The model 110WXS is AIRMAR’s entry level solution for stationary, land-based weather monitoring applications. A complete multisensor WeatherStation, the 110WXS features a solar radiation shield for increased accuracy and stability of temperature and relative humidity. Ultrasonic wind measurement of wind speed and angle is virtually maintenance-free with no moving parts to wear out. Barometric pressure, as well as calculated wind chill and heat index round out the critical parameters being measured. The durable, rugged housing is IPX4 or IPX6 rated and designed to be deployed as an integral component for land-based stations.

Wind Speed and Angle
Ultrasonic Wind Measurement
Solar Radiation Shield
Air Temperature
Relative Humidity
Barometric Pressure
Data Input/Output
Solar Radiation Shield
Wind Measurement
Ultrasonic Transducers
RH Sensor
Thermistor
Barometric Pressure
Comma delimited ASCII/NMEA 0183 over RS422 or RS232, NMEA 2000® CAN

AIRMAR’s low profile ultrasonic transducer features a robust PEEK housing suitable for in-pipe flow monitoring systems. As an essential part of a these system, our transducers are deployed for measuring sewage levels, pipe flow rate, potential blockage detection as well as irrigation ditch water levels. OEM’s have their choice of M16 or M28 THREADED housings.

Applications
In-Pipe Flow Monitoring
Open Channel Flow
Wastewater Industry

AIRMAR’s low profile ultrasonic transducer features a robust PEEK housing suitable for in-pipe flow monitoring systems. As an essential part of a these system, our transducers are deployed for measuring sewage levels, pipe flow rate, potential blockage detection as well as irrigation ditch water levels. OEM’s have their choice of M16 or M28 THREADED housings.

Applications
In-Pipe Flow Monitoring
Open Channel Flow
Wastewater Industry

Maximize the coverage under your boat and see what you’ve been missing. The new TM165HW features a high-frequency range of 150 to 250 kHz and a super-wide beamwidth, averaging 30°, providing maximum coverage across the frequency band. In addition to improving the performance of Chirp-capable fishfinders, anglers using this new transducer will achieve three-times the coverage compared to standard high-frequency Chirp-ready transducers.

Wide beamwidth, together with the high-frequency range, provides vast bottom coverage and precise fish detection in the upper-water column that can sometimes go unseen with narrow-beam transducers. Airmar’s new format also creates crisper and larger return images on the display.

Compatibility:

Lowrance - All units compatible except Hook series
Raymarine - All compatible
Simrad - All compatible
Garmin - GPSMAP 7600,8600,7X2/9X2/10x2/ 12x2, GSD26
Furuno: not until V4 software later in 2020
Humminbird - Helix and Solix can be set manually. SM3000 sets parameters dynamically using XiD

Airmar TM165HW Transducer

Unlock the true potential of your fishfinder!

Designed for AUVs and ROVs

The 200m Mini Altimeter Kit is an ultra-compact altimeter kit designed for measuring height off the sea floor and underwater structures. Rated for up to 1,000 meters, the 200m Mini Altimeter delivers 99.4% accuracy at full 200 meter range with output resolution to 1 cm. The 200m Mini Altimeter delivers excellent performance from a small, lightweight configuration optimized for use on USVs and AUVs. The sensor is available in either 170 kHz or 200 kHz. With low power consumption of just 150 mA at 12 V, the 200m Mini Altimeter is perfect for powerlimited vessels. Optional water temp sensor available.

In full auto mode, the sounding rate is variable with depth; in manual mode, the sounding rate is configurable to run up to 10X per second. The data output rate and ping rate are the same in manual mode, and one ping produces one depth output. In full auto mode, the data output rate is configurable (0.1 to 25 seconds per interval). The 200m Mini Altimeter communicates NMEA 0183 serial data protocol over RS232 or RS422.

The kits consist of a 1000 m rated transducer with 15.5" (39.4 cm) cable with connector, matching bulkhead connector, transceiver board with mounting hardware, and wiring diagram. Water temp sensor optional.


View the Design Spec
View the Technical Manual

Depth, Speed-Through-Water, Water Temperature, Boat Attitude

For a product to be considered “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The new DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC based software.

Besides water temperature, depth and newly upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive, and is independent of the onboard instruments.

All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.

Airmar DST810 Smart™ Multisensor

The Airmar CAST™ App connects directly to Airmar’s Bluetooth® enabled DST810 and DX900+ Smart™ Multisensors to enable direct calibration and configuration of the sensor. Airmar CAST connects using Bluetooth® Low Energy to your Multisensor and makes configuration simple with intuitive menus and guided calibration. View data from the sensor in digital or graphical format, quickly turn on or off NMEA 2000® PGNs, configure offsets and more.

The Airmar CAST App provides a consistent and reliable way to calibrate basic and heel-compensated speed-through-water with a step-by-step guided process. For advanced speed-through-water calibration, CAST allows you to manually enter data for up to four heel angles and up to ten speeds. Prior to CAST, this feature was only available on the market through expensive PC software.

All data configurations and calibrations are stored in the multisensor and delivered to the NMEA 2000 network.

Download CAST™ from iTunes
Download CAST™ from Google Play Store

AIRMAR's ART15 Airducer Provides the Longest Ultrasonic Range Available

The ART15 is an ultrasonic Airducer which can deliver long range level measurements on both solids and liquids. With a range of up to 60 m (197'), the ART15 is ideal for applications in silos, large wells, wastewater facilities and large capacity tanks. A built-in thermistor provides ambient temperature. The ART15 is a cost-effective alternative to radar technology when level sensing over longer distances is required.

Applications
Silos
Wells
Wastewater facilities
Large capacity tanks
River crossings/bridges
Specs

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The R199 is our best-performing in-hull transducer. The large, narrow-beam, 200 kHz element supplies such incredible target detail that fishermen can discriminate between a single fish and bait at any depth. The 50 kHz array provides unparalleled deep-water performance and precise image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.

Manufacturer Part Numbers
Furuno NC—CA50/200TID-R199 W/TANK——Airmar—41-285-1-01
Garmin—010-10643-00——Airmar—41-255-1-01
Raymarine—E66076——Airmar—41-286-1-01

3 kW

Having the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and high-frequency transducer. The Chirp-ready CM599LH delivers the deep-water performance of the low frequency down to 3,000 m (10,000') plus the incredible resolution that the high-frequency band delivers.

The CM599LH is packed with a twenty-five-element, low-frequency array that operates at anywhere between 28 and 60 kHz.

The single, high-frequency ceramic operates at any frequency between 130 and 210 kHz and has a narrow (8° to 4°) beamwidth.