Male branch tee, R 1/2 o., Pipe exterior Ø 16 mm, PN max. 400 bar, a/f1 30, a/f2 24, galvanised steel
Male branch tee, conical male thread acc. to ISO 7-1, heavy type
Male branch tee, R 3/8 o., Pipe exterior Ø 10 mm, PN max. 630 bar, a/f1 22, a/f2 17, galvanised steel
Male branch tee, conical male thread acc. to ISO 7-1, heavy type
Straight screw-in fitting, Soft seal, G 1/2, Pipe exterior Ø 15 mm, PN max. 315 bar, Stainless steel 1.4571
Version with parallel thread and soft seal made of NBR.
Hollow screw with PTFE sealing ring, Single, G 3/8, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Straight screw-in fitting, G 3/4 o., Pipe exterior Ø 25 mm, PN bar 400, A/F1 46, A/F2 41, galvanised steel
Male connector, parallel male thread, heavy type
Straight screw-in fitting, ET conical, R 3/8, for hose 10/8 mm, AF 16/17, Pressure max. 25 bar, Stainless steel 1.4404
Supplied without seals. For use with corrosive media and at high temperatures.
Screw fitting series made of stainless steel for all applications where compliance with strict tightness, pressure and temperature requirements is essential.
The parts are manufactured without rubber seals, in other words they are ideal for very high temperatures or for use with corrosive liquids, e.g. in cases when FPM is no longer suitable.
Throttle check valve »Blue Series«, Discharge throttle, R 1/4 o., for hose exterior Ø 12 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Throttle check valve »Blue Series«, Supply air throttle, R 1/4 o., for hose exterior Ø 12 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Straight push-in fitting »metallica«, G 1/2 o., for hose exterior Ø 16 mm, Working pressure max. 16 bar, nickel-plated brass
Push-in fittings, manufactured entirely in nickel-plated brass.
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).
3/2-way valve »Blue Series«, Plug connector, R 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, R 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, G 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, G 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, R 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, R 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
3/2-way valve »Blue Series«, Plug connector, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Straight push-in fitting, Exterior hexagonal, R 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar, Stainless steel
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
3/2-way valve »Blue Series«, R 1/2 o., R 3/8 o., with thread coating, Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Lubricant, for mounting cutting ring fittings with steel and stainless steel pipes, Tube 100g, Silicone free, Food-safe
For assembling bite-type tube fittings with steel or stainless steel pipes.
Significantly reduced torques.
No thread seizure: cold welding of stainless steel threads is ruled out.
Silicone-free, food grade.
Straight screw-in fitting, Soft seal, G 3/8, Pipe exterior Ø 15 mm, PN max. 315 bar, Stainless steel 1.4571
Version with parallel thread and soft seal made of NBR.
Throttle check valve »Blue Series«, Straight, R 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Throttle check valve »Blue Series«, Straight, R 1/2 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Pre-assembly supports for stainless steel cutting ring fitting, M10x1, Pipe exterior Ø 6 mm, AF 10, PN max. 100 bar
When stainless steel pipes are assembled, they must always be pre-assembled in a hardened pre-assembly adapter. They must never be assembled directly in the stainless steel adapter. The cones of the pre-assembly adapters are susceptible to wear and must therefore be inspected at regular intervals to check that they are still true to gauge.
We recommend using only seamless, soft-annealed, stainless steel pipes made of
1.4571 according to DIN 2391 Part 1 or DIN 2462, tolerance class D4/T3.
Pre-assembly supports for stainless steel cutting ring fitting, M8x1, Pipe exterior Ø 4 mm, AF 10, PN max. 100 bar
When stainless steel pipes are assembled, they must always be pre-assembled in a hardened pre-assembly adapter. They must never be assembled directly in the stainless steel adapter. The cones of the pre-assembly adapters are susceptible to wear and must therefore be inspected at regular intervals to check that they are still true to gauge.
We recommend using only seamless, soft-annealed, stainless steel pipes made of
1.4571 according to DIN 2391 Part 1 or DIN 2462, tolerance class D4/T3.
Blocking valve »Blue Series«, Plug connector, G 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Throttle check valve »Blue Series«, Discharge throttle, R 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Push-in L-fitting, rotating, G 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.
Angled screw-in fitting G 1/8 o., for hose 4/10 mm, Working pressure max. 10 bar (20 °C)/max. 1 bar (170 °C), PFA
Perfluoroalkoxy alkane (PFA): A fluoroplastic with the same chemical resistance as PTFE but much stronger and suitable for temperatures up to 200°C.