Open Linear ball bearing KB-3-O ISO series 3 with shields for shaft Ø 20mm
KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6 or JS6.Other, self-aligning versions on request. Stainless version on request.

Article ID: 64602001

Carriage for miniature profile rail guide rail width 12mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901129

Carriage for miniature profile rail guide rail width 9mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901099

Precision shaft steel with shaft support Ø 30h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64743003

Precision shaft steel with shaft support Ø 25h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64742503

Precision shaft steel with shaft support Ø 20h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64742003

Precision shaft steel with shaft support Ø 16h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64741603

Precision shaft steel with shaft support Ø 12h6 x 600mm long
Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request.

Article ID: 64741203

Precision shaft block GW ISO series 3 for shaft diameter 50mm
Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions.

Article ID: 64645000

Precision shaft block GW ISO series 3 for shaft diameter 40mm
Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions.

Article ID: 64644000

Locknut DIN 981 KM 20 thread M100x2 stainless steel 1.4618
Material: Stainless steel 1.4618 (AISI 201).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Article ID: 65399690

Splined hub with flange DIN 14 KN 46X54 length 100mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899514

Splined hub with flange DIN 14 KN 42X48 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899510

Splined hub with flange DIN 14 KN 36X42 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899512

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64899314

Precision shaft block GW-1 ISO series 1 for shaft diameter 50mm
Material: Extruded aluminium.

Matching linear-bearing units of ISO Series 1.
Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions.

* when mounting from above choose the next smaller screw size.

Article ID: 64645050

Ball pillow block bearing UCP 216 bore 80mm material grey cast iron
Material: Housing from grey
cast iron.

Rolling bearing from bearing steel.
With 4 mounting holes.
The rolling bearing can be swiveled when
mounting to compensate shaft misalignement.
The shaft will get fastened with 2
setscrews. Lubricated for life at normal
operating conditions. Re-lubricating is
possible.
Delivery with grease nipple.


Article ID: 62518000

Ball pillow block bearing UCP 215 bore 75mm material grey cast iron
Material: Housing from grey
cast iron.

Rolling bearing from bearing steel.
With 4 mounting holes.
The rolling bearing can be swiveled when
mounting to compensate shaft misalignement.
The shaft will get fastened with 2
setscrews. Lubricated for life at normal
operating conditions. Re-lubricating is
possible.
Delivery with grease nipple.


Article ID: 62517500

Silver steel DIN 175 115CrV3 ground and polished diameter 20h9 x 2000mm long
Unhardened, strength 700 - 800 N/mm².

Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible.

Fixed lengths can be delivered on request.


Article ID: 64722000

Splined hub with flange DIN 14 KN 46X54 length 100mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856400

Splined hub with flange DIN 14 KN 42X48 length 80mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856000

Rod end GT DIN 12240-4 series K external thread M36x2 left maintenance-free
Material:
Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K.

Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads.
Steel on PTFE-lining.
Maintenance-free.
Sliding speed up to 10 m/min.
Article ID: 63293500

Rod end GT DIN 12240-4 series K external thread M36x2 right maintenance-free
Material:
Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K.

Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads.
Steel on PTFE-lining.
Maintenance-free.
Sliding speed up to 10 m/min.
Article ID: 63283500

Clamp collar for splined hub DIN 14 KN 46X54 diameter 100mm steel C45
Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05.
Article ID: 64861400

Rod end GT DIN 12240-4 series K internal thread M36x2 left maintenance-free
Material:
Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K.

Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads.
Steel on PTFE-lining.
Maintenance-free.
Sliding speed up to 10 m/min.
Article ID: 63273500

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm red brass Rg7
Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64836400

Rod end GT DIN 12240-4 series K internal thread M36x2 right maintenance-free
Material:
Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining.

Wide version. Dimensions according to DIN 648 / 12240-4 series K.

Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads.
Steel on PTFE-lining.
Maintenance-free.
Sliding speed up to 10 m/min.
Article ID: 63263500

Splined hub with flange DIN 14 KN 46X54 length 100mm steel C45
Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm
Article ID: 64851400

Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long steel C45
Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500,
2000 and 3000 mm. Special lengths up to 6000 mm on request (some in
stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A
straightness of 0.1 mm/m can be produced on request.

Article ID: 64841400

Ball flange bearing UCF 216 bore 80mm material grey cast iron
Material: Housing from grey
cast iron.

Rolling bearing from bearing steel.

With 4 mounting holes.

The rolling bearing can be swiveled when

mounting to compensate shaft misalignement.

The shaft will get fastened with 2

setscrews. Lubricated for life at normal

operating conditions. Re-lubricating is

possible.

Technical explanations page 390.

Delivery with grease nipple.
Article ID: 62608000

Ball flange bearing UCF 215 bore 75mm material grey cast iron
Material: Housing from grey
cast iron.

Rolling bearing from bearing steel.

With 4 mounting holes.

The rolling bearing can be swiveled when

mounting to compensate shaft misalignement.

The shaft will get fastened with 2

setscrews. Lubricated for life at normal

operating conditions. Re-lubricating is

possible.

Technical explanations page 390.

Delivery with grease nipple.
Article ID: 62607500