Interface/connection dim's : DN100 acc. EN 1092-1 PN16
SFN-100-IF-07E-HT-F1m-S-B-B
SKU: SSFN010038
Stock *: 0
Magnet quality: Neodymium GSN-42SH, Br 13,300 gauss (at 20 °C), Tmax. 150 °C
No of bars: 7
Build-in length: 300 mm
Robust filter for general industrial applications without risk of bacterial growth.For magnetic filtering of fine ferrous contaminants - such as stainless steel wear particles - from your liquid and powder flows in pressure pipes up to 10 bar.Manual quick-cleaning. The largest versions are additionally equipped with a removal guide, so that the magnet unit does not have to be lifted out, but can be extended.

Manual quick cleaning
Capture Fe particles from 30 µm - 2 mm
Sizes DN50-200
Max. 10 bar / 140 °C
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)

Application

Liquids and powders in pressure lines

This robust magnetic filter is suitable for industrial applications where liquid mixtures and powders are transported in pressure pipes up to 10 bar.
 
The design and finish are industrial, meaning they are only intended for use in applications with no risk of bacterial growth.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
The industrial magnetic filter is a very robustly built filter, with EN 1092-1 PN16 flat flanges.
 
Equipped with extractor bars Ø25/Ø23 mm for manual 'quick cleaning'. See explanation in tab 'Working principle'.
 
Summary of important specifications

Magnetic bars Ø23/Ø25 mm
Magnet quality N-42SH, 8,000 gauss on tube Ø25 mm
Max. 10 bar / 140 °C
Inlet/outlet: DN50 - D200 (EN1092-1)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available versions, options & accessories

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Types

DN50 to DN-125: can be cleaned by manually taking the magnet unit out.
DN100-150-200: can be cleaned by sliding the entire magnet unit out over the guide and then pulling it apart.
These types are easier and faster to clean. But also more durable, because the magnet unit remains on the separator, and therefore less likely gets damaged.


Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic unit with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous impurities passes several magnetic bars while flowing through the filter.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.
 
For larger passages, the cleaning is done by manually sliding the magnet unit out over guides, because these magnet units are too heavy to lift.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet unit
Lift / slide the complete magnet unit out of the housing
Take / slide the magnet unit out of the extractor unit
Small types: and place it away from the extractor unit on a clean surface. 
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Place / shove the complete magnet unit assembly back into the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN100 acc. EN 1092-1 PN16
SFN-100-IF-02O-N-F1m-S-B-B
SKU: SZFN001560
Stock *: 0
Capacity: 25 m³/h (at 1m/s)
Build-in length: 360 mm
Weight: 74 kg
Very robust filter, suitable for filtering large ferrous contaminants of 1-50 mm out of coarse or high-capacity product flows under pressure, such as pulp in the paper industry. The magnets are placed on the outside of the product channel. Therefore the passage is completely free, enabling large parts to pass unobstructed.

Manual cleaning (wipe off)
Capture Fe particles from 1 - 50 mm
Flanges DN100-250 (EN 1092-1)
Max. 10 bar / 60 °C
Plate magnets on side (6,000 gauss)

Application

High-capacity & coarse product flows

This very robust magnetic filter is designed especially for larger capacities and coarser product flows.
 
An example of a common application is pulp in the paper industry.
 
Because the magnets are located outside the product stream, this filter permits better flow than filters with magnetic bars.
 
However, the magnetic contact is less, so that only larger ferrous particles will be filtered out.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
This industrial magnetic filter is equipped with plate magnets, placed on the sides of the product channel. This permits a better flow than filters with magnetic bars, because they are placed in the middle of the product flow.

2 Plate magnets outside product channel
Magnet quality N-35, 6,000 gauss on the magnet contact surface
Max. 10 bar / 60 °C
Inlet/outlet DN100 - 250 (EN 1092-1 PN16)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
2 strong neodymium plate magnets are positioned on the sides of the product channel. Here they attract passing ferromagnetic contaminants. The captured ferrous particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
After the product stream is stopped, you swing the magnets outwards. Now wipe them clean by hand.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet units
Swing the magnet units outwards as far as possible
Wipe clean the magnet with a soft cloth and - if necessary - a suitable cleaning fluid
Swing the magnet units back against the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN80 acc. EN 1092-1 PN16
SFN-080-IF-07E-HT-F1m-S-B-B
SKU: SSFN008038
Stock *: 0
No of bars: 7
Build-in length: 297 mm
Weight: 21 kg
Robust filter for general industrial applications without risk of bacterial growth.For magnetic filtering of fine ferrous contaminants - such as stainless steel wear particles - from your liquid and powder flows in pressure pipes up to 10 bar.Manual quick-cleaning. The largest versions are additionally equipped with a removal guide, so that the magnet unit does not have to be lifted out, but can be extended.

Manual quick cleaning
Capture Fe particles from 30 µm - 2 mm
Sizes DN50-200
Max. 10 bar / 140 °C
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)

Application

Liquids and powders in pressure lines

This robust magnetic filter is suitable for industrial applications where liquid mixtures and powders are transported in pressure pipes up to 10 bar.
 
The design and finish are industrial, meaning they are only intended for use in applications with no risk of bacterial growth.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
The industrial magnetic filter is a very robustly built filter, with EN 1092-1 PN16 flat flanges.
 
Equipped with extractor bars Ø25/Ø23 mm for manual 'quick cleaning'. See explanation in tab 'Working principle'.
 
Summary of important specifications

Magnetic bars Ø23/Ø25 mm
Magnet quality N-42SH, 8,000 gauss on tube Ø25 mm
Max. 10 bar / 140 °C
Inlet/outlet: DN50 - D200 (EN1092-1)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available versions, options & accessories

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Types

DN50 to DN-125: can be cleaned by manually taking the magnet unit out.
DN100-150-200: can be cleaned by sliding the entire magnet unit out over the guide and then pulling it apart.
These types are easier and faster to clean. But also more durable, because the magnet unit remains on the separator, and therefore less likely gets damaged.


Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic unit with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous impurities passes several magnetic bars while flowing through the filter.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.
 
For larger passages, the cleaning is done by manually sliding the magnet unit out over guides, because these magnet units are too heavy to lift.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet unit
Lift / slide the complete magnet unit out of the housing
Take / slide the magnet unit out of the extractor unit
Small types: and place it away from the extractor unit on a clean surface. 
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Place / shove the complete magnet unit assembly back into the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN65 acc. EN 1092-1 PN16
SFN-065-IF-04E-HT-F1m-S-B-B
SKU: SSFN006538
Stock *: 0
No of bars: 4
Build-in length: 228 mm
Weight: 13 kg
Robust filter for general industrial applications without risk of bacterial growth.For magnetic filtering of fine ferrous contaminants - such as stainless steel wear particles - from your liquid and powder flows in pressure pipes up to 10 bar.Manual quick-cleaning. The largest versions are additionally equipped with a removal guide, so that the magnet unit does not have to be lifted out, but can be extended.

Manual quick cleaning
Capture Fe particles from 30 µm - 2 mm
Sizes DN50-200
Max. 10 bar / 140 °C
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)

Application

Liquids and powders in pressure lines

This robust magnetic filter is suitable for industrial applications where liquid mixtures and powders are transported in pressure pipes up to 10 bar.
 
The design and finish are industrial, meaning they are only intended for use in applications with no risk of bacterial growth.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
The industrial magnetic filter is a very robustly built filter, with EN 1092-1 PN16 flat flanges.
 
Equipped with extractor bars Ø25/Ø23 mm for manual 'quick cleaning'. See explanation in tab 'Working principle'.
 
Summary of important specifications

Magnetic bars Ø23/Ø25 mm
Magnet quality N-42SH, 8,000 gauss on tube Ø25 mm
Max. 10 bar / 140 °C
Inlet/outlet: DN50 - D200 (EN1092-1)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available versions, options & accessories

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Types

DN50 to DN-125: can be cleaned by manually taking the magnet unit out.
DN100-150-200: can be cleaned by sliding the entire magnet unit out over the guide and then pulling it apart.
These types are easier and faster to clean. But also more durable, because the magnet unit remains on the separator, and therefore less likely gets damaged.


Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic unit with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous impurities passes several magnetic bars while flowing through the filter.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.
 
For larger passages, the cleaning is done by manually sliding the magnet unit out over guides, because these magnet units are too heavy to lift.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet unit
Lift / slide the complete magnet unit out of the housing
Take / slide the magnet unit out of the extractor unit
Small types: and place it away from the extractor unit on a clean surface. 
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Place / shove the complete magnet unit assembly back into the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN50 acc. EN 1092-1 PN16
SFN-050-IF-04E-HT-F1m-S-B-B
SKU: SSFN005038
Stock *: 0
No of bars: 4
Build-in length: 230 mm
Weight: 13 kg
Robust filter for general industrial applications without risk of bacterial growth.For magnetic filtering of fine ferrous contaminants - such as stainless steel wear particles - from your liquid and powder flows in pressure pipes up to 10 bar.Manual quick-cleaning. The largest versions are additionally equipped with a removal guide, so that the magnet unit does not have to be lifted out, but can be extended.

Manual quick cleaning
Capture Fe particles from 30 µm - 2 mm
Sizes DN50-200
Max. 10 bar / 140 °C
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)

Application

Liquids and powders in pressure lines

This robust magnetic filter is suitable for industrial applications where liquid mixtures and powders are transported in pressure pipes up to 10 bar.
 
The design and finish are industrial, meaning they are only intended for use in applications with no risk of bacterial growth.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
The industrial magnetic filter is a very robustly built filter, with EN 1092-1 PN16 flat flanges.
 
Equipped with extractor bars Ø25/Ø23 mm for manual 'quick cleaning'. See explanation in tab 'Working principle'.
 
Summary of important specifications

Magnetic bars Ø23/Ø25 mm
Magnet quality N-42SH, 8,000 gauss on tube Ø25 mm
Max. 10 bar / 140 °C
Inlet/outlet: DN50 - D200 (EN1092-1)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available versions, options & accessories

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Types

DN50 to DN-125: can be cleaned by manually taking the magnet unit out.
DN100-150-200: can be cleaned by sliding the entire magnet unit out over the guide and then pulling it apart.
These types are easier and faster to clean. But also more durable, because the magnet unit remains on the separator, and therefore less likely gets damaged.


Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic unit with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous impurities passes several magnetic bars while flowing through the filter.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.
 
For larger passages, the cleaning is done by manually sliding the magnet unit out over guides, because these magnet units are too heavy to lift.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet unit
Lift / slide the complete magnet unit out of the housing
Take / slide the magnet unit out of the extractor unit
Small types: and place it away from the extractor unit on a clean surface. 
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Place / shove the complete magnet unit assembly back into the housing
Re-tighten the screw connections
Restart the product flow

Product inlet size : 400 mm
SETK-lenastar
SKU: E_dummy
Stock: 0
Hygienic: Yes
Separate particles: Fe particles > 0.2µm, Weakly magnetic particles > 0.1 mm
These 'LenaStar' pharma drum magnets have a 12,000 gauss strong neodymium magnet drum. They remove ferromagnetic particles from 0.20 µm and weak magnetic particles from 0.1 mm from your raw materials during the production process. No production stop needed.The LenaStar is very hygienically executed. Smoothly polished, sloping surfaces, dismountable parts, water-resistant, product fabric does not adhere to the surface.

Capture weakly magnetic particles from 0.1 mm
Capture Fe particles from 0.2 µm
Max. particle size 10 mm
In stainless steel enclosure
Neodymium magnet (12,000 gauss at shell)

Application

Removal of weakly- and paramagnetic contaminants

The 'LenaStar' pharma type drum magnets in housing can be used in free-fall pipelines, or after a vibrating chute. Due to their extremely strong magnetic drum of 12,000 gauss, they remove the smallest ferromagnetic, or even weakly magnetic and paramagnetic contaminants.
 
For removal of weakly and paramagnetic particles, it is essential that you feed the material in a single layer, through a vibratory chute. You can then remove stainless steel wear particles, or paramagnetic particles from powder-dried raw materials, among others.
 
Metal separation
The LenaStar is a very advanced magnetic separation system, developed and produced by Goudsmit in collaboration with a Japanese partner. This advanced system removes ferromagnetic and paramagnetic metal particles from food ingredients and additives, chemicals and pigments. It can also remove stones, mud and insect excrement from dried granular products such as vegetables, fruits, soups, seeds, pasta, spices, nuts or tea. The paramagnetic properties of many soil types are the cause of the insect excrements - which mainly end up in herbs and tea - becoming magnetic.
 
Only this super strong LenaStar drum magnet is capable of demonstrating that food products are contaminated with undesirable particles of this type that the consumer ingests unknowingly.
 
Quality requirements
The stringent quality requirements in Japan make it necessary for companies there to adhere to the highest standards in precision detection. More than 50 leading producers of food products for the Japanese market (including Fuji Foods, Nissin Foods, House Foods Corporation (one of the largest spice producers in Japan), Twinnings, Unilever and Kellog's) have already chosen the LenaStar. This high Japanese quality standard is magnetic separator is now also available for you.
 
Characteristics

Fitted in a hygienic stainless steel housing that has flanges which can be mounted to a product channel
Simple operation, cleaning and maintenance
Completely cleanable with water and even steam (water-resistant version)
Product dust does not adhere to surface
Compact unit, easy to integrate into existing process


Types

Several dimensions and executions available

These 'LenaStar' pharma drum magnets in housing have an extra high-class hygienic design ánd they are equipped with a super strong 12,000 gauss magnetic drum. As a result, they filter even the smallest ferrous, weakly and even paramagnetic particles, such as: stones, mud, insect excrement, from your dried raw materials (eg tea, herbs).
 
Other types:

Our basic type drum magnets in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. The magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of magnetic contaminants

A drum magnet continuously and fully automatically separates ferrous particles, such as iron, steel and stainless steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the particles out of the magnetic field.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.

Product inlet size : 1600x250 mm
SETK-165-SD-B-30S2-NA-FZB-B-B
SKU: SRTK160054
Stock *: 0
Max. capacity: 300 m³/h
Product outlet size: 1730x275 mm
Fe-parts outlet size: 1730x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 1400x250 mm
SETK-145-SD-B-30S2-NA-FZB-B-B
SKU: SRTK140054
Stock *: 0
Max. capacity: 250 m³/h
Product outlet size: 1530x275 mm
Fe-parts outlet size: 1530x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 1200x250 mm
SETK-125-SD-B-30S2-NA-FZB-B-B
SKU: SRTK120054
Stock *: 0
Max. capacity: 215 m³/h
Product outlet size: 1330x275 mm
Fe-parts outlet size: 1330x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 1000x250 mm
SETK-105-SD-B-30S2-NA-FZB-B-B
SKU: SRTK100054
Stock *: 0
Max. capacity: 180 m³/h
Product outlet size: 1140x275 mm
Fe-parts outlet size: 1140x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 1000x200 mm
SETK-104-SD-B-30S2-NA-FZB-B-B
SKU: SRTK100044
Stock *: 0
Max. capacity: 150 m³/h
Product outlet size: 1130x250 mm
Fe-parts outlet size: 1130x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 800x200 mm
SETK-084-SD-B-30S2-NA-FZB-B-B
SKU: SRTK080044
Stock *: 0
Max. capacity: 120 m³/h
Product outlet size: 930x250 mm
Fe-parts outlet size: 930x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 800x150 mm
SETK-083-SD-B-30S2-NA-FZB-B-B
SKU: SRTK080034
Stock *: 0
Max. capacity: 70 m³/h
Product outlet size: 930x175 mm
Fe-parts outlet size: 930x120 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 600x200 mm
SETK-064-SD-B-30S2-NA-FZB-B-B
SKU: SRTK060044
Stock: 1
Max. capacity: 90 m³/h
Product outlet size: 730x250 mm
Fe-parts outlet size: 730x150 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 600x150 mm
SETK-063-SD-B-30S2-NA-FZB-B-B
SKU: SRTK060034
Stock *: 0
Max. capacity: 52 m³/h
Product outlet size: 730x175 mm
Fe-parts outlet size: 730x120 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Product inlet size : 400x150 mm
SETK-043-SD-B-30S2-NA-FZB-B-B
SKU: SRTK040034
Stock: 1
Max. capacity: 35 m³/h
Product outlet size: 530x175 mm
Fe-parts outlet size: 530x120 mm
These magnetic drum separators are industrially finished. They remove 1-5 mm ferrous contaminants from all kinds of non-food powders and granulates. This basic type is equipped with a 3000 gauss strong magnetic drum.

For recycling or metal separation
Capacity up to 300 m³/h
Adjustable magnetic field
Continuous automatic cleaning
Ferriet/neodymium magnet (3000 gauss on shell)

Application

Non-food powders, granulates & fibres
Prevention of ferromagnetic contamination in your finished product.
Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

Due to the continuous cleaning, the magnetic drum separator is very suitable for product flows with heavy magnetic particle contamination. You can use them in free-fall pipelines, or after a vibrating chute in belt conveyors.
 
These drum magnets are industrially finished. They remove 1-5 mm ferrous impurities from all kinds of non-food powders and granulates.

Types

Different types for different applications

These basic type magnetic drum separators in housing are suitable for high capacity coarser raw materials like granules and fibres in the plastics and ceramics industries. By default the magnetic drum is only available in 3000 gauss magnetic strength, which is sufficient in most cases.
 
Other types:

Our food type drum magnets in housing have a hygienic design to prevent against bacterial growth. Food type drum magnets are available by default in magnetic strengths 3000, 6000 and 9000 gauss. This enables them to filter larger to smaller ferrous and even weakly magnetic particles.
Our pharma type drum magnets in housing have an extra high class hygienic design AND they are executed with a 12,000 gauss drum. This enables them to even filter the smallest ferrous, weakly and even paramagnetic particles such as: stones, mud, insect excrement, etc. from your dried raw materials (e.g. tea, spices).


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering and disposal of magnetic impurities

These drum magnets continuously and fully automatically separate ferrous particles, such as iron and steel.
 
A drum magnet is a stationary (180°) magnet segment, with a stainless steel rotating drum. The magnet attracts magnetic particles that are in the product. The drum carries the attached particles with it to the bottom of the drum. There the particles drop off and can be collected and carried away. For strongly magnetic particles, carriers are placed on the drum to ‘push’ the separated ferrous particles out of the magnetic field for further discharging.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the magnetic particles.
 
The advantage of a drum magnet is that it is a continuous cleaning/separating system, in which it is not necessary to stop the product flow to remove the trapped magnetic particles.

Set counter flanges + O-rings Hydrohansu Ø250 mm | Hygienic
SET HYDROFORM CONTRA FLANGES/O
SKU: E0103986
Stock *: 0
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Electrical proximity sensor REED contact - Normally open
SENSOR SME-8M-DS-24V-K-2,5-OE
SKU: 83.9900015
Stock: 56
Power supply: 24 V DC
Sensors and switches are designed for the control, safety and automation of our magnet systems. They are easy to build into our systems. To ensure the safety of our products, the most important sensors are often already built in. This is to guard against, for example, vibration or overheating. Some sensors are optional, for example, for detecting different switching positions (on/off).

Quality and reliability
ATEX II 1/2 D possible
Easily integrated

Product inlet/outlet size : 1500x300 mm
SEK-P-1500-3-FN-DC-Ex
SKU: SRKP150035
Stock *: 0
Max. capacity: 300 m³/h
No of magnets: 3
Build-in length: 1165 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : 1250x300 mm
SEK-P-1250-3-FN-DC-Ex
SKU: SRKP125035
Stock *: 0
Max. capacity: 240 m³/h
No of magnets: 3
Build-in length: 1165 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : 1000x300 mm
SEK-P-1000-3-FN-DC-Ex
SKU: SRKP100035
Stock *: 0
Max. capacity: 200 m³/h
No of magnets: 3
Build-in length: 1165 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : 800x200 mm
SEK-P-0800-3-FN-DC-Ex
SKU: SRKP080035
Stock *: 0
Max. capacity: 140 m³/h
No of magnets: 3
Build-in length: 885 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : 600x200 mm
SEK-P-0600-3-FN-DC-Ex
SKU: SRKP060035
Stock *: 0
Max. capacity: 90 m³/h
No of magnets: 3
Build-in length: 885 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : 400x200 mm
SEK-P-0400-3-FN-DC-Ex
SKU: SRKP040035
Stock *: 0
Max. capacity: 50 m³/h
No of magnets: 3
Build-in length: 885 mm
The robust cascade shaped housing forces the product to closely pass 3 plate magnets. Because these are placed outside the product channel, the pipe channel is unobstructed. In this way, high capacities can be processed, and a high separation efficiency is achieved.Cascade magnets filter ferrous contaminants from 0.5 to 50 mm from free falling coarse product flows, and are cleaned automatically. Application examples: bulk, animal feed, plastics, ceramics and recycling industries.

Capacity up to 300 m³/h
Capture Fe particles from 0.5 mm
Max. particle size 50 mm
ATEX II 1/2 D
Automatic cleaning (discontinuous)

Application

For coarse, high capacity material flows

Cascade magnets filter ferrous contaminants - such as iron and steel - out of granulates, fibres and coarser product flows in high capacity free-fall pipelines. 
 
They are often used in the bulk, animal feed, plastics, ceramic and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
The robust housing has 3 cascade stages by default. Each stage has a plate magnet against the outside of the housing. These plate magnets have a powerful and deep magnetic field, that extracts the ferrous particles out of the product flow. They retain those ferrous particles until they are cleaned. The last magnet is an extra strong neodymium version to obtain an even better separation efficiency.
 
The magnets are clamped against the housing by pneumatic cylinders, also when air pressure is lost.
 
Summary of important specifications

Magnet quality: ferrite / neodymium
Materials - in contact with product: stainless steel
Finishing: painted
ATEX marking: Ex II 1/2
Dust/water protection class: IP54
Solenoid valve electric supply: 24 V DC
Pneumatic supply: max. 6 bar


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The plate magnets have a powerful and deep magnetic field, with which they pull the ferrous particles from the product flow. The ferrous parts are clamped against the magnet and held there until they are cleaned.
 
How does the cleaning / iron discharging work?
With the cascade magnets, you must stop the product flow in order to clean the magnets from filtered ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Send the signal to the controller to start a cleaning cycle
After a start signal is sent the cleaning process is performed completely automatically, via a pneumatic sequence circuit:

iron discharge valve opens to its iron discharge position
magnets move away from the housing – the iron falls off and is discharged via the iron discharge chute
magnets are pulled back against the housing
iron discharge valve closes to its production position
Restart the product flow

Product inlet/outlet size : Ø200 mm
SECF-P-D200-09E-N-F1m-W-B-B
SKU: SECFQ20030
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 9 (4+5)
Weight: 23 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø150 mm
SECF-P-D150-07E-N-F1m-W-B-B
SKU: SECFQ15030
Stock *: 0
Capacity: 7 to 18 m³/h
No of bars: 7 (3+4)
Weight: 15 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø100 mm
SECF-P-D100-05E-N-F1m-W-B-B
SKU: SECFQ10030
Stock *: 0
Capacity: 2 to 6 m³/h
No of bars: 5 (2+3)
Weight: 9.3 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #250 mm
SECF-P-2525-09E-N-F1m-W-B-B
SKU: SECFP25030
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 9 (4+5)
Weight: 19 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #180 mm
SECF-P-1818-07E-N-F1m-W-B-B
SKU: SECFP18030
Stock *: 0
Capacity: 7 to 18 m³/h
No of bars: 7 (3+4)
Weight: 13 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #120 mm
SECF-P-1212-05E-N-F1m-W-B-B
SKU: SECFP12030
Stock *: 0
Capacity: 2 to 6 m³/h
No of bars: 5 (2+3)
Weight: 8 kg
Suitable for magnetic filtering of small amounts of fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall and low-pressure transport pipes up to 1.5 bar.Industrial finish - grit blasting Ra 3 µm.

Manual quick cleaning
Pressure-tight up to 1.5 bar
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
2 magnetic grids, placed in cascade
Capacity 2 - 30 m³/h

Application

Powders & granulates in low-pressure lines up to 1.5 bar

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall and low-pressure pipelines up to 1.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.
 
Hygienic versions are only available upon request.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23 mm for 'quick cleaning'
Magnet quality N-42, 8,000 gauss on tube Ø25
Housing pressure-tight up-to 1.5 bar
Materials in contact with product: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available accessories & options

Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø300 mm
SECF-B-D300-13E-N-F1E-W-B-B
SKU: SECF300638
Stock *: 0
Capacity: 18 to 45 m³/h
No of bars: 13 (6+7)
Build-in length: 250 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø250 mm
SECF-B-D250-11E-N-F1E-W-B-B
SKU: SECF250638
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 11 (5+6)
Build-in length: 250 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø150 mm
SECF-B-D150-07E-N-F1E-W-B-B
SKU: SECF150638
Stock *: 0
Capacity: 3 to 7 m³/h
No of bars: 7 (3+4)
Build-in length: 250 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #346 mm
SECF-B-3535-13E-N-F5m-W-B-B
SKU: SECF350538
Stock *: 0
Capacity: 18 to 45 m³/h
No of bars: 13 (6+7)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #346 mm
SECF-B-3535-13E-N-F1E-W-B-B
SKU: SECF350438
Stock *: 0
Capacity: 18 to 45 m³/h
No of bars: 13 (6+7)
Weight: 35 kg
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #296 mm
SECF-B-3030-11E-N-F5m-W-B-B
SKU: SECF300538
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 11 (5+6)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #296 mm
SECF-B-3030-11E-N-F1E-W-S-B
SKU: SECF300438
Stock *: 0
Capacity: 12 to 30 m³/h
No of bars: 11 (5+6)
Weight: 28 kg
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #246 mm
SECF-B-2525-09E-N-F5m-W-B-B
SKU: SECF250538
Stock *: 0
Capacity: 8 to 20 m³/h
No of bars: 9 (4+5)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #196 mm
SECF-B-2020-07E-N-F5m-W-B-B
SKU: SECF200538
Stock *: 0
Capacity: 3 to 7 m³/h
No of bars: 7 (3+4)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #196 mm
SECF-B-2020-07E-N-F1E-W-B-B
SKU: SECF200438
Stock *: 0
Capacity: 3 to 7 m³/h
No of bars: 7 (3+4)
Weight: 17 kg
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #146 mm
SECF-B-1515-05E-N-F5m-W-B-B
SKU: SECF150538
Stock *: 0
Capacity: 1 to 3 m³/h
No of bars: 5 (2+3)
Build-in length: 160 mm
For magnetic filtering of small amounts, fine ferrous contaminants from granulates and dry, free-flowing powders in free-fall transport pipes.Industrial and hygienic versions available.

Manual quick cleaning
Types basic/food
2 magnetic grids, placed in cascade
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Capacity up to 45 m³/h

Application

Powders & granulates in free-fall pipes

Suitable for magnetic filtering of sporadically present, fine ferrous contaminants from granulates - such as plastics - and dry, free-flowing powders - like flour and sugar - in free-fall transport pipes.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids, placed staggered one above the other
Extractor bars Ø25/Ø23mm for 'quick cleaning'
Magnet quality neodymium N-42, 8,000 gauss on tube Ø25
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone EC1935 / FDA


Options

Available versions, options & accessories

Standard versions:

Basic type:

Industrial execution; grit blasted
Default with round or square in-/outlet
Food / pharma type:

Hygienic execution; polished
Default only with square inlet 
Options

High temperatures versions - to 140°C - not available in combination with ATEX
Steute door safety switch - for detecting if the separator is closed
White door seal instead of red
Inlet/outlet adapter pieces from square to round

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants always passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferrous particles. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
 
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.

Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Shove the complete magnet unit out of the housing
Take the magnet unit out of the extractor unit and place it away from the extractor unit on a clean surface
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Shove the complete magnet unit assembly back into the housing
Tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : #400 mm
SECE-4040-04V-ES-F1M-B-B-BB-B
SKU: E0063090
Stock *: 0
Max. capacity: 120 m³/h
No of bars: 4
Weight: 60 kg
These new 'EasyClean' Cleanflows have the great advantage that you do not have to lift the magnetic grid out to clean it. Instead, you drive the grid out over a robust side guiding, after which the magnet bars automatically clean themselves of caught ferrous particles.Equipped with robust Ø50mm magnetic bars, measuring no less than 12,000 gauss at the contact surface of the bars.Suitable for magnetically removing ferrous and even weakly magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 2 bar.

Semi-automatic cleaning
Magnetic bars in pneumatic tube (Ø50 mm, 12,000 gauss)
Capture Fe and weakly magnetic particles
Pressure-tight up to 2 bar
ATEX II 1/2 D

Application

High capacity powders & granulates in lines up to 2 bar

The thick, Ø50 mm magnetic bars provide a very high separation yield, have a deep holding field and a high flux density. This ensures that not only ferromagnetic, but even weakly magnetic contaminants are captured, like grade 316 stainless steel wear particles.
 
The large distance between the bars results in these Easy Cleanflows having a significant higher capacity than Cleanflows with thinner bars, which is also beneficial when it comes to somewhat less well flowing powders.
 
Suitable for granulates and reasonably to well flowing powders in free-fall and low-pressure transport pipes up to 2 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These semi-automatic cleaning Cleanflow magnets contain 1 magnetic grid with Ø50 mm very robust magnetic bars in super strong magnet quality N52, resulting in optimal capturing of ferrous particles.
 
In case of hard to catch - very small or weak magnetic - particles, we mount a deflector grid at the separator inlet to make sure that all particles will touch or very closely pass the bars.
 
The magnetic bars are sealed stainless steel tubes inside of which the magnets are blown in and out by pneumatic force.
 
Summary of important specifications

1 Magnetic grid with Ø50 mm robust, pneumatic operated magnetic bars
Optional deflector flange for forcing the product flow towards the magnetic bars
Magnet quality neodymium N-52, f12,000 gauss on the tube
Pressure-tight up to 2 bar
Material housing: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 /FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default available options

Inlet/outlet adapter pieces from square to round
High temperatures versions - to 140°C - not available in combination with ATEX
Removable collecting tray - for collecting discharged ferrous particles
Door sensor - for detecting if the separator is closed
Deflector flange - for deflecting the product flow towards the magnet bars
Detection switch - for detecting if magnets are in / out
Surface finish polishing or wet blasting - for hygienic applications
Flange gaskets Silicone VMQ or NBR, neutral colour, all EC1935/2004 certified
Alternative for red silicone VMQ housing/magnet bar gasket ring: white Silicone or blue NBR70 - all versions are EC1935/2004 certified
Thin-walled tubes - 0.7 mm instead of 1.2 mm - over the magnetic bars, for enabling catching of weakly-magnetic particles like stainless steel


Working principle / video

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic grid with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product contaminated with ferrous particles passes the magnetic bars while flowing through the grid.
 
If necessary, optional deflector profiles ensure that the product flow cannot fall freely between the magnetic bars, but is guided towards them.
 
The magnets attract passing ferromagnetic contaminants, such as iron / steel / stainless steel wear particles. Once particles are captured they stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way enabling automatic discharge of trapped ferrous particles.
 
After the product flow has been stopped, the manual locks can be opened, after which the magnet unit must be pulled out of the product channel manually over the side guides.
 
As soon as you pull out the magnet unit to its end of reach, air pressure automatically pushes the magnets out one stage further outside within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener - annex handles
Pull the magnet unit by the handles - over the side guides - completely out of the device
In this extreme position, the magnets in the tubes automatically slide out, after which the captured metal particles automatically fall off the tubes. Collect and discharge the falling metal particles.
Push the complete magnet unit back into the product channel
While you push back the magnet unit, the magnets inside the tubes are automatically also moved back IN
Tighten the fasteners
Production can now safely be resumed

Product inlet/outlet size : #300 mm
SECE-3030-03V-ES-F1M-B-B-BB-B
SKU: E0062793
Stock *: 0
Max. capacity: 65 m³/h
No of bars: 3
Weight: 45 kg
These new 'EasyClean' Cleanflows have the great advantage that you do not have to lift the magnetic grid out to clean it. Instead, you drive the grid out over a robust side guiding, after which the magnet bars automatically clean themselves of caught ferrous particles.Equipped with robust Ø50mm magnetic bars, measuring no less than 12,000 gauss at the contact surface of the bars.Suitable for magnetically removing ferrous and even weakly magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 2 bar.

Semi-automatic cleaning
Magnetic bars in pneumatic tube (Ø50 mm, 12,000 gauss)
Capture Fe and weakly magnetic particles
Pressure-tight up to 2 bar
ATEX II 1/2 D

Application

High capacity powders & granulates in lines up to 2 bar

The thick, Ø50 mm magnetic bars provide a very high separation yield, have a deep holding field and a high flux density. This ensures that not only ferromagnetic, but even weakly magnetic contaminants are captured, like grade 316 stainless steel wear particles.
 
The large distance between the bars results in these Easy Cleanflows having a significant higher capacity than Cleanflows with thinner bars, which is also beneficial when it comes to somewhat less well flowing powders.
 
Suitable for granulates and reasonably to well flowing powders in free-fall and low-pressure transport pipes up to 2 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These semi-automatic cleaning Cleanflow magnets contain 1 magnetic grid with Ø50 mm very robust magnetic bars in super strong magnet quality N52, resulting in optimal capturing of ferrous particles.
 
In case of hard to catch - very small or weak magnetic - particles, we mount a deflector grid at the separator inlet to make sure that all particles will touch or very closely pass the bars.
 
The magnetic bars are sealed stainless steel tubes inside of which the magnets are blown in and out by pneumatic force.
 
Summary of important specifications

1 Magnetic grid with Ø50 mm robust, pneumatic operated magnetic bars
Optional deflector flange for forcing the product flow towards the magnetic bars
Magnet quality neodymium N-52, f12,000 gauss on the tube
Pressure-tight up to 2 bar
Material housing: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 /FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default available options

Inlet/outlet adapter pieces from square to round
High temperatures versions - to 140°C - not available in combination with ATEX
Removable collecting tray - for collecting discharged ferrous particles
Door sensor - for detecting if the separator is closed
Deflector flange - for deflecting the product flow towards the magnet bars
Detection switch - for detecting if magnets are in / out
Surface finish polishing or wet blasting - for hygienic applications
Flange gaskets Silicone VMQ or NBR, neutral colour, all EC1935/2004 certified
Alternative for red silicone VMQ housing/magnet bar gasket ring: white Silicone or blue NBR70 - all versions are EC1935/2004 certified
Thin-walled tubes - 0.7 mm instead of 1.2 mm - over the magnetic bars, for enabling catching of weakly-magnetic particles like stainless steel


Working principle / video

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic grid with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product contaminated with ferrous particles passes the magnetic bars while flowing through the grid.
 
If necessary, optional deflector profiles ensure that the product flow cannot fall freely between the magnetic bars, but is guided towards them.
 
The magnets attract passing ferromagnetic contaminants, such as iron / steel / stainless steel wear particles. Once particles are captured they stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way enabling automatic discharge of trapped ferrous particles.
 
After the product flow has been stopped, the manual locks can be opened, after which the magnet unit must be pulled out of the product channel manually over the side guides.
 
As soon as you pull out the magnet unit to its end of reach, air pressure automatically pushes the magnets out one stage further outside within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener - annex handles
Pull the magnet unit by the handles - over the side guides - completely out of the device
In this extreme position, the magnets in the tubes automatically slide out, after which the captured metal particles automatically fall off the tubes. Collect and discharge the falling metal particles.
Push the complete magnet unit back into the product channel
While you push back the magnet unit, the magnets inside the tubes are automatically also moved back IN
Tighten the fasteners
Production can now safely be resumed

Product inlet/outlet size : #200 mm
SECE-2020-02V-ES-F1M-B-B-BB-B
SKU: E0063099
Stock *: 0
Max. capacity: 30 m³/h
No of bars: 2
Weight: 28 kg
These new 'EasyClean' Cleanflows have the great advantage that you do not have to lift the magnetic grid out to clean it. Instead, you drive the grid out over a robust side guiding, after which the magnet bars automatically clean themselves of caught ferrous particles.Equipped with robust Ø50mm magnetic bars, measuring no less than 12,000 gauss at the contact surface of the bars.Suitable for magnetically removing ferrous and even weakly magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 2 bar.

Semi-automatic cleaning
Magnetic bars in pneumatic tube (Ø50 mm, 12,000 gauss)
Capture Fe and weakly magnetic particles
Pressure-tight up to 2 bar
ATEX II 1/2 D

Application

High capacity powders & granulates in lines up to 2 bar

The thick, Ø50 mm magnetic bars provide a very high separation yield, have a deep holding field and a high flux density. This ensures that not only ferromagnetic, but even weakly magnetic contaminants are captured, like grade 316 stainless steel wear particles.
 
The large distance between the bars results in these Easy Cleanflows having a significant higher capacity than Cleanflows with thinner bars, which is also beneficial when it comes to somewhat less well flowing powders.
 
Suitable for granulates and reasonably to well flowing powders in free-fall and low-pressure transport pipes up to 2 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These semi-automatic cleaning Cleanflow magnets contain 1 magnetic grid with Ø50 mm very robust magnetic bars in super strong magnet quality N52, resulting in optimal capturing of ferrous particles.
 
In case of hard to catch - very small or weak magnetic - particles, we mount a deflector grid at the separator inlet to make sure that all particles will touch or very closely pass the bars.
 
The magnetic bars are sealed stainless steel tubes inside of which the magnets are blown in and out by pneumatic force.
 
Summary of important specifications

1 Magnetic grid with Ø50 mm robust, pneumatic operated magnetic bars
Optional deflector flange for forcing the product flow towards the magnetic bars
Magnet quality neodymium N-52, f12,000 gauss on the tube
Pressure-tight up to 2 bar
Material housing: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 /FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default available options

Inlet/outlet adapter pieces from square to round
High temperatures versions - to 140°C - not available in combination with ATEX
Removable collecting tray - for collecting discharged ferrous particles
Door sensor - for detecting if the separator is closed
Deflector flange - for deflecting the product flow towards the magnet bars
Detection switch - for detecting if magnets are in / out
Surface finish polishing or wet blasting - for hygienic applications
Flange gaskets Silicone VMQ or NBR, neutral colour, all EC1935/2004 certified
Alternative for red silicone VMQ housing/magnet bar gasket ring: white Silicone or blue NBR70 - all versions are EC1935/2004 certified
Thin-walled tubes - 0.7 mm instead of 1.2 mm - over the magnetic bars, for enabling catching of weakly-magnetic particles like stainless steel


Working principle / video

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
The magnetic grid with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product contaminated with ferrous particles passes the magnetic bars while flowing through the grid.
 
If necessary, optional deflector profiles ensure that the product flow cannot fall freely between the magnetic bars, but is guided towards them.
 
The magnets attract passing ferromagnetic contaminants, such as iron / steel / stainless steel wear particles. Once particles are captured they stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way enabling automatic discharge of trapped ferrous particles.
 
After the product flow has been stopped, the manual locks can be opened, after which the magnet unit must be pulled out of the product channel manually over the side guides.
 
As soon as you pull out the magnet unit to its end of reach, air pressure automatically pushes the magnets out one stage further outside within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener - annex handles
Pull the magnet unit by the handles - over the side guides - completely out of the device
In this extreme position, the magnets in the tubes automatically slide out, after which the captured metal particles automatically fall off the tubes. Collect and discharge the falling metal particles.
Push the complete magnet unit back into the product channel
While you push back the magnet unit, the magnets inside the tubes are automatically also moved back IN
Tighten the fasteners
Production can now safely be resumed

Product inlet/outlet size : #400 mm
SECD-4040-14P-N-F1H-V-P-B-E
SKU: SECD400016
Stock: 0
Max. capacity: 90 m³/h
No of bars: 14 (7+7)
Build-in length: 924 mm
For magnetic filtering of small amounts of ferrous contaminants from dusty, free-flowing powders in free-fall transport pipes.The automatic cleaning makes this type suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.Industrial finish - grit blasting Ra 3 µm

Automatic cleaning (discontinuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø25 mm, 11,000 gauss)
Dust-proof
ATEX II 1/2 D

Application

Dusty powders in free-fall pipes

These automatic, discontinuously cleaning, dust-proof Cleanflows are especially suitable for dusty powders with a small amount of ferrous impurities.
 
Also suitable for non-dusty powders & granulates, but NOT for sticky powders that cause blockages. For those applications the rotating versions of this type Cleanflows are a better solution.
 
The automatic cleaning makes them suitable for badly accessible situations.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids with Ø25 magnetic bars, placed staggered one above the other
Pneumatic bar and valve movement
Magnet quality: neodymium N-42, 11,000 gauss on the tube
Dust-proof housing
Material housing: AISI304 / AISI316(L)
Finish: grit blasting
Material gaskets/seals: Silicone EC1935 / FDA


Options

Available accessories & options

Online available accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Available options

Integrated valve box for ferrous particles disposal
(our advice: always order with corresponding valve box for trouble-free operation)
Iron discharge cycle control:

Pneumatic control -> start by local push button
Siemens LOGO! PLC control -> start by local push button or from control room


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, air pressure automatically pushes the magnets out within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product stream
Give start signal to the magnet's control unit

Now first the valve in the valve box is automatically switched to iron discharge position
Then the magnets inside the pneumatic tubes are moved automatically out of the product channel
The captured metal particles want to 'travel' with the magnets, but are held by retainer rings on the magnet bar tubes. As soon as the magnets are out of reach, the captured particles automatically drop off of the tubes, into the valve box, where they are discharged further
Then the magnets inside the pneumatic tubes are moved automatically back into the product channel
When the magnets are all back in, the valve will automatically be switched back to its production position
As soon as the magnets and valve are back in production position, the control will give a 'ready for production' signal
You can now safely resume production

Product inlet/outlet size : #400 mm
SECD-4040-14P-N-F1H-B-P-B-E
SKU: SECD400012
Stock: 0
Max. capacity: 90 m³/h
No of bars: 14 (7+7)
Build-in length: 220 mm
For magnetic filtering of small amounts of ferrous contaminants from dusty, free-flowing powders in free-fall transport pipes.The automatic cleaning makes this type suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.Industrial finish - grit blasting Ra 3 µm

Automatic cleaning (discontinuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø25 mm, 11,000 gauss)
Dust-proof
ATEX II 1/2 D

Application

Dusty powders in free-fall pipes

These automatic, discontinuously cleaning, dust-proof Cleanflows are especially suitable for dusty powders with a small amount of ferrous impurities.
 
Also suitable for non-dusty powders & granulates, but NOT for sticky powders that cause blockages. For those applications the rotating versions of this type Cleanflows are a better solution.
 
The automatic cleaning makes them suitable for badly accessible situations.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids with Ø25 magnetic bars, placed staggered one above the other
Pneumatic bar and valve movement
Magnet quality: neodymium N-42, 11,000 gauss on the tube
Dust-proof housing
Material housing: AISI304 / AISI316(L)
Finish: grit blasting
Material gaskets/seals: Silicone EC1935 / FDA


Options

Available accessories & options

Online available accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Available options

Integrated valve box for ferrous particles disposal
(our advice: always order with corresponding valve box for trouble-free operation)
Iron discharge cycle control:

Pneumatic control -> start by local push button
Siemens LOGO! PLC control -> start by local push button or from control room


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, air pressure automatically pushes the magnets out within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product stream
Give start signal to the magnet's control unit

Now first the valve in the valve box is automatically switched to iron discharge position
Then the magnets inside the pneumatic tubes are moved automatically out of the product channel
The captured metal particles want to 'travel' with the magnets, but are held by retainer rings on the magnet bar tubes. As soon as the magnets are out of reach, the captured particles automatically drop off of the tubes, into the valve box, where they are discharged further
Then the magnets inside the pneumatic tubes are moved automatically back into the product channel
When the magnets are all back in, the valve will automatically be switched back to its production position
As soon as the magnets and valve are back in production position, the control will give a 'ready for production' signal
You can now safely resume production

Product inlet/outlet size : #320 mm
SECD-3232-11P-N-F1H-V-P-B-E
SKU: SECD320016
Stock: 0
Max. capacity: 60 m³/h
No of bars: 11 (5+6)
Build-in length: 824 mm
For magnetic filtering of small amounts of ferrous contaminants from dusty, free-flowing powders in free-fall transport pipes.The automatic cleaning makes this type suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.Industrial finish - grit blasting Ra 3 µm

Automatic cleaning (discontinuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø25 mm, 11,000 gauss)
Dust-proof
ATEX II 1/2 D

Application

Dusty powders in free-fall pipes

These automatic, discontinuously cleaning, dust-proof Cleanflows are especially suitable for dusty powders with a small amount of ferrous impurities.
 
Also suitable for non-dusty powders & granulates, but NOT for sticky powders that cause blockages. For those applications the rotating versions of this type Cleanflows are a better solution.
 
The automatic cleaning makes them suitable for badly accessible situations.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids with Ø25 magnetic bars, placed staggered one above the other
Pneumatic bar and valve movement
Magnet quality: neodymium N-42, 11,000 gauss on the tube
Dust-proof housing
Material housing: AISI304 / AISI316(L)
Finish: grit blasting
Material gaskets/seals: Silicone EC1935 / FDA


Options

Available accessories & options

Online available accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Available options

Integrated valve box for ferrous particles disposal
(our advice: always order with corresponding valve box for trouble-free operation)
Iron discharge cycle control:

Pneumatic control -> start by local push button
Siemens LOGO! PLC control -> start by local push button or from control room


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, air pressure automatically pushes the magnets out within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product stream
Give start signal to the magnet's control unit

Now first the valve in the valve box is automatically switched to iron discharge position
Then the magnets inside the pneumatic tubes are moved automatically out of the product channel
The captured metal particles want to 'travel' with the magnets, but are held by retainer rings on the magnet bar tubes. As soon as the magnets are out of reach, the captured particles automatically drop off of the tubes, into the valve box, where they are discharged further
Then the magnets inside the pneumatic tubes are moved automatically back into the product channel
When the magnets are all back in, the valve will automatically be switched back to its production position
As soon as the magnets and valve are back in production position, the control will give a 'ready for production' signal
You can now safely resume production

Product inlet/outlet size : #320 mm
SECD-3232-11P-N-F1H-B-P-B-E
SKU: SECD320012
Stock: 0
Max. capacity: 60 m³/h
No of bars: 11 (5+6)
Build-in length: 220 mm
For magnetic filtering of small amounts of ferrous contaminants from dusty, free-flowing powders in free-fall transport pipes.The automatic cleaning makes this type suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.Industrial finish - grit blasting Ra 3 µm

Automatic cleaning (discontinuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø25 mm, 11,000 gauss)
Dust-proof
ATEX II 1/2 D

Application

Dusty powders in free-fall pipes

These automatic, discontinuously cleaning, dust-proof Cleanflows are especially suitable for dusty powders with a small amount of ferrous impurities.
 
Also suitable for non-dusty powders & granulates, but NOT for sticky powders that cause blockages. For those applications the rotating versions of this type Cleanflows are a better solution.
 
The automatic cleaning makes them suitable for badly accessible situations.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids with Ø25 magnetic bars, placed staggered one above the other
Pneumatic bar and valve movement
Magnet quality: neodymium N-42, 11,000 gauss on the tube
Dust-proof housing
Material housing: AISI304 / AISI316(L)
Finish: grit blasting
Material gaskets/seals: Silicone EC1935 / FDA


Options

Available accessories & options

Online available accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Available options

Integrated valve box for ferrous particles disposal
(our advice: always order with corresponding valve box for trouble-free operation)
Iron discharge cycle control:

Pneumatic control -> start by local push button
Siemens LOGO! PLC control -> start by local push button or from control room


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, air pressure automatically pushes the magnets out within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product stream
Give start signal to the magnet's control unit

Now first the valve in the valve box is automatically switched to iron discharge position
Then the magnets inside the pneumatic tubes are moved automatically out of the product channel
The captured metal particles want to 'travel' with the magnets, but are held by retainer rings on the magnet bar tubes. As soon as the magnets are out of reach, the captured particles automatically drop off of the tubes, into the valve box, where they are discharged further
Then the magnets inside the pneumatic tubes are moved automatically back into the product channel
When the magnets are all back in, the valve will automatically be switched back to its production position
As soon as the magnets and valve are back in production position, the control will give a 'ready for production' signal
You can now safely resume production

Product inlet/outlet size : #240 mm
SECD-2424-08P-N-F1H-B-P-B-E
SKU: SECD240012
Stock: 0
Max. capacity: 30 m³/h
No of bars: 8 (4+4)
Build-in length: 220 mm
For magnetic filtering of small amounts of ferrous contaminants from dusty, free-flowing powders in free-fall transport pipes.The automatic cleaning makes this type suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.Industrial finish - grit blasting Ra 3 µm

Automatic cleaning (discontinuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø25 mm, 11,000 gauss)
Dust-proof
ATEX II 1/2 D

Application

Dusty powders in free-fall pipes

These automatic, discontinuously cleaning, dust-proof Cleanflows are especially suitable for dusty powders with a small amount of ferrous impurities.
 
Also suitable for non-dusty powders & granulates, but NOT for sticky powders that cause blockages. For those applications the rotating versions of this type Cleanflows are a better solution.
 
The automatic cleaning makes them suitable for badly accessible situations.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Summary of important specifications

2 Magnetic grids with Ø25 magnetic bars, placed staggered one above the other
Pneumatic bar and valve movement
Magnet quality: neodymium N-42, 11,000 gauss on the tube
Dust-proof housing
Material housing: AISI304 / AISI316(L)
Finish: grit blasting
Material gaskets/seals: Silicone EC1935 / FDA


Options

Available accessories & options

Online available accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Available options

Integrated valve box for ferrous particles disposal
(our advice: always order with corresponding valve box for trouble-free operation)
Iron discharge cycle control:

Pneumatic control -> start by local push button
Siemens LOGO! PLC control -> start by local push button or from control room


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, air pressure automatically pushes the magnets out within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence

Stop the product stream
Give start signal to the magnet's control unit

Now first the valve in the valve box is automatically switched to iron discharge position
Then the magnets inside the pneumatic tubes are moved automatically out of the product channel
The captured metal particles want to 'travel' with the magnets, but are held by retainer rings on the magnet bar tubes. As soon as the magnets are out of reach, the captured particles automatically drop off of the tubes, into the valve box, where they are discharged further
Then the magnets inside the pneumatic tubes are moved automatically back into the product channel
When the magnets are all back in, the valve will automatically be switched back to its production position
As soon as the magnets and valve are back in production position, the control will give a 'ready for production' signal
You can now safely resume production

Product inlet/outlet size : #400 mm
SECC-4040-09S-N-Ex-F1E-L-B-B
SKU: SECC400201
Stock *: 0
Max. capacity: 90 m³/h
No of bars: 9 (4+5)
Weight: 174 kg
This unique Cleanflow type discharges the filtered ferrous contaminants during production. So no production stop is required. The time-interval controlled discharge of ferrous particles makes it suitable for product streams with relatively much ferrous contamination.Suitable for granulates and dry, free-flowing powders in free-fall transport pipes.The automatically controlled discharging of captured ferrous particles makes this type of Cleanflows suitable for places where they are hardly or not accessible for operation.

Automatic cleaning (continuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø34 mm, 9400 gauss)
Capacity 30 - 90 m³/h
ATEX II 1/2 D

Application

Powders & granulates with relatively much ferrous impurities

Suitable for granulates and free-flowing powders with relatively large amounts of ferrous contaminations in non-pressurized free-fall pipes.
 
Due to the automated contral and operation they are suitable for less easily accessible situations and / or centrally managed controls.
 
Not suitable for:

When product loss is unacceptable. During a cleaning cycle some product might flow out of the product channel, together with the caught magnetic particles.
Poorly flowing sticky / fatty powders that cause clogging. For those applications the rotating versions of these Cleanflows are a better solution.


Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These automatic Cleanflow magnetic separators have 2 magnetic grids, placed staggered one above the other. They contain pneumatic magnetic bars, constructed of robust Ø34 mm SS tubes inside of which strong neodymium N42 magnet packages are moved by air pressure. The bars measure no less than 9400 gauss on the Ø34 mm tubes.
 
Summary of important specifications

Siemens LOGO! PLC control
Ø34 mm pneumatic operated magnetic bars
Magnet quality: neodymium N-42, 9400 gauss on the Ø34 mm tube
Material housing and magnetic bars: AISI304 / AISI316(L)
Finish: grit blasted
Material gaskets: PA6G acc. EC1935 / FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Version suitable for high temperatures up-to 120°C (not available for ATEX II 1/2D versions)
Magnetic bars end position detection (not available for ATEX II 1/2D versions)


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?

Production can continue during cleaning, because the magnetic bars of these Cleanflows are horizontally fixed inside the product channel. As a result, magnetic contaminants can never pass.
The pneumatic tubes enclosing the magnetic bars are horizontally fixed positioned in both the product channel and - in turn - in the left and right side chutes for iron particle discharging.
After you have given the start signal for an iron particle discharge cycle, the tubes slide over the magnets by air pressure to the left or right iron discharging chute. 
The retainer rings on the tubes hereby drag the trapped ferrous particles out of the product channel. Once outside the product channel, the ferrous particles fall off the tubes as soon as they are outside the influence of the magnets.
The time interval between 2 iron particles discharge cycles can be set locally, on the PLC control on the machine, or from your central control.

Product inlet/outlet size : #320 mm
SECC-3232-07S-N-Ex-F1E-L-B-B
SKU: SECC320201
Stock *: 0
Max. capacity: 60 m³/h
No of bars: 7 (3+4)
Weight: 145 kg
This unique Cleanflow type discharges the filtered ferrous contaminants during production. So no production stop is required. The time-interval controlled discharge of ferrous particles makes it suitable for product streams with relatively much ferrous contamination.Suitable for granulates and dry, free-flowing powders in free-fall transport pipes.The automatically controlled discharging of captured ferrous particles makes this type of Cleanflows suitable for places where they are hardly or not accessible for operation.

Automatic cleaning (continuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø34 mm, 9400 gauss)
Capacity 30 - 90 m³/h
ATEX II 1/2 D

Application

Powders & granulates with relatively much ferrous impurities

Suitable for granulates and free-flowing powders with relatively large amounts of ferrous contaminations in non-pressurized free-fall pipes.
 
Due to the automated contral and operation they are suitable for less easily accessible situations and / or centrally managed controls.
 
Not suitable for:

When product loss is unacceptable. During a cleaning cycle some product might flow out of the product channel, together with the caught magnetic particles.
Poorly flowing sticky / fatty powders that cause clogging. For those applications the rotating versions of these Cleanflows are a better solution.


Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These automatic Cleanflow magnetic separators have 2 magnetic grids, placed staggered one above the other. They contain pneumatic magnetic bars, constructed of robust Ø34 mm SS tubes inside of which strong neodymium N42 magnet packages are moved by air pressure. The bars measure no less than 9400 gauss on the Ø34 mm tubes.
 
Summary of important specifications

Siemens LOGO! PLC control
Ø34 mm pneumatic operated magnetic bars
Magnet quality: neodymium N-42, 9400 gauss on the Ø34 mm tube
Material housing and magnetic bars: AISI304 / AISI316(L)
Finish: grit blasted
Material gaskets: PA6G acc. EC1935 / FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Version suitable for high temperatures up-to 120°C (not available for ATEX II 1/2D versions)
Magnetic bars end position detection (not available for ATEX II 1/2D versions)


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?

Production can continue during cleaning, because the magnetic bars of these Cleanflows are horizontally fixed inside the product channel. As a result, magnetic contaminants can never pass.
The pneumatic tubes enclosing the magnetic bars are horizontally fixed positioned in both the product channel and - in turn - in the left and right side chutes for iron particle discharging.
After you have given the start signal for an iron particle discharge cycle, the tubes slide over the magnets by air pressure to the left or right iron discharging chute. 
The retainer rings on the tubes hereby drag the trapped ferrous particles out of the product channel. Once outside the product channel, the ferrous particles fall off the tubes as soon as they are outside the influence of the magnets.
The time interval between 2 iron particles discharge cycles can be set locally, on the PLC control on the machine, or from your central control.

Product inlet/outlet size : #240 mm
SECC-2424-05S-N-Ex-F1E-L-B-B
SKU: SECC240201
Stock: 1
Max. capacity: 30 m³/h
No of bars: 5 (2+3)
Weight: 100 kg
This unique Cleanflow type discharges the filtered ferrous contaminants during production. So no production stop is required. The time-interval controlled discharge of ferrous particles makes it suitable for product streams with relatively much ferrous contamination.Suitable for granulates and dry, free-flowing powders in free-fall transport pipes.The automatically controlled discharging of captured ferrous particles makes this type of Cleanflows suitable for places where they are hardly or not accessible for operation.

Automatic cleaning (continuous)
2 magnetic grids, placed in cascade
Magnetic bars in pneumatic tube (Ø34 mm, 9400 gauss)
Capacity 30 - 90 m³/h
ATEX II 1/2 D

Application

Powders & granulates with relatively much ferrous impurities

Suitable for granulates and free-flowing powders with relatively large amounts of ferrous contaminations in non-pressurized free-fall pipes.
 
Due to the automated contral and operation they are suitable for less easily accessible situations and / or centrally managed controls.
 
Not suitable for:

When product loss is unacceptable. During a cleaning cycle some product might flow out of the product channel, together with the caught magnetic particles.
Poorly flowing sticky / fatty powders that cause clogging. For those applications the rotating versions of these Cleanflows are a better solution.


Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These automatic Cleanflow magnetic separators have 2 magnetic grids, placed staggered one above the other. They contain pneumatic magnetic bars, constructed of robust Ø34 mm SS tubes inside of which strong neodymium N42 magnet packages are moved by air pressure. The bars measure no less than 9400 gauss on the Ø34 mm tubes.
 
Summary of important specifications

Siemens LOGO! PLC control
Ø34 mm pneumatic operated magnetic bars
Magnet quality: neodymium N-42, 9400 gauss on the Ø34 mm tube
Material housing and magnetic bars: AISI304 / AISI316(L)
Finish: grit blasted
Material gaskets: PA6G acc. EC1935 / FDA


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Version suitable for high temperatures up-to 120°C (not available for ATEX II 1/2D versions)
Magnetic bars end position detection (not available for ATEX II 1/2D versions)


Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grids with very strong neodymium magnetic bars are positioned in the middle of the product flow. The product with ferrous contaminants passes 2 magnetic bars while flowing through the separator.
 
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?

Production can continue during cleaning, because the magnetic bars of these Cleanflows are horizontally fixed inside the product channel. As a result, magnetic contaminants can never pass.
The pneumatic tubes enclosing the magnetic bars are horizontally fixed positioned in both the product channel and - in turn - in the left and right side chutes for iron particle discharging.
After you have given the start signal for an iron particle discharge cycle, the tubes slide over the magnets by air pressure to the left or right iron discharging chute. 
The retainer rings on the tubes hereby drag the trapped ferrous particles out of the product channel. Once outside the product channel, the ferrous particles fall off the tubes as soon as they are outside the influence of the magnets.
The time interval between 2 iron particles discharge cycles can be set locally, on the PLC control on the machine, or from your central control.

Product inlet/outlet size : #400 mm
SECA-4040-04V-ES-F1H-B-P-ST-B
SKU: E0106728
Stock *: 0
Max. capacity: 110 m³/h
No of bars: 4
Weight: 130 kg
These new 'EasyClean' type Cleanflows are equipped with robust Ø50mm magnetic bars, that measure no less than 12,000 gauss at the contact surface of the bars.Suitable for magnetic filtering of small amounts of ferrous and even weakly-magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 0.5 bar.The automatic cleaning makes this separator suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.

Automatic cleaning (discontinuous)
Magnetic bars in pneumatic tube (Ø50 mm, 12,000 gauss)
Capacity 30 - 110 m³/h
Pressure-tight up to 0.5 bar
Atex II 1/3 D

Application

Powders & granulates in free-fall and low-pressure pipes

This automatic cleaning Cleanflow magnet is very suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning. Via the connection box, it is possible to connect and control the magnet via the central control room. A local control box with PLC is optional.
 
The thick magnetic bars of Ø50 mm have a very high separation efficiency, due to a deep catch field and a high flux density. This ensures that not only ferromagnetic, but even weakly magnetic stainless steel contaminants are captured.
 
Due to the large distance between the magnetic bars, these Easy Cleanflows have a significantly higher capacity than the Cleanflows with thinner bars. This is also an advantage for slightly less flowing powders
 
Suitable for granulates and reasonably to well flowing powders in free-fall and low-pressure transport pipes up to 0.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These automated cleaning Cleanflow magnets contain 1 row with robust Ø50 mm magnetic bars with super strong magnet quality N52. This ensures that they optimally capture magnetic particles.
 
In case of extremely small or weakly magnetic particles, we mount a deflector grid at the separator inlet to make sure that particles cannot fall through freely, but will touch or very closely pass a magnetic bar.
 
The magnetic bars are sealed stainless steel tubes inside of which the magnets are blown in and out by air pressure.
 
Summary of important specifications

1 Magnetic grid with Ø50 mm robust, pneumatic operated magnetic bars
Optional deflector flange for guiding the product towards the magnetic bars
Magnet quality neodymium N-52, 12,000 gauss on the tube.
Housing pressure-tight up to 0.5 bar
Material housing: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available options

Default available options

Inlet/outlet adapter pieces from square to round
High temperatures versions - to 140°C - not available in combination with ATEX
Removable collecting bin - for collecting discharged ferrous particles
Deflector flange - for guiding the product flow towards the magnet bars
Surface finish polishing or wet blasting - for hygienic applications
Flange gaskets Silicone VMQ or NBR, neutral colour, all EC1935/2004 certified
Alternative for red silicone VMQ housing/magnet bar gasket ring: white Silicone, blue NBR70 or black Viton FKM70 (all versions are EC1935/2004 certified)
Thin-walled tubes - 0.7 mm instead of 1.2 mm - over the magnetic bars, for enabling catching of weakly-magnetic particles like stainless steel

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grid with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous contaminants passes the magnetic bars while flowing through the grid.
 
If necessary, an optional deflector flange will deflect the product flow towards the magnetic bars.
 
The magnets attract passing ferromagnetic contaminants; the captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, the magnet unit is automatically driven out of the product channel over the guides.
 
As soon as you pull out the magnet unit to its end of reach, air pressure automatically pushes the magnets out one stage further outside within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence:

Stop the product stream
Give start signal to the magnet's control unit

Now first the entire magnet unit is pneumatically driven out of the product channel over a robust guide
Then the magnets are pneumatically moved to their OUT position within their enveloping tubes
The captured metal particles fall from the tubes as soon as they are outside the range of the magnetic field
The magnets then automatically return to their IN position and at the same time the magnet unit is driven back inside the product channel
As soon as magnets and magnet unit are back IN the control gives a 'ready for production' signal
The production can now safely be resumed

Product inlet/outlet size : #300 mm
SECA-3030-03V-ES-F1H-B-P-ST-B-
SKU: E0104918
Stock *: 0
Max. capacity: 65 m³/h
No of bars: 3
Weight: 100 kg
These new 'EasyClean' type Cleanflows are equipped with robust Ø50mm magnetic bars, that measure no less than 12,000 gauss at the contact surface of the bars.Suitable for magnetic filtering of small amounts of ferrous and even weakly-magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 0.5 bar.The automatic cleaning makes this separator suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.

Automatic cleaning (discontinuous)
Magnetic bars in pneumatic tube (Ø50 mm, 12,000 gauss)
Capacity 30 - 110 m³/h
Pressure-tight up to 0.5 bar
Atex II 1/3 D

Application

Powders & granulates in free-fall and low-pressure pipes

This automatic cleaning Cleanflow magnet is very suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning. Via the connection box, it is possible to connect and control the magnet via the central control room. A local control box with PLC is optional.
 
The thick magnetic bars of Ø50 mm have a very high separation efficiency, due to a deep catch field and a high flux density. This ensures that not only ferromagnetic, but even weakly magnetic stainless steel contaminants are captured.
 
Due to the large distance between the magnetic bars, these Easy Cleanflows have a significantly higher capacity than the Cleanflows with thinner bars. This is also an advantage for slightly less flowing powders
 
Suitable for granulates and reasonably to well flowing powders in free-fall and low-pressure transport pipes up to 0.5 bar.
 
NOT suitable for poorly flowing sticky / fatty powders that cause blockages. Rotating Cleanflows are a better solution for those applications.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
These automated cleaning Cleanflow magnets contain 1 row with robust Ø50 mm magnetic bars with super strong magnet quality N52. This ensures that they optimally capture magnetic particles.
 
In case of extremely small or weakly magnetic particles, we mount a deflector grid at the separator inlet to make sure that particles cannot fall through freely, but will touch or very closely pass a magnetic bar.
 
The magnetic bars are sealed stainless steel tubes inside of which the magnets are blown in and out by air pressure.
 
Summary of important specifications

1 Magnetic grid with Ø50 mm robust, pneumatic operated magnetic bars
Optional deflector flange for guiding the product towards the magnetic bars
Magnet quality neodymium N-52, 12,000 gauss on the tube.
Housing pressure-tight up to 0.5 bar
Material housing: AISI316(L)
Finish: grit blasted
Material gaskets: Silicone EC1935 / FDA


Options

Available options

Default available options

Inlet/outlet adapter pieces from square to round
High temperatures versions - to 140°C - not available in combination with ATEX
Removable collecting bin - for collecting discharged ferrous particles
Deflector flange - for guiding the product flow towards the magnet bars
Surface finish polishing or wet blasting - for hygienic applications
Flange gaskets Silicone VMQ or NBR, neutral colour, all EC1935/2004 certified
Alternative for red silicone VMQ housing/magnet bar gasket ring: white Silicone, blue NBR70 or black Viton FKM70 (all versions are EC1935/2004 certified)
Thin-walled tubes - 0.7 mm instead of 1.2 mm - over the magnetic bars, for enabling catching of weakly-magnetic particles like stainless steel

 
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.

Working principle / video

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
The magnetic grid with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous contaminants passes the magnetic bars while flowing through the grid.
 
If necessary, an optional deflector flange will deflect the product flow towards the magnetic bars.
 
The magnets attract passing ferromagnetic contaminants; the captured particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Each magnetic bar has a magnet package that pneumatically moves inside a closed tube, this way automatically discharging trapped ferrous particles.
 
After you have stopped the product flow and have given the start signal for cleaning to the control, the magnet unit is automatically driven out of the product channel over the guides.
 
As soon as you pull out the magnet unit to its end of reach, air pressure automatically pushes the magnets out one stage further outside within their enclosing tubes.
 
The moving magnets in the tubes pull the captured ferrous particles along outside. However, they are stopped by a plate halfway the tube length. As soon as the magnets have traveled completely out, the captured particles drop off the tubes, into the iron discharge chute, where you collect and further discharge them.
 
Cleaning / iron discharging sequence:

Stop the product stream
Give start signal to the magnet's control unit

Now first the entire magnet unit is pneumatically driven out of the product channel over a robust guide
Then the magnets are pneumatically moved to their OUT position within their enveloping tubes
The captured metal particles fall from the tubes as soon as they are outside the range of the magnetic field
The magnets then automatically return to their IN position and at the same time the magnet unit is driven back inside the product channel
As soon as magnets and magnet unit are back IN the control gives a 'ready for production' signal
The production can now safely be resumed

Magnet dimensions : 580x204x55 mm
SCH-M-N-204x55-0600-B-B-B
SKU: E0013215
Stock *: 0
Width: 738 mm
Height: 520 mm
Weight: 67 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Magnet dimensions : 480x204x55 mm
SCH-M-N-204x55-0500-B-B-B
SKU: E0014327
Stock *: 0
Width: 638 mm
Height: 520 mm
Weight: 58 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Magnet dimensions : 430x204x55 mm
SCH-M-N-204x55-0450-B-B-B
SKU: E0015446
Stock *: 0
Width: 590 mm
Height: 520 mm
Weight: 54 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.