Round trapezoidal nut C35Pb Tr.20 x 4 single-start left length 30mm outer diameter 45mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.18 x 4 single-start left length 27mm outer diameter 40mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.16 x 4 single-start left length 24mm outer diameter 36mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.14 x 4 single-start left length 21mm outer diameter 30mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.12 x 3 single-start left length 18mm outer diameter 26mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.10 x 3 single-start left length 15mm outer diameter 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Ready-to-install flange nut Tr.60 x 9 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477060
Ready-to-install flange nut Tr.50 x 8 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477050
Ready-to-install flange nut Tr.40 x 7 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477040
Ready-to-install flange nut Tr.36 x 6 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477036
Ready-to-install flange nut Tr.30 x 6 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477030
Ready-to-install flange nut Tr.24 x 5 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477024
Ready-to-install flange nut Tr.20 x 4 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477020
Ready-to-install flange nut Tr.16 x 4 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477016
Round trapezoidal nut steel C35Pb Tr.70 x 10 single-start right length 105mm outer diameter 110mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.60 x 9 single-start right length 90mm outer diameter 100mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.52 x 8 single-start right length 78mm outer diameter 90mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.50 x 8 single-start right length 75mm outer diameter 90mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.48 x 8 single-start right length 72mm outer diameter 90mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.44 x 7 single-start right length 66mm outer diameter 80mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.40 x 7 single-start right length 60mm outer diameter 80mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.36 x 6 single-start right length 54mm outer diameter 75mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.32 x 6 single-start right length 48mm outer diameter 60mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.30 x 6 single-start right length 45mm outer diameter 60mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.