Interface/connection dim's : DN150 acc. EN 1092-1 PN16
SFNG-150-IF-09E-HT-F1M-S-B-B
SKU: SSFNG15038
Stock *: 0
No of bars: 9
Build-in length: 410 mm
Weight: 74 kg
Robust filter for general industrial applications without risk of bacterial growth.For magnetic filtering of fine ferrous contaminants - such as stainless steel wear particles - from your liquid and powder flows in pressure pipes up to 10 bar.Manual quick-cleaning. The largest versions are additionally equipped with a removal guide, so that the magnet unit does not have to be lifted out, but can be extended.
Manual quick cleaning
Capture Fe particles from 30 µm - 2 mm
Sizes DN50-200
Max. 10 bar / 140 °C
Magnetic bars in extractor tube (Ø23|Ø25 mm, 10.700 | 8000 gauss)
Application
Liquids and powders in pressure lines
This robust magnetic filter is suitable for industrial applications where liquid mixtures and powders are transported in pressure pipes up to 10 bar.
The design and finish are industrial, meaning they are only intended for use in applications with no risk of bacterial growth.
Design
Construction & materials data
Click on a product variant to find the data sheet, drawings and other downloadable product information.
Short description
The industrial magnetic filter is a very robustly built filter, with EN 1092-1 PN16 flat flanges.
Equipped with extractor bars Ø25/Ø23 mm for manual 'quick cleaning'. See explanation in tab 'Working principle'.
Summary of important specifications
Magnetic bars Ø23/Ø25 mm
Magnet quality N-42SH, 8,000 gauss on tube Ø25 mm
Max. 10 bar / 140 °C
Inlet/outlet: DN50 - D200 (EN1092-1)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA
Options
Available versions, options & accessories
Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
Types
DN50 to DN-125: can be cleaned by manually taking the magnet unit out.
DN100-150-200: can be cleaned by sliding the entire magnet unit out over the guide and then pulling it apart.
These types are easier and faster to clean. But also more durable, because the magnet unit remains on the separator, and therefore less likely gets damaged.
Working principle
Filtering & discharging of ferrous impurities
How does the magnetic filtering work?
The magnetic unit with very strong neodymium magnetic bars is positioned in the middle of the product flow. The product with ferrous impurities passes several magnetic bars while flowing through the filter.
The magnets attract passing ferromagnetic contaminants. The captured particles stick to the magnets, while the purified product flows further.
How does the cleaning / iron discharging work?
Once the product flow is stopped, you take the entire magnetic grid unit out of the product channel.
Then pull the magnetic bars out of the extractor tubes, causing the ferrous particles to fall off the extractor tubes.
For larger passages, the cleaning is done by manually sliding the magnet unit out over guides, because these magnet units are too heavy to lift.
Cleaning / iron discharging sequence
Stop the product flow
Loosen the srew connections of the magnet unit
Lift / slide the complete magnet unit out of the housing
Take / slide the magnet unit out of the extractor unit
Small types: and place it away from the extractor unit on a clean surface.
Catch the ferrous particles that now will fall off the tubes and dispose them
Wipe clean all parts with a soft cloth and - if necessary - a suitable cleaning fluid
Shove the magnet unit back into the extractor unit
Place / shove the complete magnet unit assembly back into the housing
Re-tighten the screw connections
Restart the product flow