
Height: 6 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

16 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D16x4.5
SKU: GM17105
Stock: 8
Holding force: 60 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

13 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D13x4.5
SKU: GM17104
Stock: 10
Holding force: 40 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

10 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D10x4.5
SKU: GM17103
Stock: 18
Holding force: 20 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

8 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D8x4.5
SKU: GM17102
Stock: 1
Holding force: 11 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

6 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D6x4.5
SKU: GM17101
Stock: 23
Holding force: 5 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

80 mm Ferrite
GM16410
SKU: GM16410
Stock: 0
Holding force: 600 N
Height: 18 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

63 mm Ferrite
PM-BA-FE-SG-D63x14-B
SKU: GM16409
Stock: 0
Holding force: 350 N
Height: 14 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

50 mm Ferrite
PM-BA-FE-SG-D50x10-B
SKU: GM16408
Stock: 100
Holding force: 220 N
Height: 10 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

40 mm Ferrite
GM16407
SKU: GM16407
Stock: 0
Holding force: 125 N
Height: 8 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

32 mm Ferrite
PM-BA-F-SG-D32x7
SKU: GM16406
Stock: 0
Holding force: 80 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

25 mm Ferrite
PM-BA-F-SG-D25x7
SKU: GM16405
Stock: 0
Holding force: 40 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

20 mm Ferrite
PM-BA-F-SG-D20x6
SKU: GM16404
Stock: 0
Holding force: 30 N
Height: 6 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

16 mm Ferrite
PM-BA-F-SG-D16x4.5
SKU: GM16403
Stock: 3
Holding force: 18 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

13 mm Ferrite
PM-BA-F-SG-D13x4.5
SKU: GM16402
Stock: 30
Holding force: 10 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

10 mm Ferrite
PM-BA-F-SG-D10x4.5
SKU: GM16401
Stock: 0
Holding force: 4 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

32 mm Neodymium (NdFeB)
PM-BA-N-SG-D32x7
SKU: GM17408
Stock: 11
Holding force: 350 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

25 mm Neodymium (NdFeB)
PM-BA-N-SG-D25x7
SKU: GM17407
Stock: 0
Holding force: 200 N
Height: 7 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

20 mm Neodymium (NdFeB)
PM-BA-N-SG-D20x6
SKU: GM17406
Stock: 16
Holding force: 140 N
Height: 6 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

16 mm Neodymium (NdFeB)
PM-BA-N-SG-D16x4.5
SKU: GM17405
Stock: 8
Holding force: 95 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

13 mm Neodymium (NdFeB)
PM-BA-N-SG-D13x4.5
SKU: GM17404
Stock: 94
Holding force: 60 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

10 mm Neodymium (NdFeB)
PM-BA-N-SG-D10x4.5
SKU: GM17403
Stock: 70
Holding force: 25 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

8 mm Neodymium (NdFeB)
PM-BA-N-SG-D8x4.5
SKU: GM17402
Stock: 19
Holding force: 13 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

6 mm Neodymium (NdFeB)
PM-BA-N-SG-D6x4.5
SKU: GM17401
Stock: 15
Holding force: 5 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

0.5 mm 10 m
Y1270R100501SA
SKU: Y1270R100501SA
Stock: 0
Printing technique: UV ink, Eco solvent, Screen print
Self-adhesive: Yes (silicon layer)
Ferrous film is the ideal surface for magnets.It forms - in combination with magnetic sheet - the ideal base for in-store graphics and advertising, wall coverings, exhibition and stand construction, memoboard or presentation walls.Ferrous film - foil that contains iron or metal - is available with or without a printable layer, self-adhesive or not. Let us know your application and we will be happy to advise you of the possibilities.

Good to print
Suitable for advertising and promotion
Ideal as a basis for magnets
Suitable for graphics and in-store-retail

Application

What are the applications for ferrous film?

Ferrous film forms an ideal combination with magnets and magnetic sheet.
It is flexible and allows for easy trimming, cutting, plotting, or punching.
The metal foil has no sharp edges or corners and is safe to handle. It is applicable on both flat and curved surfaces. Ferrous film is water resistant but not waterproof. For indoor use.
As an optional extra, a special topcoat will make the ferrous film suitable for printing.
 
Applications: graphic prints and in-store communications, wall coverings, stand construction, magnetic advertising, and technical applications.

Composition

What is ferrous film made of?

Ferrous film is made of unmagnetized iron powder, composite rubber and other materials.
Our film is free of hazardous chemicals or heavy metals.
Rolling creates a thin flexible film. Ferrous film is standard dark brown in colour. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store ferrous film

Store ferrous film in closed packaging, horizontally at temperatures between 10 and 30 °C. Humidity between 30% and 60%. Keep ferrous film out of direct sunlight.
Shelf life is 12 months.
Process metal foil at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Apply metal foil only at a maximum daytime temperature changes of 40 °C.
Process material in opened packaging within 1 month.

FAQs

Metal foil FAQs

If you have a question, we’d be glad to answer it. E-mail or call one of our staff: +31 (0)40 221 3283.

0.5 mm 30 m
Y0620R300501
SKU: Y0620R300501
Stock: 0
Printing technique: Screen print, Eco solvent, UV ink
Self-adhesive: No
Ferrous film is the ideal surface for magnets.It forms - in combination with magnetic sheet - the ideal base for in-store graphics and advertising, wall coverings, exhibition and stand construction, memoboard or presentation walls.Ferrous film - foil that contains iron or metal - is available with or without a printable layer, self-adhesive or not. Let us know your application and we will be happy to advise you of the possibilities.

Good to print
Suitable for advertising and promotion
Ideal as a basis for magnets
Suitable for graphics and in-store-retail

Application

What are the applications for ferrous film?

Ferrous film forms an ideal combination with magnets and magnetic sheet.
It is flexible and allows for easy trimming, cutting, plotting, or punching.
The metal foil has no sharp edges or corners and is safe to handle. It is applicable on both flat and curved surfaces. Ferrous film is water resistant but not waterproof. For indoor use.
As an optional extra, a special topcoat will make the ferrous film suitable for printing.
 
Applications: graphic prints and in-store communications, wall coverings, stand construction, magnetic advertising, and technical applications.

Composition

What is ferrous film made of?

Ferrous film is made of unmagnetized iron powder, composite rubber and other materials.
Our film is free of hazardous chemicals or heavy metals.
Rolling creates a thin flexible film. Ferrous film is standard dark brown in colour. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store ferrous film

Store ferrous film in closed packaging, horizontally at temperatures between 10 and 30 °C. Humidity between 30% and 60%. Keep ferrous film out of direct sunlight.
Shelf life is 12 months.
Process metal foil at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Apply metal foil only at a maximum daytime temperature changes of 40 °C.
Process material in opened packaging within 1 month.

FAQs

Metal foil FAQs

If you have a question, we’d be glad to answer it. E-mail or call one of our staff: +31 (0)40 221 3283.

1 m 300 mm
NAI0300R0120PA
SKU: NAI0300R0120PA
Stock: 0
Thickness: 2 mm
Holding force: 5.5 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

2 m 300 mm
NAI0300R0115PA
SKU: NAI0300R0115PA
Stock: 0
Thickness: 1.5 mm
Holding force: 4 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

1 m 300 mm
NAI0300R0110PA
SKU: NAI0300R0110PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

5 m 25 mm
NAI0025R0510PA
SKU: NAI0025R0510PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

5 m 20 mm
NAI0020R0510PA
SKU: NAI0020R0510PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

5 m 15 mm
NAI0015R0510PA
SKU: NAI0015R0510PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

5 m 10 mm
NAI0010R0510PA
SKU: NAI0010R0510PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

0.6 mm 10 m
FII1000R100601P
SKU: FII1000R100601P
Stock: 0
Roll width: 1000 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

1 mm 10 m
FII1020R101001
SKU: FII1020R101001
Stock: 0
Roll width: 1020 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

1 mm 10 m
FII0620R101001
SKU: FII0620R101001
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

0.8 mm 10 m
FII0620R100801
SKU: FII0620R100801
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

0.6 mm 10 m
FII0620R100601
SKU: FII0620R100601
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

0.5 mm 10 m
FII0620R100501
SKU: FII0620R100501
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

150 mm White
TII0150R300601
SKU: TII0150R300601
Stock: 0
Thickness: 0.6 mm
Roll length: 30 m
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

125 mm White
TII0125R300601
SKU: TII0125R300601
Stock: 0
Thickness: 0.6 mm
Roll length: 30 m
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

100 mm White
TII0100R300601
SKU: TII0100R300601
Stock: 0
Thickness: 0.6 mm
Roll length: 30 m
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

75 mm White
TII0075R300601
SKU: TII0075R300601
Stock: 0
Thickness: 0.6 mm
Roll length: 30 m
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

50 mm White
TII0050R300601
SKU: TII0050R300601
Stock: 0
Thickness: 0.6 mm
Roll length: 30 m
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

Our paint-can with lid are made of tin, a material that offers high strength and stiffness during treatment. Once closed, retain these cans their liquid density, which is necessary for the preservation of paints and varnishes. Because of the English closure this packaging after opening also again good lockable.

Our paint-can with lid are made of tin, a material that offers high strength and stiffness during treatment.
Once closed, retain these cans their liquid density, which is necessary for the preservation of paints and varnishes.
Because of the English closure this packaging after opening also again good lockable

Our paint-can with lid are made of tin, a material that offers high strength and stiffness during treatment.
Once closed, retain these cans their liquid density, which is necessary for the preservation of paints and varnishes.
Because of the English closure this packaging after opening also again good lockable.

2K UV HS HARDENER two components product, has very high physical and chemical resistance.
Acrylic based clearcoat protects against scraching and UV rays and designed for a long lastingglow.

2K UV MS HARDENER, is a multi purpose hardener for clearcoats and last layers-filler, must be used as per the ratios indicated on user’s manual.
Slow, Standart and Fast Autobahnhof® 2K UV MS Hardener should be determined according to the current weather conditions and the size of the painting surface.

2K UV MS HARDENER, is a multi purpose hardener for clearcoats and last layers-filler, must be used as per the ratios indicated on user’s manual.
Slow, Standart and Fast Autobahnhof® 2K UV MS Hardener should be determined according to the current weather conditions and the size of the painting surface.

5 LT
2K MS CLEARCOAT EUROPEAN PRODUCTION two components product, has very high physical and chemical resistance.
Acrylic based clearcoat protects against scraching and UV rays and designed for a long lasting glow.