Diameter : 365 mm
SMR-N-D350x200-06E-S4-S
SKU: SEMR035078
Stock *: 0
Magnet quality: Neodymium GSN-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C
No of bars: 6
Weight: 9.6 kg
Magnetic grids - also called magnetic grates - are often placed at a pouring point or receiving hopper. They filter very fine magnetic and even weakly magnetic ferrous contaminants from free-flowing powders and granulates.Often used for control purposes.Manual quick-cleaning by extractor.
Optimal magnet contact
Low overall height
Capture Fe particles from 30 µm
Max. particle size 10 mm
With neodymium magnetic bars
Application
In pouring points, hoppers, as inspection before bagging, etc.
Magnetic grids filter very fine magnetic and weakly magnetic ferromagnetic contaminations from free-flowing powders and granulates. Often used for control purposes. Manual cleaning (quick cleaning).
They are used for applications in the plastics, food, pharmaceutical, ceramics and other industries. In the hopper of your injection moulding machine, for protection of your installation or as final inspection of your product, e.g. just prior to bagging.
Magnetic grids consist of several very powerful Neoflux® (neodymium) magnetic bars. These are located in the middle of your product flow and therefore even capture the smallest ferrous particles, down to 30 microns. Even stainless steel scrapings are captured. These particles are so small that they cannot even be detected by a metal detector.
An effective use is to place two magnetic grids in a cascade configuration, so the product flowing past them must contact the magnetic bars or at least pass extremely close to them. We also use this method with our Cleanflow magnets (grids in housing).
Design
Construction & materials data
Goudsmit magnetic grids are available in square and round.
The neodymium magnetic bars are provided with enveloping extractor tubes. This makes the grate robust and manual wiping unnecessary. By pulling the magnetic bar unit from the extractor tubes, the captured ferrous contaminants will fall off automatically. We call this 'manual quick-cleaning'.
The extractor tubes also serve to protect the magnetic bars, making them last longer.
Magnet quality: neodymium N-42, Br 13,300 gauss (at 20 °C), Tmax. 80 °C. (8,000 gauss on tube Ø25)
Materials - in contact with product: AISI304 (RVS 1.4301) / AISI316 (SS 1.4401)
Iron discharging / cleaning
Filtering & discharging of ferrous contaminants
The procedure for discharging the filtered ferrous particles is as follows:
stop the product flow
remove the entire grid from the product chute or hopper and place it on a pre-cleaned, non-magnetic surface (e.g. wood, aluminium or stainless steel)
remove the retainer for the two grid parts
pull the magnetic bars unit out of the extractor housing
the captured metal particles now fall off the extractor tubes. Make sure you keep the magnet bars away from these magnetic metals during this procedure.
lay the part with the magnetic bars on another well-cleaned surface
now make sure you also place the magnetic bars far enough away from the magnetic particles.
dispose of the metal contaminants
if necessary: clean all the grid parts with a dry cloth and/or suitable stainless steel cleaning fluid
mount the two grid parts and the retainer
place the grid back in the product chute or hopper
restart the product flow.
