Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 30mm open design
Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Article ID: 64673005

Precision shaft block GW ISO series 3 for shaft diameter 40mm
Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions.

Article ID: 64644000

Rod end GAW DIN 12240-4 series E external thread M36x3 left maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63483500

Rod end GAW DIN 12240-4 series E external thread M36x3 right maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63463500

Rod end GEW DIN 12240-4 series E internal thread M36x3 left maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min.
Article ID: 63433500

Rod end GEW DIN 12240-4 series E internal thread M36x3 right maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min.
Article ID: 63413500

Open Linear slide bearing PO-3-O ISO series 3 for shaft diameter 25mm
Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C.

Article ID: 64622501

SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm sealed on both sides
Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request.
Article ID: 6310-2RS1-SKF

SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm sealed on both sides clearance C3
Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request.
Article ID: 6310-2RS1-C3-SKF

Linear ball bearing unit KG-1 ISO series 1 with double rubber seals for shaft diameter 20mm stainless
Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals.
Article ID: 64699620

Linear ball bearing unit KG-1 ISO series 1 with shields for shaft diameter 20mm stainless
Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals.
Article ID: 64699520

Spherical bearing DIN 12240-4-K type SD with outer ring maintenance-free bore 25mm outer diameter 56mm stainless steel
Material: Inner ring stainless steel 1.4034, hardened, ground and polished. Bearing shell stainless steel 1.4571, with PTFE-lining. Outer ring stainless steel 1.4305. Dimensions according to DIN 648 / 12240-1 series K (wide version). Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D).
Article ID: 63399125

Spherical bearing DIN 12240-4-K type S with outer ring relubricateable bore 25mm outer diameter 56mm stainless steel == Initial lubrication required before use ==
Material: Inner ring stainless steel 1.4034, hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305.Dimensions according to DIN 648 / 12240-1 series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D).
Article ID: 63399025

Linear ball bearing KB-3 ISO series 3 with shields for shaft Ø 25mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6. Other, self-aligning versions on request. Stainless version on request.

Article ID: 64602500

Double shaft block GWD-1 ISO series 1 for shaft diameter 20mm
Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762.

Article ID: 64640220

Raw material of sintered bronze without borehole outer diameter 52mm length 60mm
Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C.
Article ID: 62339547

Open Linear ball bearing KB-3-O ISO series 3 with shields for shaft Ø 20mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64602001

Pillow block bearing unit BK 12 bore 12mm material steel black oxide finished
Material: Housing from steel, all surfaces machined, black oxide finished. With quality rolling bearings from Japan. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below.
Article ID: 64200112

Carriage for miniature profile rail guide rail width 9mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901099

Ball flange bearing TUCF 209 bore 45mm housing from thermoplast white bearing stainless steel
Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple.
Article ID: 62656045

Ball flange bearing SSUCF 207 bore 35mm housing and bearing stainless steel
Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple.
Article ID: 62699035

Splined hub with flange DIN 14 KN 46X54 length 100mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899514

Splined hub with flange DIN 14 KN 42X48 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899510

Splined hub with flange DIN 14 KN 36X42 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899512

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64899314

Splined hub with flange DIN 14 KN 46X54 length 100mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856400

Splined hub with flange DIN 14 KN 42X48 length 80mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856000

Clamp collar for splined hub DIN 14 KN 46X54 diameter 100mm steel C45
Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05.
Article ID: 64861400

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm red brass Rg7
Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64836400

Splined hub with flange DIN 14 KN 46X54 length 100mm steel C45
Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm
Article ID: 64851400

Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long steel C45
Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500,
2000 and 3000 mm. Special lengths up to 6000 mm on request (some in
stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A
straightness of 0.1 mm/m can be produced on request.

Article ID: 64841400