Goudsmit Magnetics
GAUSSMETER HGM09
Type : HG09
GAUSSMETER HGM09
SKU: 65.0000047
Stock: 7
With a gauss meter, you measure locally - on the surface - the magnetic flux density in units of tesla, gauss, Ka/m or oersted. Flux density is a measure of the amount of magnetic flux through a surface. Goudsmit also conducts magnetic measurements on site if desired.
Measures strength of magnetic field
Deliverable from stock
Readout in various units
Accurate
Various functions
Operation
Operation
Gauss meter measurements use the Hall effect as the measuring principle. The sensor captures the magnetic flux density that is perpendicular to the sensor plane. The magnetic field generates an output voltage on the sensor, which is proportional to the product of the magnetic field strength and the induced current.
1D gauss meter
Type HG09: Basic version - 1D gauss meter
For measurement on a surface. The basic version is a one-dimensional meter (1D) equipped with a single Hall sensor which measures the flux density in one direction. Suitable for: accurately measuring flux densities in one direction with a large range (max. 4.5 T) both static and alternating fields and pulses thanks to a thin measuring probe, measurements very close to the surface and in crevices measurements of fields where the local field orientation is known. This gauss meter is used to measure peak flux density of permanent and electromagnetic systems for inspections.
3D gauss meter
Type 3 Axis VGM: 3D gauss meter
The 3D meter allows you to measure magnetic fields in a free space. This gauss meter is equipped with three Hall sensors, which measure the flux density in three directions (x, y and z). Suitable for: measuring relatively low flux densities in three directions and the ensuing results - up to max. 80 mT; scanning magnetic fields with a set alarm level. Application examples: determining safe distances in connection with exposure to static magnetic fields (medical implants, projectile hazards, pregnant workers); measuring residual magnetism in products, for example before and after demagnetizing; determining local field orientation of magnetic fields.
Type: HG09
Including: Power supply unit, USB stick with user manual and calibration report, USB cable, Polarity indicator
Additional info: Power supply:
-power supply unit 100-240 V AC; 50/60 Hz; 0.3 Amax
-USB interface
-battery 2xAA 1.2 V NiMH (rechargeable)
Power consumption: ± 2.5 W
Environmental conditions: -10 to +40°C
Storage: -40 to +70°C
Mathematical functions:
-conversion of units and derived parameters
-linearization of the probe measurement
Interface: USB 2.0
Display: graphical, high-contrast LCD contrast adjustable via menu
Parameter memory in probes: Storage of the calibration values
Measuring Method: continuous acquisition of the magnetic field; conversion via 16 Bit A/D-converter; analysis via 16 bit microprocessor system
Display Updating Time: measuring values: approx. 100ms
Display Resolution: 3- to 4-digit, range-depending
Frequency range: DC/AC 0 Hz..5 kHz (effective value)
Accuracy: DC ± 0,5% (up to 15000 gauss and ± 1% from 15000 gauss; Peak ± 2%; AC ± 2%)
Peak Hold: tsignal > 250 μs
Transversal probe dimensions: ± 3.5 x 1.35 x 46 mm
Cable length: 1.5 m
Relative Operating Humidity: up to 80% relative humidity for temperatures up to 30°C, linearly decreasing to 50% relative humidity at 40°C
Width: 80 mm
Height: 145 mm
Thickness: 40 mm
Weight: 0.3 kg
Including: Power supply unit, USB stick with user manual and calibration report, USB cable, Polarity indicator
Additional info: Power supply:
-power supply unit 100-240 V AC; 50/60 Hz; 0.3 Amax
-USB interface
-battery 2xAA 1.2 V NiMH (rechargeable)
Power consumption: ± 2.5 W
Environmental conditions: -10 to +40°C
Storage: -40 to +70°C
Mathematical functions:
-conversion of units and derived parameters
-linearization of the probe measurement
Interface: USB 2.0
Display: graphical, high-contrast LCD contrast adjustable via menu
Parameter memory in probes: Storage of the calibration values
Measuring Method: continuous acquisition of the magnetic field; conversion via 16 Bit A/D-converter; analysis via 16 bit microprocessor system
Display Updating Time: measuring values: approx. 100ms
Display Resolution: 3- to 4-digit, range-depending
Frequency range: DC/AC 0 Hz..5 kHz (effective value)
Accuracy: DC ± 0,5% (up to 15000 gauss and ± 1% from 15000 gauss; Peak ± 2%; AC ± 2%)
Peak Hold: tsignal > 250 μs
Transversal probe dimensions: ± 3.5 x 1.35 x 46 mm
Cable length: 1.5 m
Relative Operating Humidity: up to 80% relative humidity for temperatures up to 30°C, linearly decreasing to 50% relative humidity at 40°C
Width: 80 mm
Height: 145 mm
Thickness: 40 mm
Weight: 0.3 kg
Click below to download the product-related documents