Locknut KMT 19 M95x2
Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can laso be adjusted. Slotnut-design. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw
Article ID: 65358019

Locknut KMT 18 M90x2
Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can laso be adjusted. Slotnut-design. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw
Article ID: 65358018

Locknut KMT 17 M85x2
Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can laso be adjusted. Slotnut-design. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw
Article ID: 65358017

Locknut KMT 16 M80x2
Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can laso be adjusted. Slotnut-design. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw
Article ID: 65358016

Locknut UW with integral locking device M100x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399499

Locknut UW with integral locking device M95x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399495

Locknut UW with integral locking device M90x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399490

Locknut UW with integral locking device M85x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399485

Locknut UW with integral locking device M80x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399480

Locknut UW with integral locking device M75x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399475

Locknut UW with integral locking device M70x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399473

Locknut UW with integral locking device M65x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399472

Locknut UW with integral locking device M60x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399471

Locknut UW with integral locking device M55x2 stainless steel 1.4301
Material: Body of the nut: Stainless steel 1.4301.

Locking insert: Stainless Steel.

With these slot nuts no additional lock washers or keyways are required.
No keyway or washer required for roller bearing. Designed for easy
assembly. Maintenance-free construction. The bolt thread has to meet the
medium quality of ISO 965. Please note: Ensure that there are at least
two or three full threads behind the locking insert. This slot nut must
not be used on shafts with keyway. Lubricate the nut when screwing it
onto the shaft. Larger thread diameters can be supplied on request.
Function: This system consists of a shaft nut and a special
spring, acting as friction ring. This special spring is integrated into
the upper part of the nut. Due to the lead of the thread the special
spring locks itself between shaft and nut. The
system is locked in any position!
Article ID: 65399468