NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The R199 is our best-performing in-hull transducer. The large, narrow-beam, 200 kHz element supplies such incredible target detail that fishermen can discriminate between a single fish and bait at any depth. The 50 kHz array provides unparalleled deep-water performance and precise image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.

Manufacturer Part Numbers
Furuno NC—CA50/200TID-R199 W/TANK——Airmar—41-285-1-01
Garmin—010-10643-00——Airmar—41-255-1-01
Raymarine—E66076——Airmar—41-286-1-01

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Airmar has taken the SS270W, thru-hull and split it into a pair of Tilted Element™ transducers. One transducer handles 50 kHz while the other operates at 200 kHz. Now you can get all of the performance of the SS270W without a fairing. The low-profile design is perfect for fast, trailered, tournament, and sport-fishing boats—especially center consoles.

This transducer pair gives you four times the beamwidth at 200 kHz than other high-performing transducers. Since the width of the beams are the same at both frequencies, a split-screen fishfinder display will clearly show the same water column and bottom coverage. Fish may also appear as arches. More fish will be marked while cruising, trolling, drifting or at anchor. Get the wider picture on your sounder with the SS264W pair.

Tuna/Marlin Fishermen—Detect bait and gamefish in the upper-water column that would go unseen with a traditional narrow-beam transducer.

Downrigger Fishermen—Have the ability to see your downrigger ball and the lines attached to it. Get a closer look at a fish strike on your echo sounder screen.

Jig Fishermen—Seeing your jigs on the echo sounder screen while bottom fishing can help avoid bottom hang-ups. Seeing a tuna attack your jigs on the echo sounder display lets you reel up loose lines before it is too late.

The SS175W is available in three Tilted Element models:

Fixed 20° tilted version for 16° to 24° hull deadrise
Fixed 12° tilted version for 8° to 15° hull deadrise
Fixed 0° tilted version for 0° to 7° hull deadrise

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The SS270W, 1 kW, twin is now available as atransom-mount for larger, trailered boats with outboards andI/O’s. The TM270W’s rugged mounting bracket has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH).

See the wider picture! With the TM270W you will get four times the beamwidth at 200 kHzthan with other high-performance transducers. Since the widthof the beams are the same at both frequencies, a split-screen,fishfinder display will clearly show the same water column and bottom coverage. Fish will appear as arches. More fish willbe marked while cruising, trolling, drifting, or at anchor.

Tuna/Marlin Fishermen—Detect bait and gamefish in theupper water column that would go unseen with a traditionalnarrow-beam transducer.
Downrigger Fishermen—Have the ability to see yourdownrigger ball and the lines attached to it. Get a closer lookat a fish strike on your echosounder screen.
Jig Fishermen—Seeing your jigs on the echosounder screen while bottom fishing can help avoid bottom hang-ups. Seeinga tuna attack your jigs on the echosounder display lets you reel up loose lines before it is too late.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The CM270W is designed for tank mounting in commercial fishing vessels. It's versatile design also allows it to be flush mounted in the keel of larger sportfishing vessels. This transducer is the wide beam brother of the CM260 narrow beam, having wide 25° beams at both 50 & 200 kHz.Aimed at the commercial and sport-fishing markets, the CM270Wprovides four times the beamwidth at 200 kHz thanother high-performance transducers. This meansmarking game fish or bait in a larger area, thus increasingthe catch.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The versatile SS216 is primarily used for navigation. It features an economical, 40 kHz array that has good, bottom detection for navigation echosounders. The high-performance, 38 kHz array features excellent performance in both shallow and deep-water for navigation applications. The high-definition, 100 kHz version has narrow beamwidth for excellent, bottom detail especially suited to survey applications.

Applications
Harsh environments
Navigation and survey

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The SS270W’s extra wide coverage delivered to a dual-frequency, split-screen sounder gives fishermen a wider view of what is going on under the boat. The SS270W gives you four times the beamwidth at 200 kHz than other 1 kW, high-performance transducers. Since the beams are the same at both frequencies, a split-screen fishfinder display will clearly show the same water column and bottom coverage. Fish may also appear as arches. More fish will be marked while cruising, trolling, drifting, or at anchor.

Tuna/Marlin Fishermen—Detect bait and gamefish in the upper-water column that would go unseen with a traditional narrow-beam transducer.
Downrigger Fishermen—Track your downrigger balls and lures on the screen at both frequencies. This allows you to adjust the downrigger settings to maximize the lure or bait presentation at a desired depth.
Jig Fishermen—Seeing your jigs descend on the echosounder screen while bottom fishing can help avoid bottom hang-ups when fishing in heavy currents. Seeing a tuna attack your jigs on the echosounder display lets you reel up other loose lines before tangles can occur.

The SS270W’s custom-fit high-performance fairing will give crystal-clear imaging at speeds up to 30 knots (34 MPH). And since the SS270W fits into the popular B260 fairing pocket, it’s easy to upgrade existing installations. Possibilities expand with the SS270W Transducer

Applications
Blue-water trolling using both 50 kHz and 200 kHz
Bait and game fish marking in shallow to mid-water
Wreck and structure finding on the continental shelf
Vertical deep jigging
Downrigger fishing in saltwater or deep-water lakes

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Airmar’s Broadband R309 is different from its twin brother the R209, because it operates at a lower frequency range between 25 kHz to 45 kHz. (The high-frequency range of 130 kHz to 210 kHz is the same in both models.) The R309’s frequency agility allows you to change its beamwidth and depth capabilities. The narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. The wider low-frequency beam will not only give deep-water bottom detail, but will also show you more of what is around your vessel—including bait which may attract game fish. This powerhouse is best suited for offshore sport and commercial fishing vessels—giving 2 kW to 3 kW echosounders extreme deep-water bottom detail and target discrimination. Survey vessels can also use the R309 for bottom profiling and sea-mount tracking.

Applications
Offshore and long-range blue-water fishing
Commercial fishing
Deep-water canyon and sea-mount tracking

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Meet the Biggest and Baddest! Want to increase your catch? Want to detect ground fish holding tight to the bottom in deep water? Want to mark bait fish as closely-spaced, individual fish? Then Airmar’s R209 is the answer. Airmar’s R209 can operate at ANY frequency between 33 kHz to 60 kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R209's beamwidth and depth capabilities. For example, if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you what is around your vessel—including bait which may attract game fish. With the R209, you choose the frequency for your fishing.

Manufacturer Part Numbers
Furuno NC—R209TIDN——Airmar—41-310-1-01
Raymarine—A102114——Airmar—41-308-1-01

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Unparalleled Deep-Water Fishing
The R158 holds 34, 50 kHz elements and can handle up to 4 kW of power. The high power level and highly efficient arrays allow unparalleled, deep-water, fish detection.

Applications
Mid-size and large, commercial-fishing vessels

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Airmar’s 2 kW R155 features a highly efficient and highly-sensitive, 50 kHz array to provide exceptional deep-water performance at a competitive price. The dual-frequency R155 model has the popular 50 kHz and 200 kHz fishfinding frequencies in a compact, cost-effective housing.

Applications
Commercial fishing vessels

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The P48W transom-mount is designed for tournament–circuit freshwater-bass fishermen. The 38° beam will mark more fish, giving you that tournament winning edge. See things in wide-screen on your fishfinder like a bass attacking your spinner bait as you quickly reel it back to the boat. The highly-sensitive 200 kHz ceramic—the heart of the P48—can easily show changes in bottom composition which help locate spawning beds where defensive bass might be lurking.

The P48’s innovative design allows you to change the transducer beam direction on the fly based on specific fishing conditions. When the beam is in the default port-starboard position, a wide 38° x 12° beam will mark more fish and bait to the port and starboard of the boat. Turn the beam to the bow-stern position, and the 12° x 38° beam will detect changes in bottom composition as you search along rocky bottom, sandy bottom, or weed beds in search for that ten pounder. Widen the possibilities of both your fishfinder and a tournament win with the P48W.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The PB200 WeatherStation® Instrument informs you of instantaneous changes in the weather. Wind Speed and Direction are measured using four ultrasonic transducers; no moving parts make it durable and reliable. The internal, WAAS GPS engine and three-axis solid-state compass provide both Apparent and True Wind Speed and Direction without the need to tack on additional sensors. Also, the WAAS GPS generates navigation data as well as magnetic variation and is suitable as your primary GPS source. The internal temperature and barometric pressure sensors help predict changing weather patterns. Combined with the internal heading sensor, all of your navigation needs are there! No other instrument on the market incorporates all of these sensors in one compact housing.

What sets our data apart from the competition is the 2° heading accuracy under dynamic conditions such as rough seas. Airmar's unique dynamic-motion-correction software is the key. The PB200's heading is highly accurate and stable under most sea conditions, even if the vessel is pitching and rolling up to 30°. Also unique to the PB200 is that the 3D accelerometer and rate gyro are temperature compensated, resulting in precise tilt and rate-of-turn data. This allows the PB200 to accurately measure True Wind Speed and Direction even when tilted up to 30°.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The enhanced PB150 Ultrasonic WeatherStation® Instrument features higher-accuracy temperature readings and improved wind speed and direction accuracy. WeatherCaster™ PC Software version 2.0 puts your own personal weatherman on-board the boat, 24 hours a day. The easy-to-use program has multiple screen views and advanced setup features to customize what you want to see. No Computer on board—no problem, just connect the PB150 to a NMEA 0183 display* for up-to-the-minute weather information. Before Leaving the Dock—Decide if you want to spend your day on the water. Anticipate weather fronts by checking the wind speed and direction, temperature, and barometric pressure. Check the weather history graphs, as the WeatherCaster™ Software can store readings for up to 72 hours. Underway—Monitor up-to-the-minute weather conditions at your location. See where and when the fish will bite best based on wind conditions and a rising or falling barometer. Docking—The on-board PC or chart plotter can display true wind data to make docking a vessel in high wind a breeze.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The LB150, Ultrasonic WeatherStation® Instrument meets a growing need for real-time, site-specific, weather information. It is the only ALL-in-ONE weather sensor that calculates apparent wind speed and direction, barometric pressure, air temperature, relative humidity, dew point, and wind chill temperature. With the internal compass and WAAS/EGNOS GPS, true wind speed and direction can also be calculated. Accurate data helps organizations make important decisions regarding weather conditions that affect safety and operations.

Traditional weather instrumentation is composed of several individual sensors including wind cups, which are prone to breaking and are less accurate at low speeds. Airmar’s WeatherStation® Instrument incorporates seven sensors, with no moving parts, all in one compact unit. The UV stabilized, housing is fully waterproof and resistant to chemicals.

The WeatherStation® Instrument comes with our intuitive WeatherCaster™ Software. Data can be viewed in both digital and analog formats and can be saved for a set period of time. The log time can be adjusted in intervals from 6 to 72 hours. Standard NMEA sentences and an RS-422 standard interface allows for the flexibility of designing your own software program to fit your specific application. Our comprehensive technical manual makes the job easy!

Airmar’s WeatherStation® Instrument has a standard 1-14” UNS (3/4” NPT) thread connection to accommodate standard mounting hardware. The waterproof base connector assures trouble-free installation and servicing, while a quick disconnect feature allows for easy removal. Using the standard cable lengths of 10 m or 15 m (33' or 49'), the sensor can be connected to the optional USB Converter. The Converter allows the WeatherStation® Instrument measurements to be displayed on a PC by changing the data from RS-422 standard or NMEA 0183 to USB.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The 100WX offers a truly best-in-class solution at a better price than any other weather monitoring system on the market today.

Reliability and superior accuracy, along with no moving parts and plug and play installation, makes the 100WX an easy and affordable choice for any weather solution. The Airmar WX WeatherStation® instruments are unique, as they are the only weather monitoring system to offer true and apparent wind speed and direction in one compact housing—without the need for additional sensors. Ideal for stationary applications, the 100WX model offers apparent wind speed and direction, air temperature, and barometric pressure readings.

The many new benefits of the WX Series include:

Removable humidity sensor that is field serviceable
IPX6 waterproof rating (units with the relative humidity module are IPX4 waterproof rated)
New power supply featuring a 50% reduction in current draw for use in remote locations that use solar or battery power
Wider operating voltage range of 9-40 VDC
Adjustable, unfiltered wind data for monitoring maximum gust conditions
Output via a single cable (various lengths available) for power and either RS232 (NMEA 0183) or RS-422 standard (NMEA 0183) and CAN bus (NMEA 2000®) data interface
WeatherCaster™ PC software for viewing and customizing data sentences

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Combine the fish-finding power of an Airmar transducer with the viewing capability of the Airmar CA500 Camera and get the ultimate underwater observation system. This thru-hull camera will display what is directly below the boat, making it an ideal underwater fishing camera or video surveillance / safety system. Simply connect the single cable to any display with a PAL or NTSC input and spy on the underwater world. We have combined the industry renowned Airmar housings with one of the lowest Lux (0.01) cameras available today—all protected by a sapphire viewing window that resists scratching or cracking. The retractable housing with valve is available in plastic, bronze, or stainless steel and allows for easy servicing and cleaning of the camera while the boat is in the water. See what you have been missing with the Airmar CA500 Underwater Camera.

Manufacturer Part Numbers
Raymarine—A62300——Airmar—44-122-1-04

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Our high-precision has been redesigned with a 26 mm (1") bronze button on the face for a quick, 15 second thermal time constant and is now accurate to ± 0.3ºC. Precision temperature data is output to a fishfinder, chart-plotter, digital display, or computer. The unit is ideal for sport and commercial fishing as it can detect thermal boundaries such as the edges of gulf stream currents.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Airmar has now made it possible for saltwater fishermen to “widen up” the high-frequency, 200 kHz performance for most of today’s popular fishfinders. The SB264 connects your existing, 1 kW, Airmar transducer and a newly-installed SS264W for wide and narrow-beam selection at your fingertips. The switchbox works with most of Airmar’s 1 kW transducers including the B260, M260, B258, and B256 found on boats from center consoles to large, sportfishing vessels.

Installers can leave any of these models in place and mount an additional SS264W Tilted Element™ transducer, then wire both into the SB264. The waterproof panel-mount switch is easily installed and takes minimal space. This lets the operator toggle between 200 kHz wide (25°) or narrow-beam (6°) fish finding, together with the 50 kHz low-frequency operation.

Traditionally at 200 kHz, most transducers have a narrowly focused beam in which fish swimming near the boat can go un-marked because they are outside of the transducer beam. At 50 kHz, the beam is wider, thus marking more fish, but resolution and detail are not as crisp. Tightly-spaced fish tend to appear on the fishfinder screen as one large target or “blob". The SS264W, 200 kHz, transducer provides the coverage and resolution needed so that fishermen do not miss any fish or bait lurking close to the boat. Additionally with the, tightly-spaced fish appear on the fishfinder screen more as individual targets and as arches.

Wide-beam, 200 kHz operation is great when trolling or searching for fish in the mid to upper portion of the water column. This makes it ideal for tuna and marlin fishing. Switching to a more traditional, narrow-beam, 200 kHz operation works best when bottom fishing for cod or grouper in waters up to 122 m (400'), providing optimal bottom detail and separation between the bottom and tightly-spaced fish targets. A narrow and wide beam, 200 kHz combination on the boat caters to the versatile fisherman who may be bottom fishing with a narrow beam in the morning and tuna or marlin fishing with the SS264W, 200 kHz by afternoon.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

This switchbox can be used to switch between two fishfinder transducers connected to one sounder, so that you can select the transducer that is appropriate for different fishing conditions. It comes with a panel-mount waterproof switch. The SB260 can be used with any two of the current range of 1kW fishfinder transducers from Airmar. It will work with certain newer 600W models - contact us with information on the transducers you want to switch. The SB260 can also be used with one fishfinder transducer and two sounders, to feed the transducer signal to either one sounder or the other.

NOTE: THIS PRODUCT HAS BEEN REPLACED BY UST800 SMART™ SENSOR OR DX900+ MULTILOG SMART™ ELECTROMAGNETIC SENSOR

Airmar’s revolutionary CS4500 makes cutting-edge speed sensing affordable. Instead of a paddlewheel, it uses two transducers mounted in one compact housing to detect particles in the water and calculates speed based on their distance apart. The CS4500 reacts instantaneously to changes in boat speed and is one of the most reliable and accurate speed sensors on the market.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

Airmar’s R299 is radically different. Why? Because it operates at ANY frequency between 33 kHz to 60 kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R299's Beamwidth and depth capabilities. For example, if you are bottom fishing in 61 m (200') of water, the narrow high-frequency beam will display extreme bottom detail and fish holding tight to structure. If you are tuna or marlin fishing in deep blue water, the wider, low-frequency beam will not only give deep-water bottom detail, but more importantly show you what is around your vessel—including bait which may attract game fish. Widen the band and increase the catch with the R299.

Because the R299 has a bandwidth that covers a continuous frequency spectrum, next generation fish finders can be made “tunable”, so fishermen can “dial-in” the best frequency for the target-fish species or conditions.

Manufacturer Part Numbers
Furuno NC—R299ID-IHN——Airmar—41-311-1-01
Raymarine—A102115——41-309-1-01

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The R99 is our high-performance external-mount transducer. The large, narrow beam, 200 kHz, element gives incredible target detail and allows fishermen to discriminate between a single fish target and bait at any depth range. The 50 kHz array provides unparalleled deep-water performance and precise image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.

Manufacturer Part Numbers
Furuno NC—CA50/200TID-R99 W/FB——Airmar—41-284-1-01
Garmin—010-10642-00——Airmar—41-235-1-01
Raymarine—E66075——Airmar—41-287-1-01

1 kW

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The performance of Airmar’s "1 kW 260 family" of transducers has made them legendary. The combination of power and sensitivity has made this the high performance transducer of choice for use with conventional fishfinders. Operating at 50 kHz and 200 kHz, the narrow 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz provides excellent deep water detection and the wide 19° beam provides broad coverage under the boat.

The CM260 is designed for tank mounting in commercial fishing vessels. Its versatile design also allows it to be flush mounted in the keel.

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The B22 and P19 have been the standard in low-profile models for many years. Their large, sensitive ceramics allow deep echosounding up to 206 m (700'). These nearly flush units minimize drag as only 5 mm (2/10") of the housing extends outside of the hull.